When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 413765 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per rfc3892, the Referred-By header in a REFER must be copied into the
referenced request (IE. The outgoing INVITE to the transfer target).
* Automatically put the Referred-By header in the outgoing INVITE message
if the SIPREFERREDBYHDR channel variable is defined with a value.
* Made chan_sip.c:get_refer_info() set SIPREFERREDBYHDR for inheritance so
chan_pjsip has a better chance to interoperate.
* Fixed refer_blind_callback() and refer_incoming_refer_request() to not
modify the data in the pointer returned by pjsip_msg_find_hdr_by_name().
It seems wrong to modify that data since the calling routine doesn't own
the buffer.
ASTERISK-23501 #close
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/3514/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413210 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
* Eliminated RAII_VAR usage in res_pjsip_messaging.c:vars_to_headers().
........
Merged revisions 413139 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a task was in-flight which required the channel or bridge lock
it was possible for the synchronous task retrieving the call-id
to deadlock as it holds those locks.
After discussing with Mark Michelson the synchronous task was
removed and the call-id accessed directly. This should be safe as
each object involved is guaranteed to exist and the call-id will
never change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@413140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412746 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412747 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues when building on SmartOS:
- channels/chan_oss.c: it makes sure soundcard.h is found
- main/Makefile: only use "-Wl,--version-script" when GNU LD is used as the Sun
Linker doesn't support that. Similar checks are already used elswhere in the
Makefile
Review: https://reviewboard.asterisk.org/r/3426
ASTERISK-23576 #close
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
........
Merged revisions 412468 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412483 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Remove unused RAII_VAR() declarations. The compiler cannot catch these
because the cleanup function "references" the unused variable. Some
actually allocated and released resources that were never used.
* Fixed some whitespace issues in stasis_bridges.c.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412399 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The failing assertion ensures that the final snapshot gets generated so
CDR records can get finalized. The only place where a channel staging
snapshot flag could be left set is in chan_sip.c:handle_request_bye().
The function could return before clearing the flag because the channel
could dissappear while the function had to have the channel unlocked.
* Fixed handle_request_bye() channel snapshot staging coverage area to not
have a return in the middle of it and be unable to clear the staging flag.
* Pushed the channel snapshot staging coverage area into
ast_rtp_instance_set_stats_vars() to ensure that the staging is not
interrutped.
* Made callers of ast_rtp_instance_set_stats_vars() not call it with any
channels or channel driver private locks held to eliminate the deadlock
potential. The callers must hold references to the passed in channel and
rtp objects.
* Eliminated sip_hangup() trying to get the bridge peer. It is futile at
this point because the channel could never be in a bridge.
Review: https://reviewboard.asterisk.org/r/3431/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412385 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412329 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412330 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 412115 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@412153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411716 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@411717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior too this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
........
Merged revisions 411189 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411190 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@411193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If update_provisional_keepalive() is called while
send_provisional_keepalive_full() is waiting on the PVT lock, then
pvt->provisional_keepalive_sched_id will be changed to a new sched_id
value by update_provisional_keepalive(), but that new sched_id then may
be overwritten with -1 by send_provisional_keepalive_full(), killing
the pvt's reference to a schedule and "leaking" the reference.
(closes issue ASTERISK-22079)
Review: https://reviewboard.asterisk.org/r/3368/
Reported by: Jamuel Starkey, Matteo, Leif Madsen, Steve Davies
Patches:
provisional_keepalive_fix.diff uploaded by Steve Davies (license 5012)
........
Merged revisions 411088 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 411089 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@411091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to avoid creation of the channel and
consumption of associated file descriptors altogether if the inbound
request is going to be rejected anyway.
(closes issue ASTERISK-23373)
Reported by: Corey Farrell
Patches:
chan_sip-earlier-st-1.8.patch uploaded by Corey Farrell (license 5909)
chan_sip-earlier-st-11.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 410308 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a static realtime peer with qualify=yes is loaded, Asterisk will fail to
send an OPTIONS request due to the lastms being equal to 0. This results in
the peer being unable to receive calls from Asterisk because the status is
permanently UNKNOWN.
This patch allows an OPTIONS request to be sent during module load by
ignoring the lastms value on startup only.
Review: https://reviewboard.asterisk.org/r/3294/
(closes issue ASTERISK-17523)
Reported by: Maciej Krajewski
Tested by: wushumasters
patches:
realtime_fix_11.7.0.txt uploaded by Trevor Peirce (license 6112)
........
Merged revisions 410105 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410106 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When accidentally compiling against a wrong version of
pjsip headers with a different pjsip_inv_session size,
the invite_tsx structure could be null in the answer()
function. This led to a crash because it attempted to
send the session response with an uninitialized packet
pointer. This patch presets packet to null and adds a
diagnostic log message to explain why the call fails.
Review: https://reviewboard.asterisk.org/r/3267/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408970 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch moves setting SIP_DEFER_BY_ON_TRANSFER prior to calling
ast_bridge_transfer_blind. This prevents a BYE from being sent prior to the
NOTIFY request that informs the transferor if the transfer succeeded or failed.
This patch also clears said flag from the off nominal NOTIFY paths in the
local_attended_transfer code, as once we've sent the NOTIFY request it is safe
to send by the BYE request.
This was caught by the blind-transfer-accountcode test in the Asterisk Test
Suite.
(closes issue ASTERISK-23290)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3214/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Establishing an IAX2 call between Asterisk v1.4 and v1.8 (or later)
results in an unexpected call disconnect. The problem happens because
newer values in the enum ast_control_frame_type are not consistent between
the branch versions of Asterisk.
For example:
1) v1.4 calls v1.8 (or later) using IAX2
2) v1.8 answers and sends a connected line update control frame. (on v1.8
AST_CONTROL_CONNECTED_LINE = 22)
3) v1.4 receives the control frame as an end-of-q (on v1.4
AST_CONTROL_END_OF_Q = 22)
4) v1.4 disconnects the call once the receive queue becomes empty.
Several things are done by this patch to fix the problem and attempt to
prevent it from happening again in the future:
* Added a warning at the definition of enum ast_control_frame_type about
how to add new control frame values.
* Made block sending and receiving control frames that have no reason to
go over the wire.
* Extended the connectedline iax.conf parameter to also include the
redirecting information updates.
* Updated the connectedline iax.conf parameter documentation to include a
notice that the parameter must be "no" when the peer is an Asterisk v1.4
instance.
(closes issue AST-1302)
Review: https://reviewboard.asterisk.org/r/3174/
........
Merged revisions 407678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 407727 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407729 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Locking issues in skinny when picking up a call that doesn't exist. Cleaned
up sub locking by fully removing and using the chan lock instead. Also
changed ast_call_pickup to check whether chan was masq'd.
(closes issue ASTERISK-23249)
Reported by: wedhorn
Tested by: snuffy, myself
Patches:
skinny-locking01.diff uploaded by wedhorn (license 5019)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407197 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bad offset in reading second or more fragment of skinny packets. Fixed
to offset by char (single byte) rather than size of req.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Logging from the skinny session loop was providing some incorrect reasons
for exiting the loop. Cleaned up messages and handling so correct reason
displayed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Existing code would do a full device restart when "skinny reset device"
was entered at the CLI and do a reset when "skinny reset device restart"
entered.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When endpoints get loaded their device state gets set to 'INVALID' because the
channel driver has not been loaded yet. Fixed by updating the device state for
every endpoint upon load of the channel driver.
(closes issue ASTERISK-23065)
Reported by: Rusty Newton
Review: https://reviewboard.asterisk.org/r/3123/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405643 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds Path support to chan_pjsip in res_pjsip_path.c with minimal
additions in res_pjsip_registrar.c to store the path and additions in
res_pjsip_outbound_registration.c to enable advertisement of path
support to registrars and intervening proxies.
Path information is stored on contacts and is enabled via Address of
Record (AoRs) and Registration configuration sections.
While adding path support, it became necessary to be able to add SIP
supplements that handled messages outside of sessions, so a framework
for handling these types of hooks was added in parallel to the
already-existing session supplements and several senders of
out-of-dialog requests were refactored as a result.
(closes issue ASTERISK-21084)
Review: https://reviewboard.asterisk.org/r/3050/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-12117, an improvement to insure consistant local from tags
on outbound registrations resulted in an undesirable behavior - caused
by leftover unexpired sip_pvt dialogs (with the previous cseq number),
resulting in many uncessary REGISTER requests. Instead of significant
rework of transmit_register(), this change deletes the dialogs after a
200 OK response indiciating a successful registration, keeping the old
dialogs from interfering with normal operation.
(closes issue ASTERISK-22946)
Reported by: Stephan Eisvogel
Review: https://reviewboard.asterisk.org/r/3109/
........
Merged revisions 405433 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405434 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
