https://origsvn.digium.com/svn/asterisk/trunk
........
r211876 | mnicholson | 2009-08-12 14:53:14 -0500 (Wed, 12 Aug 2009) | 11 lines
Make asterisk handle 423 Interval Too Short messages better.
This change uses separate values for the acceptable minimum expiry provided by the 423 error and the expiry value stored in the configuration file. Previously, the value pulled from the configuration file would be overwritten.
(closes issue #14366)
Reported by: Nick_Lewis
Patches:
sip-expiry-fix1.diff uploaded by mnicholson (license 96)
chan_sip.c-reqexpiry.patch uploaded by Nick (license 657)
Tested by: mnicholson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@211952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r210817 | file | 2009-08-06 14:47:04 -0300 (Thu, 06 Aug 2009) | 11 lines
Accept additional T.38 reinvites after an initial one has been handled.
Discussion of this subject has yielded that it is not actually acceptable to change
T.38 parameters after the initial reinvite but declining is harsh and can cause the
fax to fail when it may be possible to allow it to continue. This patch changes things
so that additional T.38 reinvites are accepted but parameter changes ignored. This gives
the fax a fighting chance.
(closes issue #15610)
Reported by: huangtx2009
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@210818 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208588 | mmichelson | 2009-07-24 13:31:04 -0500 (Fri, 24 Jul 2009) | 16 lines
Merged revisions 208587 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208587 | mmichelson | 2009-07-24 13:26:50 -0500 (Fri, 24 Jul 2009) | 10 lines
Only send a BYE when hanging up a channel that is up.
For cases where Asterisk sends an INVITE and receives a non 2XX final
response, Asterisk would follow the INVITE transaction by immediately
sending a BYE, which was unnecessary.
(closes issue #14575)
Reported by: chris-mac
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@208589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208548 | kpfleming | 2009-07-24 10:02:53 -0500 (Fri, 24 Jul 2009) | 8 lines
Resolve a T.38 negotiation issue left over from the udptl-updates merge.
The udptl-updates branch that was merged yesterday failed to properly send back
T.38 SDP responses with the correct error correction mode, if the incoming SDP
from the other end caused us to change error correction modes. This patch
corrects that situation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@208549 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208464 | kpfleming | 2009-07-23 16:57:24 -0500 (Thu, 23 Jul 2009) | 46 lines
Rework of T.38 negotiation and UDPTL API to address interoperability problems
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@208468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r208388 | mmichelson | 2009-07-23 14:34:49 -0500 (Thu, 23 Jul 2009) | 24 lines
Merged revisions 208386 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r208386 | mmichelson | 2009-07-23 14:24:21 -0500 (Thu, 23 Jul 2009) | 17 lines
Fix a problem where a 491 response could be sent out of dialog.
This generalizes the fix for issue 13849. The initial fix corrected the
problem that Asterisk would reply with a 491 if a reinvite were received
from an endpoint and we had not yet received an ACK from that endpoint
for the initial INVITE it had sent us. This expansion also allows Asterisk
to appropriately handle an INVITE with authorization credentials if Asterisk
had not received an ACK from the previous transaction in which Asterisk had
responded to an unauthorized INVITE with a 407.
(closes issue #14239)
Reported by: klaus3000
Patches:
14239.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@208389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207424 | mmichelson | 2009-07-20 14:48:12 -0500 (Mon, 20 Jul 2009) | 39 lines
Merged revisions 207423 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207423 | mmichelson | 2009-07-20 14:39:59 -0500 (Mon, 20 Jul 2009) | 33 lines
Answer video SDP offers properly when videosupport is not enabled.
Copied from Review board:
In issue 12434, the reporter describes a situation in which audio and video
is offered on the call, but because videosupport is disabled in sip.conf,
Asterisk gives no response at all to the video offer. According to RFC 3264,
all media offers should have a corresponding answer. For offers we do not
intend to actually reply to with meaningful values, we should still reply
with the port for the media stream set to 0.
In this patch, we take note of what types of media have been offered and
save the information on the sip_pvt. The SDP in the response will take into
account whether media was offered. If we are not otherwise going to answer
a media offer, we will insert an appropriate m= line with the port set to 0.
It is important to note that this patch is pretty much a bandage being
applied to a broken bone. The patch *only* helps for situations where video
is offered but videosupport is disabled and when udptl_pt is disabled but
T.38 is offered. Asterisk is not guaranteed to respond to every media offer.
Notable cases are when multiple streams of the same type are offered.
The 2 media stream limit is still present with this patch, too.
In trunk and the 1.6.X branches, things will be a bit different since Asterisk
also supports text in SDPs as well.
(closes issue #12434)
Reported by: mnnojd
Review: https://reviewboard.asterisk.org/r/311
Review: https://reviewboard.asterisk.org/r/313
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@207425 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r206939 | dvossel | 2009-07-17 11:13:22 -0500 (Fri, 17 Jul 2009) | 20 lines
Merged revisions 206938 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206938 | dvossel | 2009-07-17 11:05:06 -0500 (Fri, 17 Jul 2009) | 14 lines
SIP incorrect From: header information when callpres is prohib
Some ITSP make use of the "Anonymous" display name to detect a
requirement to withhold caller id across the PSTN. This does
not work if the display name is "Unknown".
(closes issue #14465)
Reported by: Nick_Lewis
Patches:
chan_sip.c-callerpres.patch uploaded by Nick (license 657)
chan_sip.c-callerpres_trunk.patch uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@206947 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r206768 | dvossel | 2009-07-15 17:04:13 -0500 (Wed, 15 Jul 2009) | 8 lines
Session timer were not activated if Supported header field in INVITE had both "timer" and other options.
(closes issue #15403)
Reported by: makoto
Patches:
sip-session-timer.patch uploaded by makoto (license
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@206775 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r206702 | dvossel | 2009-07-15 15:20:01 -0500 (Wed, 15 Jul 2009) | 10 lines
callerid(num) is wrong when username is missing
A domain only sip uri <sip:123.123.123.123> would return
123.123.123.123 as callid num. Now, if the username is
missing from a uri, the callerid num field is left empty.
(closes issue #15476)
Reported by: viraptor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@206705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205985 | dvossel | 2009-07-10 16:42:10 -0500 (Fri, 10 Jul 2009) | 16 lines
SIP register not using peer's outbound proxy
If callbackextension is defined for a peer it successfully causes
a registration to occur, but the registration ignores the
outboundproxy settings for the peer. This patch allows the
peer to be passed to obproxy_get() in transmit_register().
(closes issue #14344)
Reported by: Nick_Lewis
Patches:
callbackextension_peer_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/294/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@206017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205840 | dvossel | 2009-07-10 11:42:04 -0500 (Fri, 10 Jul 2009) | 37 lines
Merged revisions 205804 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205804 | dvossel | 2009-07-10 11:23:59 -0500 (Fri, 10 Jul 2009) | 31 lines
SIP registration auth loop caused by stale nonce
If an endpoint sends two registration requests in a very short
period of time with the same nonce, both receive 401 responses
from Asterisk, each with a different nonce (the second 401
containing the current nonce and the first one being stale).
If the endpoint responds to the first 401, it does not match
the current nonce so Asterisk sends a third 401 with a newly
generated nonce (which updates the current nonce)... Now if
the endpoint responds to the second 401, it does not match the
current nonce either and Asterisk sends a fourth 401 with a
newly generated nonce... This loop goes on and on.
There appears to be a simple fix for this. If the nonce from
the request does not match our nonce, but is a good response
to a previous nonce, instead of sending a 401 with a newly
generated nonce, use the current one instead. This breaks
the loop as the nonce is not updated until a response is
received. Additional logic has been added to make sure no
nonce can be responded to twice though.
(closes issue #15102)
Reported by: Jamuel
Patches:
patch-bug_0015102 uploaded by Jamuel (license 809)
nonce_sip.diff uploaded by dvossel (license 671)
Tested by: Jamuel
Review: https://reviewboard.asterisk.org/r/289/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@205843 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205776 | mmichelson | 2009-07-10 10:56:45 -0500 (Fri, 10 Jul 2009) | 16 lines
Merged revisions 205775 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205775 | mmichelson | 2009-07-10 10:51:36 -0500 (Fri, 10 Jul 2009) | 10 lines
Ensure that outbound NOTIFY requests are properly routed through stateful proxies.
With this change, we make note of Record-Route headers present in any SUBSCRIBE
request that we receive so that our outbound NOTIFY requests will have the proper
Route headers in them.
(closes issue #14725)
Reported by: ibc
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@205777 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205696 | kpfleming | 2009-07-09 16:20:23 -0500 (Thu, 09 Jul 2009) | 16 lines
Repair ability of SendFAX/ReceiveFAX to respond to T.38 switchover.
Recent changes in T.38 negotiation in Asterisk caused these applications to
not respond when the other endpoint initiated a switchover to T.38; this
resulted in the T.38 switchover failing, and the FAX attempt to be made
using an audio connection, instead of T.38 (which would usually cause the
FAX to fail completely).
This patch corrects this problem, and the applications will now correctly
respond to the T.38 switchover request. In addition, the response will include
the appopriate T.38 session parameters based on what the other end offered
and what our end is capable of.
(closes issue #14849)
Reported by: afosorio
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@205697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds reference counting for sip dialogs into 1.6.0.
When proc_session_timer() is called from the scheduler thread
it has no guarantee the session timer's dialog won't be freed
from underneath it. Now the session timer holds a reference
to the dialog, preventing it from being destroyed during the
middle of proc_session_timer().
(closes issue #13623)
Reported by: Nik Soggia
Review: https://reviewboard.asterisk.org/r/302/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@205117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dialog_unref() and dialog_ref() in 1.6.0 where only place holders
for reference counting once it was implemented. The functions
did nothing but return the pointer on ref and NULL on unref. These
calls have been removed to make way for a patch that actually does
dialog ref counting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@204652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204301 | mmichelson | 2009-06-29 17:50:35 -0500 (Mon, 29 Jun 2009) | 15 lines
Merged revisions 204300 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204300 | mmichelson | 2009-06-29 17:45:34 -0500 (Mon, 29 Jun 2009) | 9 lines
Add error message so that it is clear why a SIP peer was not processed when
a DNS lookup fails on a host or outboundproxy.
(closes issue #13432)
Reported by: p_lindheimer
Patches:
outboundproxy.patch uploaded by p (license 558)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@204302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204247 | mmichelson | 2009-06-29 16:48:54 -0500 (Mon, 29 Jun 2009) | 32 lines
Merged revisions 204243,204246 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204243 | mmichelson | 2009-06-29 16:23:43 -0500 (Mon, 29 Jun 2009) | 22 lines
Fix a problem where chan_sip would ignore "old" but valid responses.
chan_sip has had a problem for quite a long time that would manifest when
Asterisk would send multiple SIP responses on the same dialog before receiving
a response. The problem occurred because chan_sip only kept track of the highest
outgoing sequence number used on the dialog. If Asterisk sent two requests out,
and a response arrived for the first request sent, then Asterisk would ignore
the response. The result was that Asterisk would continue retransmitting the
requests and ignoring the responses until the maximum number of retransmissions
had been reached.
The fix here is to rearrange the code a bit so that instead of simply comparing
the sequence number of the response to our latest outgoing sequence number, we
walk our list of outstanding packets and determine if there is a match. If there is,
we continue. If not, then we ignore the response.
In doing this, I found a few completely useless variables that I have now removed.
(closes issue #11231)
Reported by: flefoll
Review: https://reviewboard.asterisk.org/r/298
........
r204246 | mmichelson | 2009-06-29 16:37:05 -0500 (Mon, 29 Jun 2009) | 3 lines
Fix build oops.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@204248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203116 | russell | 2009-06-25 11:04:10 -0500 (Thu, 25 Jun 2009) | 18 lines
Merged revisions 203115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203115 | russell | 2009-06-25 11:02:16 -0500 (Thu, 25 Jun 2009) | 11 lines
Resolve a crash related to a T.38 reinvite race condition.
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@203117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202343 | mmichelson | 2009-06-22 09:58:24 -0500 (Mon, 22 Jun 2009) | 36 lines
Merged revisions 202341-202342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202341 | mmichelson | 2009-06-22 09:42:55 -0500 (Mon, 22 Jun 2009) | 26 lines
Fix a situation in which Asterisk would not stop retransmitting 487s.
If a CANCEL were received by Asterisk, we would send a 487 in response
to the original INVITE and a 200 OK for the CANCEL. If there were a network
hiccup which caused the 200 OK and the 487 to be lost, then the UA communicating
with Asterisk may try to retransmit its CANCEL. Asterisk's response to this used
to be to try sending another 487 to the canceled INVITE and another 200 OK to the
CANCEL.
The problem here is that the originally-sent 487 was sent "reliably" meaning that
it will be retransmitted until it is received properly. So when we receive the second
CANCEL it is likely that the first batch of 487s we sent is still going strong and
reaches the UA. The result was that the second set of 487s would be retransmitted
constantly until the maximum number of retries had been reached.
The fix for this is that if we receive a second CANCEL for an INVITE, then we cancel
the retransmission of the first set of 487s and start a second set. This causes the
dialog to be terminated reasonably.
(closes issue #14584)
Reported by: klaus3000
Patches:
14584_v2.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
r202342 | mmichelson | 2009-06-22 09:44:58 -0500 (Mon, 22 Jun 2009) | 3 lines
Remove an extra debug line left from previous commit.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@202344 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202337 | mmichelson | 2009-06-22 09:35:09 -0500 (Mon, 22 Jun 2009) | 31 lines
Merged revisions 202336 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202336 | mmichelson | 2009-06-22 09:34:05 -0500 (Mon, 22 Jun 2009) | 25 lines
Fix a possible infinite loop in SDP parsing during glare situation.
There was a while loop in get_ip_and_port_from_sdp which was controlled
by a call to get_sdp_iterate. The loop would exit either if what we were
searching for was found or if the return was NULL. The problem is that
get_sdp_iterate never returns NULL. This means that if what we were searching
for was not present, the loop would run infinitely. This modification of the
loop fixes the problem.
(closes issue #15213)
Reported by: schmidts
(closes issue #15349)
Reported by: samy
(closes issue #14464)
Reported by: pj
(closes issue #15345)
Reported by: aragon
Patches:
sip_inf_loop.patch uploaded by mmichelson (license 60)
Tested by: aragon
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@202338 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201462 | mmichelson | 2009-06-17 15:10:01 -0500 (Wed, 17 Jun 2009) | 12 lines
Fix problem with no audio due to ignoring the SDP.
A recent change to our SDP version comparison made audio not function
on some calls. This was because of a test wherein we were trying to
see if an unsigned value was less than 0. This is a dumb comparison
and arguably the compiler should have warned about it. Alas, though,
it slipped past. Now it's fixed by changing the variable to be a
signed type.
Found by several developers. Tested by mnicholson and dbrooks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@201463 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r200946 | dvossel | 2009-06-16 11:03:30 -0500 (Tue, 16 Jun 2009) | 32 lines
SIP transport type issues
What this patch addresses:
1. ast_sip_ouraddrfor() by default binds to the UDP address/port
reguardless if the sip->pvt is of type UDP or not. Now when no
remapping is required, ast_sip_ouraddrfor() checks the sip_pvt's
transport type, attempting to set the address and port to the
correct TCP/TLS bindings if necessary.
2. It is not necessary to send the port number in the Contact
header unless the port is non-standard for the transport type.
This patch fixes this and removes the todo note.
3. In sip_alloc(), the default dialog built always uses transport
type UDP. Now sip_alloc() looks at the sip_request (if present)
and determines what transport type to use by default.
4. When changing the transport type of a sip_socket, the file
descriptor must be set to -1 and in some cases the tcptls_session's
ref count must be decremented and set to NULL. I've encountered
several issues associated with this process and have created a function,
set_socket_transport(), to handle the setting of the socket type.
(closes issue #13865)
Reported by: st
Patches:
dont_add_port_if_tls.patch uploaded by Kristijan (license 753)
13865.patch uploaded by mmichelson (license 60)
tls_port_v5.patch uploaded by vrban (license 756)
transport_issues.diff uploaded by dvossel (license 671)
Tested by: mmichelson, Kristijan, vrban, jmacz, dvossel
Review: https://reviewboard.asterisk.org/r/278/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r165180 | mnicholson | 2008-12-17 12:49:12 -0600 (Wed, 17 Dec 2008) | 14 lines
This patch adds a new 'ignoresdpversion' option to sip.conf. When this is
enabled (either globally or for a specific peer), chan_sip will treat any SDP
data it receives as new data and update the media stream accordingly. By
default, Asterisk will only modify the media stream if the SDP session version
received is different from the current SDP session version. This option is
required to interoperate with devices that have non-standard SDP session
version implementations (observed by toc on the bug tracker with Microsoft OCS
which always uses 0 as the session version).
http://reviewboard.digium.com/r/94/
(closes issue #13958)
Reported by: toc
Tested by: toc
........
r200689 | kpfleming | 2009-06-15 15:42:38 -0500 (Mon, 15 Jun 2009) | 12 lines
Accept T.38 re-INVITE responses with invalid SDP versions.
This commit changes the 'incoming SDP version' check logic a bit more; when
'ignoresdpversion' is *not* set for a peer, if we initiate a re-INVITE to
switch to T.38, we'll always accept the peer's SDP response, even if they
don't properly increment the SDP version number as they should. If this situation
occurs, a warning message will be generated suggesting that the peer's
configuration be changed to include the 'ignoresdpversion' configuration option
(although ideally they'd fix their SIP implementation to be RFC compliant).
AST-221
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@200724 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r199818 | dvossel | 2009-06-09 15:47:57 -0500 (Tue, 09 Jun 2009) | 11 lines
CLI NOTIFY sending wrong transport type.
SIP's cli NOTIFY command only used UDP rather than copying the transport type from the peer.
(closes issue #15283)
Reported by: jthurman
Patches:
sip-notify-tcp-svn199728.patch uploaded by jthurman (license 614)
Tested by: jthurman, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@199821 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197621 | eliel | 2009-05-28 12:01:48 -0400 (Thu, 28 May 2009) | 19 lines
Merged revisions 197562 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197562 | eliel | 2009-05-28 11:21:32 -0400 (Thu, 28 May 2009) | 13 lines
Use the address we already know when reloading a peer with nat=yes.
If we already have an address for a peer, and we are reloading the sip
configuration, try to use that address to contact the peer, instead of
getting it from the Contact.
(closes issue #15194)
Reported by: ibc
Patches:
sip.patch uploaded by eliel (license 64)
Tested by: manwe
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197606 | mmichelson | 2009-05-28 10:32:19 -0500 (Thu, 28 May 2009) | 22 lines
Recorded merge of revisions 197588 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197588 | mmichelson | 2009-05-28 10:27:49 -0500 (Thu, 28 May 2009) | 16 lines
Allow for media to arrive from an alternate source when responding to a reinvite with 491.
When we receive a SIP reinvite, it is possible that we may not be able to process the
reinvite immediately since we have also sent a reinvite out ourselves. The problem is
that whoever sent us the reinvite may have also sent a reinvite out to another party,
and that reinvite may have succeeded.
As a result, even though we are not going to accept the reinvite we just received, it
is important for us to not have problems if we suddenly start receiving RTP from a new
source. The fix for this is to grab the media source information from the SDP of the
reinvite that we receive. This information is passed to the RTP layer so that it will
know about the alternate source for media.
Review: https://reviewboard.asterisk.org/r/252
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
