* netsock2.c: Test the addr->len member first as it may be the only member
initialized in the struct.
* stun.c:ast_stun_handle_packet(): The combinded[] local array could get
used uninitialized by ast_stun_request(). The uninitialized string gets
copied to another location and could overflow the destination memory
buffer.
These valgrind findings were found for ASTERISK_27150 but are not
necessarily a fix for the issue.
Change-Id: I55f8687ba4ffc0f69578fd850af006a56cbc9a57
The fix for the issue is broken up into three parts.
This is part three which handles the client side of REGISTER requests.
The registered contact may no longer be valid on the server when the
transport used is reliable and the connection is broken.
* Re-REGISTER our contact if the reliable transport is broken after
registration completes. We attempt to re-REGISTER immediately to minimize
the time we are unreachable. Time may have already passed between the
connection being broken and the loss being detected.
* Reorder sip_outbound_registration_state_alloc() so the STATSD_GUAGE's
are still correct if an allocation failure happens.
ASTERISK-27147
Change-Id: I3668405b1ee75dfefb07c0d637826176f741ce83
The fix for the issue is broken up into three parts.
This is part two which handles the server side of REGISTER requests when
rewrite_contact is enabled. Any registered reliable transport contact
becomes invalid when the transport connection becomes disconnected.
* Monitor the rewrite_contact's reliable transport REGISTER contact for
shutdown. If it is shutdown then the contact must be removed because it
is no longer valid. Otherwise, when the client attempts to re-REGISTER it
may be blocked because the invalid contact is there. Also if we try to
send a call to the endpoint using the invalid contact then the endpoint is
not likely to see the request. The endpoint either won't be listening on
that port for new connections or a NAT/firewall will block it.
* Prune any rewrite_contact's registered reliable transport contacts on
boot. The reliable transport no longer exists so the contact is invalid.
* Websockets always rewrite the REGISTER contact address and the transport
needs to be monitored for shutdown.
* Made the websocket transport set a unique name since that is what we use
as the ao2 container key. Otherwise, we would not know which transport we
find when one of them shuts down. The names are also used for PJPROJECT
debug logging.
* Made the websocket transport post the PJSIP_TP_STATE_CONNECTED state
event. Now the global keep_alive_interval option, initially idle shutdown
timer, and the server REGISTER contact monitor can work on wetsocket
transports.
* Made the websocket transport set the PJSIP_TP_DIR_INCOMING direction.
Now initially idle websockets will automatically shutdown.
ASTERISK-27147
Change-Id: I397a5e7d18476830f7ffe1726adf9ee6c15964f4
The fix for the issue is broken up into three parts.
This is part one which refactors the transport state monitor code to allow
more modules to be able to monitor transports.
* Pull the management of PJPROJECT's transport state callback code from
res_pjsip_transport_management.c into res_pjsip. Now other modules can
dynamically add and remove themselves from transport monitoring without
worrying about breaking PJPROJECT's callback chain.
* Add the ability for other modules to get a callback whenever a specific
transport is shutdown.
ASTERISK-27147
Change-Id: I7d9a31371eb1487c9b7050cf82a9af5180a57912
When handling an incoming SIP MESSAGE, PJSIP
attaches the IP address that the message was
received from to the message in the variable
PJSIP_RECVADDR. When the IP address is IPv6
the :PORT appended results in an unparseable
mess. By using an additional bit flag on the
pj_sockaddr_print call, the conventional use
of brackets around the address is achieved.
ASTERISK-27193 #close
Change-Id: I12342521f2ce87a5b6e4883d480a3fd957aa9fd9
Asterisk wasn't generating or forwarding RTCP packets when native
bridge was activated. Also the stats weren't available via
CHANNEL(qos). Now the RTCP stats are always calculated.
ASTERISK-27158 #close
Change-Id: I46fb8f61c95e836b9d2dda6054b0cf205c16037b
Introduce a new property to rtp-engine to make it aware of
the desire for assymetric codecs or not. If asymmetric codecs
is not allowed, the bridge will compare read/write formats
and shut down the p2p bridge if needed
ASTERISK-26745 #close
Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f
'--with-pjproject-bundled' is now the default when running
./configure. It can be disabled with '--without-pjproject-bundled'.
To make building without an internet connection easier, a new
./configure option '--with-download-cache' was added that sets
the cache for externals (like pjproject, the codecs and the DPMA),
AND the sounds files. It can also be specified as an environment
variable named "AST_DOWNLOAD_CACHE". The existing
'--with-sounds-cache' option / SOUNDS_CACHE_DIR env variable and
'--with-externals-cache' option / EXTERNALS_CACHE_DIR env variable
remain and if specified, will override '--with-downloads-cache'.
ASTERISK-27189
Change-Id: Ifa9783fddf44aafadb060c9feba713dfa81d38ce
A change was made long ago where the session was kept around
until the underlying INVITE session had been destroyed. This
had the side effect of also keeping the underlying media resources
around for this time as well.
This change ensures that when we are told to terminate the
session we immediately release any media sessions associated
with it.
ASTERISK-27110
Change-Id: I643e431d5c3bf05cda220c1d39e824a505a29b82
This adds a way to access information passed along with SIP headers in
a REFER message that initiates a transfer. Headers matching a dialplan
variable GET_TRANSFERRER_DATA in the transferrer channel are added to
a HASH object TRANSFER_DATA to be accessed with functions HASHKEY and HASH.
The variable GET_TRANSFERRER_DATA is interpreted to be a prefix for
headers that should be put into the hash. If not set, no headers are
included. If set to a string (perhaps 'X-' in a typical case), all headers
starting this string are added. Empty string matches all headers.
If there are multiple of the same header, only the latest occurrence in
the REFER message is available in the hash.
Obviously, the variable GET_TRANSFERRER_DATA must be inherited by the
referrer channel, and should be set with the '_' or '__' prefix.
I avoided a specific reference to SIP or REFER, as in my mind the mechanism
can be generalized to other channel techs.
ASTERISK-27162
Change-Id: I73d7a1e95981693bc59aa0d5093c074b555f708e
This change fixes a few locking issues and some video misrouting.
1. When accessing the stream topology of a channel the channel lock
must be held to guarantee the topology remains valid.
2. When a channel was joined to a bridge the bridge specific
implementation for stream mapping was not invoked, causing video
to be misrouted for a brief period of time.
ASTERISK-27182
Change-Id: I5d2f779248b84d41c5bb3896bf22ba324b336b03
joint_cap needs to be released unconditionally as chan->tech->requester
does not steal the reference even on success.
ASTERISK-27180 #close
Change-Id: I647728992559bdb0a9c7357c20be1b36400d68b6
Currently, the handling of the msid attribute is not quite right. According to
the spec the msid's between the offer/answer are not dependent upon one another.
Meaning the same msid's given in an offer do not have to be returned in the
answer for a given stream. And they probably shouldn't be (copied/reused) since
this can potentially cause some browser side confusion.
This patch generates new msids when both an offer and answer are sent from
Asterisk. However, Asterisk does reuse the original msid it sent out for a
reinvite. Also audio+video streams are paired together by sharing the same
stream id, but a different track id.
ASTERISK-27179 #close
Change-Id: Ifaec06dc7e65ad841633a24ebec8c8a9302d6643
* chan_sip: channel in test_sip_rtpqos_1.
* test_config: config hook, config info and global config holder.
* test_core_format: format in format_attribute_set_without_interface.
* test_stream: unneeded frame duplication.
* test_taskprocessor: task_data.
Change-Id: I94d364d195cf3b3b5de2bf3ad565343275c7ad31
* Remove unnecessary CMP_STOP.
* In handle_client_registration() use DEBUG_ATLEAST() to only do work
needed for the debug log message when the debug log message is needed.
* In sip_outbound_registration_state_destroy() check state->registration
for NULL.
Change-Id: I656d0fa11dda0b00048103efb1558e67a426fd80
Most uses of CMP_STOP are superfluous and are only respected when
OBJ_MULTIPLE is used to search the container.
Change-Id: I20571a202ec0aa1098bb2749eeba18de7ca110b8
Support building the Asterisk httpd with version 3.0 of gmime as
well as earlier versions of that library.
ASTERISK-27173
Change-Id: I7e13dd05a3083ccb0df2dabf83110223f6a9fa8f
When the "webrtc" option was added in res_pjsip it was not added to the alembic
scripts. This patch adds the option for alembic.
Also, changed the sorcery configuration type to an OPT_YESNO_T value instead of
an OPT_BOOL_T so if this field is ever written to a database it will write out
the correct value.
ASTERISK-27119 #close
Change-Id: I3e199f060aea25e193c439fc5cf96be4d3ed1c7b
Syntax: SIP_HEADERS([prefix])
If the argument is specified, only the headers matching the given prefix
are returned.
The function returns a comma-separated list of SIP header names from an
incoming INVITE message. Multiple headers with the same name are included
in the list only once. The returned list can be iterated over using the
functions POP() and SIP_HEADER().
For example, '${SIP_HEADERS(Co)}' might return the string
'Contact,Content-Length,Content-Type'.
Practical use is rather '${SIP_HEADERS(X-)}' to enumerate optional
extended headers sent by a peer.
ASTERISK-27163
Change-Id: I2076d3893d03a2f82429f393b5b46db6cf68a267
This change fixes PIDF content generation when the underlying device
state is considered in use. Previously it was incorrectly marked
as closed meaning they were offline/unavailable. The code now
correctly marks them as open.
Additionally:
* Generate an XML element for our activity instead of a using a text
node.
* Consider every extension state other than "unavailable" to be 'open'
status.
* Update the XML namespaces and structure to reflect those
documented in RFC 4480
* Use 'on-the-phone' (defined in RFC 4880) instead of 'busy' as the
"in use" activity. This change results in eyeBeam using the
appropriate icon for the watched user.
This was tested on eyeBeam 1.5.20.2 build 59030 on Windows.
ASTERISK-26659 #close
Reported by: Abraham Liebsch
patches:
ASTERISK-26659.diff submitted by snuffy (license 5024)
Change-Id: I6e5ad450f91106029fb30517b8c0ea0c2058c810
The "external_media_address" option on transports is now
resolved using dnsmgr. This allows it to be automatically
refreshed regularly if refreshes are enabled in dnsmgr.
If the system is using a dynamic IP address a dynamic DNS
hostname can be provided to keep the IP address up to
date.
Change-Id: Ia54771720dff0105bde55d5bbb81a3ba437e05b2
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
Setting this option will cause the Queue application to only announce
the caller's position if it has improved since the last time that we
announced it.
Change-Id: I173a124121422209485b043e2bf784f54242fce6
OpenSSL has 2 levels or error processing. It's possible for the
top layer to return SSL_ERROR_SYSCALL but the lower layer return
no error, in which case processing should continue. Only the top
layer was being examined though so connections were being torn
down when they didn't need to be. This patch adds the examination
of the lower level codes, and if they return no errors, allows
processing to continue.
ASTERISK-27001
Reported-by: Ian Gilmour
patches:
pjproject-2.6.patch submitted by Ian Gilmour (license 6889)
Updated-by: George Joseph and Sauw Ming (Teluu)
Merged to upstream pjproject on 7/27/2017 (commit 5631)
Change-Id: I23844ca0c68ef1ee550f14d46f6dae57d33b7bd2
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
