https://origsvn.digium.com/svn/asterisk/trunk
................
r163449 | russell | 2008-12-12 07:55:30 -0600 (Fri, 12 Dec 2008) | 34 lines
Merged revisions 163448 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163448 | russell | 2008-12-12 07:44:08 -0600 (Fri, 12 Dec 2008) | 26 lines
Resolve issues that could cause DTMF to be processed out of order.
These changes come from team/russell/issue_12658
1) Change autoservice to put digits on the head of the channel's frame readq
instead of the tail. If there were frames on the readq that autoservice
had not yet read, the previous code would have resulted in out of order
processing. This required a new API call to queue a frame to the head
of the queue instead of the tail.
2) Change up the processing of DTMF in ast_read(). Some of the problems
were the result of having two sources of pending DTMF frames. There
was the dtmfq and the more generic readq. Both were used for pending
DTMF in various scenarios. Simplifying things to only use the frame
readq avoids some of the problems.
3) Fix a bug where a DTMF END frame could get passed through when it
shouldn't have. If code set END_DTMF_ONLY in the middle of digit emulation,
and a digit arrived before emulation was complete, digits would get
processed out of order.
(closes issue #12658)
Reported by: dimas
Tested by: russell, file
Review: http://reviewboard.digium.com/r/85/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@163450 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r163171 | russell | 2008-12-11 14:07:47 -0600 (Thu, 11 Dec 2008) | 16 lines
Fix the "failed" extension for outgoing calls.
The conversion to use ast_check_hangup() everywhere instead of checking the softhangup
flag directly introduced this problem. The issue is that ast_check_hangup() checked
for tech_pvt to be NULL. Unfortunately, this will be NULL is some valid circumstances,
such as with a dummy channel.
The fix is simple. Don't check tech_pvt. It's pointless, because the code path that
sets this to NULL is when the channel hangup callback gets called. This happens inside
of ast_hangup(), which is the same function responsible for freeing the channel. Any
code calling ast_check_hangup() better not be calling it after that point, and if so,
we have a bigger problem at hand.
(closes issue #14035)
Reported by: erogoza
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@163172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r141949 | russell | 2008-09-08 20:47:56 -0500 (Mon, 08 Sep 2008) | 9 lines
Modify ast_answer() to not hold the channel lock while calling ast_safe_sleep()
or when calling ast_waitfor(). These are inappropriate times to hold the channel
lock. This is what has caused "could not get the channel lock" messages from
chan_sip and has likely caused a negative impact on performance results of SIP
in Asterisk 1.6. Thanks to file for pointing out this section of code.
(closes issue #13287)
(closes issue #13115)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@141950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r140692 | murf | 2008-09-02 16:55:12 -0600 (Tue, 02 Sep 2008) | 13 lines
Merged revisions 140690 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140690 | murf | 2008-09-02 16:40:13 -0600 (Tue, 02 Sep 2008) | 1 line
After reconsidering, with respect to 13409, ast_cdr_detach should be OK, better in fact, than ast_cdr_free, which generates lots of useless warnings that will undoubtably generate complaints.
Hmmm. It doesn't hush the useless warnings, but it does allow control of posting via the detach and post routines, for those possible situations,
where you'd want to post single-channel cdrs.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@140826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r136633 | mmichelson | 2008-08-07 14:54:27 -0500 (Thu, 07 Aug 2008) | 7 lines
Fix a calculation error I had made in the poll. The poll
would reset to 500 ms every time a non-voice frame
was received. The total time we poll should be 500 ms, so
now we save the amount of time left after the poll returned
and use that as our argument for the next call to poll
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@136634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r136631 | mmichelson | 2008-08-07 14:36:46 -0500 (Thu, 07 Aug 2008) | 13 lines
Scrap the 500 ms delay when Asterisk auto-answers a channel.
Instead, poll the channel until receiving a voice frame. The
cap on this poll is 500 ms.
The optional delay is still allowable in the Answer() application,
but the delay has been moved back to its original position, after
the call to the channel's answer callback. The poll for the voice
frame will not happen if a delay is specified when calling Answer().
(closes issue #12708)
Reported by: kactus
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@136632 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r135851 | mmichelson | 2008-08-05 19:30:53 -0500 (Tue, 05 Aug 2008) | 48 lines
Merged revisions 135841,135847,135850 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135841 | mmichelson | 2008-08-05 19:25:10 -0500 (Tue, 05 Aug 2008) | 27 lines
Merging the issue11259 branch.
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
........
r135847 | mmichelson | 2008-08-05 19:27:54 -0500 (Tue, 05 Aug 2008) | 4 lines
Revert inadvertent changes to app_skel that occurred when
I was testing for a memory leak
........
r135850 | mmichelson | 2008-08-05 19:29:54 -0500 (Tue, 05 Aug 2008) | 3 lines
Remove properties that should not be here
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@135852 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r135821 | murf | 2008-08-05 17:45:32 -0600 (Tue, 05 Aug 2008) | 42 lines
Merged revisions 135799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135799 | murf | 2008-08-05 17:13:20 -0600 (Tue, 05 Aug 2008) | 34 lines
(closes issue #12982)
Reported by: bcnit
Tested by: murf
I discovered that also, in the previous bug fixes and changes,
the cdr.conf 'unanswered' option is not being obeyed, so
I fixed this.
And, yes, there are two 'answer' times involved in this
scenario, and I would agree with you, that the first
answer time is the time that should appear in the CDR.
(the second 'answer' time is the time that the bridge
was begun).
I made the necessary adjustments, recording the first
answer time into the peer cdr, and then using that to
override the bridge cdr's value.
To get the 'unanswered' CDRs to appear, I purposely
output them, using the dial cmd to mark them as
DIALED (with a new flag), and outputting them if
they bear that flag, and you are in the right mode.
I also corrected one small mention of the Zap device
to equally consider the dahdi device.
I heavily tested 10-sec-wait macros in dial, and
without the macro call; I tested hangups while the
macro was running vs. letting the macro complete
and the bridge form. Looks OK. Removed all the
instrumentation and debug.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@135822 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r127793 | murf | 2008-07-03 11:16:44 -0600 (Thu, 03 Jul 2008) | 38 lines
Merged revisions 127663 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r127663 | murf | 2008-07-02 18:16:25 -0600 (Wed, 02 Jul 2008) | 30 lines
The CDRfix4/5/6 omnibus cdr fixes.
(closes issue #10927)
Reported by: murf
Tested by: murf, deeperror
(closes issue #12907)
Reported by: falves11
Tested by: murf, falves11
(closes issue #11849)
Reported by: greyvoip
As to 11849, I think these changes fix the core problems
brought up in that bug, but perhaps not the more global
problems created by the limitations of CDR's themselves
not being oriented around transfers.
Reopen if necc, but bug reports are not the best
medium for enhancement discussions. We need to start
a second-generation CDR standardization effort to cover
transfers.
(closes issue #11093)
Reported by: rossbeer
Tested by: greyvoip, murf
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@127830 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r127157 | mmichelson | 2008-07-01 16:16:00 -0500 (Tue, 01 Jul 2008) | 8 lines
Place the delay in __ast_answer prior to the channel-specific answer
callback. This change differs from commit 127113 in that now the
channel is not set to AST_STATE_UP until after the answer callback.
(closes issue #12924)
Reported by: snyfer
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@127158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r125138 | kpfleming | 2008-06-25 18:05:28 -0500 (Wed, 25 Jun 2008) | 18 lines
Merged revisions 125132 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@125146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r121282 | russell | 2008-06-09 11:37:08 -0500 (Mon, 09 Jun 2008) | 18 lines
Merged revisions 121280 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r121280 | russell | 2008-06-09 11:35:40 -0500 (Mon, 09 Jun 2008) | 10 lines
Do not attempt to do emulation if an END digit is received and the length is
less than the defined minimum digit length, and the other end only wants END
digits (SIP INFO, for example).
(closes issue #12778)
Reported by: tsearle
Patches:
12778.rev1.txt uploaded by russell (license 2)
Tested by: tsearle
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@121283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r116089 | mmichelson | 2008-05-13 18:54:01 -0500 (Tue, 13 May 2008) | 20 lines
Merged revisions 116088 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r116088 | mmichelson | 2008-05-13 18:47:49 -0500 (Tue, 13 May 2008) | 12 lines
A change to the way channel locks are handled when DEBUG_CHANNEL_LOCKS is defined.
After debugging a deadlock, it was noticed that when DEBUG_CHANNEL_LOCKS
is enabled in menuselect, the actual origin of channel locks is obscured
by the fact that all channel locks appear to happen in the function
ast_channel_lock(). This code change redefines ast_channel_lock to be a
macro which maps to __ast_channel_lock(), which then relays the proper
file name, line number, and function name information to the core lock
functions so that this information will be displayed in the case that
there is some sort of locking error or core show locks is issued.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@116096 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r114107 | mmichelson | 2008-04-14 10:01:36 -0500 (Mon, 14 Apr 2008) | 13 lines
Merged revisions 114106 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114106 | mmichelson | 2008-04-14 09:58:02 -0500 (Mon, 14 Apr 2008) | 5 lines
Save a local copy of the generate callback prior to unlocking the channel in
case the generate callback goes NULL on us after the channel is unlocked. Thanks
to Russell for pointing this need out to me.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@114108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r113066 | mmichelson | 2008-04-07 11:12:30 -0500 (Mon, 07 Apr 2008) | 21 lines
Merged revisions 113065 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r113065 | mmichelson | 2008-04-07 11:08:45 -0500 (Mon, 07 Apr 2008) | 13 lines
This fix prevents a deadlock that was experienced in chan_local. There was
deadlock prevention in place in chan_local, but it would not work in a specific
case because the channel was recursively locked. By unlocking the channel prior
to calling the generator's generate callback in ast_read_generator_actions(), we
prevent the recursive locking, and therefore the deadlock.
(closes issue #12307)
Reported by: callguy
Patches:
12307.patch uploaded by putnopvut (license 60)
Tested by: callguy
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@113067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r110268 | russell | 2008-03-20 12:41:22 -0500 (Thu, 20 Mar 2008) | 27 lines
Add some fixes that I made in regards to wideband codec handling to get
G.722 music on hold working for me.
(issue #12164, reported by milazzo and jsmith, patches by me)
res/res_musiconhold.c:
- I moved a single line so that the sample queue update happened before
ast_write(). The reason that this was a bug is that the G.722 frame
originally says it has 320 samples in it (which is correct). However,
when the frame is written to a channel that uses RTP, main/rtp.c modifies
the frame to cut the number of samples in half before it sends it on
the wire. This is to account for the stupid incorrect G.722 spec that
makes it so we have to lie about the number of samples with RTP. I should
probably go and re-work the RTP code so it doesn't modify the frame so
that a bug like this won't happen in the future. However, this change to
MOH is harmless.
main/channel.c:
- I made two fixes in regards to generator timing. Generators use samples
for timing. However, this code assumed 8 kHz samples. In one case, it was
a hard coded 160 samples, that is now written as the sample rate / 50. The
other place was dealing with timing a generator based on frames coming from
the other direction. However, that would have only worked if the sample
rates for the formats in both directions were the same. The code now takes
into account that the sample rates may differ, and scales the generator
samples accordingly.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@110269 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r108584 | russell | 2008-03-13 16:40:43 -0500 (Thu, 13 Mar 2008) | 19 lines
Merged revisions 108583 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108583 | russell | 2008-03-13 16:38:16 -0500 (Thu, 13 Mar 2008) | 11 lines
Fix another issue that was causing crashes in chanspy. This introduces a new
datastore callback, called chan_fixup(). The concept is exactly like the
fixup callback that is used in the channel technology interface. This callback
gets called when the owning channel changes due to a masquerade. Before this
was introduced, if a masquerade happened on a channel being spyed on, the
channel pointer in the datastore became invalid.
(closes issue #12187)
(reported by, and lots of testing from atis)
(props to file for the help with ideas)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@108585 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r108137 | russell | 2008-03-12 14:59:05 -0500 (Wed, 12 Mar 2008) | 48 lines
Merged revisions 108135 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r108135 | russell | 2008-03-12 14:57:42 -0500 (Wed, 12 Mar 2008) | 40 lines
(closes issue #12187, reported by atis, fixed by me after some brainstorming
on the issue with mmichelson)
- Update copyright info on app_chanspy.
- Fix a race condition that caused app_chanspy to crash. The issue was that
the chanspy datastore magic that was used to ensure that spyee channels did
not disappear out from under the code did not completely solve the problem.
It was actually possible for chanspy to acquire a channel reference out of
its datastore to a channel that was in the middle of being destroyed. That
was because datastore destruction in ast_channel_free() was done near the
end. So, this left the code in app_chanspy accessing a channel that was
partially, or completely invalid because it was in the process of being free'd
by another thread. The following sort of shows the code path where the race
occurred:
=============================================================================
Thread 1 (PBX thread for spyee chan) || Thread 2 (chanspy)
--------------------------------------||-------------------------------------
ast_channel_free() ||
- remove channel from channel list ||
- lock/unlock the channel to ensure ||
that no references retrieved from ||
the channel list exist. ||
--------------------------------------||-------------------------------------
|| channel_spy()
- destroy some channel data || - Lock chanspy datastore
|| - Retrieve reference to channel
|| - lock channel
|| - Unlock chanspy datastore
--------------------------------------||-------------------------------------
- destroy channel datastores ||
- call chanspy datastore d'tor ||
which NULL's out the ds' || - Operate on the channel ...
reference to the channel ||
||
- free the channel ||
||
|| - unlock the channel
--------------------------------------||-------------------------------------
=============================================================================
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@108138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
LIST instead of an RWLIST. The way this list works makes it such that
a RWLIST provides no additional benefit. Also, a mutex is needed for
use with the thread condition.
Merged revisions 105563 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105563 | russell | 2008-03-03 09:50:43 -0600 (Mon, 03 Mar 2008) | 24 lines
Merge in some changes from team/russell/autoservice-nochans-1.4
These changes fix up some dubious code that I came across while auditing what
happens in the autoservice thread when there are no channels currently in
autoservice.
1) Change it so that autoservice thread doesn't keep looping around calling
ast_waitfor_n() on 0 channels twice a second. Instead, use a thread condition
so that the thread properly goes to sleep and does not wake up until a
channel is put into autoservice.
This actually fixes an interesting bug, as well. If the autoservice thread
is already running (almost always is the case), then when the thread goes
from having 0 channels to have 1 channel to autoservice, that channel would
have to wait for up to 1/2 of a second to have the first frame read from it.
2) Fix up the code in ast_waitfor_nandfds() for when it gets called with no
channels and no fds to poll() on, such as was the case with the previous code
for the autoservice thread. In this case, the code would call alloca(0), and
pass the result as the first argument to poll(). In this case, the 2nd
argument to poll() specified that there were no fds, so this invalid pointer
shouldn't actually get dereferenced, but, this code makes it explicit and
ensures the pointers are NULL unless we have valid data to put there.
(related to issue #12116)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105560 | file | 2008-03-03 11:28:59 -0400 (Mon, 03 Mar 2008) | 7 lines
It is possible for no audio to pass between the current digit and next digit so expand logic that clears emulation to AST_FRAME_NULL.
(closes issue #11911)
Reported by: edgreenberg
Patches:
v1-11911.patch uploaded by dimas (license 88)
Tested by: tbsky
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
