When potentially sending manager events, return immediately if there are no
sessions or hooks. Also, avoid locking the hooks list if it is empty.
(issue #16455)
Reported by: atis
Patches:
manager_hooks_trunk.patch uploaded by atis (license 242)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_frdup the frame data union does not get set to point to malloced memory
if the datalen is zero, so make sure to handle the same case in ast_frisolate
appropriately.
(closes issue #16058)
Reported by: atis
Patches:
bug16058-fix.patch uploaded by jpeeler (license 325)
Tested by: atis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243244 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to improve readability, the output from 'test show
registered' has been modified to truncate fields to fit within
the format output if they are over a certain length.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243242 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch removes code that was duplicated from pbx.c to manager.c
in order to prevent API change in released versions of Asterisk.
There are propably also other places that would benefit from reading the
return code and react if a function returns error codes on writing a value into it.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@242919 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When this code was developed, we came up with our own XML format for the test
output. I have since started looking at integration with other tools, namely
continuous integration frameworks, and this format seems to be supported
across a number of applications. With these changes in place, I was able
to get Atlassian Bamboo to interpret the test results.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows CDR variables added in cdr.c:set_one_cid to become visable during the call,
by executing ast_cdr_update() early in __ast_pbx run.
Reverts sig_pri changes in trunk that are specific to isdn technology only.
(closes issue #16638)
Reported by: alecdavis
Patches:
cdr_update.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241416 65c4cc65-6c06-0410-ace0-fbb531ad65f3
passdata was only being set in pbx_substitue_variables when arguments were
passed.
(closes issue #16406)
(closes issue #16586)
Reported by: DLNoah
Patches:
bug16586v2.patch uploaded by jpeeler (license 325)
Tested by: DLNoah
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241366 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the limit was set past MAX_INT upon answering, the call was immediately
hung up due to overflow from the return of ast_tvdiff_ms (in ast_check_hangup).
The time calculation functions ast_tvdiff_sec and ast_tvdiff_ms have been
changed to return an int64_t to prevent overflow. Also the reporter suggested
adding a message indicating the reason for the call hanging up. Given that the
new limit is so much higher, the message (which would only really be useful in
the overflow scenario) has been made a debug message only.
(closes issue #16006)
Reported by: viraptor
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241143 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r241015 | seanbright | 2010-01-18 14:54:19 -0500 (Mon, 18 Jan 2010) | 12 lines
Plug a memory leak when reading configs with their comments.
While reading through configuration files with the intent of returning their
full contents (comments specifically) we allocated some memory and then forgot
to free it. This doesn't fix 16554 but clears up a leak I had in the lab.
(issue #16554)
Reported by: mav3rick
Patches:
issue16554_20100118.patch uploaded by seanbright (license 71)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@241016 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We're revisiting the previous patch, albeit with a method that overcomes the
prior criticism that it was not POSIX-compliant.
(closes issue #16602)
Reported by: frawd
Patches:
20100114__issue16602.diff.txt uploaded by tilghman (license 14)
Tested by: frawd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk would crash on startup if MALLOC_DEBUG were set in menuselect. This is because
the manager action UpdateConfig had to resize its string field allocation to set the
description. When the resize occurred, ast_copy_string would crash because we were
attempting to copy a string from a NULL pointer. Setting the strings initially makes
the code much less crashy.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The problem was the OUTGOING flag was not getting set properly on the channel,
resulting in pickup failing as ast_read thought the call was inbound. Refer to
170393 for a more verbose description as this is the same exact change.
(closes issue #16539)
Reported by: syspert
Patches:
bug16539.patch uploaded by jpeeler (license 325)
Tested by: syspert
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@240179 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Specifically, by setting TESTTIME() to a particular date and time, you
can test whether a dialplan correctly branches as was intended. This was
developed after recent questions on the -users list on how to test their
holiday dialplan logic.
(closes issue #16464)
Reported by: tilghman
Patches:
20100112__issue16464.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/458/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r239838 | jpeeler | 2010-01-13 13:43:33 -0600 (Wed, 13 Jan 2010) | 11 lines
Fix regression for timed out parked call returning to caller
This issue seems to have been exposed by the fix in 160390 whereby using a
masquerade prevented a crash. The new channel used in the masquerade was
not copying the macro information from the old channel.
(closes issue #15459)
Reported by: djrodman
Patches:
patch_15459.txt uploaded by mnick (license )
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239839 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also, made a Makefile change to ensure that the expression parser C source files get
regenerated correctly, when we need that to happen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239797 65c4cc65-6c06-0410-ace0-fbb531ad65f3
asterisk.conf's 'transmit_silence' option existed before
this patch, but was limited to only generating silence
while recording and sending DTMF. Now enabling the
transmit_silence option generates silence during wait
times as well.
To achieve this, ast_safe_sleep has been modified to
generate silence anytime no other generators are present
and transmit_silence is enabled. Wait apps not using
ast_safe_sleep now generate silence when transmit_silence
is enabled as well.
(closes issue #16524)
Reported by: kobaz
(closes issue #16523)
Reported by: kobaz
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/456/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The second is the default state for matching CID in the dialplan (no matching)
while the first matches one particular CallerID. This is a regression.
(fixes AST-314, SWP-611)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There is an issue which only affects trunk and the new ao2_callback OBJ_MULTIPLE
implementation. When both OBJ_MULTIPLE and OBJ_NODATA are passed, only the first
object is visited, regardless of what is returned by the specified callback. This
causes a problem when we are clearing a container, i.e.:
ao2_callback(container, OBJ_UNLINK | OBJ_NODATA | OBJ_MULTIPLE, NULL, NULL);
Only unlinks the first object. This patch resolves this.
(closes issue #16564)
Reported by: pj
Patches:
issue16564_20100111.diff uploaded by seanbright (license 71)
Tested by: pj, seanbright
Review: https://reviewboard.asterisk.org/r/457/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239113 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes a crash on Solaris.
(closes issue #16572)
Reported by: crjw
Patches:
frame_changes.patch uploaded by crjw (license 963)
Plus several others found and fixed by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239074 65c4cc65-6c06-0410-ace0-fbb531ad65f3
