https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297824 | jpeeler | 2010-12-07 16:58:54 -0600 (Tue, 07 Dec 2010) | 19 lines
Merged revisions 297823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297823 | jpeeler | 2010-12-07 16:57:48 -0600 (Tue, 07 Dec 2010) | 12 lines
Revert code that changed SSRC for DTMF.
Some previous behavior was attempted to be restored, but mistakingly I did
not realize that the previous behavior was incorrect. This fixes DTMF not
being detected since DTMF shouldn't cause the SSRC to change.
(related to issue #17404)
(closes issue #18189)
(closes issue #18352)
Reported by: marcbou
Tested by: cmbaker82
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@297825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297311 | twilson | 2010-12-02 12:07:39 -0600 (Thu, 02 Dec 2010) | 21 lines
Merged revisions 297310 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297310 | twilson | 2010-12-02 12:00:27 -0600 (Thu, 02 Dec 2010) | 12 lines
Initialize offset for adaptive jitter buffer
When the adaptive jitter buffer is enabled in sip.conf, the first frame placed
in the jitter buffer fails with something like:
jb_warning_output: Resyncing the jb. last_delay 0, this delay -215886466,
threshold 1000, new offset 215886466
This happens because the offset is not initialized before calling jb_put(). This
patch modifies jb_put_first_adaptive() to set the offset to the frame's
timestamp.
Review: https://reviewboard.asterisk.org/r/1041/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@297312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r296533 | tilghman | 2010-11-29 01:27:09 -0600 (Mon, 29 Nov 2010) | 13 lines
I love standards. There are so many to choose from. Except when there isn't one.
Linux and *BSD disagree on the elements within the ucred structure. Detect
which one is in use on the system.
(closes issue #18384)
Reported by: bjm
Patches:
cred-diffs uploaded by bjm (license 473)
20101127__issue18384__1.6.2.diff.txt uploaded by tilghman (license 14)
20101127__issue18384__1.8.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman, bjm
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@296534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296221 | russell | 2010-11-24 17:28:19 -0600 (Wed, 24 Nov 2010) | 13 lines
Merged revisions 296213 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296213 | russell | 2010-11-24 17:26:43 -0600 (Wed, 24 Nov 2010) | 6 lines
Make Asterisk less crashy.
Since we might not put a new translation path on the channel, go ahead and
set it to NULL right after destroying the old one to ensure we don't try
to free an invalid translation path later on.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@296230 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296083 | russell | 2010-11-24 14:23:11 -0600 (Wed, 24 Nov 2010) | 19 lines
Merged revisions 296082 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296082 | russell | 2010-11-24 14:22:32 -0600 (Wed, 24 Nov 2010) | 12 lines
Fix false reporting of an error by set_format().
In the case that the native format was able to be changed to match the
new requested format, the code proceeded to attempt to build a translation
path, anyway. The result would be NULL, since no translation path is
necessary and resulted in this function thinking an error has occurred.
This case is now specifically caught and no attempt to build a translation
path is attempted.
Thanks to our automated tests and bamboo.asterisk.org for catching this problem
and making a whole lot of noise when things started failing. :-)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@296084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296001 | russell | 2010-11-24 11:03:16 -0600 (Wed, 24 Nov 2010) | 45 lines
Merged revisions 296000 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296000 | russell | 2010-11-24 10:48:39 -0600 (Wed, 24 Nov 2010) | 38 lines
Handle failures building translation paths more effectively.
The problem scenario occurred on a heavily loaded system that was using the
codec_dahdi module and exceeded the hardware transcoding capacity. The failure
mode at that point was not good. The report came in to us as an Asterisk
lock-up. The "core show locks" shows a ton of threads locked up (but no
obvious deadlock). Upon deeper investigation, when the system is in this
state, the CPU was maxed out. The CPU was being consumed by the Asterisk
logger spewing messages on every audio frame for calls set up after transcoder
capacity was reached.
The purpose of this patch is to make Asterisk handle failures to create a
translation path in a more graceful manner. If we can't translate, then the
call just needs to be dropped, as it's not going to work. These are the
changes:
1) In set_format() of channel.c (which is called by set_read_format() and
set_write_format()), it was ignoring if ast_translator_build_path() failed and
returned NULL. It now pays attention to that case and returns a result
reflecting failure. With this change in place, the bridging code will
immediately detect a failure and end the bridge instead of proceeding to try to
bridge frames that can't be translated and making channel drivers freak out by
sending them frames in a format they weren't expecting.
2) In ast_indicate_data() of channel.c, failure of ast_playtones_start() was
ignored. It is now reflected in the return value of the function. This didn't
turn out to have any affect on the bug, but seemed like a good change to leave
in.
3) In app_dial(), when only sending a call to a single endpoint, it will
attempt to do some bridging of its own of early audio. It uses
make_compatible() when it's going to do this. However, it ignored failure from
make compatible. So, even with the fix from #1, if there was early audio going
through app_dial, there would still be a period of invalid frames passing
through. After detecting failure here, Dial() exits.
ABE-2658
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@296002 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r295843 | rmudgett | 2010-11-22 13:28:23 -0600 (Mon, 22 Nov 2010) | 53 lines
Merged revisions 295790 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r295790 | rmudgett | 2010-11-22 12:46:26 -0600 (Mon, 22 Nov 2010) | 46 lines
The channel redirect function (CLI or AMI) hangs up the call instead of redirecting the call.
To recreate the problem:
1) Party A calls Party B
2) Invoke CLI "channel redirect" command to redirect channel call leg
associated with A.
3) All associated channels are hung up.
Note that if the CLI command were done on the channel call leg associated
with B it works.
This regression was a result of the fix for issue #16946
(https://reviewboard.asterisk.org/r/740/).
The regression affects all features that use an async goto to execute the
dialplan because of an external event: Channel redirect, AMI redirect, SIP
REFER, and FAX detection.
The struct ast_channel._softhangup code is a mess. The variable is used
for several purposes that do not necessarily result in the call being hung
up. I have added doxygen comments to describe how the various _softhangup
bits are used. I have corrected all the places where the variable was
tested in a non-bit oriented manner.
The primary fix is the new AST_CONTROL_END_OF_Q frame. It acts as a weak
hangup request so the soft hangup requests that do not normally result in
a hangup do not hangup.
JIRA SWP-2470
JIRA SWP-2489
(closes issue #18171)
Reported by: SantaFox
(closes issue #18185)
Reported by: kwemheuer
(closes issue #18211)
Reported by: zahir_koradia
(closes issue #18230)
Reported by: vmarrone
(closes issue #18299)
Reported by: mbrevda
(closes issue #18322)
Reported by: nerbos
Review: https://reviewboard.asterisk.org/r/1013/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@295866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r295710 | russell | 2010-11-19 18:45:51 -0600 (Fri, 19 Nov 2010) | 29 lines
Fix cache of device state changes for multiple servers.
This patch addresses a regression where device states across multiple servers
were not being processing completely correctly. The code works to determine
the overall state by looking at the last known state of a device on each
server. However, there was a regression due to some invasive rewrites of how
the cache works that led to the cache only storing the last device state change
for a device, regardless of which server it was on.
The code is set up to cache device state change events by ensuring that each
event in the cache has a unique device name + entity ID (server ID). The code
that was responsible for comparing raw information elements (which EID is)
always returned a match due to a memcmp() with a length of 0.
There isn't much code to fix the actual bug. This patch also introduces a new
CLI command that was very useful for debugging this problem. The command
allows you to dump the contents of the event cache.
(closes issue #18284)
Reported by: klaus3000
Patches:
issue18284.rev1.txt uploaded by russell (license 2)
Tested by: russell, klaus3000
(closes issue #18280)
Reported by: klaus3000
Review: https://reviewboard.asterisk.org/r/1012/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@295711 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294639 | jpeeler | 2010-11-11 13:31:00 -0600 (Thu, 11 Nov 2010) | 53 lines
Merged revisions 294384 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294384 | jpeeler | 2010-11-09 11:37:59 -0600 (Tue, 09 Nov 2010) | 47 lines
Fix a deadlock in device state change processing.
Copied from some notes from the original author (Russell):
Deadlock scenario:
Thread 1: device state change thread
Holds - rdlock on contexts
Holds - hints lock
Waiting on channels container lock
Thread 2: SIP monitor thread
Holds the "iflock"
Holds a sip_pvt lock
Holds channel container lock
Waiting for a channel lock
Thread 3: A channel thread (chan_local in this case)
Holds 2 channel locks acquired within app_dial
Holds a 3rd channel lock it got inside of chan_local
Holds a local_pvt lock
Waiting on a rdlock of the contexts lock
A bunch of other threads waiting on a wrlock of the contexts lock
To address this deadlock, some locking order rules must be put in place and
enforced. Existing relevant rules:
1) channel lock before a pvt lock
2) contexts lock before hints lock
3) channels container before a channel
What's missing is some enforcement of the order when you involve more than any
two. To fix this problem, I put in some code that ensures that (at least in the
code paths involved in this bug) the locks in (3) come before the locks in (2).
To change the operation of thread 1 to comply, I converted the storage of hints
to an astobj2 container. This allows processing of hints without holding the
hints container lock. So, in the code path that led to thread 1's state, it no
longer holds either the contexts or hints lock while it attempts to lock the
channels container.
(closes issue #18165)
Reported by: antonio
ABE-2583
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@294640 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@294349 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r294277 | jpeeler | 2010-11-08 15:58:13 -0600 (Mon, 08 Nov 2010) | 16 lines
Fix playback failure when using IAX with the timerfd module.
To fix this issue the alert pipe will now be used when the timerfd module is
in use. There appeared to be a race that was not solved by adding locking in the
timerfd module, but needed to be there anyway. The race was between the timer
being put in non-continuous mode in ast_read on the channel thread and the IAX
frame scheduler queuing a frame which would enable continuous mode before the
non-continuous mode event was read. This race for now is simply avoided.
(closes issue #18110)
Reported by: tpanton
Tested by: tpanton
I put tested by tpanton because it was tested on his hardware. Thanks for the
remote access to debug this issue!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@294278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@293803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a call is transfered by ECT or implicitly by disconnect in sig_pri or
implicitly by disconnect in chan_misdn, the connected line information is
not exchanged. The connected line interception macros also need to be
executed if defined.
The CALLER interception macro is executed for the held call.
The CALLEE interception macro is executed for the active/ringing call.
JIRA ABE-2589
JIRA SWP-2296
Patches:
abe_2589_c3bier.patch uploaded by rmudgett (license 664)
abe_2589_v1.8_v2.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/958/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@292704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible for a AMI session to freeze because of invalid
use of recursive locks during the EVENT processing. This
patch removes the unnecessary locks.
(closes issue #18167)
Reported by: sustav
Patches:
manager_locking_v1.diff uploaded by dvossel (license 671)
Tested by: sustav
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@292595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These errors came up once this function was used from within netsock2.c.
The errors were like the following:
netsock2.c:393: error: dereferencing pointer ‘({anonymous})’ does break strict-aliasing rules
The usage of a union here avoids this problem.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@292188 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@291758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r291580 | twilson | 2010-10-13 15:58:43 -0700 (Wed, 13 Oct 2010) | 28 lines
Merged revisions 291577 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r291577 | twilson | 2010-10-13 15:45:15 -0700 (Wed, 13 Oct 2010) | 21 lines
Don't ignore frames that have been queued when softhangup'd
When an outgoing call is answered and hung up by the far end *very* quickly, we
may not read any frames and therefor end up with a call that displays the wrong
disposition/DIALSTATUS. The reason is because ast_queue_hangup() immediately
sets the _softhangup flag on the channel and then queues the HANGUP control
frame, but __ast_read refuses to read any frames if ast_check_hangup() indicates
that a hangup request has been made (which it will if _softhangup is set). So,
we end up losing control frames.
This change makes __ast_read continue to read frames even if a soft hangup has
been requested. It queues a hangup frame to make sure that __ast_read() will
still eventually return NULL.
Much thanks to David Vossel for all of the reviews, discussion, and help!
(closes issue #16946)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/740/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@291581 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This issue was caused by improper use of the mansession lock and
manession_session lock. These two structures are confusing to begin
with so I'm not surprised this occurred. I fixed this by consistently
making sure we use each of these locks only to protect the data
in the corresponding structure. We had mismatched usage of these
locks which resulted in no mutual exclusivity occurring at all.
(closes issue #17994)
Reported by: vrban
Patches:
mansession_locking_fix.diff uploaded by dvossel (license 671)
Tested by: vrban
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@291227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r291073 | rmudgett | 2010-10-11 11:39:17 -0500 (Mon, 11 Oct 2010) | 15 lines
Fixed infinite loop in verbose/debug message output.
Setting the module/filename specific message level and then changing it
resulted in the linked list being looped on itself. Traversing this
linked list is an infinite loop if what you are looking for is not in the
list.
Also plugged some CLI parsing holes in the associated CLI command:
* Removing a nonexistent module from the list actually added it with a
level of zero.
* Setting the non-module specific level to zero is now equivalent to
setting it to "off" as documented.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@291075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r290863 | jpeeler | 2010-10-07 21:45:44 -0500 (Thu, 07 Oct 2010) | 16 lines
Merged revisions 290862 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r290862 | jpeeler | 2010-10-07 21:35:29 -0500 (Thu, 07 Oct 2010) | 9 lines
Ensure editline cleanup occurs when Ctrl-C is pressed at control console.
A recent change was made to avoid a race condition on shutdown which only called
the end functions from the console thread. However, when pressing Ctrl-C the
quit handler is called from the signal handler thread.
(closes issue #17698)
Reported by: jmls
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@290864 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r290254 | tilghman | 2010-10-04 18:14:59 -0500 (Mon, 04 Oct 2010) | 11 lines
Change new pattern matcher to regard dashes the same as the old pattern matcher -- as visual candy to be ignored.
Also change the AEL parser to not generate dashes within extensions, as those
dashes would be ignored. Update the AEL tests to match this behavior.
(closes issue #17366)
Reported by: murf
Patches:
20100727__issue17366.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@290255 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289798 | jpeeler | 2010-10-01 18:01:31 -0500 (Fri, 01 Oct 2010) | 22 lines
Merged revisions 289797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289797 | jpeeler | 2010-10-01 17:58:38 -0500 (Fri, 01 Oct 2010) | 15 lines
Change RFC2833 DTMF event duration on end to report actual elapsed time.
The scenario here is with a non P2P early media session. The reported time
length of DTMF presses are coming up short when sending to the remote side.
Currently the event duration is a running total that is incremented when sending
continuation packets. These continuation packets are only triggered upon
incoming media from the remote side, which means that the running total probably
is not going to end up matching the actual length of time Asterisk received
DTMF. This patch changes the end event duration to be lengthened if it is
detected that the end event is going to come up short.
Review: https://reviewboard.asterisk.org/r/957/
ABE-2476
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@289840 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289339 | qwell | 2010-09-29 16:03:47 -0500 (Wed, 29 Sep 2010) | 15 lines
Merged revisions 289338 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289338 | qwell | 2010-09-29 15:56:26 -0500 (Wed, 29 Sep 2010) | 8 lines
Allow a manager originate to succeed on forwarded devices.
The timeout to wait for an answer was being set to 0 when a device forwarded to another
extension. We don't always need the timeout set like this, so make it an optional
parameter, and don't use it in this case.
ABE-2544
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@289340 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r289095 | bbryant | 2010-09-28 14:14:19 -0400 (Tue, 28 Sep 2010) | 21 lines
Merged revisions 289094 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r289094 | bbryant | 2010-09-28 14:10:19 -0400 (Tue, 28 Sep 2010) | 14 lines
Fixes an issue with the Newchannel AMI event during the Masquerading process.
Fixes an issue with the Newchannel AMI event during the Masquerading process,
where no Newchannel AMI event was generated for the psuedo channel used during
the masquerading process.
(closes issue #17987)
Reported by: RadicAlish
Patches:
newchannel.patch.txt uploaded by RadicAlish (license 1122)
Tested by: RadicAlish
Review: https://reviewboard.asterisk.org/r/937/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@289099 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r288340 | russell | 2010-09-22 11:44:13 -0500 (Wed, 22 Sep 2010) | 18 lines
Merged revisions 288339 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r288339 | russell | 2010-09-22 11:39:16 -0500 (Wed, 22 Sep 2010) | 11 lines
Fix a 100% CPU consumption problem when setting console=yes in asterisk.conf.
The handling of -c and console=yes should be the same, but they were not.
When you specify -c, it sets both a flag for console module and for asterisk
not to fork() off into the background. The handling of console=yes only set
console mode, so you would end up with a background process() trying to run
the Asterisk console and freaking out since it didn't have anything to read
input from.
Thanks to beagles for reporting and helping debug the problem!
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@288341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
