........
r225912 | jpeeler | 2009-10-26 14:40:26 -0500 (Mon, 26 Oct 2009) | 12 lines
ACL check not present for verifying SIP INVITEs
The ACL check in check_peer_ok was missing and has now been restored. The
missing check allowed for calls to be made on prohibited networks where an ACL
was defined in sip.conf and the allowguest option was set to off. See the AST
security advisory below for more information.
Merge code associated with AST-2009-007.
(closes issue #16091)
Reported by: thom4fun
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@225916 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This backport resolves some issues handling audio frames during FAX processing,
and ensures that the FAX application doesn't accidentally get notified of a T.38
switchover at the end of a successful FAX.
(issue #16127)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@225869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r225582 | kpfleming | 2009-10-23 09:02:42 -0500 (Fri, 23 Oct 2009) | 17 lines
Merged revisions 225581 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225581 | kpfleming | 2009-10-23 09:00:01 -0500 (Fri, 23 Oct 2009) | 10 lines
Don't force menuselect.makeopts to be rebuilt on every build.
For some reason the menuselect.makeopts file was listed as PHONY in the Makefile,
resulting in 'make' needing to rebuild it for every build. This then resulted in
the embedded module rules being rebuilt on every build, which can be slow and is
unnecessary.
This patch fixes the problem by properly allowing 'make' to know when the
menuselect.makeopts file needs to be rebuilt (defining the proper dependencies).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@225583 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r225307 | dvossel | 2009-10-21 16:58:46 -0500 (Wed, 21 Oct 2009) | 20 lines
Merged revisions 225243 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225243 | dvossel | 2009-10-21 15:58:08 -0500 (Wed, 21 Oct 2009) | 13 lines
IAX2: VNAK loop caused by signaling frames with no destination call number
It is possible for the PBX thread to queue up signaling frames before
a destination call number is received. This can result in signaling
frames being sent out with no destination call number. Since recent
versions of Asterisk require accurate destination callnumbers for all
Full Frames, this can cause a VNAK loop to occur. To resolve this
no signaling frames are sent until a destination callnumber is received,
and destination call numbers are now only required for iax_pvt matching
when the frame is an ACK.
Review: https://reviewboard.asterisk.org/r/413/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@225311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r225033 | dvossel | 2009-10-21 09:39:10 -0500 (Wed, 21 Oct 2009) | 27 lines
Merged revisions 225032 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r225032 | dvossel | 2009-10-21 09:37:04 -0500 (Wed, 21 Oct 2009) | 20 lines
IAX/SIP shrinkcallerid option
The shrinking of caller id removes '(', ' ', ')', non-trailing '.',
and '-' from the string. This means values such as 555.5555 and
test-test result in 555555 and testtest. There are instances,
such as Skype integration, where a specific value is passed via
caller id that must be preserved unmodified. This patch makes
the shrinking of caller id optional in chan_sip and chan_iax in
order to support such cases. By default this option is on to
preserve previous expected behavior.
(closes issue #15940)
Reported by: dimas
Patches:
v2-15940.patch uploaded by dimas (license 88)
15940_shrinkcallerid_trunk.c uploaded by dvossel (license 671)
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/408/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@225310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r224856 | tilghman | 2009-10-20 17:09:07 -0500 (Tue, 20 Oct 2009) | 12 lines
Merged revisions 224855 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224855 | tilghman | 2009-10-20 17:07:11 -0500 (Tue, 20 Oct 2009) | 5 lines
Pay attention to the return value of the manipulate function.
While this looks like an optimization, it prevents a crash from occurring
when used with certain audiohook callbacks (diagnosed with SVN trunk,
backported to 1.4 to keep the source consistent across versions).
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@224857 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r224671 | kpfleming | 2009-10-19 18:47:39 -0500 (Mon, 19 Oct 2009) | 14 lines
Merged revisions 224670 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224670 | kpfleming | 2009-10-19 18:44:07 -0500 (Mon, 19 Oct 2009) | 7 lines
Correct timestamp calculations when RTP sample rates over 8kHz are used.
While testing some endpoints that support 16kHz and 32kHz sample rates, some
log messages were generated due to calc_rxstamp() computing timestamps in a way
that produced odd results, so this patch sanitizes the result of the
computations.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@224672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r224331 | jpeeler | 2009-10-16 20:36:08 -0500 (Fri, 16 Oct 2009) | 20 lines
Merged revisions 224330 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224330 | jpeeler | 2009-10-16 20:32:47 -0500 (Fri, 16 Oct 2009) | 13 lines
Fix stale caller id data from being reported in AMI NewChannel event
The problem here is that chan_dahdi is designed in such a way to set
certain values in the dahdi_pvt only once. One of those such values
is the configured caller id data in chan_dahdi.conf. For PRI, the
configured caller id data could be overwritten during a call. Instead
of saving the data and restoring, it was decided that for all non-analog
channels it was simply best to not set the configured caller id in the
first place and also clear it at the end of the call.
(closes issue #15883)
Reported by: jsmith
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@224332 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r224261 | rmudgett | 2009-10-16 15:40:57 -0500 (Fri, 16 Oct 2009) | 25 lines
Merged revisions 224260 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224260 | rmudgett | 2009-10-16 15:25:23 -0500 (Fri, 16 Oct 2009) | 18 lines
Never released PRI channels when using Busy() or Congestion() dialplan apps.
When the Busy() or Congestion() application is used towards ISDN (an ISDN
progress is sent), the responding ISDN Disconnect or Release may contain
the ISDN cause user busy or one of the congestion causes. In chan_dahdi.c
these causes will only set the needbusy or needcongestion flags and not
activate the softhangup procedure. Unfortunately only the latter can
interrupt the endless wait loop of Busy()/Congestion().
Result: PRI channels staying in state busy for the rest of asterisk life
or until the other end times out and forces the call to clear.
(in issue 0014292)
Reported by: tomaso
Patches:
disc_rel_userbusy.patch uploaded by tomaso (license 564)
(This patch is unrelated to the issue.)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@224262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r223832 | jpeeler | 2009-10-12 18:48:09 -0500 (Mon, 12 Oct 2009) | 15 lines
Merged revisions 223804 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223804 | jpeeler | 2009-10-12 18:12:50 -0500 (Mon, 12 Oct 2009) | 8 lines
Ensure ringing continues for branched calls after progress is received
While waiting for an answer, don't send progress for branched calls
for which ringing was sent.
(closes issue #15028)
Reported by: fnordian
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223833 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r223652 | kpfleming | 2009-10-12 09:25:29 -0500 (Mon, 12 Oct 2009) | 13 lines
Remove automatic switching from T.38 to voice mode in chan_sip.
chan_sip has some code to automatically switch from T.38 mode to voice mode when
a voice frame is written to the channel while it is in T.38 mode; this was
intended to handle the situation when a FAX transmission has ended and the channel
is not yet hung up, but is causing problems at the beginning of FAX sessions as
well when there are still voice frames 'in flight' at the time the T.38 negotiation
completes. This patch removes the automatic switchover, and changes app_fax to
explicitly switch off T.38 mode when the FAX transmission process ends.
(closes issue #16025)
Reported by: jamicque
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r223487 | russell | 2009-10-11 12:25:42 -0500 (Sun, 11 Oct 2009) | 17 lines
Merged revisions 223485-223486 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r223485 | russell | 2009-10-11 12:22:52 -0500 (Sun, 11 Oct 2009) | 6 lines
Don't use data outside of its scope.
The purpose of this code was to have a hangup frame put on the list of deferred
frames. However, the code that read the hangup frame was outside of the scope
of where the hangup frame was declared.
........
r223486 | russell | 2009-10-11 12:25:06 -0500 (Sun, 11 Oct 2009) | 2 lines
Remove some unnecessary code.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit is the simplest way to solve a problem that has already been solved
in trunk with the "COLP/CONP and Redirecting party information into Asterisk"
commit. In trunk the redirection reason is translated into a generic redirect
reason. I would have had to do the same fix except chan_sip never reads
PRIREDIRECTREASON. So both chan_dahdi and chan_h323 have been modified to
interpret the one different redirect reason of "no-answer" properly and set the
ISDN reason code 2 of "no reply".
(closes issue #15033)
Reported by: steinwej
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r223330 | kpfleming | 2009-10-09 15:58:44 -0500 (Fri, 09 Oct 2009) | 10 lines
Initiate T.38 switchover when acting as called party, regardless of FAX direction.
SendFAX() and ReceiveFAX() can be given options to indicate whether they should
act as the calling or called party; this mode should be used to decide whether
to initiate a switchover to T.38, not the direction that the FAX transfer will
take place.
(closes issue #16039)
Reported by: jamicque
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223331 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r223136 | mnicholson | 2009-10-09 12:14:38 -0500 (Fri, 09 Oct 2009) | 8 lines
Don't close the sqlite database when reloading. Only close the database when unloading.
(closes issue #15953)
Reported by: frawd
Patches:
sqlite3_rev220097.diff uploaded by frawd (license 610)
Tested by: frawd
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223172 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r223088 | dvossel | 2009-10-09 10:49:30 -0500 (Fri, 09 Oct 2009) | 14 lines
p->peerauth is always empty in transmit_register()
When using callbackextension or specifing the peer name
in a registration string, the peer's specific auth settings
set by the "auth=" strings within the peer definition are not
used by the registration. Thanks to ebroad for reporting the
issue and providing the patch.
(closes issue #15955)
Reported by: ebroad
Patches:
regauthfix.patch uploaded by ebroad (license 878)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@223091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r222880 | russell | 2009-10-08 14:52:03 -0500 (Thu, 08 Oct 2009) | 51 lines
Merged revisions 222878 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222878 | russell | 2009-10-08 14:45:47 -0500 (Thu, 08 Oct 2009) | 44 lines
Make filestream frame handling safer by isolating frames before returning them.
This patch is related to a number of issues on the bug tracker that show
crashes related to freeing frames that came from a filestream. A number of
fixes have been made over time while trying to figure out these problems, but
there re still people seeing the crash. (Note that some of these bug reports
include information about other problems. I am specifically addressing
the filestream frame crash here.)
I'm still not clear on what the exact problem is. However, what is _very_
clear is that we have seen quite a few problems over time related to unexpected
behavior when we try to use embedded frames as an optimization. In some cases,
this optimization doesn't really provide much due to improvements made in other
areas.
In this case, the patch modifies filestream handling such that the embedded frame
will not be returned. ast_frisolate() is used to ensure that we end up with a
completely mallocd frame. In reality, though, we will not actually have to malloc
every time. For filestreams, the frame will almost always be allocated and freed
in the same thread. That means that the thread local frame cache will be used.
So, going this route doesn't hurt.
With this patch in place, some people have reported success in not seeing the
crash anymore.
(SWP-150)
(AST-208)
(ABE-1834)
(issue #15609)
Reported by: aragon
Patches:
filestream_frisolate-1.4.diff2.txt uploaded by russell (license 2)
Tested by: aragon, russell
(closes issue #15817)
Reported by: zerohalo
Tested by: zerohalo
(closes issue #15845)
Reported by: marhbere
Review: https://reviewboard.asterisk.org/r/386/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r222799 | rmudgett | 2009-10-08 11:44:33 -0500 (Thu, 08 Oct 2009) | 19 lines
Merged revisions 222797 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222797 | rmudgett | 2009-10-08 11:33:06 -0500 (Thu, 08 Oct 2009) | 12 lines
Fix memory leak if chan_misdn config parameter is repeated.
Memory leak when the same config option is set more than once in an
misdn.conf section. Why must this be considered? Templates! Defining a
template with default port options and later adding to or overriding some
of them.
Patches:
memleak-misdn.patch
JIRA ABE-1998
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r222692 | rmudgett | 2009-10-07 16:56:36 -0500 (Wed, 07 Oct 2009) | 21 lines
Merged revisions 222691 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222691 | rmudgett | 2009-10-07 16:51:24 -0500 (Wed, 07 Oct 2009) | 14 lines
chan_misdn.c:process_ast_dsp() memory leak
misdn.conf: astdtmf must be set to "yes". With "no", buffer loss does not
occur.
The translated frame "f2" when passing through ast_dsp_process() is not
freed whenever it is not used further in process_ast_dsp(). Then in the
end it is never ever freed.
Patches:
translate.patch
JIRA ABE-1993
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This looks like it was just missed during a merge.
(closes issue #15841)
Reported by: amorsen
Patches:
ast_devstate_aggregate_init-in-ast_extension_state2.patch uploaded by amorsen (license 676)
Tested by: amorsen
(closes issue #15852)
Reported by: amorsen
Tested by: amorsen, farisraouf
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222605 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The variable index used in this scenario for accessing the dahdi_pvts was
wrong and was most likely copied from the several other places it is used
correctly.
(closes issue #15998)
Reported by: tsearle
Patches:
dahdi_reset_crash.patch uploaded by tsearle (license 373)
Modified:
branches/1.4/channels/chan_dahdi.c
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222395 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r222351 | jpeeler | 2009-10-06 15:35:19 -0500 (Tue, 06 Oct 2009) | 9 lines
Fix 222298 (crash during destruction of second channel when variable set with
setvar).
I mistakenly reasoned that setvar would be used on all channels. Since it can
be set per channel, give each dahdi channel a copy of the variable.
(related to #15899)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222352 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r222298 | jpeeler | 2009-10-06 14:24:59 -0500 (Tue, 06 Oct 2009) | 9 lines
Fix crash during destruction of second channel when variable set with setvar.
The setvar line in chan_dahdi.conf is shared among all the channels, so make
sure to only free the resources only when the last channel is destroyed.
(closes issue #15899)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r222273 | tilghman | 2009-10-06 14:17:11 -0500 (Tue, 06 Oct 2009) | 5 lines
When we call a gosub routine, the variables should be scoped to avoid contaminating the caller.
This affected the ~~EXTEN~~ hack, where a subroutine might have changed the
value before it was used in the caller.
Patch by myself, tested by ebroad on #asterisk
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222279 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r222176 | kpfleming | 2009-10-05 20:24:24 -0500 (Mon, 05 Oct 2009) | 27 lines
Recorded merge of revisions 222152 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r222152 | kpfleming | 2009-10-05 20:16:36 -0500 (Mon, 05 Oct 2009) | 20 lines
Fix ao2_iterator API to hold references to containers being iterated.
See Mantis issue for details of what prompted this change.
Additional notes:
This patch changes the ao2_iterator API in two ways: F_AO2I_DONTLOCK
has become an enum instead of a macro, with a name that fits our
naming policy; also, it is now necessary to call
ao2_iterator_destroy() on any iterator that has been
created. Currently this only releases the reference to the container
being iterated, but in the future this could also release other
resources used by the iterator, if the iterator implementation changes
to use additional resources.
(closes issue #15987)
Reported by: kpfleming
Review: https://reviewboard.asterisk.org/r/383/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222185 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r222110 | kpfleming | 2009-10-05 14:45:00 -0500 (Mon, 05 Oct 2009) | 25 lines
Allow non-compliant T.38 endpoints to be supportable via configuration option.
Many T.38 endpoints incorrectly send the maximum IFP frame size they can accept
as the T38FaxMaxDatagram value in their SDP, when in fact this value is
supposed to be the maximum UDPTL payload size (datagram size) they can accept.
If the value they supply is small enough (a commonly supplied value is '72'),
T.38 UDPTL transmissions will likely fail completely because the UDPTL packets
will not have enough room for a primary IFP frame and the redundancy used for
error correction. If this occurs, the Asterisk UDPTL stack will emit log messages
warning that data loss may occur, and that the value may need to be overridden.
This patch extends the 't38pt_udptl' configuration option in sip.conf to allow
the administrator to override the value supplied by the remote endpoint and
supply a value that allows T.38 FAX transmissions to be successful with that
endpoint. In addition, in any SIP call where the override takes effect, a debug
message will be printed to that effect. This patch also removes the
T38FaxMaxDatagram configuration option from udptl.conf.sample, since it has not
actually had any effect for a number of releases.
In addition, this patch cleans up the T.38 documentation in sip.conf.sample
(which incorrectly documented that T.38 support was passthrough only).
(issue #15586)
Reported by: globalnetinc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@222111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r221844 | rmudgett | 2009-10-01 20:09:31 -0500 (Thu, 01 Oct 2009) | 33 lines
Merged revisions 221769 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221769 | rmudgett | 2009-10-01 18:18:28 -0500 (Thu, 01 Oct 2009) | 26 lines
Occasionally losing use of B channels in chan_misdn.
I have not been able to reproduce the problem of losing channels.
However, I have seen in the code a reentrancy problem that might give
these symptoms.
The reentrancy patch does several things:
1) Guards B channel and B channel structure allocation.
2) Makes the B channel structure find routines more precise in locating records.
3) Never leave a B channel allocated if we received cause 44.
The last item may cause temporary outgoing call problems, but they should
clear when the line becomes idle.
(closes issue #15490)
Reported by: slutec18
Patches:
issue15490_channel_alloc_reentrancy.patch uploaded by rmudgett (license 664)
Tested by: rmudgett, slutec18
(closes issue #15458)
Reported by: FabienToune
Patches:
issue15458_channel_alloc_reentrancy.patch uploaded by rmudgett (license 664)
Tested by: FabienToune, rmudgett, slutec18
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@221853 65c4cc65-6c06-0410-ace0-fbb531ad65f3
