ast_addressfamily_to_sockaddrize will determine the size that's
required, and ast_sockaddr_from_sockaddr then wraps this new function
and ast_sockaddr_copy_sockaddr to copy arbitrary sockaddr's (without
knowing the address family) into the ast_sockaddr structure.
Change-Id: Iee604e96e9096c79b477d6e5ff310cf0b06dae86
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Some body generators, such as dialog-info+xml, require storing state
information which is then conveyed in the NOTIFY request itself. Up
until now there was no way for such body generators to persist this
information.
Two new API calls have been added to allow body generators to set and
get persisted data. This data is persisted out alongside the normal
persistence information and allows the body generator to restore
state information or to simply use this for normal storage of state.
State is stored in the form of JSON and it is up to the body
generator to interpret this as needed.
The dialog-info+xml body generator has been updated to take advantage
of this to persist the version number.
ASTERISK-27759
Change-Id: I5fda56c624fd13c17b3c48e0319b77079e9e27de
Adds source port matching support when IP matching is used:
[example]
type = identify
match = 1.2.3.4:5060/32, 1.2.3.4:6000/32, asterisk.org:4444
If the IP matches but the source port does not, we reject and search for
alternatives. SRV lookups are still performed if enabled (srv_lookups = yes),
unless the configured FQDN includes a port number in which case just a host
lookup is performed.
ASTERISK-28639 #close
Reported by: Mitch Claborn
Change-Id: I256d5bd5d478b95f526e2f80ace31b690eebba92
When a topic is created for an object, its name is only
<object>:<uniqueid>
For example:
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
When a topic is added to a pool, its name has the pool's topic
name prepended. For example:
bridge:all/bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
The topic_pool_entry's name however, is only what was passed
in to stasis_topic_pool_get_topic which is
bridge:cb68b3a8-fce7-4738-8a17-d7847562f020
That's actually correct because the entry is qualified by the
pool that's in.
When you're ready to delete the entry from the pool, you retrieve
the tropic name from the object but since it now has the pool's
topic name prepended, it won't be found in the pool container.
Fix:
* Modified stasis_topic_pool_delete_topic() to skip past the
pool topic's name, if it was prepended to the topic name,
before searching the container for a pool entry.
ASTERISK-28633
Reported by: Joeran Vinzens
Change-Id: I4396aa69dd83e4ab84c5b91b39293cfdbcf483e6
When TLS is in use, checking the readiness of the underlying FD is insufficient
for determining if there is data available to be read. So before polling the
FD, check if there is any buffered data in the TLS layer and use that first.
ASTERISK-28562 #close
Reported by: Robert Sutton
Change-Id: I95fcb3e2004700d5cf8e5ee04943f0115b15e10d
Instead of trying to use the defined MySQL client version from the
header use a configure check to determine whether the bool or my_bool
type should be used for defining a boolean.
ASTERISK-28604
Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7
ConfBridge has the ability to move between different sample
rates for mixing the conference bridge. Up until now there has
only been the ability to set the conference bridge to mix at
a specific sample rate, or to let it move between sample rates
as necessary. This change adds the ability to configure a
conference bridge with a maximum sample rate so it can move
between sample rates but only up to the configured maximum.
ASTERISK-28658
Change-Id: Idff80896ccfb8a58a816e4ce9ac4ebde785963ee
A previous patch:
Gerrit Change-Id: I73bb24799bfe1a48adae9c034a2edbae54cc2a39
made it so a T.38 Gateway tries to negotiate with both sides by sending T.38
negotiation request to both endpoints supported T.38 versus the previous
behavior of forwarding negotiation to the "other" channel once a preamble
was detected.
This had the unfortunate side effect of breaking some setups. Specifically
ones that set the max datagram option on an endpoint configuration (configured
max datagram was not propagated since Asterisk now initiates negotiations).
This patch adds a configuration option, "negotiate_both", that when enabled
makes it so Asterisk initiates the negotiation requests to both endpoints vs.
the previous behavior of waiting, and forwarding the request.
The default is disabled keeping with the old behavior.
ASTERISK-28660
Change-Id: I5deb875f3485e20bc75119ec743090655d864a1a
Due to use in res_rtp_asterisk there is a need to be able to apply an
ACL without logging any invalid/denies. It's probably sensible to at
least validate the ACL once directly after load and report invalid ACLs.
Change-Id: I256169229d945ca7c1bbf228fc492d91df345843
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This patch fixes several issues reported by the lgtm code analysis tool:
https://lgtm.com/projects/g/asterisk/asterisk
Not all reported issues were addressed in this patch. This patch mostly fixes
confirmed reported errors, potential problematic code points, and a few other
"low hanging" warnings or recommendations found in core supported modules.
These include, but are not limited to the following:
* innapropriate stack allocation in loops
* buffer overflows
* variable declaration "hiding" another variable declaration
* comparisons results that are always the same
* ambiguously signed bit-field members
* missing header guards
Change-Id: Id4a881686605d26c94ab5409bc70fcc21efacc25
Both res_pjsip and res_pjsip_mwi made use of serializer pools. However, they
both implemented their own serializer pool functionality that was pretty much
identical in each of the source files. This patch removes the duplicated code,
and uses the new 'ast_serializer_pool' object instead.
Additionally res_pjsip_mwi enables a shutdown group on the pool since if the
timing was right the module could be unloaded while taskprocessor threads still
needed to execute, thus causing a crash.
Change-Id: I959b0805ad024585bbb6276593118be34fbf6e1d
Serializer pools have previously existed in Asterisk. However, for the most
part the code has been duplicated across modules. This patch abstracts the
code into an 'ast_serializer_pool' object. As well the code is now centralized
in serializer.c/h.
In addition serializer pools can now optionally be monitored by a shutdown
group. This will prevent the pool from being destroyed until all serializers
have completed.
Change-Id: Ib1e906144b90ffd4d5ed9826f0b719ca9c6d2971
Add a new dialplan function PJSIP_MOH_PASSTHROUGH that allows
the on-hold behavior to be controlled on a per-call basis
ASTERISK-28542 #close
Change-Id: Iebe905b2ad6dbaa87ab330267147180b05a3c3a8
Previous to this patch passing a NULL tag to ao2_alloc or ao2_ref based
functions would result in the reference not being logged under
REF_DEBUG. This could sometimes cause inaccurate logging if NULL was
accidentally passed to a reference action. Now reference logging is
only disabled by option passed to the allocation method.
Change-Id: I3c17d867d901d53f9fcd512bef4d52e342637b54
This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
When modifying an already defined variable in some channel drivers they
add a new variable with the same name to the list, but that value is
never used, only the first one found.
Introduce ast_variable_list_replace() and use it where appropriate.
ASTERISK-23756 #close
Patches:
setvar-multiplie.patch submitted by Michael Goryainov
Change-Id: Ie1897a96c82b8945e752733612ee963686f32839
This change adds H.265/HEVC as a known codec and creates a cached
"h265" media format for use.
Note that RFC 7798 section 7.2 also describes additional SDP
parameters. Handling of these is not yet supported.
ASTERISK-28512
Change-Id: I26d262cc4110b4f7e99348a3ddc53bad0d2cd1f2
Added unit tests for RTCP video stats. These tests include NACK, REMB,
FIR/FUR/PLI, SR/RR/SDES, and packet loss statistics. The REMB and FIR
tests are currently disabled due to a bug. We expect to receive a
compound packet, but the code sends this out as a single packet, which
the browser accepts, but makes Asterisk upset.
While writing these tests, I noticed an issue with NACK as well. Where
it is handling a received NACK request, it was reading in only the first
8 bits of following packets that were also lost. This has been changed
to the correct value of 16 bits.
Also made a minor fix to the data buffer unit test.
Change-Id: I56107c7411003a247589bbb6086d25c54719901b
The new function takes in a pointer to an ast_sockaddr structure,
a hostname and an optional port and then dispatches parallel
"AAAA" and "A" record queries. If an "AAAA" record is returned,
it's parsed into the ast_sockaddr structure along with the port
if it was supplied. If no "AAAA" record was returned, the
first "A" record returned (if any) is parsed instead.
This is a synchronous call. If you need asynchronous lookups,
use ast_dns_query_set_resolve_async and roll your own.
Change-Id: I194b0b0e73da94b35cc35263a868ffac3a8d0a95
There are 4 scenarios to consider when capturing audio from a channel
with an audiohook:
1. There is no rx and no tx audio, so return nothing.
2. There is rx but no tx audio, so return rx.
3. There is tx but no rx audio, so return tx.
4. There is rx and tx audio, so mix them and return.
The file passed as the primary argument to MixMonitor will be written to
in scenarios 2, 3, and 4. However, if you pass the r() and t() options
to MixMonitor, a frame will only be written to the r() file if there was
rx audio and a frame will only be written to the t() file if there was
tx audio.
If you subsequently take the r() and t() files and try to mix them, the
sides of the conversation will 'drift' and be non-representative of the
user experience.
This patch adds a new 'S' option to MixMonitor that injects a frame of
silence on either the r() side or the t() side of the channel so that
when later mixed, there is no such drift.
Change-Id: Ibf5ed73a811087727bd561a89a59f4447b4ee20e
When updating times on CDR or CEL records using the time at which
it is done can result in times being incorrect if the system is
heavily loaded and stasis message processing is delayed.
This change instead makes it so CDR and CEL use the time at which
the stasis messages that drive the systems are created. This allows
them to be backed up while still producing correct records.
ASTERISK-28498
Change-Id: I6829227e67aefa318efe5e183a94d4a1b4e8500a
When fixing ASTERISK~24212, a change was done so a scheduled callback could not
be removed while it was running. The caller of ast_sched_del would have to wait.
However, when the caller of ast_sched_del is the callback itself (however wrong
this might be), this new check would cause a deadlock: it would wait forever
for itself.
This changeset introduces an additional check: if ast_sched_del is called
by the callback itself, it is immediately rejected (along with an ERROR log and
a backtrace). Additionally, the AST_SCHED_DEL_UNREF macro is adjusted so the
after-ast_sched_del-refcall function is only run if ast_sched_del returned
success.
This should fix the following spurious race condition found in chan_sip:
- thread 1: schedule sip_poke_peer_now (using AST_SCHED_REPLACE)
- thread 2: run sip_poke_peer_now
- thread 2: blank out sched-ID (too soon!)
- thread 1: set sched-ID (too late!)
- thread 2: try to delete the currently running sched-ID
After this fix, an ERROR would be logged, but no deadlocks (in do_monitor) nor
excess calls to sip_unref_peer(peer) (causing double frees of rtp_instances and
other madness) should occur.
(Thanks Richard Mudgett for reviewing/improving this "scary" change.)
Note that this change does not fix the observed race condition: unlocked
access to peer->pokeexpire (and potentially other scheduled items in chan_sip),
causing AST_SCHED_DEL_UNREF to look at a changing id. But it will make the
deadlock go away. And in the observed case, it will not have adverse affects
(like memory leaks) because the scheduled item is removed through a different
path.
ASTERISK-28282
Change-Id: Ic26777fa0732725e6ca7010df17af77a012aa856
When a channel already in a conference bridge is attended transfered
to another extension, or when an existing call is attended
transferred into a conference bridge, we now generate ConfbridgeJoin
and ConfbridgeLeave events for the entering and departing channels.
Change-Id: Id7709cfbceb26fbcb828b2d0d2a6b2fbeaf028e1
This change adds support for larger TLS certificates by allowing
OpenSSL to fragment the DTLS packets according to the configured
MTU. By default this is set to 1200.
This is accomplished by implementing our own BIO method that
supports MTU querying. The configured MTU is returned to OpenSSL
which fragments the packet accordingly. When a packet is to be
sent it is done directly out the RTP instance.
ASTERISK-28018
Change-Id: If2d5032019a28ffd48f43e9e93ed71dbdbf39c06
Added a conversion for umax (largest maximum sized integer allowed). Adjusted
the other current conversion functions (uint and ulong) to be derivatives of
the umax conversion since they are simply subsets of umax.
Also made the negative check move the pointer on spaces since strtoumax does it
anyways.
Change-Id: I56c2ef2629d49b524c8df58af12951c181f81f08
After a bridge has been deleted the stasis control will depart
the channel and might attempt to re-add it to the dial bridge.
The later can fail and this can lead to a situation that the stasis
control is unlinked but the after_bridge_cb_failed cb is executed trying
to access a dangling control object.
Fix it by calling the after_cb's before bridge_channel_impart_signal.
ASTERISK-26718
Change-Id: Ib4e8f70d7a21bd54afe3cb51cc6717ef7c355496
When producing a combined REMB value the normal behavior
is to have a REMB value which is unique for each sender
based on all of their receivers. This can result in one
sender having low bitrate while all the rest are high.
This change adds "all" variants which produces a bridge
level REMB value instead. All REMB reports are combined
together into a single REMB value that is the same for
each sender.
ASTERISK-28401
Change-Id: I883e6cc26003b497c8180b346111c79a131ba88c
The transport-cc draft is a mechanism by which additional information
about packet reception can be provided to the sender of packets so
they can do sender side bandwidth estimation. This is accomplished
by having a transport specific sequence number and an RTCP feedback
message. This change implements this in the receiver direction.
For each received RTP packet where transport-cc is negotiated we store
the time at which the RTP packet was received and its sequence number.
At a 1 second interval we go through all packets in that period of time
and use the stored time of each in comparison to its preceding packet to
calculate its delta. This delta information is placed in the RTCP
feedback message, along with indicators for any packets which were not
received.
The browser then uses this information to better estimate available
bandwidth and adjust accordingly. This may result in it lowering the
available send bandwidth or adjusting how "bursty" it can be.
ASTERISK-28400
Change-Id: I654a2cff5bd5554ab94457a14f70adb71f574afc
Added RINGTIME, RINGTIME_MS, PROGRESSTIME, PROGRESSTIME_MS variables filled
at the earliest received PROGRESS or RINGING.
Added millisecond versions of DIALEDTIME and ANSWEREDTIME.
Added millisecond versions of ast_channel_get_up_time and
ast_channel_get_duration in channel.c.
ASTERISK-28363
Change-Id: If95f1a7d8c4acbac740037de0c6e3109ff6620b1
There is enough MWI functionality to warrant it having its own 'c' and header
files. This patch moves all current core MWI data structures, and functions
into the following files:
main/mwi.h
main/mwi.c
Note, code was simply moved, and not modified. However, this patch is also in
preparation for core MWI changes, and additions to come.
Change-Id: I9dde8bfae1e7ec254fa63166e090f77e4d3097e0
Added a new PJSIP global setting called norefersub.
Default is true to keep support working as before.
res_pjsip_refer: Configures PJSIP norefersub capability accordingly.
Checks the PJSIP global setting value.
If it is true (default) it adds the norefersub capability to PJSIP.
If it is false (disabled) it does not add the norefersub capability
to PJSIP.
This is useful for Cisco switches that do not follow RFC4488.
ASTERISK-28375 #close
Reported-by: Dan Cropp
Change-Id: I0b1c28ebc905d881f4a16e752715487a688b30e9
It was difficult to check the channel's current application and
parameters using ARI for current channels. Added app_name, app_data
items to show the current application information.
ASTERISK-28343
Change-Id: Ia48972b3850e5099deab0faeaaf51223a1f2f38c
