We read beyond the end of the buffer when copying the string out of the
buffer when we used ast_copy_string() because the original string was
not null terminated. Instead switch to ast_strndup() which does not
exhibit the same behavior.
ASTERISK-28975 #close
Change-Id: Ib4a75cffeb1eb8cf01136ef30306bd623e531a2a
Currently when the pjsip making an outgoing request, it keep adding the
rport parameter in a request message as a default.
This causes unexpected rport handle at the other end.
Added option for disable this behaviour in the pjsip.conf.
This is a system option, but working as a gloabl option.
ASTERISK-28959
Change-Id: I9596675e52a742774738b5aad5d1fec32f477abc
Do not return error if the client received ping frame
while looking for a string and just wait for another frame.
ASTERISK-28958 #close
Change-Id: I4d06b4827bd71e56cbaafc011ffdcef9f0332922
When using the PSJIP_MEDIA_OFFER dialplan function it was not
overriding an endpoint's configured codecs on refresh unless
they had a shared codec between the two.
This patch makes it so whatever is set using PJSIP_MEDIA_OFFER
is used when creating the SDP for a refresh no matter what.
ASTERISK-28878 #close
Change-Id: I0f7dc86fd0fb607c308e6f98ede303c54d1eacb6
The outbound proxy for an AOR was not being applied to
any statically configured Contacts. This resulted in the
OPTIONS requests being sent to the wrong target.
This change sets the outbound proxy on statically configured
contacts once the AOR configuration is done being
applied.
ASTERISK-28965
Change-Id: Ia60f3e93ea63f819c5a46bc8b54be2e588dfa9e0
1) Fix memory-leaks
Added code to release ast_events extracted from corosync and stasis messages
2) Clean stasis cache when a member of the corosync cluster leaves the group
Added code to remove from the stasis cache of the members remained on the
group all the messages with the EID of the left member.
If the device states of the left member remain in the stasis cache of other
members, they will not be updated anymore and high priority cached values,
like BUSY, will take precedence over current device states.
3) Stop corosync event propagation when node is not joined to the group
Updated dispatch_thread_handler code to detect when asterisk is not joined
to the corosync group and added some condition in publish_event_to_corosync
code to send corosync messages only when joined.
When a node is not joined its corosync daemon can't send messages:
the cpg_mcast_joined function append new messages to the FIFO buffer until
it's full and then it blocks indefinitely.
In this scenario if the stasis_message_cb callback, registered by
res_corosync to handle stasis messages, try to send a corosync messages,
the thread of the stasis thread-pool will be blocked until the node join
the corosync cluster.
ASTERISK-28888
Reported by: Università di Bologna - CESIA VoIP
Change-Id: Ie8e99bc23f141a73c13ae6fb1948d148d4de17f2
The AMI action and CLI command did not take into account the properties
of full backend caching. This resulted in an expired object remaining
removed until a full backend update occurred, instead of having the
object updated when needed.
This change makes it so that the AMI action and CLI command for object
expire will now fail instead of putting the cache into an undesired
state. If full backend caching is enabled then only operations
which act on the entire cache are available.
ASTERISK-28942
Change-Id: Id662d888f177ab566c8e802ad583083b742d21f4
When a re-INVITE is received we create a new set of
streams that are then swapped in as the active streams.
We did not preserve the SDP label from the previous
streams, resulting in the label getting lost.
This change ensures that if an SDP label is present
on the previous stream then it is set on the new stream.
ASTERISK-28953
Change-Id: I9dd63b88b562fe96ce5c791a3dae5bcaca258445
This patch makes the usual necessary changes when upgrading to a new
version pjproject. For instance, version number bump, patches removed
from third-party, new *.md5 file added, etc..
This patch also includes a change to the Asterisk pjproject Makefile to
explicitly create the 'source/pjsip-apps/lib' directory. This directory
is no longer there by default so needs to be added so the Asterisk
malloc debug can be built.
This patch also includes some minor changes to Asterisk that were a result
of the upgrade. Specifically, there was a backward incompatibility change
made in 2.10 that modified the "expires header" variable field from a
signed to an unsigned value. This potentially effects comparison. Namely,
those check for a value less than zero. This patch modified a few locations
in the Asterisk code that may have been affected.
Lastly, this patch adds a new macro PJSIP_MINVERSION that can be used to
check a minimum version of pjproject at compile time.
ASTERISK-28899 #close
Change-Id: Iec8821c6cbbc08c369d0e3cd2f14e691b41d0c81
If channelId parameters were passed in the body, the Asterisk doesn't parsing it correctly.
Fixed it to parse the channelId, other_channel_id parameter correclty.
ASTERISK-28948
Change-Id: I59b49161a94869169ee19c1ffab5afcef7026157
The "value" passed in when setting an RTP property determines
whether it should be enabled or disabled. The RTP send and
receive retrans props did not examine this to know if the
buffers should be enabled. They assumed they always should be.
This change makes it so that the "value" passed in is
respected.
ASTERISK-28939
Change-Id: I9244cdbdc5fd065c7f6b02cbfa572bc55c7123dc
When fax_gateway_framehook is called and a gateway hasn't already
been started, the framehook gets the t38 state for both the current
channel and the peer. That call trickles down to the channel
driver which determines the state. If either channel is hung up
(or in the process of being hung up), the channel driver's tech_pvt
is going to be NULL which, in the case of chan_pjsip, will cause a
segfault.
* Added a hangup check for both the channel and peer channel
before starting a fax gateway.
* Added a check for NULL tech_pvt to chan_pjsip_queryoption
so we don't attempt to reference a tech_pvt that's already
gone.
ASTERISK-28923
Reported by: Yury Kirsanov
Change-Id: I4e10e63b667bbb68c1c8623f977488f5d807897c
This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
If parameters were passed in the body as JSON to the
create route they were not being parsed before checking
to ensure that required fields were set.
This change moves the parsing so it occurs before
checking.
ASTERISK-28940
Change-Id: I898b4c3c7ae1cde19a6840e59f498822701cf5cf
You cannot cast a pjsip_uri to a pjsip_sip_uri using pjsip_uri_get_uri,
without checking that it's a PJSIP_URI_SCHEME_IS_SIP(S).
ASTERISK-28936
Change-Id: I9f572b3677e4730458e9402719e580f8681afe2a
In a particular fax gateway scenario whereby it would
have to translate using the read translation path on a
channel the frame being translated would be consumed.
When the frame is in the write path it is not permitted
to free the frame as the caller expects it to continue
to exist.
This change makes it so that the frame is only consumed
on the read path where it is acceptable to free it.
ASTERISK-28900
Change-Id: I011c321288a1b056d92b37c85e229f4a28ee737d
When writing tx messages to pcap files, Asterisk is using the wrong
pointer resulting in lots of wasted space. This patch fixes it to use
the correct pointer.
ASTERISK-28932 #close
Change-Id: I5b8253dd59a083a2ca2c81f232f1d14d33c6fd23
files
fwrite() does return the number of elements written and not the
number of bytes. However asterisk is currently comparing the return
value to the size of the written element what means that asterisk logs
five WARNING messages on every packet written to the pcap file.
This patch changes the code to check for the correct value, which will
always be 1.
ASTERISK-28921 #close
Change-Id: I2455032d9cb4c5a500692923f9e2a22e68b08fc2
When replacing the user portion of the Contact URI the code
was using the ephemeral pool instead of the tdata pool. This
could cause the Contact user value to become invalid after a
period of time.
The code will now use the tdata pool which persists for the
lifetime of the message instead.
ASTERISK-28794
Change-Id: I31e7b958e397cbdaeedd0ebb70bcf8dd2ed3c4d5
While asterisk is filtering out the x-ast-orig-host parameter from the
contact on response messages, it is not filtering it out from the
request URI and the to header on SIP requests (for example INVITE).
ASTERISK-28884 #close
Change-Id: Id032b33098a1befea9b243ca994184baecccc59e
When a configuration file in Asterisk is loaded
information about it is stored such that on a
reload it is not reloaded if nothing has changed.
This can be problematic when an error exists in
a configuration file in PJSIP since the error
will be output at start and not subsequently on
reload if the file is unchanged.
This change makes it so that if an error is
encountered when res_sorcery_config is loading
a configuration file a reload will always read
in the configuration file, allowing the error
to be seen easier.
Change-Id: If2e05a017570f1f5f4f49120da09601e9ecdf9ed
The flags of a previous selection could have been set within the
object 'srtp', for example, when the previous selection returned
failure after setting just 'some' flags. Now, not to clutter the
code, all possible flags are cleared first, and then the selected
flags are set as before.
ASTERISK-28903
Change-Id: I1b9d7aade7d5120244ce7e3a8865518cbd6e0eee
The PJSIP packet logger now has the following CLI commands:
pjsip set logger pcap <filename>
When used this will create a pcap file containing the incoming
and outgoing SIP packets, in unencrypted form.
pjsip set logger verbose <on / off>
This allows you to toggle logging to verbose on and off.
pjsip set logger host <IP/subnet mask> add
This allows you to add an additional IP address or subnet
mask to logging, allowing you to log multiple instead of
just a single IP address or all traffic.
The normal "pjsip set logger host" CLI command has also been
expanded to allow subnet masks as well.
ASTERISK-28895
Change-Id: If5859161a72b0d7dd2d1f92d45bed88e0cd07d0e
A warning was triggered that there may be a problem regarding file
extension (which is correct and should not be set anyway). The warning
also appeared if there was dot within the path itself.
E.g.
[sales-queue-hold]
mode=playlist
entry=/var/www/domain.tld/moh/funky_music
The music played correctly but you get a warning message.
Now there will be a check if the position of a potential dot character
is after the last position of a slash character. This dot charachter
will be treated as a extension naming. Dots within the path then ignored.
ASTERISK-28892
Reported-By: Nicholas John Koch
Change-Id: I2ec35a613413affbf5fcc01c8c181eba24865b9e
This change adds the same variable functionality that
is available for originating a channel to the create
call. Now when creating a channel you can specify
dialplan variables to set instead of having to do another
API call.
ASTERISK-28896
Change-Id: If13997ba818136d7c070585504fc4164378aa992
1. Modify sip_resolve and sip_resolve_callback to request AAAA lookups
when an IPV6 transport type has been requested.
2. Rename all occurrences of pjsip_transport_get_type_name to
pjsip_transport_get_type_desc. This ensures that the log/debug info
shows whether the transport is IPv6 or IPv4.
3. Do not add the constant PJSIP_TRANSPORT_IPV6 to existing transport
types. This results in invalid values. Use a bitwise or instead.
ASTERISK-26780
Patches:
pjsip_resolver.c uploaded by Peter Sokolov (License #7070)
Change-Id: I8b1e298f8efa682d0a7644113258fe76d9889c58
Changed source and destination address fields in struct
pjsip_history_entry so that they are long enough to hold an IPv6
address.
ASTERISK-28854
Change-Id: Id65bb9aa961e9ecbcb500815e18170f774e34d3e
Recently code accessing nochecksums variable has been added without including #ifdef SO_NO_CHECK protection, while the variable is created only when such constant is defined.
ASTERISK-28852 #close
Change-Id: I381718893b80599ab8635f2b594a10c1000d595e
Some places in Asterisk did not treat the formats on a stream
as immutable when they are.
The ast_stream_get_formats function is now const to enforce this
and parts of Asterisk have been updated to take this into account.
Some violations of this were also fixed along the way.
An additional minor tweak is that streams are now allocated with
an empty format capabilities structure removing the need in various
places to check that one is present on the stream.
ASTERISK-28846
Change-Id: I32f29715330db4ff48edd6f1f359090458a9bfbe
Fixed it to copy the entire string from the requested endpoint body except tech-prefix.
ASTERISK-28847
Change-Id: I91b5f6708a1200363f3267b847dd6a0915222c25
This change fixes a few re-negotiation issues
uncovered with fax.
1. The fax support uses its own mechanism for
re-negotiation by conveying T.38 information in
its own frames. The new support for re-negotiating
when adding/removing/changing streams was also
being triggered for this causing multiple re-INVITEs.
The new support will no longer trigger when
transitioning between fax.
2. In off-nominal re-negotiation cases it was
possible for some state information to be left
over and used by the next re-negotiation. This
is now cleared.
ASTERISK-28811
ASTERISK-28839
Change-Id: I8ed5924b53be9fe06a385c58817e5584b0f25cc2
MODULEINFO is checked while buidling/linking the module.
AST_MODULE_INFO is checked while loading/running the module.
ASTERISK-28838
Change-Id: I4bb868532ca217fec1351885d99eb55c21b58042
When the receive buffer was flushed by a received packet while it
already contained a packet with the same sequence number, Asterisk
never left the while loop which tried to order the packets.
This change makes it so if the packet is in the receive buffer it
is retrieved and freed allowing the buffer to empty.
ASTERISK-28827
Change-Id: Idaa376101bc1ac880047c49feb6faee773e718b3
When the ast_data_buffer_put rejects to add a packet, for example because
the buffer already contains a packet with the same sequence number, the
payload will never be freed, resulting in a memory leak.
The data buffer will now return an error if this situation occurs
allowing the caller to free the payload. The res_rtp_asterisk module
has also been updated to do this.
ASTERISK-28826
Change-Id: Ie6c49495d1c921d5f997651c7d0f79646f095cf1
By using pjproject to give us a list of candidates, and then filtering,
if the host has >32 addresses configured, then it is possible that we
end up filtering out all 32 of those, and ending up with no candidates
at all. Instead, get getifaddrs (which pjsip is using underlying
anyway) to retrieve all local addresses, and iterate those, adding the
first 32 addresses not excluded by the ICE ACL.
In our setup at any point in time We've got between 6 and 328 addresses
on any given system. The lower limit is the lower limit but the upper
limit is growing on a near daily basis currently.
Change-Id: I109eaffc3e2b432f00bf958e3caa0f38cacb4edb
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This reverts commit a3a2fbaec6.
Reason for revert: There is a lot of code that relies on the broken
behavior that this fixes.
Change-Id: I410c395a0168acbdaf89e616e3cb5e1312d190cb
When an AOR is modified endpoints are updated that reference
the AOR so they can start receiving updates and reflect the
correct state. If this is the case then we shouldn't change
the endpoint to be offline if it does not reference the AOR
but instead only when the endpoint is completely updated for
all its AORs.
ASTERISK-28056
patches:
pjsip_options-aor.diff submitted by jhord (license 6978)
Change-Id: I3ee00023be2393113cd4e056599f23f3499ef164
RFC5621 requires any content type with a Content-Disposition
with handling=required to be rejected with a 415 response
ASTERISK-28782 #close
Change-Id: Iad969df75936730254b95c1a8bc3b48497070bb4
When an outgoing channel is created a list of formats may
optionally be provided which is used as a request that the
formats be used if possible. If an endpoint is not configured
for any of the formats we ignore this request and use what is
configured. This has the side effect of also including other
stream types (such as video) that were not present in the
requested formats.
This change makes it so that the intention of the request is
preserved - that is if only an audio format is requested then
even if there is no joint audio format between the request and
the configuration we will still only place an audio stream in
the outgoing call.
ASTERISK-28787
Change-Id: Ia54c0c63e94aca176169b9bae4bb8a8380ea245f
