This small feature will help to checking the bridge's status to
figure out which bridge is in old/zombie or not. Also added
detail items for the 'bridge show *' cli to provide more detail
info. And added creation item to the ARI as well.
ASTERISK-28279
Change-Id: I460238c488eca4d216b9176576211cb03286e040
PJSIP assumes that these header names are not allocated, and does not
clone the name strings when reusing headers.
Block unload of res_pjsip_diversion until shutdown to ensure static
memory stays valid.
ASTERISK-28312 #close
Change-Id: Ibd6ea55ec4a604bbd43ac07f8d0b54da2c39b8b9
apply_negotiated_sdp_stream was returning a "1" when no joint
capabilities were found on an outgoing call instead of a "-1".
This indicated to res_pjsip_session that the handler DID handle
the sdp when in fact it didn't. Without the appropriate setup,
a subsequent media frame coming in would have an invalid stream_num
and cause a seg fault when the stream was attempted to be retrieved.
apply_negotiated_sdp_stream now returns the correct "-1" and any
media is now discarded before it reaches the core stream processing.
ASTERISK-28260
Reported by: Sotiris Ganouris
Change-Id: Ia095cb16b4862f2f6ad6d2d2a77453fa2542371f
This reverts commit d524ad523d.
Reason for revert: This causes Contact and Via headers to have the wrong
transport address.
ASTERISK-28309 #close
Change-Id: Ibba4d6176f68e39279fcd9a545f81d56e747bed8
If both send_registrations and send_auth are both set to yes,
outbound_auth/username must be set or we crash.
ASTERISK-27992 #close
Change-Id: I6418d56de1ae53f80393b314c2584048fbf7f11d
Rather than calling ast_odbc_find_table() in the prepare callback, call
it beforehand and pass it in to the callback to avoid the need for a
second connection.
ASTERISK-28166 #close
Change-Id: I6f8a0b9990d636fd6bc1a92ed70f7050d2436202
When a contact was removed by the registrar it did not always check to see if
the circumstances involved a monitored reliable transport. For instance, if the
'remove_existing' option was set to 'true' then when existing contacts were
removed due to 'max_contacts' being reached, those existing contacts being
removed did not unregister the transport monitor.
Also, it was possible to add more than one monitor on a reliable transport for
a given aor and contact.
This patch makes it so all contact removals done by the registrar also remove
any associated transport monitors if necessary. It also makes it so duplicate
monitors cannot be added for a given transport.
ASTERISK-28213
Change-Id: I94b06f9026ed177d6adfd538317c784a42c1b17a
This module allows presence subscriptions to voicemail boxes. This
allows common BLF keys to act as voicemail waiting indicators.
ASTERISK-28301
Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd
Delivery timeval in the smoother object will fall behind while a DTMF is
being generated. This can eventually lead to invalid rtp timestamps.
To prevent this from happening the smoother needs to be reset after every
DTMF to keep the timing up to date.
ASTERISK-28303 #close
Change-Id: Iaba3f7b428ebd72a4caa90e13b829ab4f088310f
When listing the applications the apps lock was incorrectly
locked twice instead of being locked and then unlocked.
ASTERISK-28302
Change-Id: If7d064592a9e88c0f1049214c50e02be6dabf79e
When processing SSRC attributes we were iterating through
all of them, even though we only need to know the remote
SSRC once. This was problematic because some browsers group
SSRCs together on a stream, and due to our negotiation only
end up using the first one. Since we set the second one as
the remote SSRC we would drop the received media from them
instead of allowing it through.
In the future this may be extended to allow SSRC groups
and to use information from the attributes.
Change-Id: I4dc87087dbe56a83aa65f0f897bbd4ca75ec1270
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
Event type filtering is now enabled, and configurable per application. An app is
now able to specify which events are sent to the application by configuring an
allowed and/or disallowed list(s). This can be done by issuing the following:
PUT /applications/{applicationName}/eventFilter
And then enumerating the allowed/disallowed event types as a body parameter.
ASTERISK-28106
Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b
Currently, the Asterisk's pjsip_session module does not keeping the
rtcp's stats info after it was removed. But by adding the results
vector and keeping it until session is destroying, it can give more
useful information for other modules.
ASTERISK-28253
Change-Id: Ib25c2d3fc4da084aecfde2a82c1b1d733bd64fa5
p2p_write updates txformat but doesn't require a smoother. If a smoother
was created by another bridge type the smoother could fall out of date causing
one way audio issues. To prevent this the smoother is now destroyed on the
start of native bridge.
ASTERISK-28284 #close
Change-Id: I84e67f144963787fff9b4d79ac500514fb40cdc6
A previous patch attempt to mitigate blocked threads on transport shutdown for
a given contact. It was thought that a second lock could be avoided by checking
the 'removing' flag on the transport monitor twice (once before and once after
the normal named aor locking). However as with usual threading issues if the
timing was right the original problem still occured.
This patch adds locking around the first 'removing' flag check and set, thus
nullifying the secondary check, so it was removed.
ASTERISK-28213
Change-Id: Iaa8e36e5311789549b76d8de42dfcea96013b2ed
When Asterisk is connected and used with a database the response
time of the database can cause problems in Asterisk if it is long.
Normally the only way to see this problem would be to retrieve a
backtrace from Asterisk and examine where things are blocked, or
examine the database to see if there is any indication of a
problem.
This change adds some basic query logging to make it easier to
investigate such a problem. When logging is enabled res_odbc will
now keep track of the number of queries executed, as well as the
query that has taken the longest time to execute. There is also
an option which will cause a WARNING message to be output if a
query takes longer than a configurable amount of time to execute.
This makes it easier and clearer for users that their database may
be experiencing a problem that could impact Asterisk.
ASTERISK-28277
Change-Id: I173cf4928b10754478a6a8c27dfa96ede0f058a6
Added ARI resource.
GET /ari/asterisk/ping : It returns "pong" message with timestamp
and asterisk id. It would be useful for simple heath check.
Change-Id: I8d24e1dcc96f60f73437c68d9463ed746f688b29
At AstriCon, there was a strong desire for the ability to completely
bypass dialplan when using ARI. This is possible through the automatic
creation of a context and a couple of extensions whenever an application
is started.
For example, if you have an application named 'ari-example', a context
named 'stasis-ari-example' will be automatically created whenever this
application is started as long as one does not already exist. Two
extensions (a match-all extension for Stasis and a 'h' extension) are
created within this context. Any endpoint that registers to Asterisk
within this context will send all calls to the corresponding Stasis
application. When the application is destroyed, the context is removed.
ASTERISK-28104 #close
Change-Id: Ie35bd93075e05b05e3ae129a83c9426931b7ebac
The context specified by 'regcontext' was not being created, so when Asterisk
attempted to later dynamically add an extension it would fail. This patch now
creates the context if a 'regcontext' is specified.
ASTERISK-28238
Change-Id: I0f36cf4ab0a93ff4b1cc5548d617ecfd45e09265
Testing revealed that the cache added no benefit but that it could
consume excessive memory.
Two new index related functions were created:
ast_sounds_get_index_for_file() and ast_media_index_update_for_file()
which restrict index updating to specific sound files.
The original ast_sounds_get_index() and ast_media_index_update()
calls are still available but since they no longer cache the results
internally, developers should re-use an index they may already have
instead of calling ast_sounds_get_index() repeatedly. If information
for only a single file is needed, ast_sounds_get_index_for_file()
should be called instead of ast_sounds_get_index().
The media_index directory scan code was elimininated in favor of
using the existing ast_file_read_dirs() function.
Since there's no more cache, ast_sounds_index_init now only
registers the sounds cli commands instead of generating the
initial index and subscribing to stasis format register/unregister
messages.
"sounds" is no longer a valid target for the "module reload"
command.
Both the sounds cli commands and the sounds ari resources were
refactored to only call ast_sounds_get_index() once per invocation
and to use ast_sounds_get_index_for_file() when a specific sound
file is requested.
Change-Id: I1cef327ba1b0648d85d218b70ce469ad07f4aa8d
Control frames (PING / PONG / CLOSE) can be received in the middle of a
fragmented message. In order to ensure they do not interfere with the
reassembly buffer, we exit early and do not return the payload to the
caller.
ASTERISK-28257 #close
Change-Id: Ia5367144fe08ac6141bba3309517a48ec7f013bc
To avoid the stream name collide if there're more than one video track
in one client. If client has multi video tracks, the name of ast_stream
which represents each video track may be the same. Use the MSID:LABEL
here because it's identifiable.
ASTERISK-28196 #close
Reported-by: xiemchen
Change-Id: Ib62b2886e8d3a30e481d94616b0ceaeab68a870b
When a reliable transport is shutdown it's possible for the pjsip registrar
resource shutdown handler to get called multiple times. If this happens and one
of the threads is taking "too long" (slow database call for instance) then the
others get blocked waiting to delete.
Since it only takes one to delete the contact then the other threads should be
able to continue on if one of the threads is currently "deleting". This patch
makes it so now when a thread enters the shutdown handler it checks to see if a
thread is currently already "deleting". If so, then the thread does not attempt
to get the lock, and instead continues on thus avoiding the blockage.
ASTERISK-28213 #close
Change-Id: I7563ca596312b1dff4f3ab41483e89fe2862328a
The transport management code that checks for idle connections keeps a
reference to PJSIP's transport for IDLE_TIMEOUT milliseconds (32000 by
default). Because of this, if the transport is closed before this
timeout, the idle checking code will keep the transport from actually
being shutdown until the timeout expires.
Rather than passing the AO2 object to the scheduler task, we just pass
its key and look it up when it is time to potentially close the idle
connection. The other transport management code handles cleaning up
everything else for us.
Additionally, because we use the address of the transport when
generating its name, we concatenate an incrementing ID to the end of the
name to guarantee uniqueness.
Related to ASTERISK~28231
Change-Id: I02ee9f4073b6abca9169d30c47aa69b5e8ae9afb
Previously both AMI and ARI used a default route on
their stasis message router to handle some of the
messages for publishing out their respective
connection. This caused messages to be given to
their subscription that could not be formatted
into AMI or JSON.
This change adds an API call to the stasis message
router which allows a default route to be set as well
as formatters that the default route is expecting.
This allows both AMI and ARI to specify that their
default route only wants messages of their given
formatter. By doing so stasis can more intelligently
filter at publishing time so that they do not receive
messages which will not be turned into AMI or JSON.
ASTERISK-28244
Change-Id: I65272819a53ce99f869181d1d370da559a7d1703
This ensures that Asterisk responds properly to frames received from a
client with opcode 8 (CLOSE) by echoing back the status code in its own
CLOSE frame.
Handling of the CLOSE opcode is moved up with the rest of the opcodes so
that unmasking gets applied. The payload is no longer returned to the
caller, but neither ARI nor the chan_sip nor pjsip made use of the
payload, which is a good thing since it was masked.
ASTERISK-28231 #close
Change-Id: Icb1b60205fc77ee970ddc91d1f545671781344cf
When --enable-dev-mode is used, pjsip_tpmgr_receive_packet() will assert
if passed a payload length of 0, so treat empty frames as if we didn't
receive them.
Change-Id: I9c5fdccd89cc8d2f3ed7e3ee405ef0fc78178f48
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
For video streams it was possible for the abs-send-time information
to be placed into RTP streams even if not negotiated. Depending on
the endpoint in use this could cause video to not flow.
We now only enable abs-send-time for negotiation if WebRTC is enabled.
ASTERISK-28230
Change-Id: I0eb682302f8da3a4ea3c42e839208d55f825ed0c
The remote side may start a new stream when renegotiating RTP.
Need to reset the DTMF last sequence number and the timestamp
of the last END packet on RTP renegotiation.
If the new time stamp is lower then the timestamp of the last DTMF END packet
the asterisk drops all DTMF frames as out of order.
This bug was caught using Cisco ip-phone SPA5XX and codec g722.
On SIP session update the SPA50X resets stream and a new timestamp is twice
smaller then the previous.
ASTERISK-28162 #close
Change-Id: Ic72b4497e74d801b27a635559c1cf29c16c95254
