https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r54066 | russell | 2007-02-12 11:58:43 -0600 (Mon, 12 Feb 2007) | 4 lines
- Add the ability to register a callback to monitor state changes in an
asynchronous dial operation.
- Rename the various references to "status" to "state" in the dial API
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@54067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r53810 | russell | 2007-02-09 18:35:09 -0600 (Fri, 09 Feb 2007) | 24 lines
Merge team/russell/sla_rewrite
This is a completely new implementation of the SLA functionality introduced in
Asterisk 1.4. It is now functional and ready for testing. However, I will be
adding some additional features over the next week, as well.
For information on how to set this up, see configs/sla.conf.sample
and doc/sla.txt.
In addition to the changes in app_meetme.c for the SLA implementation itself,
this merge brings in various other changes:
chan_sip:
- Add the ability to indicate HOLD state in NOTIFY messages.
- Queue HOLD and UNHOLD control frames even if the channel is not bridged to
another channel.
linkedlists.h:
- Add support for rwlock based linked lists.
dial.c:
- Add the ability to run ast_dial_start() without a reference channel to
inherit information from.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@53817 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52997 | russell | 2007-01-30 17:23:24 -0600 (Tue, 30 Jan 2007) | 5 lines
When we are checking for a system installed version of libgsm, we need to check
for gsm.h as well. Furthermore, when checking for this header, it may be
located in a gsm/ sub directory, so check for that, as well.
(issue #8773)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r52494 | jdixon | 2007-01-28 22:18:36 -0600 (Sun, 28 Jan 2007) | 4 lines
Fixed problem with jitterbuf, whereas it would not complain about, and
would allow itself to be overfilled (per the max_jitterbuf parameter). Now
it rejects any data over and above that size, and complains about it.
........
r52506 | russell | 2007-01-29 10:54:27 -0600 (Mon, 29 Jan 2007) | 5 lines
Clean up a few things in the last commit to the adaptive jitterbuffer code.
- Specifically indicate to the compiler that the "dropem" variable only
needs one but.
- Change formatting to conform to coding guidelines.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@52522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r51311 | russell | 2007-01-19 11:49:38 -0600 (Fri, 19 Jan 2007) | 23 lines
Merge the changes from the /team/group/vldtmf_fixup branch.
The main bug being addressed here is a problem introduced when two SIP
channels using SIP INFO dtmf have their media directly bridged. So, when a
DTMF END frame comes into Asterisk from an incoming INFO message, Asterisk
would try to emulate a digit of some length by first sending a DTMF BEGIN
frame and sending a DTMF END later timed off of incoming audio. However,
since there was no audio coming in, the DTMF_END was never generated. This
caused DTMF based features to no longer work.
To fix this, the core now knows when a channel doesn't care about DTMF BEGIN
frames (such as a SIP channel sending INFO dtmf). If this is the case, then
Asterisk will not emulate a digit of some length, and will instead just pass
through the single DTMF END event.
Channel drivers also now get passed the length of the digit to their digit_end
callback. This improves SIP INFO support even further by enabling us to put
the real digit duration in the INFO message instead of a hard coded 250ms.
Also, for an incoming INFO message, the duration is read from the frame and
passed into the core instead of just getting ignored.
(issue #8597, maybe others...)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_INLINE_API() is a macro that takes a block of code as an argument.
Using preprocessor #directives in the argument is not supported by all
compilers, and it is a bit of an obfuscation anyways, so avoid it.
As a workaround, define a macro that produces either its argument
or nothing, and use that instead of #ifdef/#endif within the
argument to AST_INLINE_API().
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
place, rather than repeating the check on every single file.
Changes to the individual files are coming.
The header file name has been suggested by kevin.
Approved by: kpfleming
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@51290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50867 | kpfleming | 2007-01-15 09:03:06 -0600 (Mon, 15 Jan 2007) | 2 lines
use the ACX_PTHREAD macro from the Autoconf macro archive for setting up compiler pthreads support... should improve portability to platforms with unusual pthreads requirements
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r50466 | file | 2007-01-11 00:19:39 -0500 (Thu, 11 Jan 2007) | 2 lines
Add support to see whether NAT was detected (yay symmetric RTP) and also add a check in chan_sip so that if NAT has been detected and the reinvite behind nat option has been turned off, then just do partial bridge. (issue #8655 reported by mnicholson)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@50467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
previously set are erroneously still set (Bug 6701). After discussion,
it was determined this should only be changed in trunk.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49801 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r49102 | kpfleming | 2007-01-01 17:34:35 -0600 (Mon, 01 Jan 2007) | 2 lines
check specifically for VLDTMF and transcoding support in the system's Zaptel installation, and make only the modules that need those features dependent on them (this will allow building the other Zaptel-using parts of Asterisk against older versions of Zaptel or those on other platforms that haven't caught up yet to the Linux version)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@49103 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48998 | kpfleming | 2006-12-27 15:08:30 -0600 (Wed, 27 Dec 2006) | 3 lines
move extern declaration for this option to a header file where it belongs
provide an initial value for 'languageprefix' option, instead of relying on randomness to provide a useful value
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48999 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48964 | file | 2006-12-25 23:31:58 -0500 (Mon, 25 Dec 2006) | 2 lines
Add an API call that initializes an RTP structure. We need this because chan_sip is cheeky and uses a temporary RTP structure for codec purposes, and the API calls that are used rely on the lock. (Pointed out on asterisk-dev by Andy Wang)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
defined in indications.h to ind_tone_zone_sound and ind_tone_zone,
to avoid conflicts with the structs with the same names
defined in tonezone.h
Hope i haven't missed any instance.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48958 65c4cc65-6c06-0410-ace0-fbb531ad65f3
this, implementing locking of this list to make it thread-safe.
- Add a "redirect" option to http.conf that allows redirecting one URI to
another. I was inspired to do this while playing with the Asterisk GUI. I
got tired of typing this URL to get to the GUI:
http://localhost:8088/asterisk/static/config/cfgadvanced.html
So, now I have the following line in http.conf:
redirect=/=/asterisk/static/config/cfgadvanced.html
Now, I can type the following into my browser and go to the GUI:
http://localhost:8088
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48930 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I don't know when the bug was introduced, but with the typical usage
c->fin = FRAMECOUNT_INC(c->fin)
the frame counters stay to 0.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48568 65c4cc65-6c06-0410-ace0-fbb531ad65f3
http://bugs.digium.com/view.php?id=8602
(i am not sure if there is still missing cast in
front of the alloca() call - being a macro this is
probably triggered only when actually used).
Add function ast_str_reset() to reinitialize the
string to an empty string instead of playing with
the internal fields.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r48521 | kpfleming | 2006-12-16 14:12:41 -0600 (Sat, 16 Dec 2006) | 2 lines
since we really, really have to have autoconfig.h included before all other headers (especially system headers), the Makefile will now force it to happen (this will fix build problems with files like ast_expr2f.c, where we can't control the inclusion order in the file itself)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@48522 65c4cc65-6c06-0410-ace0-fbb531ad65f3
