https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309251 | tilghman | 2011-03-01 19:06:02 -0600 (Tue, 01 Mar 2011) | 7 lines
Revert previous 2 commits, and instead conditionally redefine the same macro used in flex 2.5.35 that clashed with our workaround.
Not surprisingly, the workaround was exactly the same code as was provided by
the Flex maintainers, albeit in two different places, in different macros.
This should fix the FreeBSD builds, which have an older version of Flex.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Starting with Asterisk v1.8, the DAHDI channel name format was changed for
ISDN calls to: DAHDI/i<span>/<number>[:<subaddress>]-<sequence-number>
There were several reasons that the channel name had to change.
1) Call completion requires a device state for ISDN phones. The generic
device state uses the channel name.
2) Calls do not necessarily have B channels. Calls placed on hold by an
ISDN phone do not have B channels.
3) The B channel a call initially requests may not be the B channel the
call ultimately uses. Changes to the internal implementation of the
Asterisk master channel list caused deadlock problems for chan_dahdi if it
needed to change the channel name. Chan_dahdi no longer changes the
channel name.
4) DTMF attended transfers now work with ISDN phones because the channel
name is "dialable" like the chan_sip channel names.
For various reasons, some people need to know which B channel a DAHDI call
is using.
* Added CHANNEL(dahdi_span), CHANNEL(dahdi_channel), and
CHANNEL(dahdi_type) so the dialplan can determine the B channel currently
in use by the channel. Use CHANNEL(no_media_path) to determine if the
channel even has a B channel.
* Added AMI event DAHDIChannel to associate a DAHDI channel with an
Asterisk channel so AMI applications can passively determine the B channel
currently in use. Calls with "no-media" as the DAHDIChannel do not have
an associated B channel. No-media calls are either on hold or
call-waiting.
(closes issue #17683)
Reported by: mrwho
Tested by: rmudgett
(closes issue #18603)
Reported by: arjankroon
Patches:
issue17683_18603_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: stever28, rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r309255 | qwell | 2011-03-02 13:53:47 -0600 (Wed, 02 Mar 2011) | 8 lines
Fix usage of "hasvoicemail=yes" and "mailbox=" in users.conf for SIP.
Since it's a duplicate, nothing is going to be done, so delme doesn't need to
be set at all. Strangely, when this was added, this was being set to 1 in 1.6,
and 0 in trunk.
(issue AST-439)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@309256 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Call path
sip_set_rtp_peer (locks chan then pvt)
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper (locks p->owner)
But by the time p->owner lock was attempted, seems as though chan and p->owner were different.
So in sip_set_rtp_peer, lock pvt first then lock p->owner using deadlocking methods.
(closes issue #18837)
Reported by: alecdavis
Patches:
bug18837-trunk.diff3.txt uploaded by alecdavis (license 585)
Tested by: alecdavis, Irontec, ZX81, cmaj
Review: [https://reviewboard.asterisk.org/r/1126/]
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@308945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk does not send a response if we try to subscribe for call
completion after we have received a 180 Ringing. You can only subscribe
for call completion when the call has been cleared.
When we receive the 180 Ringing, for this call, its call-completion state
is 'CC_AVAILABLE'. If we then send a subscribe message to Asterisk, it
trys to change the call-completion state to 'CC_CALLER_REQUESTED'.
Because this is an invalid state change, it just ignores the message. The
only state Asterisk will accept our subscribe message is in the
'CC_CALLER_OFFERED' state.
Asterisk will go into the 'CC_CALLER_OFFERED' when the SIP client clears
the call by sending a CANCEL.
Asterisk should always send a response. Even if its a negative one.
The fix is to allow for the CCSS core to notify a CC agent that a failure
has occurred when CC is requested. The "ack" callback is replaced with a
"respond" callback. The "respond" callback has a parameter indicating
either a successful response or a specific type of failure that may need
to be communicated to the requester.
(closes issue #18336)
Reported by: GeorgeKonopacki
Tested by: mmichelson, rmudgett
JIRA SWP-2633
(closes issue #18337)
Reported by: GeorgeKonopacki
Tested by: mmichelson
JIRA SWP-2634
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@307879 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306618 | twilson | 2011-02-07 13:59:54 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306617 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306617 | twilson | 2011-02-07 13:51:43 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't allow a REFER w/replaces to replace its own dialog
Asterisk currently accepts a REFER with a Refer-To with an embedded Replaces
header that matches the dialog of the REFER. This would be a situation like A
calls B, A calls C, A transfers B to A, which is just silly. This patch makes
the transfer fail instead of making Asterisk freak out and forget to hang other
channels up.
Review: https://reviewboard.asterisk.org/r/1093/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Once again a call to pbx_builtin_getvar_helper (and pbx_builtin_setvar_helper)
has caused locking problems. Both of these functions lock the channel when
the channel argument is passed in!
In this case, the suspected problem (the backtrace makes it impossible to tell)
was the private being locked in sip_set_rtp_peer and then:
transmit_reinvite_with_sdp
try_suggested_sip_codec
pbx_builtin_getvar_helper
(Traced to verify that the fix was only required in 1.8 and later.)
(closes issue #18491)
Reported by: cmaj
Patches:
chan_sip_fix_deadlocks_bug_18491.txt uploaded by cmaj (license 830)
Tested by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306215 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306126 | twilson | 2011-02-03 12:56:00 -0800 (Thu, 03 Feb 2011) | 16 lines
Merged revisions 306119 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306119 | twilson | 2011-02-03 12:36:34 -0800 (Thu, 03 Feb 2011) | 9 lines
Set hangup cause in local_hangup
When a call involves a local channel (like SIP -> Local -> SIP), the hangup
cause was not being set. This resulted in SIP channels sometimes getting a
503 error instead of a 486 when the far side sent a busy. In Asterisk 1.8+
this also can cause issues with CCSS that involve a local channel. This patch
sets the hangupcause for one side of the local channel to the other in
local_hangup for outbound calls.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@305923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305253 | qwell | 2011-01-31 16:59:34 -0600 (Mon, 31 Jan 2011) | 17 lines
Merged revisions 305252 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305252 | qwell | 2011-01-31 16:56:54 -0600 (Mon, 31 Jan 2011) | 10 lines
Prevent a crash when dialing a technology with no destination (ex: Dial(SIP/))
chan_iax2 and other channel drivers already had code to prevent this. The
attempt that app_dial was making to prevent it was not correct, so I fixed that.
(closes issue #18371)
Reported by: gbour
Patches:
18371.patch uploaded by gbour (license 1162)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@305254 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303960 | twilson | 2011-01-25 16:02:42 -0600 (Tue, 25 Jan 2011) | 23 lines
Merged revisions 303906 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303906 | twilson | 2011-01-25 14:50:59 -0600 (Tue, 25 Jan 2011) | 16 lines
Guard against retransmitting BYEs indefinitely
In the case of an attended transfer (A calls B, A atxfers to C) where
A becomes unreachable before replying to Asterisk's BYE, Asterisk can
sometimes retransmit the BYE indefinitely. This is because
__sip_autodestruct tests p->refer && !ast_test_flag(&p->flags[0],
SIP_ALREADYGONE and will then transmit a BYE. When this BYE times out,
it will not ever be marked as ALREADYGONE, so when __sip_autodestruct
is called again, we end up starting the cycle over.
This patch adds a call to sip_alreadygone(pkt->owner) in retrans_pkt
in the case of a BYE that has timed out. This should prevent Asterisk
from trying to transmit new BYE messages in the future.
Review: https://reviewboard.asterisk.org/r/1077/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303769 | rmudgett | 2011-01-25 11:42:42 -0600 (Tue, 25 Jan 2011) | 47 lines
Merged revisions 303765 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303765 | rmudgett | 2011-01-25 11:36:50 -0600 (Tue, 25 Jan 2011) | 40 lines
Sending out unnecessary PROCEEDING messages breaks overlap dialing.
Issue #16789 was a good idea. Unfortunately, it breaks overlap dialing
through Asterisk. There is not enough information available at this point
to know if dialing is complete. The ast_exists_extension(),
ast_matchmore_extension(), and ast_canmatch_extension() calls are not
adequate to detect a dial through extension pattern of "_9!".
Workaround is to use the dialplan Proceeding() application early in
non-dial through extensions.
* Effectively revert issue #16789.
* Allow outgoing overlap dialing to hear dialtone and other early media.
A PROGRESS "inband-information is now available" message is now sent after
the SETUP_ACKNOWLEDGE message for non-digital calls. An
AST_CONTROL_PROGRESS is now generated for incoming SETUP_ACKNOWLEDGE
messages for non-digital calls.
* Handling of the AST_CONTROL_CONGESTION in chan_dahdi/sig_pri was
inconsistent with the cause codes.
* Added better protection from sending out of sequence messages by
combining several flags into a single enum value representing call
progress level.
* Added diagnostic messages for deferred overlap digits handling corner
cases.
(closes issue #17085)
Reported by: shawkris
(closes issue #18509)
Reported by: wimpy
Patches:
issue18509_early_media_v1.8_v3.patch uploaded by rmudgett (license 664)
Expanded upon issue18509_early_media_v1.8_v3.patch to include analog
and SS7 because of backporting requirements.
Tested by: wimpy, rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303771 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303285 | qwell | 2011-01-21 15:48:09 -0600 (Fri, 21 Jan 2011) | 15 lines
Merged revisions 303284 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303284 | qwell | 2011-01-21 15:45:34 -0600 (Fri, 21 Jan 2011) | 8 lines
Reset configuration before parsing users.conf.
Some values configured in chan_dahdi.conf were able to leak in to users.conf
configuration. This was surprising users, and potentially setting non-sane
"defaults".
ASTNOW-125
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303467 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303285 | qwell | 2011-01-21 15:48:09 -0600 (Fri, 21 Jan 2011) | 15 lines
Merged revisions 303284 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303284 | qwell | 2011-01-21 15:45:34 -0600 (Fri, 21 Jan 2011) | 8 lines
Reset configuration before parsing users.conf.
Some values configured in chan_dahdi.conf were able to leak in to users.conf
configuration. This was surprising users, and potentially setting non-sane
"defaults".
ASTNOW-125
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303286 65c4cc65-6c06-0410-ace0-fbb531ad65f3
We were passing and storing the requested format as an int instead of format_t
resulting in truncation.
(closes issue #18238)
Reported by: whizemen
Patches:
0018238_speex16.patch uploaded by whizemen (license 1143)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@302412 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The sig_pri_new_ast_channel() is called with the channel private lock held
when pri_dchannel() calls it and no channel private lock held when
dahdi_request() calls it. The use of pri_grab() in
sig_pri_new_ast_channel() could leave the channel private lock held when
it returns if the lock was not held before calling it.
Make sig_pri_new_ast_channel() just lock the PRI span lock instead of
using pri_grab(). It is safe to do this because dahdi_request() does not
have the channel private lock and the deadlock potential with the PRI span
lock is only between pri_dchannel() and other threads.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@301946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Two fixes:
1) One must always have the private unlocked before calling
pbx_builtin_setvar_helper to not invalidate locking order since it locks the
channel.
2) Unlock the channel before calling pbx_find_extension, which starts and stops
autoservice during the lookup. The problem scenario as illustrated by the
reporter:
Thread: do_monitor
-----------------------
handle_request_do
handle_incoming
handle_request_refer
ast_parking_ext_valid
pbx_find_extension
ast_autoservice_stop
while (chan_list_state == as_chan_list_state) { usleep(1000); }
Thread: autoservice_run
-----------------------
autoservice_run
chan = ast_waitfor_n
ast_waitfor_nandfds
ast_waitfor_nandfds_classic / simple / complex (depending on your system)
ast_channel_lock(c[x]);
handle_request_do and schedule_process_request_queue locks the owner
if it exists. The autoservice thread is waiting for the channel lock, which
wasn't ever released since the do_monitor thread was waiting for autoservice
operations to complete. Solved by unlocking the channel but keeping a reference
to guarantee safety.
(closes issue #18403)
Reported by: jthurman
Patches:
20110103-blind_deadlock.diff uploaded by jthurman (license 614)
issue18403.patch uploaded by jpeeler (license 325)
Tested by: jthurman
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@301790 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The DAHDI ISDN channel name is not dialable.
Make a channel name like DAHDI/i3/400-12 dialable when the sequence number
is stripped off of the name.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@301134 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r300711 | rmudgett | 2011-01-05 13:43:55 -0600 (Wed, 05 Jan 2011) | 14 lines
A call retrieved from hold may wind up with no audio.
If the retrieved call is natively bridged then the call may not have any
audio path. The following warning message is given:
"Failed to add <dfd> to conference <chan>/<chan>: Invalid argument".
* Open the media on a B channel when pri_fixup_principle() moves the call
from a no_b_channel channel to a real channel.
* Added lock protection while pri_fixup_principle() moves a call from one
private structure to another.
* Made some pri_fixup_principle() messages more meaningful.
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@300714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r300298 | twilson | 2011-01-04 11:37:26 -0600 (Tue, 04 Jan 2011) | 22 lines
Merged revisions 300216 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r300216 | twilson | 2011-01-04 11:11:48 -0600 (Tue, 04 Jan 2011) | 15 lines
Don't authenticate SUBSCRIBE re-transmissions
This only skips authentication on retransmissions that are already
authenticated. A similar method is already used for INVITES. This
is the kind of thing we end up having to do when we don't have a
transaction layer...
(closes issue #18075)
Reported by: mdu113
Patches:
diff.txt uploaded by twilson (license 396)
Tested by: twilson, mdu113
Review: https://reviewboard.asterisk.org/r/1005/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@300301 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_dahdi always inserts a connected party IE when you call from one
dahdi channel to another dahdi channel, even if no such information was
received on the 2nd channel. This clears the display of many phones.
* Removed leftover artifact from before the valid flag was added.
* Updated all of the channel's caller id information with the new
connected line information instead of just the string parts.
(closes issue #18508)
Reported by: wimpy
Patches:
issue18508_trunk.patch uploaded by rmudgett (license 664)
Tested by: wimpy, rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@299405 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r299242 | mnicholson | 2010-12-20 15:25:35 -0600 (Mon, 20 Dec 2010) | 23 lines
Merged revisions 299194,299198,299220 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r299194 | mnicholson | 2010-12-20 14:45:38 -0600 (Mon, 20 Dec 2010) | 6 lines
Respond as soon as possible with a 202 Accepted to refer requests.
This change also plugs a few memory leaks that can occur when parking sip calls.
ABE-2656
........
r299198 | mnicholson | 2010-12-20 15:00:44 -0600 (Mon, 20 Dec 2010) | 2 lines
Remove changes to via processing that were not supposed to go into the last commit.
........
r299220 | mnicholson | 2010-12-20 15:21:39 -0600 (Mon, 20 Dec 2010) | 4 lines
Use ast_free() instead of free()
ABE-2656
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@299353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make sure to allocate a cc_params structure
when creating autopeers.
* Use sip_uri_cmp when retrieving SIP CC agents
and monitors in case parameters appear in the
URI.
(closes issue #18504)
Reported by: kkm
(closes issue #18338)
Reported by: GeorgeKonopacki
Patches:
18338.diff uploaded by mmichelson (license 60)
Tested by: GeorgeKonopacki
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@299248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298194 | rmudgett | 2010-12-13 11:04:41 -0600 (Mon, 13 Dec 2010) | 26 lines
Merged revisions 298193 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298193 | rmudgett | 2010-12-13 10:56:07 -0600 (Mon, 13 Dec 2010) | 19 lines
Outgoing PRI/BRI calls cannot do DTMF triggered transfers.
Outgoing PRI/BRI calls cannot do DTMF triggered transfers if a PROCEEDING
message is not received. The debug output shows that the DTMF begin event
is seen, but the DTMF end event is missing. When the DTMF begin happens,
the call is muted so we now have one way audio (until a DTMF end event is
somehow seen).
* Made set the proceeding flag when the PRI_EVENT_ANSWER event is
received.
* Made absorb the DTMF begin and DTMF end events if we are overlap dialing
and have not seen a PROCEEDING message.
* Added a debug message when absorbing a DTMF event.
JIRA SWP-2690
JIRA ABE-2697
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@298195 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297960 | twilson | 2010-12-09 16:10:31 -0600 (Thu, 09 Dec 2010) | 21 lines
Merged revisions 297959 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297959 | twilson | 2010-12-09 16:00:30 -0600 (Thu, 09 Dec 2010) | 14 lines
Ignore spurious REGISTER requests
If a REGISTER request with a Call-ID matching an existing transaction is received
it was possible that the REGISTER request would overwrite the initreq of the
private structure. This info is used to generate messages for other responses in
the transaction. This patch ignores REGISTER requests that match non-REGISTER
transactions.
(closes issue #18051)
Reported by: eeman
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/1050/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@297965 65c4cc65-6c06-0410-ace0-fbb531ad65f3
