In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch notes that libuuid is now a dependency for res_rtp_asterisk; this
was introduced in between 11.4.0 and 11.5.0 to resolve a dependency for
pjproject, which res_rtp_asterisk uses for ICE/STUN/TURN support.
It also removes a conflicting note from CHANGES. While support for playing
prompts to the first participant was added for app_queue, it was disabled
by default and an option added to enable it. That was properly noted in the
UPGRADE.txt file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@395020 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The original report had to do with a realtime peer behind NAT being pruned and
the peer's private address being used instead of its external address. Upon
debugging, it was discovered that this was being caused by the addition of
the auto_force_rport and auto_comedia settings.
This patch does the following:
* Adds a missing note to the CHANGES file indicating that the default global nat
setting is auto_force_rport
* Constify the 'req' parameter for check_via()
* Add calls to check_via() in a couple of places in order for the auto_*
settings to do their job in attempting to determine if NAT is involved
* Set the flags SIP_NAT_FORCE_RPORT and SIP_PAGE2_SYMMETRICRTP if the auto_*
settings are in use where it was needed
* Moves the copying of peer flags up in build_peer() to before they are used;
this fixes the realtime prune issue
* Update the contrib/realtime schemas to allow the nat column to handle the
different nat setting combinations we have
This patch received a review and "Ship It!" on the issue itself.
(closes issue ASTERISK-20904)
Reported by: JoshE
Tested by: JoshE, Michael L. Young
Patches:
asterisk-20904-nat-auto-and-rt-peersv2.diff Michael L. Young (license 5026)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@382322 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When ringinuse=no queue members can receive more than one call if these
calls happen at nearly the same time.
* Fix so a queue member does not receive more than one call from a queue.
NOTE: This fix does not prevent multiple calls to a member if the member
is in more than one queue.
* Did some refactoring to eliminate some code redundancy.
(issue ASTERISK-16115)
Reported by: nik600
Patches:
jira_asterisk_16115_single_q_v1.8.patch (license #5621) patch uploaded by rmudgett
Modified
* Revert the -r341580 and -r341599 changes adding the queues.conf
check_state_unknown option as it was added in an attempt to fix this
problem. The fix did not need to be optional. The fix should not have
tried to explicitly set the device state. Setting the device state by
something other than the device introduces a race condition. I also could
not see how the change would be effective other than delaying the
app_queue code long enough for the device state to propagate to app_queue.
........
Merged revisions 378663 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 378683 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374386 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sets INUSE when no free agents, NOT_INUSE when an agent is free.
modifes handle_statechange() scan members loop to scan for a free agent
and updates the Queue:queuename_avial devstate.
Previously exited early if the member was found in the queue.
Now Exits later when both a member was found, and a free agent was found.
alecdavis (license 585)
Reported by: Alec Davis
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/2121/
~~~~
Support all ways a member can be available for 'agent available' hints
Alec's patch in r373188 added the ability to subscribe to a hint for when
Queue members are available. This patch modifies the check that determines
when a Queue member is available by refactoring the availability checks in
num_available_members into a shared function is_member_available. This
should now handle the ringinuse option, as well as device state values
other than AST_DEVICE_NOT_INUSE.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373240 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for hints on a queue. Hints can be added using
the nomenclature 'Queue:name', where name is the name of the queue being
monitored.
This nifty feature was done by Alec Davis.
Review: https://reviewboard.asterisk.org/r/1619
Reported by: Alec Davis
Tested by: alecdavis
patches:
review1619.diff2 by alecdavis (license 585)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@373235 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue ASTERISK-18390)
Reported by: Peter Racz
Patches:
dundi_cli_cache.patch.v2 uploaded by Peter Racz (license #6290)
ASTERISK-18390_dundi_cli_cache_jrose_mods_v2.diff uploaded by Jonathan Rose (license #6182)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370978 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is based on the work done by Olle Johansson on review board.
The idea is that the channel specified in an AMI originate or call
file is typically not connected to the outgoing extension until the
channel has been answered. With this change, an EarlyMedia header can
be specified for AMI originates and an early_media option can
be specified in call files. With this option set, once early media is
received on a channel, it will be connected with the outgoing extension.
(closes issue ASTERISK-18644)
Reported by Olle Johansson
Review: https://reviewboard.asterisk.org/r/1472
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implementation of a dialplan function for checking manager accounts. Right now
it only returns the number of logged in sessions for a manager account, but
other attributes can be added later.
Patch by: Olle Johansson
Review: https://reviewboard.asterisk.org/r/421/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370943 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds named calledgroups/pickupgroups to Asterisk. Named groups are
implemented in parallel to the existing numbered callgroup/pickupgroup
implementation. However, unlike the existing implementation, which is limited
to a maximum of 64 defined groups, the number of defined groups allowed for
named callgroups/pickupgroups is effectively unlimited.
Named groups are configured with the keywords "namedcallgroup" and
"namedpickupgroup". This corresponds to the numbered group definitions of
"callgroup" and "pickupgroup". Note that as the implementation of named groups
coexists with the existing numbered implementation, a defined named group of
"4" does not equate to numbered group 4.
Support for the named groups has been added to the SIP, DAHDI, and mISDN channel
drivers.
Review: https://reviewboard.asterisk.org/r/2043
Uploaded by:
Guenther Kelleter(license #6372)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a patch from kkm from review board.
This is useful for adding headers to REFER requests that
emanate from a Transfer() dialplan application call.
This also fixes some uses of the Referred-by header, removing
an extra set of angle brackets.
I've modified the reporter's original patch to not require
any additions to the sip_refer header and to just remove the
referred_by_name from sip_refer since it is no longer needed
or used.
(closes Issue ASTERISK-17639)
reported by Kirill Katsnelson
Patches:
019059-sip-refer-addheaders-trunk-353549.diff
uploaded by Kirill Katsnelson (license #5845)
Review: https://reviewboard.asterisk.org/r/1159
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370691 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option set, channel variables can be set on
every manager originate. The Variable header can still
be used to set additional channel variables for individual
calls if desired.
This work was completed by Olle Johansson on review board.
I have applied the review feedback and am committing it in
order to get this into trunk before Asterisk 11 is branched.
Review: https://reviewboard.asterisk.org/r/1412
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From corruptor's review board posting:
"I've noticed that we can remove particular extension from context with
dialplan remove extension command but in order to remove all extensions
in the context we should delete them on by one. I've created dialplan
remove context command which uses ast_context_destroy to destroy the
whole context with all extensions. I've created to functions for in
pbx_config.c: handle_cli_dialplan_remove_context which actually removes
context and complete_dialplan_remove_context which completes input.
They are based on other similar functions and pretty trivial but I can be
mistaken somewhere.
"I've also modified dialplan add include <context2> into <context1>. I've
made it similar dialplan add extension ... command. It creates <context1>
if it doesn't exist and I've also modified complete_dialplan_add_include
and removed check for existance of <context2> because we can include
non-existent context into another one. (I usually include empty
(non-existent) contexts in advance). Should we raise warning in this case
as it's raised while reading extensions.conf?
"I use those functions with AMI. I think manager commands should be created
in addition to those CLI commands."
I've addressed the latest comments on review board and have made some other
coding guidelines-related cleanup. I also have modified the CHANGES file to
mention these new commands.
(closes issue ASTERISK-19292)
reported by Andrey Solovyev
Patches:
dialplan_add_include.patch
uploaded by Andrey Solovyev (license #5214)
dialplan_remove_context.patch
uploaded by Andrey Solovyev (license #5214)
Review: https://reviewboard.asterisk.org/r/2042
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows you to specify a port number for the MySQL server.
It's useful if a MySQL server is running on a non-standard port.
Even though this module is deprecated in favor of func_odbc, someone
asked for this feature and it seems pretty harmless to add.
It has been tested using a number of combinations of with/without a
port number specified in the dialplan and changing the port number
for mysqld.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370534 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch was submitted by mnicholson a while back. It adds a new AMI action
which allows users to request SIP peer status on demand similar to existing
PeerStatus events and to the output you would see from CLI with sip show peer
Review: https://reviewboard.asterisk.org/r/1098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch changes the Asterisk configure script and build system to detect
the presence of the NetBSD editline library (libedit) on the system. If it is
found, it will be used in preference to the version included in the Asterisk
source tree.
(closes issue ASTERISK-18725)
Reported by: Jeffrey C. Ollie
Review: https://reviewboard.asterisk.org/r/1528/
Patches:
0001-Allow-linking-building-against-an-external-editline.patch uploaded by jcollie (license #5373) (heavily modified by kpfleming)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370481 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This updates the CHANGES file with things that were committed for
Asterisk 11, but were not noted in that file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds Named ACL functionality to Asterisk. This allows system
administrators to define an ACL and refer to it by a unique name. Configurable
items can then refer to that name when specifying access control lists.
It also includes updates to all core supported consumers of ACLs. That includes
manager, chan_sip, and chan_iax2. This feature is based on the deluxepine-trunk
by Olle E. Johansson and provides a subset of the Named ACL functionality
implemented in that branch. For more information on this feature, see acl.conf
and/or the Asterisk wiki.
Review: https://reviewboard.asterisk.org/r/1978/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369959 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This channel driver is a replacement for both chan_gtalk and chan_jingle but adds additional features not found in either.
These features include full configuration reload, video, full codec support, bidirectional cause code mapping, hold,
unhold, and ringing indication. It is also compliant with the current published Jingle and Google Jingle specifications.
The original Google Talk protocol is also supported for Google Voice interoperability.
You may ask yourself though where the name motif comes from... and I would say to you... music!
motif: a perceivable or salient recurring fragment or succession of notes
Sorta like a jingle!
Review: https://reviewboard.asterisk.org/r/1917/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new CLI command, 'stun show status'. This command will show
a table describing all known STUN servers and statuses.
(closes issue ASTERISK-18046)
Reported by: Jeremy Kister
Tested by: Jeremy Kister
patches:
(stun-show-status-v4-trunk.patch license #6232 uploaded by Jeremy Kister)
Review: https://reviewboard.asterisk.org/r/2001
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369681 65c4cc65-6c06-0410-ace0-fbb531ad65f3
options are documented in config sample
sample config rename to proper name - ooh323.conf
To change media address ooh323 send empty TCS if there was
completed TCS exchange or send facility forwardedelements
with new fast start proposal if not.
Then close transmit logical channels and renew TCS exchange.
If new fast start proposal is received then ooh323 stack call back
channel driver routine to change rtp address in the rtp instance.
If empty TCS is received then close transmit logical channels and
renew TCS exchange
Review: https://reviewboard.asterisk.org/r/1607/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch improves the handling of call id logging significantly with regard
to transfers and adding APIs to better handle specific aspects of logging.
Also, changes have been made to chan_sip in order to better handle the creation
of callids and to enable the monitor thread to bind itself to a particular
call id when a dialog is determined to be related to a callid. It then unbinds
itself before returning to normal monitoring.
review: https://reviewboard.asterisk.org/r/1886/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If enabled using the keepalive option in sip.conf a small packet will be sent
at a regular interval to keep the NAT mapping open. This is lightweight as the
remote side does not need to parse and handle a SIP message.
(closes issue AST-783)
Review: https://reviewboard.asterisk.org/r/1756/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364500 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add two new dialplan functions: FEATURE() and FEATUREMAP(). FEATURE()
lets you set some of the configuration options from the [general] section
of features.conf on a per-channel basis. FEATUREMAP() lets you customize
the key sequence used to activate built-in features, such as blindxfer,
and automon. See the built-in documentation for details.
Review: https://reviewboard.asterisk.org/r/1871/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364437 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk has a setting for the minimum allowed DTMF. If we get shorter
DTMF tones, these will be changed to the minimum on the outbound call
leg.
(closes issue ASTERISK-19772)
Review: https://reviewboard.asterisk.org/r/1882/
Reported by: oej
Tested by: oej
Patches by: oej
Thanks to the reviewers.
1.8 branch for this patch: agave-dtmf-duration-asterisk-conf-1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@363558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ISDN ETSI PTP and Q.SIG (And SS7 in future) have support for reporting who
was the original redirecting party of a call.
* Added support for the original redirecting party and reason to the
REDIRECTING function and the system core as well as to the stubbed
locations in sig_pri.c.
Review: https://reviewboard.asterisk.org/r/1829/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
