and we now have the groupcount system to implement call-limits in the dialplan. You
can use the "setvar" option in realtime/sip.conf to set limits per device.
- Implement "callcounter" as a new option to enable the call counting we need to
report device status to queue, manager and SIP subscriptions.
The call counter setting is now enabled in the code by setting the device call-limit
to 999. When we remove the call limit, we can simply enable this with a boolean
setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89554 65c4cc65-6c06-0410-ace0-fbb531ad65f3
make the format explicit in a debug message;
print the audio instead of aggregated peer capability in a debugging msg.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89532 65c4cc65-6c06-0410-ace0-fbb531ad65f3
with the SIPPEER() argument of the same name. The deprecation procedure is not
being used here since this is a trunk-only option.
(closes issue #11307, reported by pj, patched by me)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this, you can control the peer in the dialplan, so you avoid placing outbound
calls when the device has reached busy-level.
Reported by pj.
Closes bug #11180
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the bug tracker. Since we don't authenticate devices (peers/users) on OPTIONS we don't
have the proper context set for the user/peer.
However, we might not want to process an authentication for every OPTIONS, so we could
have a config option for this, "optionsforceok" to always answer 200 OK on the request
and not check device or destination, nor add a SDP. If Asterisk sends the OPTIONs request,
it doesn't care about the reply. Some devices use OPTIONs to discover capabilities,
since we should answer like an INVITE from the device and we need to support that properly
too, which we don't today.
So much to do :-)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89404 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
solution, it breaks communication.
Rizzo - you need to implement a configuration option for this
code. It's good, but maybe should be off by default.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89285 65c4cc65-6c06-0410-ace0-fbb531ad65f3
way of handling DTMF in SIP. Totally undocumented, but implemented
in enough devices so we have to support it.
Code by sergee, small changes by oej.
Closes issue #11049
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89278 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89119 | mmichelson | 2007-11-08 15:00:08 -0600 (Thu, 08 Nov 2007) | 7 lines
Rework of the commit I made yesterday to use the already built-in
ast_uri_decode function as opposed to my home-rolled one. Also added
comments.
Thanks to oej for pointing me in the right direction
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89099 | file | 2007-11-07 21:28:56 -0400 (Wed, 07 Nov 2007) | 6 lines
Improve the devicestate logic for multiple devices. If any are available then the extension is considered available.
(closes issue #10164)
Reported by: nic_bellamy
Patches:
sip-hinting-svn-branch-1.4.patch uploaded by nic (license 299)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89100 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89097 | file | 2007-11-07 21:11:25 -0400 (Wed, 07 Nov 2007) | 8 lines
Add support for allowing one outgoing transaction. This means if a response comes back out of order chan_sip will still handle it. I dream of a chan_sip with real transaction support.
(closes issue #10946)
Reported by: flefoll
(closes issue #10915)
Reported by: ramonpeek
(closes issue #9567)
Reported by: atca_pres
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89098 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r89090 | mmichelson | 2007-11-07 16:40:35 -0600 (Wed, 07 Nov 2007) | 6 lines
This patch makes it possible for SIP phones to dial extensions defined with '#' characters
in extensions.conf AND maintain their escaped characters when forming URI's
(closes issue #10681, reported by cahen, patched by me, code review by file)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89091 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88768 | russell | 2007-11-05 15:33:56 -0600 (Mon, 05 Nov 2007) | 8 lines
When traversing the list of channel variables here in transmit_invite(), the
asterisk channel must be locked, as this data may change at any time.
(I have seen numerous reports of crashes related to the handling of channel
variables. There are a couple of issues on the bug tracker related to it,
but it has also been noted on IRC and mailing lists. So, I am finding and
fixing some places where channel variables are handled improperly.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
details and examples are in include/asterisk/stringfields.h.
Not applicable to older branches except for 1.4 which will
receive a fix for the routines that free memory pools.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r88328 | file | 2007-11-02 17:20:21 -0300 (Fri, 02 Nov 2007) | 6 lines
If an INFO request within a dialog is received with a content length of 0 simply send back a 200 OK. It is valid to do this and the remote side is probably using it to make sure the signalling is still alive.
(closes issue #5747)
Reported by: chandi
Patches:
infofix-81430-1.patch uploaded by IgorG (license 20)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@88329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r87342 | file | 2007-10-29 14:20:28 -0300 (Mon, 29 Oct 2007) | 6 lines
Fix issue where if both sides of the dialog cancelled the dialog at the same time chan_sip could kepe retransmitting a response for no reason.
(closes issue #9566)
Reported by: atca_pres
Patches:
bug9566.patch uploaded by oej
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@87343 65c4cc65-6c06-0410-ace0-fbb531ad65f3
