Added new global option (regcontext) to pjsip. When set, Asterisk will
dynamically create and destroy a NoOp priority 1 extension
for a given endpoint who registers or unregisters with us.
ASTERISK-25670 #close
Reported-by: Daniel Journo
Change-Id: Ib1530c5b45340625805c057f8ff1fb240a43ea62
The default_from_user retrieval function was pulling the
default_from_user from the global configuration struct in an unsafe way.
If using a database as a backend configuration store, the global
configuration struct is short-lived, so grabbing a pointer from it
results in referencing freed memory.
The fix here is to copy the default_from_user value out of the global
configuration struct.
Thanks go to John Hardin for discovering this problem and proposing the
patch on which this fix is based.
ASTERISK-25390 #close
Reported by Mark Michelson
Change-Id: I6b96067a495c1259da768f4012d44e03e7c6148c
When Asterisk sends an outbound SIP request, if there is no direct
reason to place a specific value for the username in the From header,
Asterisk would generate a UUID. For example, this would happen when
sending outbound OPTIONS requests when qualifying or when sending
outbound INVITE requests when originating (if no explicit caller ID were
provided). The issue is that some SIP providers reject these sorts of
requests with a "Name too long" error response.
This patch aims to fix this by changing the default outbound username in
From headers to "asterisk". This value can be overridden by changing the
default_from_user option in the global options if desired.
ASTERISK-25377 #close
Reported by Mark Michelson
Change-Id: I6a4d34a56ff73ff4f661b0075aeba5461b7f3190
Currently when Asterisk starts initial qualifies of contacts are spread out
randomly between 0 and qualify_timeout to prevent network and system overload.
If a contact's qualify_frequency is 5 minutes however, that contact may be
unavailable to accept calls for the entire 5 minutes after startup. So while
staggering the initial qualifies is a good idea, basing the time on
qualify_timeout could leave contacts unavailable for too long.
This patch adds a new global parameter "max_initial_qualify_time" that sets the
maximum time for the initial qualifies. This way you could make sure that all
your contacts are initialy, randomly qualified within say 30 seconds but still
have the contact's ongoing qualifies at a 5 minute interval.
If max_initial_qualify_time is > 0, the formula is initial_interval =
min(max_initial_interval, qualify_timeout * random(). If not set,
qualify_timeout is used.
The default is "0" (disabled).
ASTERISK-24863 #close
Change-Id: Ib80498aa1ea9923277bef51d6a9015c9c79740f4
Tested-by: George Joseph <george.joseph@fairview5.com>
This patch fixes previously reverted code that caused binary incompatibility
problems with some modules. And like the original patch it makes sure that
no matter what order the endpoint identifier modules were loaded, priority is
given based on the ones specified in the new global 'endpoint_identifier_order'
option.
ASTERISK-24840
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4489/
........
Merged revisions 433028 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@433029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a type=global section is not defined in pjsip.conf the global
defaults are not applied. As a result the mandatory Max-Forwards header
is not added to SIP messages for res_pjsip/chan_pjsip.
The handling of pjsip.conf type=global objects has several problems:
1) If the global object is missing the defaults are not applied.
2) If the global object is missing the default_outbound_endpoint's default
value is not returned by ast_sip_global_default_outbound_endpoint().
3) Defines are needed so default values only need to be changed in one
place.
* Added a sorcery instance observer callback to check if there were any
type=global sections loaded. If there were more than one then issue an
error message. If there were none then apply the global defaults.
* Fixed ast_sip_global_default_outbound_endpoint() to return the
documented default when no type=global object is defined.
* Made defines for the global default values.
* Increased the default_useragent[] size because SVN version strings can
get lengthy and 128 characters may not be enough.
* Fixed an off-nominal code path ref leak in global_alloc() if the string
fields fail to initialize.
* Eliminated RAII_VAR in get_global_cfg() and
ast_sip_global_default_outbound_endpoint().
ASTERISK-24807 #close
Reported by: Anatoli
Review: https://reviewboard.asterisk.org/r/4467/
........
Merged revisions 432766 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It's possible to have a scenario that will create a conflict between endpoint
identifiers. For instance an incoming call could be identified by two different
endpoint identifiers and the one chosen depended upon which identifier module
loaded first. This of course causes problems when, for example, the incoming
call is expected to be identified by username, but instead is identified by ip.
This patch adds a new 'global' option to res_pjsip called
'endpoint_identifier_order'. It is a comma separated list of endpoint
identifier names that specifies the order by which identifiers are processed
and checked.
ASTERISK-24840 #close
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/4455/
........
Merged revisions 432638 from http://svn.asterisk.org/svn/asterisk/branches/13
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@432639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds a module which is configurable using the keep_alive_interval setting in the
global section that will send a CRLF keep alive to all active connection-oriented transports at
the provided interval. This is useful because it can help keep connections open through NATs.
This functionality also exists within PJSIP but can not be controlled at runtime and requires
recompiling it.
Review: https://reviewboard.asterisk.org/r/4084/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@425825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If the global section was not specified in pjsip.conf then the configuration
object does not exist in sorcery so when retrieving "debug" option it would
return NULL. Then the NULL result was passed to ast_false utils function
which would return false because it wasn't set to some representation of
false, thus enabling sip debug logging. Made it so if the global config object
does not exist then it will return a default of "no" for sip debugging.
(issue ASTERISK-23038)
Reported by: Rusty Newton
........
Merged revisions 407442 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407443 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
