* In sip.conf.sample fix sentence where we said that WS or WSS are supported
transports for use in an outbound register definition. They are not
supported in that case.
* In func_cdr.c made it clear that the Disable option for CDR_PROP can be used
to enable CDR on a channel.
ASTERISK-24867 #close
Reported by: Rusty Newton
ASTERISK-24853 #close
Reported by: PSDK
Change-Id: I3d698bc6302b9d00a0a995b5c4ad9a42d69b48ca
This adds an "rtp_keepalive" option for PJSIP endpoints. Similar to the
chan_sip option, this specifies an interval, in seconds, at which we
will send RTP comfort noise frames. This can be useful for keeping RTP
sessions alive as well as keeping NAT associations alive during lulls.
ASTERISK-25242 #close
Reported by Mark Michelson
Change-Id: I3b9903d99e35fe5d0b53ecc46df82c750776bc8d
Misconfiguring sorcery.conf with a 'config' wizard with no extra data
will currently crash Asterisk on startup, as the wizard requires a comma
delineated list to parse. This patch updates res_sorcery_config to check
for the presence of the data before it starts manipulating it.
Change-Id: I4c97512e8258bc82abe190627a9206c28f5d3847
Receipt of an RTP packet currently causes the formats on an PJSIP channel to
change to the format of the RTP packet. In some off-nominal cases it's possible
for this to be a format that has not been configured or negotiated. This change
makes it so only formats explicitly configured on the endpoint are allowed.
ASTERISK-25258 #close
Change-Id: If93d641fb6418a285928839300d7854cab8c1020
In channels/sig_pri.h, struct sig_pri_span, the field
force_restart_unavailable_chans is only defined if
#if defined(HAVE_PRI_MCID) is true.
All other occurences of force_restart_unavailable_chans are outside of the
#if defined(HAVE_PRI_MCID)
endif
scope.
ASTERISK-25257 #close
Reported by: Patric Marschall
Change-Id: I071de89cc2cd0d85927a013036e235851f672549
This patch adds support for push configuration of dynamic, i.e.,
sorcery, objects in Asterisk. It adds three new REST API calls to the
'asterisk' resource:
* GET /asterisk/{configClass}/{objectType}/{id}: retrieve the current
object given its ID. This returns back a list of ConfigTuples, which
define the fields and their present values that make up the object.
* PUT /asterisk/{configClass}/{objectType}/{id}: create or update an
object. A body may be passed with the request that contains fields to
populate in the object. The same format as what is retrieved using
the GET operation is used for the body, save that we specify that the
list of fields to update are contained in the "fields" attribute.
* DELETE /asterisk/{configClass}/{objectType}/{id}: remove a dynamic
object from its backing storage.
Note that the success/failure of these operations is somewhat
configuration dependent, i.e., you must be using a sorcery wizard that
supports the operation in question. If a sorcery wizard does not support
the create or delete mechanisms, then the REST API call will fail with a
403 forbidden.
ASTERISK-25238 #close
Change-Id: I28cd5c7bf6f67f8e9e437ff097f8fd171d30ff5c
Fixes for issues with the ASTERISK-24934 patch.
* Fixed ast_escape_alloc() and ast_escape_c_alloc() if the s parameter is
an empty string. If it were an empty string the functions returned NULL
as if there were a memory allocation failure. This failure caused the AMI
VarSet event to not get posted if the new value was an empty string.
* Fixed dest buffer overwrite potential in ast_escape() and
ast_escape_c(). If the dest buffer size is smaller than the space needed
by the escaped s parameter string then the dest buffer would be written
beyond the end by the nul string terminator. The num parameter was really
the dest buffer size parameter so I renamed it to size.
* Made nul terminate the dest buffer if the source string parameter s was
an empty string in ast_escape() and ast_escape_c().
* Updated ast_escape() and ast_escape_c() doxygen function description
comments to reflect reality.
* Added some more unit test cases to /main/strings/escape to cover the
empty source string issues.
ASTERISK-25255 #close
Reported by: Richard Mudgett
Change-Id: Id77fc704600ebcce81615c1200296f74de254104
setup_park_common_datastore() was assuming that a non-NULL string returned
for the ATTENDEDTRANSFER and BLINDTRANSFER channel variables are not empty
strings. Things got crashy as a result.
* Made setup_park_common_datastore() treat the channel variable values the
same whether they are NULL or empty for ATTENDEDTRANSFER and
BLINDTRANSFER.
ASTERISK-25254 #close
Reported by: Richard Mudgett
Change-Id: I9a9c174b33f354f35f82cc6b7cea8303adbaf9c2
Last time I checked, it's "Sangoma", not "Samgoma". Thanks to Brian
(GameGamer43) for pointing that out.
Change-Id: I43d7b196f6d7a2b2517b84915e3a8dfbc2894106
Changed the unload mode to AST_FORCE_SOFT from AST_FORCE_FIRM,
which would unload a module even if it was in use.
* Changed unload mode to proper mode
ASTERISK-25173
Change-Id: If2402487b5bce05d9770f25f65f5c8e292ad5533
The crash fix for ASTERISK-25183 backported some code from master to try
to make sure that a BYE response is processed by the same serializer used
by the BYE request. The identified race condition causing that backport
was the BYE request code had not finished processing after sending the BYE
before the BYE response came in for processing under a different thread.
Unfortunately, there is still a race condition. Now the race condition is
between destroying the call session's serializer in
ast_taskprocessor_unreference() and using ast_taskprocessor_get() to get a
reference to the serializer for a BYE response. Even worse, the new race
condition is a design limitation of the taskprocessor implementation that
didn't matter in versions before v12. Back then, taskprocessors were only
destroyed when a module unloaded. Now res_pjsip can destroy them when a
call ends.
However, as noted on the ASTERISK-25183 commit,
session_inv_on_state_changed() is disassociating the dialog from the
session when the invite dialog state becomes PJSIP_INV_STATE_DISCONNECTED.
This is a tad too soon because our BYE request transaction has not
completed yet.
* Split session_end() that is called by session_inv_on_state_changed() to
hold off session destruction until the BYE transaction timeout occurs or a
failed initial INVITE transaction timeout occurs in
session_inv_on_tsx_state_changed().
ASTERISK-25201 #close
Reported by: Matt Jordan
Change-Id: Iaf8dc8485fd8392a2a3ee4ad3b7f7f04a0dcc961
An http request can be sent to reload an Asterisk module. If the
module can not be reloaded or is not already loaded, an error
response will be returned.
The command "curl -v -u user:pass -X PUT 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, based
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be reloaded through http requests
ASTERISK-25173
Change-Id: I289188bcae182b2083bdbd9ebfffd50b62f58ae1
An http request can be sent to unload an Asterisk module. If the
module can not be unloaded or is already unloaded, an error response
will be returned.
The command "curl -v -u user:pass -X DELETE 'http://localhost:8088
/ari/asterisk/modules/{moduleName}'" (or something similar, depending
on configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be unloaded through http requests
ASTERISK-25173
Change-Id: I535a95f5676deb02651522761ecbdc0b00b5ac57
An http request can be sent to load an Asterisk module. If the
module can not be loaded or is loaded already, an error response
will be returned.
The command curl -v -u user:pass -X POST 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Asterisk modules can be loaded through http requests
ASTERISK-25173
Change-Id: I9e05d5b8c5c666ecfef341504f9edc1aa84fda33
An http request can be sent to retrieve information on a single
module, including the resource name, description, use count, status,
and support level.
The command "curl -v -u user:pass -X GET 'http://localhost:8088/ari
/asterisk/modules/{moduleName}'" (or something similar, depending on
configuration) can be run in the terminal to access this new
functionality.
For more information, see:
https://wiki.asterisk.org/wiki.display/~bford/Asterisk+ARI+Resource
* Added new ARI functionality
* Information on a single module can now be retrieved
ASTERISK-25173
Change-Id: Ibce5a94e70ecdf4e90329cf0ba66c33a62d37463
During an attended transfer a thread is started that handles imparting the
bridge channel. From the start of the thread to when the bridge channel is
ready exists a gap that can potentially cause problems (for instance, the
channel being swapped is hung up before the replacement channel enters the
bridge thus stopping the transfer). This patch adds a condition that waits
for the impart thread to get to a point of acceptable readiness before
allowing the initiating thread to continue.
ASTERISK-24782
Reported by: John Bigelow
Change-Id: I08fe33a2560da924e676df55b181e46fca604577
This patch adds five CLI commands for the media cache:
* 'media cache show all' - display a summary of all items in the media
cache.
* 'media cache show <uri>' - display detailed information about a
single item in the media cache.
* 'media cache delete <uri>' - remove an item from the media cache, and
inform the bucket backend for the URI scheme to remove the item as
well.
* 'media cache refresh <uri>' - refresh a URI. If the item does not
exist in the media cache, the bucket backend will pull down the media
associated with the URI and create the item in the cache.
* 'media cache create <uri>' - create an item in the media cache from
some local media storage. Note that the bucket backend for the URI
scheme must still permit the item creation.
Change-Id: Id1c5707a3b8e2d96b56e4691a46a936cd171f4ae
This patch adds a new API to the Asterisk core that acts as a media
cache. The core API itself is mostly a thin wrapper around some bucket
API provided implementation that itself acts as the mechanism of
retrieval for media. The media cache API in the core provides the
following:
* A very thin in-memory cache of the active bucket_file items. Unlike a
more traditional cache, it provides no expiration mechanisms. Most
queries that hit the in-memory cache will also call into the bucket
implementations as well. The bucket implementations are responsible
for determining whether or not the active record is active and valid.
This makes sense for the most likely implementation of a media cache
backend, i.e., HTTP. The HTTP layer itself is the actual arbiter of
whether or not a record is truly active; as such, the in-memory cache
in the core has to defer to it.
* The ability to create new items in the media cache from local
resources. This allows for re-creation of items in the cache on
restart.
* Synchronization of items in the media cache to the AstDB. This
also includes various pieces of important metadata.
The API provides sufficient access that higher level APIs, such as the
file or app APIs, do not have to worry about the semantics of the bucket
APIs when needing to playback a resource.
In addition, this patch provides unit tests for the media cache API. The
unit tests use a fake bucket backend to verify correctness.
Change-Id: I11227abbf14d8929eeb140ddd101dd5c3820391e
This patch adds a new function to the bucket API for ast_bucket_file
objects, ast_bucket_file_metadata_callback. It will call ao2_callback on
the ast_bucket_file's ao2_container of metadata, calling the provided
ao2_callback_fn callback on each piece of metadata associated with the
file.
This is particularly useful when a bucket backend has added metadata,
and a higher level API wants to be aware of/access said metadata,
without knowing for sure what the key is.
Change-Id: I96f6757717f47b650df91a437f7df16406227466
Some individual fields may fail their conversion due to their default
values being invalid for their custom handlers. In particular,
configuration values that depend on others being enabled (and thus have
an empty default value) are notorious for tripping this routine up. An
example of this are any of the DTLS options for endpoints. Any of the
DTLS options will fail to be applied (as DTLS is not enabled), causing
the entire object set to be aborted.
This patch makes it so that we log a debug message when skipping a
field, and rumble on anyway.
ASTERISK-25238
Change-Id: I0bea13de79f66bf9f9ae6ece0e94a2dc1c026a76
We have a strange relationship between the parsing of format
capabilities from a string and their representation as a string. We
expect the format capabilities to be expressed as a string in the
following format:
allow = !all,ulaw,alaw
disallow = g722
While we would generate the string representation of those formats as:
allow = (ulaw|alaw)
disallow = (ulaw|alaw|g729...)
When the configuration framework needs to store values as a string, it
generates the format capabilities using the second representation; this
representation however cannot be parsed when the entry is rehydrated.
This patch fixes that by updating
ast_format_cap_update_by_allow_disallow to parse an entry as if it were
in the generated format if it has a leading '(' and a trailing ')'.
ASTERISK-25238
Change-Id: I904d43caf4cf45af06f6aee0c9e58556eb91d6ca
Having a debug message tell us that we attempted to look up an item but
failed is nice in circumstances when it isn't clear if the wizard was
queried correctly or not.
Change-Id: I2600c3bbea87f252196358f62e73f4c7da8632f7
