There was no real reason to limit the conteny type to text/plain other
than that's what it was limited to before. Now any text/* content
type will be allowed for channel drivers that don't support enhanced
messaging and any type will be allowed for channel drivers that do
support enhanced messaging.
Change-Id: I94a90cfee98b4bc8e22aa5c0b6afb7b862f979d9
When an AMI client connects, it cannot determine if a user was talking
prior to a transition in the user speaking state (which would generate
a ConfbridgeTalking event). This patch causes app_confbridge to track the
talking state and make this state available via ConfBridgeList.
ASTERISK-27877 #close
Change-Id: I19b5284f34966c3fda94f5b99a7e40e6b89767c6
The MeetmeJoin, MeetmeLeave, MeetmeEnd, MeetmeMute, MeetmeTalking, and
MeetmeTalkRequest AMI events were documented with sending out a Usernum
header when the User header was actually output.
* Change the online documentation to match reality.
ASTERISK-27873
ASTERISK-25261
Change-Id: I437bc70618d07c183c9624b7069c2fcae7f17a39
Fix data-type mismatch between app_voicemail and database columns
exposed by new version of MariaDB
ASTERISK-27760
Change-Id: I8543ad480a08c98be78bde1ee870e6e6c84b2c5b
Correct the log warning message shown when ODBC voicemail
retrieve_file is called and there is a null value in the category
column.
A more meaningfull message is now written at debug level.
ASTERISK-27853
Change-Id: Ic36e97d5eb070a23a12ba45972f6b53e2182a3f4
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Use AST_PBX_MAX_STACK to escape if we recurse 128 times. This will
prevent crash if dialplan contains an include loop. Log an error when
this occurs, at most one message per call to Macro() so we avoid logger
spam.
ASTERISK-26570 #close
Change-Id: I6c71b76998c31434391b150de055ae9a531e31da
Fixes a bug on the "confbridge show profile bridge" cli command
that showed "video_mode=no video" when video_mode was set
to "sfu"
ASTERISK-27418 #close
Change-Id: I481e3172c7f872664c7ac7809879d541c9f031e9
This change adds the ability for multiple REMB reports in
bridge_softmix to be combined according to a configured
behavior into a single report. This single report is sent
back to the sender of video, which adjusts the encoding bitrate
to be at or below the bitrate of the report. The available
behaviors are: lowest, highest, and average. Lowest uses the
lowest received bitrate. Highest uses the highest received
bitrate. Average goes through the received bitrates adding
them to the previous average and creates a new average.
Other behaviors can be added in the future and the existing
average one may be adjusted, but this provides the foundation
to do so.
Support for configuring which behavior to use has been
added to app_confbridge.
ASTERISK-27804
Change-Id: I9eafe4e7c1f72d67074a8d6acb26bfcf19322b66
SendText now accepts new channel variables that can be used
to override the To and From display names and set the Content-Type
of a message. Since you can now set Content-Type, other text/*
content types are now valid.
Change-Id: I648b4574478119f95de09d9f08e9595831b02830
This change adds a configuration option to app_confbridge which can be
used to set the interval at which we will send a combined REMB (remote
estimated maximum bitrate) frame to sources of video. The bridging API
has also been extended slightly to allow setting this so bridge_softmix
can use it.
ASTERISK-27786
Change-Id: I0e49eae60f369c86434414f3cb8278709c793c82
Add an option to make app_originate not wait for the created channel
to answer.
Change-Id: I7fc2facd77079abc6321f44e8bcd4e39298de2ae
Requested-by: Frederic Steinfels <fst@highdefinition.ch>
Signed-off-by: Russell Bryant <russell@russellbryant.net>
Asterisk does not need the development package of libltdl, because it does not
use any symbol of -lltdl directly. Instead, it uses the runtime package via the
shared library -lodbc. On the supported platforms, that shared library declares
its dependency on -lltdl correctly, otherwise AST_EXT_LIB_CHECK would have
failed.
ASTERISK-27745
Change-Id: Icd315809b8e7978203431f3afb66240dd3a040ba
Certain applications (e.g. door-phone) require that also video is transmitted
before a call is accepted.
Change-Id: I9842e1dc2f6e1c2c49dc33fe615255007d2f821e
When app_voicemail calls ast_test_suite_notify with the results of
a user keypress, it formats the keypress as '%c'. If the user hung up
or some other error occurrs, the result of the keypress is a non
printable character. This ultimately causes json_vpack_ex to think
it's being passed a non utf-8 string and return an error.
* Keypress results passed to ast_test_suite_notify are now checked with
isprint() and a '?' is substituted if the check fails.
Change-Id: I78ee188916bbac840f3d03f40201b692347ea865
* acl (named_acl.c)
* cdr
* cel
* ccss
* dnsmgr
* dsp
* enum
* extconfig (config.c)
* features
* http
* indications
* logger
* manager
* plc
* sounds
* udptl
These modules are now loaded at appropriate time by the module loader.
Unlike loadable modules these use AST_MODULE_LOAD_FAILURE on error so
the module loader will abort startup on failure of these modules.
Some of these modules are still initialized or shutdown from outside the
module loader. logger.c is initialized very early and shutdown very
late, manager.c is initialized by the module loader but is shutdown by
the Asterisk core (too much uses it without holding references).
Change-Id: I371a9a45064f20026c492623ea8062d02a1ab97f
The menuselect comment was updated to deprecate these modules but the
AST_MODULE_INFO block at the end of file was missed.
ASTERISK-27671
Change-Id: I63070b5c4d4f08af010c6034acd4793c1bcef839
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
astosp.h is leftover from when logic was split between app_osplookup and
res_osp. All logic was moved into app_osplookup by 109737eb1c in 2006,
but astosp.h remained. This moves the remaining defines into
app_osplookup and deletes astosp.h.
Change-Id: I0a6c4debd7c9543b608520b1765abfa4fab7b2fd
Between Asterisk 11 and Asterisk 13 there was a significant increase
in the number of AST_FRAME_NULL frames being processed by app_amd.c's
main loop. Each AST_FRAME_NULL frame was being counted as 100ms
towards the total time and silence. This may have been accurate
when app_amd.c was orginally added, but it is not in Asterisk 13.
As such the total analysis time and silence calculations were way
off effectively breaking app_amd.c
* Additional debug messages were added
* AST_FRAME_NULL are now ignored
ASTERISK-27610
Change-Id: I18aca01af98f87c1e168e6ae0d85c136d1df5ea9
* app_fax (replaced by res_fax).
* res_config_sqlite (replaced by res_config_sqlite3).
* res_monitor (replaced by app_mixmonitor).
This is related to ASTERISK~23657 but does not resolve that ticket.
Resolving that ticket would require complete removal of res_monitor.
ASTERISK-27671 #close
Change-Id: I16a3edd61fc1abd4a7b2e9357693ed663f62dd49
* Made the AMI ConfbridgeList action's ConfbridgeList events output all
the standard channel snapshot headers instead of a few hand-coded channel
snapshot headers. The benefit is that the CallerIDName gets disruptive
characters like CR, LF, Tab, and a few others escaped. However, an empty
CallerIDName is now output as "<unknown>" instead of "<no name>".
ASTERISK-27651
Change-Id: Iaf7d54a9d40194c2db060bc9b4979fab6720d977
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
This removes references that are no longer needed due to automatic
references created by module dependencies.
In addition this removes most calls to ast_module_check as they were
checking modules which are listed as dependencies.
Change-Id: I332a6e8383d4c72c8e89d988a184ab8320c4872e
I've audited all modules that include any header which includes
asterisk/optional_api.h. All modules which use OPTIONAL_API now declare
those dependencies in AST_MODULE_INFO using requires or optional_modules
as appropriate.
In addition ARI dependency declarations have been reworked. Instead of
declaring additional required modules in res/ari/resource_*.c we now add
them to an optional array "requiresModules" in api-docs for each module.
This allows the AST_MODULE_INFO dependencies to include those missing
modules.
Change-Id: Ia0c70571f5566784f63605e78e1ceccb4f79c606
This patch adds the ability to configure a prompt which will be read
to the "winner" who pressed 1 (or the configured value) and received
the call.
ASTERISK-24372 #close
Change-Id: I6ec1c6c883347f7d1e1f597189544993c8d65272
* Declare 'requires' and 'enhances' text fields on module info structure.
* Rename 'nonoptreq' to 'optional_modules'.
* Update doxygen comments.
Still need to investigate dependencies among modules I cannot compile.
Change-Id: I3ad9547a0a6442409ff4e352a6d897bef2cc04bf
The check for last_user == NULL needs to happen before we dereference
the variable, previously it was possible for us to check flags of a NULL
last_user.
Change-Id: I274f737aa8af9d2d53e4a78cdd7ad57561003945
