Some endpoints do not like a stream being reused for a new
media stream. The frame/jitterbuffer can rely on underlying
attributes of the media stream in order to order the packets.
When a new stream takes its place without any notice the
buffer can get confused and the media ends up getting dropped.
This change uses the SSRC change to determine that a new source
is reusing an existing stream and then bridge_softmix renegotiates
each participant such that they see a new media stream. This
causes the frame/jitterbuffer to start fresh and work as expected.
ASTERISK-27277
Change-Id: I30ccbdba16ca073d7f31e0e59ab778c153afae07
chan_pjsip_indicate was missing a case for the recently added
AST_CONTROL_STREAM_TOPOLOGY_CHANGED condition and was returning an
error and causing the call to be hung up instead of just ignoring
it.
ASTERISK-27260
Reported by: Daniel Heckl
Change-Id: I4fecbb00a0b8a853da85155065c1a6bddf235e80
Provide a way to get the contents of the the Request URI from the initial SIP
INVITE in dial plan function call. (In this case "${CHANNEL(ruri)}")
ASTERISK-27278
Reported by: David J. Pryke
Tested by: David J. Pryke
Change-Id: I1dd4d6988eed1b6c98a9701e0e833a15ef0dac3e
Multicast/Unicast RTP do not use SDP so we need to use a format that
cleanly maps to one of the static RTP payload types. Without this
change, an Originate to a Multicast or Unicast channel without a format
specified would produce no audio on the receiving device.
ASTERISK-21399 #close
Reported by: Tzafrir Cohen
Change-Id: I97e332b566e85da04b0004b9b0daae746cfca0e3
In handle_request_invite, when processing a pickup, a call
is made to get_sip_pvt_from_replaces to locate the pvt for
the subscription. The pvt is assumed to be valid when zero
is returned indicating no error, and is dereferenced which
can cause a crash if it was not found.
This change checks the not found case and returns -1 which
allows the calling code to fail appropriately.
ASTERISK-27217 #close
Reported-by: Bryan Walters
Change-Id: I6bee92b8b8b85fcac3fd66f8c00ab18bc1765612
If directmedia=yes is configured, when call is answered, Asterisk sends reINVITE
to both parties to set up media path directly between the endpoints.
In this reINVITE msg SDP origin line (o=) contains IP address of endpoint
instead of IP of asterisk. This behavior violates RFC3264, sec 8:
"When issuing an offer that modifies the session,
the "o=" line of the new SDP MUST be identical to that in the
previous SDP, except that the version in the origin field MUST
increment by one from the previous SDP."
This patch assures IP address of Asterisk is always sent in
SDP origin line.
ASTERISK-17540
Reported by: saghul
Change-Id: I533a047490c43dcff32eeca8378b2ba02345b64e
When rtp_keepalive is on for a PJSIP endpoint dialing to another
Asterisk instance also using PJSIP, Asterisk will continue to print
warning messages about not being able to send frames of a certain
type. This suppresses that warning message.
Change-Id: I0332a05519d7bda9cacfa26d433909ff1909be67
Create local_tag and remote_tag in CHANNEL info to get tag from From and
To headers of a SIP dialog.
ASTERISK-27220
Change-Id: I59b16c4b928896fcbde02ad88f0e98922b15d524
If an SDP answer hasn't been sent yet, it's legal to change it.
This is required for PJSIP_DTMF_MODE to work correctly, and can
also have use in the future for updating codecs too.
ASTERISK-27209 #close
Change-Id: Idbbfb7cb3f72fbd96c94d10d93540f69bd51e7a1
Introduce a new property to rtp-engine to make it aware of
the desire for assymetric codecs or not. If asymmetric codecs
is not allowed, the bridge will compare read/write formats
and shut down the p2p bridge if needed
ASTERISK-26745 #close
Change-Id: I0d9c83e5356df81661e58d40a8db565833501a6f
This adds a way to access information passed along with SIP headers in
a REFER message that initiates a transfer. Headers matching a dialplan
variable GET_TRANSFERRER_DATA in the transferrer channel are added to
a HASH object TRANSFER_DATA to be accessed with functions HASHKEY and HASH.
The variable GET_TRANSFERRER_DATA is interpreted to be a prefix for
headers that should be put into the hash. If not set, no headers are
included. If set to a string (perhaps 'X-' in a typical case), all headers
starting this string are added. Empty string matches all headers.
If there are multiple of the same header, only the latest occurrence in
the REFER message is available in the hash.
Obviously, the variable GET_TRANSFERRER_DATA must be inherited by the
referrer channel, and should be set with the '_' or '__' prefix.
I avoided a specific reference to SIP or REFER, as in my mind the mechanism
can be generalized to other channel techs.
ASTERISK-27162
Change-Id: I73d7a1e95981693bc59aa0d5093c074b555f708e
* chan_sip: channel in test_sip_rtpqos_1.
* test_config: config hook, config info and global config holder.
* test_core_format: format in format_attribute_set_without_interface.
* test_stream: unneeded frame duplication.
* test_taskprocessor: task_data.
Change-Id: I94d364d195cf3b3b5de2bf3ad565343275c7ad31
Syntax: SIP_HEADERS([prefix])
If the argument is specified, only the headers matching the given prefix
are returned.
The function returns a comma-separated list of SIP header names from an
incoming INVITE message. Multiple headers with the same name are included
in the list only once. The returned list can be iterated over using the
functions POP() and SIP_HEADER().
For example, '${SIP_HEADERS(Co)}' might return the string
'Contact,Content-Length,Content-Type'.
Practical use is rather '${SIP_HEADERS(X-)}' to enumerate optional
extended headers sent by a peer.
ASTERISK-27163
Change-Id: I2076d3893d03a2f82429f393b5b46db6cf68a267
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
This function is a replica of SIPDtmfMode, allowing the DTMF mode of a
PJSIP call to be modified on a per-call basis
ASTERISK-27085 #close
Change-Id: I20eef5da3e5d1d3e58b304416bc79683f87e7612
On every reload of chan_iax2 module, MWI subscription was added, which
results in additional taskprocessors being accumulated over time.
This commit fixes it by making sure we check for existing subscription
first.
This was verified with 'core show taskprocessors' CLI command.
ASTERISK-27122 #close
Change-Id: Ie2ef528fd5ca01b933eeb88188cc10967899cfb9
This patch creates a new configuration option called "webrtc". When enabled it
defaults and enables the following options that are needed in order for webrtc
to work in Asterisk:
rtcp-mux, use_avpf, ice_support, and use_received_transport=enabled
media_encryption=dtls
dtls_verify=fingerprint
dtls_setup=actpass
When "webrtc" is enabled, this patch also parses the "msid" media level
attribute from an SDP. It will also appropriately add it onto the outgoing
session when applicable.
Lastly, when "webrtc" is enabled h264 RTCP FIR feedback frames are now sent.
ASTERISK-27119 #close
Change-Id: I5ec02e07c5d5b9ad86a34fdf31bf2f9da9aac6fd
BUNDLE is a specification used in WebRTC to allow multiple
streams to use the same underlying transport. This reduces
the number of ICE and DTLS negotiations that has to occur
to 1 normally.
This change implements this by adding support for it to
the RTP SDP module in PJSIP. BUNDLE can be turned on using
the "bundle" option and on an offer we will offer to
bundle streams together. On an answer we will accept any
bundle groups provided. Once accepted each stream is bundled
to another RTP instance for transport.
For the res_rtp_asterisk changes the ability to bundle
an RTP instance to another based on the SSRC received
from the remote side has been added. For outgoing traffic
if an RTP instance is bundled to another we will use the
other RTP instance for any transport related things. For
incoming traffic received from the transport instance we
look up the correct instance based on the SSRC and use it
for any non-transport related data.
ASTERISK-27118
Change-Id: I96c0920b9f9aca7382256484765a239017973c11
This API was not actively maintained, was not added to new modules
(such as res_pjsip), and there exist better alternatives to acquire the
same information, such as the ARI.
Change-Id: I4b2185a83aeb74798b4ad43ff8f89f971096aa83
When sip.conf contained tcpenable=yes and autodomain=yes, the TCP domain was
added in any case, because of a local Boolean-negation error of the return value
of ast_sockaddr_cmp. After fixing this error for TCP and TLS, the TLS domain was
still always added with tlsenable=yes, because the domains were not compared
just on the address but also on the port – and TLS is always on a different port
than UDP/TCP.
ASTERISK-27106
Change-Id: I14fe9e319e238320b094016980445ef3a5b3337c
Because of a copy-and-paste error when the struct ast_sockaddr changed,
tlsbindaddr was not added, when sip.conf contained autodomain=yes; see
"show sip domains" on the command-line interface (CLI) of Asterisk.
ASTERISK-27106
Change-Id: I3d0957150017c223136968ef1266f275d0d6695e
When connected_line_method is "invite", we're supposed to determine
if the client can support UPDATE and if it can, send UPDATE instead
of INVITE to avoid the SDP renegotiation. Not only was pjproject
not setting the PJSIP_INV_SUPPORT_UPDATE flag, we were testing
that invite_tsx wasn't NULL which isn't always the case.
* Updated chan_pjsip/update_connected_line_information to drop the
requirement that invite_tsx isn't NULL.
* Submitted patch to pjproject sip_inv.c that sets the
PJSIP_INV_SUPPORT_UPDATE flag correctly.
* Updated pjsip.conf.sample to clarify what happens when "invite"
is specified.
ASTERISK-27095
Change-Id: Ic2381b3567b8052c616d96fbe79564c530e81560
The existing auto dtmf mode reverts to inband if 4733 fails to be
negotiated. This patch adds a new mode auto_info which will
switch to INFO instead of inband if 4733 is not available.
ASTERISK-27066 #close
Change-Id: Id185b11e84afd9191a2f269e8443019047765e91
The stream topology (list of streams and order) is now stored with the
configured PJSIP endpoints and used during the negotiation process.
Media negotiation state information has been changed to be stored
in a separate object. Two of these objects exist at any one time
on a session. The active media state information is what was previously
negotiated and the pending media state information is what the
media state will become if negotiation succeeds. Streams and other
state information is stored in this object using the index (or
position) of each individual stream for easy lookup.
The ability for a media type handler to specify a callback for
writing has been added as well as the ability to add file
descriptors with a callback which is invoked when data is available
to be read on them. This allows media logic to live outside of
the chan_pjsip module.
Direct media has been changed so that only the first audio and
video stream are directly connected. In the future once the RTP
engine glue API has been updated to know about streams each individual
stream can be directly connected as appropriate.
Media negotiation itself will currently answer all the provided streams
on an offer within configured limits and on an offer will use the
topology created as a result of the disallow/allow codec lines.
If a stream has been removed or declined we will now mark it as such
within the resulting SDP.
Applications can now also request that the stream topology change.
If we are told to do so we will limit any provided formats to the ones
configured on the endpoint and send a re-invite with the new topology.
Two new configuration options have also been added to PJSIP endpoints:
max_audio_streams: determines the maximum number of audio streams to
offer/accept from an endpoint. Defaults to 1.
max_video_streams: determines the maximum number of video streams to
offer/accept from an endpoint. Defaults to 1.
ASTERISK-27076
Change-Id: I8afd8dd2eb538806a39b887af0abd046266e14c7
The construction of the returned string assumed incorrectly that the
supplied buffer would always be initialized as an empty string. If it is
not an empty string we could overrun the supplied buffer by the length of
the non-empty buffer string plus one. It is also theoreticaly possible
for the supplied buffer to be overrun by a string terminator during a read
operation even if the supplied buffer is an empty string.
* Fix the assumption that the supplied buffer would already be an empty
string. The buffer is not guaranteed to contain an empty string by all
possible callers.
* Fix string terminator buffer overrun potential.
Change-Id: If6a0806806527678c8554b1dcb34fd7808aa95c9
The chan_pjsip module uses a calculation approach for
determining device state. This means that in situations
where we would expect device state to change we need to
tell the core to query. A scenario that was missed is
when early media was signaled.
This change adds the notification for the core to
query device state when we are told that early media
is being provided.
ASTERISK-27039
Change-Id: Iafebfd152894966344ff2e950a3cee9f59a3eb6f
PJSIP support in Asterisk differs from chan_sip in that it
allows media to be sent as-is without transcoding provided
the codecs were negotiated in the SDP. This is allowed
according to the RFC. Support for this differs quite a lot
though and some endpoints do not handle it well.
This change extends the 'asymmetric_rtp_codec' option to
also cover this case. When set to no (the default) the code
behaves as chan_sip does - the best codec is selected and
we will only ever send that, unless we change what we are
sending if the remote side changes. When set to yes we
will send media as-is without transcoding if the codec
has been negotiated in the SDP.
ASTERISK-26996
Change-Id: Ib1647f6902a0843e8c435946f831c2159e8d1d51
This introduces the ability for PJSIP code to specify filtering flags
when retrieving PJSIP contacts. The first flag for use causes the
query code to only retrieve contacts that are not unreachable. This
change has been leveraged by both the Dial() process and the
PJSIP_DIAL_CONTACTS dialplan function so they will now only attempt
calls to contacts which are not unreachable.
ASTERISK-26281
Change-Id: I8233b4faa21ba3db114f5a42e946e4b191446f6c
If we are offered or are offering RTCP-MUX, don't consider RTCP ICE
candidates. This confuses certain browsers (current Firefox for
example) and causes intial audio setup delays.
ASTERISK-26982 #close
Change-Id: Ifeaf47e83972fe8dbe58b7fb3d6d1823400cfb91
The while(1) loop in skinny_session wasn't checking for EOF so
a packet that was longer than a header but still truncated
would spin the while loop infinitely. Not only does this
permanently tie up a thread and drive a core to 100% utilization,
the call of ast_log() in such a tight loop eats all available
process memory.
Added poll with timeout to top of read loop
ASTERISK-26940 #close
Reported-by: Sandro Gauci
Change-Id: I2ce65f3c5cb24b4943a9f75b64d545a1e2cd2898
