Currently, when using res_srtp, once the SRTP policy has been added to the
current session the policy is locked into place. Any attempt to replace an
existing policy, which would be needed if the remote endpoint negotiated a new
cryptographic key, is instead rejected in res_srtp. This happens in particular
in transfer scenarios, where the endpoint that Asterisk is communicating with
changes but uses the same RTP session.
This patch modifies res_srtp to allow remote and local policies to be reloaded
in the underlying SRTP library. From the perspective of users of the SRTP API,
the only change is that the adding of remote and local policies are now added
in a single method call, whereas they previously were added separately. This
was changed to account for the differences in handling remote and local
policies in libsrtp.
Review: https://reviewboard.asterisk.org/r/1741/
(closes issue ASTERISK-19253)
Reported by: Thomas Arimont
Tested by: Thomas Arimont
Patches:
srtp_renew_keys_2012_02_22.diff uploaded by Matt Jordan (license 6283)
(with some small modifications for this check-in)
........
Merged revisions 356604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356605 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Custom parking extensions may not be coded such that the first and only
extension priority is the Park application. These custom parking
extensions will not be recognized as parking extensions. When a call is
blind transferred to an extension that is not recognized as a parking
extension, the normal blind transfer code causes the transferred channel
to start executing dialplan. Calls that get parked in this manner do not
know the original channel name that parked the call so the original parker
could never be called back if the parked call is not retrieved before the
timeout time. The parking space is also announced to the call being
parked as a side effect of not knowing the original parking channel.
* Fix handling of BLINDTRANSFER channel variable for call parking.
* Fixed SIP blind transfer using the wrong dialplan context variable to
check for the parking extension.
(closes issue ASTERISK-19322)
Reported by: aragon
Tested by: rmudgett, jparker
Review: https://reviewboard.asterisk.org/r/1730/
JIRA AST-766
........
Merged revisions 356521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356522 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When we send an ACK for a 2xx response to an INVITE, we are supposed
to use the learned route set. However, when we receive a non-2xx final
response to an INVITE, we are supposed to send the ACK to the same place
we initially sent the INVITE.
We had been doing this up until the changes went in that would build a route
set from provisional responses. That introduced a regression where we would
use the learned route set under all circumstances.
With this change, we now will set the destination of our ACK based on the
invitestate. If it is INV_COMPLETED then that means that we have received
a non-2xx final response (INV_TERMINATED indicates a 2xx response was received).
If it is INV_CANCELLED, then that means the call is being canceled, which
means that we should be ACKing a 487 response.
The other change introduced here is setting the invitestate to INV_CONFIRMED
when we send an ACK *after* the reqprep instead of before. This way, we can
tell in reqprep more easily what the invitestate is prior to sending the ACK.
(closes issue ASTERISK-19389)
reported by Karsten Wemheuer
patches:
ASTERISK-19389v2.patch uploaded by Mark Michelson (license #5049)
(with some slight modifications prior to commit)
........
Merged revisions 356475 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 356476 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r356215 | mjordan | 2012-02-22 08:53:53 -0600 (Wed, 22 Feb 2012) | 32 lines
Merged revisions 356214 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r356214 | mjordan | 2012-02-22 08:50:20 -0600 (Wed, 22 Feb 2012) | 27 lines
Fix potential buffer overrun and memory leak when executing "sip show peers"
The "sip show peers" command uses a fix sized array to sort the current peers
in the peers ao2_container. The size of the array is based on the current
number of peers in the container. However, once the size of the array is
determined, the number of peers in the container can change, as the peers
container is not locked. This could cause a buffer overrun when populating
the array, if peers were added to the container after the array was created.
Additionally, a memory leak of the allocated array would occur if a user
caused the _show_peers method to return CLI_SHOWUSAGE.
We now create a snapshot of the current peers using an ao2_callback with the
OBJ_MULTIPLE flag. This size of the array is set to the number of peers
that the iterator will iterate over; hence, if peers are added or removed
from the peers container it will not affect the execution of the "sip show
peers" command.
Review: https://reviewboard.asterisk.org/r/1738/
(closes issue ASTERISK-19231)
(closes issue ASTERISK-19361)
Reported by: Thomas Arimont, Jamuel Starkey
Tested by: Thomas Arimont, Jamuel Starkey
Patches: sip_show_peers_2012_02_16.diff uploaded by mjordan (license 6283)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@356216 65c4cc65-6c06-0410-ace0-fbb531ad65f3
IAX2 uses the trunkfreq variable to determine how often to send trunk packets, but
this value is in milliseconds while ast_timer_set_rate() expects the rate argument
to be ticks per second. So we divide 1000 by trunkfreq and pass that in instead.
With a default of 20ms, this change makes IAX2 send trunk packets every 20ms
instead of every 50ms.
Tracked down by myself and Bob Wienholt.
........
Merged revisions 355746 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355747 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes two main issues:
1. Asterisk would send a CANCEL to the route created by the provisional response
instead of using the same destination it did in the initial INVITE.
2. If a new route set arrives in a 200 OK than was in the 1XX response (perfectly
possible if our outbound INVITE gets forked), then the route set in the 200 OK
needs to overwrite the route set in the 1XX response.
(closes issue ASTERISK-19358)
Reported by: Karsten Wemheuer
Tested by: Karsten Wemheuer
patches:
ASTERISK-19358.patch uploaded by Mark Michelson (license 5049)
ASTERISK-19358.patch uploaded by Stefan Schmidt (license 6034)
Review: https://reviewboard.asterisk.org/r/1749
........
Merged revisions 355732 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 355733 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@355745 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the auto_force_rport and auto_comedia NAT options. It
also converts the nat= setting to a list of comma-separated combinable
options: no, force_rport, comedia, auto_force_rport, and auto_comedia.
nat=yes remains as an undocumented option equal to
"force_rport,comedia". The first instance of 'yes' or 'no' in the list
stops parsing and overrides any previously set options. If an auto_*
option is specified with its non-auto_ counterpart, the auto setting
takes precedence.
This patch builds upon the patch posted to ASTERISK-17860 by JIRA user
pedro-garcia.
(closes issue ASTERISK-17860)
Review: https://reviewboard.asterisk.org/r/1698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-18924, SIP INFO DTMF handlingw as changed to account for both
lowercase alphatbetic DTMF events, as well as uppercase alphabetic DTMF
events. When this occurred, the comparison of the character buffer containing
the event code was changed such that the buffer was first compared again '0'
and '9' to determine if it was numeric. Unfortunately, since the first
character in the buffer will typically be '1' in the case of non-numeric
event codes (10-16), this caused those codes to be converted to a DTMF event
of '1'. This patch fixes that, and cleans up handling of both
application/dtmf-relay and application/dtmf content types.
Review: https://reviewboard.asterisk.org/r/1722/
(closes issue ASTERISK-19290)
Reported by: Ira Emus
Tested by: mjordan
........
Merged revisions 354542 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 354543 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is based on the one by David Vossel, developer extrodinaire, at
https://reviewboard.asterisk.org/r/344/. If multiple peers are defined with the
same host/port, but differing callbackextensions, it chooses the peer with the
matching callbackextension. Since callbackextension creates an outbound
registration with the callbackextension as the Contact address, matching an
incoming request by that (in addition to the host/port) makes a lot of sense.
This patch also adds support for callbackextension to realtime by querying all
peers with callbackextensions on reload and adding registrations for them.
(closes issue ASTERISK-13456)
Review: https://reviewboard.asterisk.org/r/344/
Review: https://reviewboard.asterisk.org/r/1717/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354458 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This changes the debuglevel of 'pri set debug' to a bit mask allowing the user
to independently select bits of output:
1 libpri internals including state machine
2 Decoded Q.931 messages
4 Decoded Q.921 headers
8 raw hex dump of the full frames
Additionally, this ensures that the meaning of "on" does not change and
intrudces intense and hex to simplify usage.
(closes issue ASTERISK-17159)
Original-patch-by: wimpy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@354165 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After R340970 Asterisk was still polling the RTCP file descriptor after RTCP is
shut down and removed. If the descriptor happened to have data ready when the
removal occured then Asterisk would go into an infinite loop trying to read
data that it can never actually access. This change disables the audio RTCP
file descriptor for the duration of the T.38 transaction.
(closes issue ASTERISK-18951)
Reported-by: Kristijan Vrban
........
Merged revisions 353915 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353916 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This feature also causes the sending complete ie to be sent for switch
types that do not automatically send the ie. (EuroISDN/ETSI)
The main difference between dialing Dial(DAHDI/g0/1234w888) and
Dial(DAHDI/g0/1234,,D(888)) is the sending of the sending complete ie.
(closes issue ASTERISK-19176)
Reported by: rmudgett
Tested by: rmudgett
........
Merged revisions 353867 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353868 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A previous patch I committed from ASTERISK-16930 unexpectedly changed some output for
the AMI action "sippeers" which this patch changes back. Also, this aligns the output
for the cli command "sip show peers" and fixes another issue that patch introduced by
using ast_sockaddr_stringify calls multiple times without immediately using the pointer.
I also went ahead and did a little janitorial work to clean up whitespace in
_sip_show_peers.
(issue ASTERISK-16930)
(closes issue ASTERISK-19281)
Reported by: Patrick El Youssef
Patches:
ASTERISK-19281.diff uploaded by Walter Doekes (license 5674)
........
Merged revisions 353769 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353771 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353772 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are a number of cleaner looking wrappers for ast_sockaddr_stringify_fmt
available which are slightly more readable than using a direct call to
ast_sockaddr_stringify_fmt. This patch switches a number of those calls in
chan_sip to use those wrappers and is generally harmless.
(Closes issue ASTERISK-16930)
Reported by: Michael L. Young
Patches:
chan_sip-broken-registration-1.8.diff uploaded by Michael L. Young (license 5026)
........
Merged revisions 353720 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353721 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353725 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's dnsmgr currently takes a pointer to an ast_sockaddr and updates it
anytime an address resolves to something different. There are a couple of
issues with this. First, the ast_sockaddr is usually the address of an
ast_sockaddr inside a refcounted struct and we never bump the refcount of those
structs when using dnsmgr. This makes it possible that a refresh could happen
after the destructor for that object is called (despite ast_dnsmgr_release
being called in that destructor). Second, the module using dnsmgr cannot be
aware of an address changing without polling for it in the code. If an action
needs to be taken on address update (like re-linking a SIP peer in the
peers_by_ip table), then polling for this change negates many of the benefits
of having dnsmgr in the first place.
This patch adds a function to the dnsmgr API that calls an update callback
instead of blindly updating the address itself. It also moves calls to
ast_dnsmgr_release outside of the destructor functions and into cleanup
functions that are called when we no longer need the objects and increments the
refcount of the objects using dnsmgr since those objects are stored on the
ast_dnsmgr_entry struct. A helper function for returning the proper default SIP
port (non-tls vs tls) is also added and used.
This patch also incorporates changes from a patch posted by Timo Teräs to
ASTERISK-19106 for related dnsmgr issues.
(closes issue ASTERISK-19106)
Review: https://reviewboard.asterisk.org/r/1691/
........
Merged revisions 353371 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353397 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r353321 | alecdavis | 2012-01-31 11:16:22 +1300 (Tue, 31 Jan 2012) | 25 lines
Merged revisions 353320 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r353320 | alecdavis | 2012-01-31 10:57:49 +1300 (Tue, 31 Jan 2012) | 18 lines
RFC3261 Section 8.1.1.5. The sequence number value MUST be expressible as a 32-bit unsigned integer
* fix: use %u instead of %d when dealing with CSeq numbers - to remove possibility of -ve numbers.
* fix: change all uses of seqno and friends (ocseq icseq) from 'int' or 'unsigned int' to uint32_t.
Summary of CSeq numbers.
An initial CSeq number must be less than 2^31
A CSeq number can increase in value up to 2^32-1
An incrementing CSeq number must not wrap around to 0.
Tested with Asterisk 1.8.8.2 with Grandstream phones.
alecdavis (license 585)
Tested by: alecdavis
Review: https://reviewboard.asterisk.org/r/1699/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, if an m-line in an SDP offer or answer had a port number of zero,
that line was skipped, and resulted in an 'Unsupported SDP media type...'
warning message. This was misleading, as the media type was not unsupported,
but was ignored because the m-line indicated that the media stream had been
rejected (in an answer) or was not going to be used (in an offer).
........
Merged revisions 353260 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 353261 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353262 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes up softkey endcall. Previous code was a copy of onhook, now
allows for endcall softkey to be used while device is still onhook.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@353224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
