There seems to be a race condition between starting the asterisk
daemon and attempting to use 'asterisk -r' that can cause the
control socket file to not be created. Since all of the Jenkins
slaves have 'expect' installed, the runUnittests script can use
it to start asterisk in the forground and issue the commands
interactively. This is much more reliable and it can also make
startup errors more visible since they'll be in the Jenkins console
output.
If 'expect' isn't installed, the original daemon/asterisk -r
process is used.
Also added a "core show settings" before running the tests
and added "notice,warning,error" to the console log.
Change-Id: Idd656085f854afede813ac241b9e312b31358160
Task processors are retrieved using a 'get or create' pattern. The
singleton container was unlocked between the get and create steps so
it's possible that two threads could create task processors with the
same name at the same time.
Change-Id: Id64fae94a6a1e940ddf38fde622dcd4391635382
We previously allowed resample and g711 codecs to be built when
TEST_FRAMEWORK was enabled. This could cause errors if the testsuite
was run without this option enabled. Switch the build system to allow
those codecs to be built when --enable-dev-mode is used. This removes a
chance for strange testsuite errors from use of an inadequate pjsua
binary.
Change-Id: Iee8a3613cdb711fa7e7d217c5a775a575907ae22
PJSIP assumes that these header names are not allocated, does not clone
the name strings when reusing headers.
Block unload of res_pjsip_caller_id until shutdown to ensure static
memory stays valid. It was previously unsafe to unload while any
sessions are active.
Change-Id: I190854dea943d6e441cf03733f8a0da661aea27f
The presence of Record-Route in re-invites is optional, thus it is
important to make sure the dialog doesn't have a routset before
rewriting the contact header.
ASTERISK-28129 #close
Change-Id: Ic8ceb54ccfc93f7e315e476c514a2c777f2da7dc
We cannot use need_el_end and SIGURG when restarting. Instead we need
to run el_end within the SIGHUP restartnow handler.
ASTERISK-28158
Change-Id: Ia852276363c81bdcf1aa29eb4558c5c2fa1218a0
When dn_expand was being called on SRV and NAPTR results, the
return value was being used to calculate the size of the buffer
needed to store the host names. Since dn_expand returns the
length of the COMPRESSED name the buffer could be too short
to hold the EXPANDED name. The expanded name is NULL terminated
so using strlen() is the correct way to determine the length
actually needed for the buffer.
ASTERISK-28127
Reported by: Jan Hoffmann
patches:
patch.diff submitted by janhoffmann (license 6986)
Change-Id: I4d35d6c431c6c6836cb61d37b1378cc47f0b414d
It's possible for a 4th task to be spawned before we cancel. This
results in a write to the already freed test_data1. Wait long enough to
verify success of the cancelation before freeing test_data1.
Change-Id: I057e2fcbe97f8a175e50890be89c28c20490a20f
Merge storage for the stats object and name string into the main
allocation for struct ast_taskprocessor.
Change-Id: I74fe9a7f357f0e6d63152f163cf5eef6428218e1
* Ignore console=yes configuration option in remote console processes.
* Use new flag to tell consolethread to run el_end and exit when needed.
ASTERISK-28158
Change-Id: I9e23b31d4211417ddc88c6bbfd83ea4c9f3e5438
pack_string crashed on non-NULL strings returned when s->has_error was
true if the string was the result of 's' format without '#', '%' or '+'.
Change-Id: Ic125df691d81ba2cbc413e37bdae657b304d20d0
If multiple [globals] sections are used (for example via separate
included files), only the first one is processed. This can result in
lost global variables when using a modular extensions.conf.
ASTERISK-28146 #close
Change-Id: Iaac810c0a7c4d9b1bf8989fcc041cdb910ef08a0
When Asterisk's taskprocessors get overloaded we need to reduce the work
load. res_pjsip currently ignores new SIP requests and relies on SIP
retransmissions in the hope that the overload condition will clear soon
enough to handle the retransmitted SIP request.
This change adds the following code after ast_taskprocessor_alert_get()
has returned TRUE:
1- identifies transport type. If non-udp then send a 503 response
2- if transport type is udp/udp6 then ignore, as before.
Change-Id: I1c230b40d43a254ea0f226b7acf9ee480a5d3836
The use of a '|' in the "global/debug" synopsis documentation caused the
generated html table on the wiki to add an extra column that included the
text after the pipe.
This patch replaces the pipe with a comma.
ASTERISK-28150
Change-Id: I3d79a6ca6d733d9cb290e779438114884b98a719
The current round-robin method does not take the current taskprocessor
load into consideration when distributing requests. Using the least-size
method the request goes to the taskprocessor that is servicing the least
number of active tasks at the current time.
Longer running tasks with the round-robin method can delay processing
tasks.
* Change the algorithm from round-robin to least-size for picking the
PJSIP taskprocessor from the default serializer pool.
Change-Id: I7b8d8cc2c2490494f579374b6af0a4868e3a37cd
As mentioned in the comment I've added in the code there is no
ability to unsubscribe all subscribers from a topic and explicitly
destroy it. This is not currently a problem as we have two types of
topics:
Long lived topics which exist for the lifetime of the system.
Ephemeral topics which feed a long lived topic.
In the case of the ephemeral topics there is no subscriber which does
not have its lifetime managed by the same entity that has created
the topic. This ensures that when the topic is being unreferenced the
subscribers are also unsubscribed and destroyed, allowing the topic
to ultimately be destroyed as well.
Change-Id: Ic5e244da7b16b1895ba1fc5ece481ebba5809c9a
When a call pickup is performed using and invite with replaces header
the ast_do_pickup method is attempted and a PICKUP stasis message is sent.
ASTERISK-28081 #close
Reported-by: Luit van Drongelen
Change-Id: Ieb1442027a3ce6ae55faca47bc095e53972f947a
Using the --quiet or -q option in conjonction with /dev/stdout as the output
file allow the output to be used as a valid configuration.
Given a script that generates a valid sip.conf I can pipe the output of that
script into `sip_to_pjsip.py -q /dev/stdin /dev/stdout`. This allow me to use
that piped command in my pjsip.conf using the `exec` command.
ASTERISK-28136
Change-Id: I7b0e2e90e2549f3f8e01dc96701f111b5874c88d
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
Given a sip.conf with the following content:
setvar FOO=1
setvar BAR=42
I want my generated pjsip.conf to containt the following set_vars
set_var FOO=1
set_var BAR=42
in the matching endpoint section.
Change-Id: I6c822401fda4133c3b44bf31e655b4eb939d4d26
The module 'res_pjsip_notify' inefficiently makes a lot of DB requests
on CLI completion on the endpoint.
For example if there are 10k endpoints the module makes 10k requests
of these 10k records.
Even if a part of the endpoint entered
the module makes the same 10k requests and then filtered them by itself.
This patch gathers endpoints container by prefix
and adds all gathered endpoints to completion at once.
ASTERISK-28137 #close
Change-Id: Ic20024912cc77bf4d3e476c4cd853293c52b254b
Add a new global flag to res_pjsip to allow the callerid to be used
as the username in the contact header. This allows chan_pjsip to have
the same behavour as chan_sip
ASTERISK-28087 #close
Change-Id: I9a720e058323f6862a91c62f8a8c1a4b5c087b95
This officially deprecates chan_sip in Asterisk 17+. A warning is
printed upon startup or module load to tell users that they should
consider migrating. chan_sip is still built by default but the default
modules.conf skips loading it at startup.
Very important to note we are not scheduling a time where chan_sip will
be removed. The goal of this change is to accurately inform end users
of the current state of chan_sip and encourage movement to the fully
supported chan_pjsip.
Change-Id: Icebd8848f63feab94ef882d36b2e99d73155af93
Default logging was not setup correctly when there was no logger.conf.
This resulted in many expected log messages not actually getting out to
the console.
Change-Id: I542e61c03b2f630ff5327f9de5641d776c6fa70c
