Fixed initial inalarm value for sig_analog ports.
Along with -r261007, this gets the inalarm flag in sync with chan_dahdi
for sig_analog ports.
(closes issue #16983)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@287683 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r287014 | rmudgett | 2010-09-15 15:32:24 -0500 (Wed, 15 Sep 2010) | 58 lines
The handling of call transfer signaling for mISDN PTMP is not fully implemented.
The handling of call transfer signaling for mISDN PTMP is not fully
implemented. The signaling of number updates with ISDN/DSS1 ECT
supplementary services (ETS 300 369-1) comes along with a notification
indicator IE and redirection number IE for PTMP. The implementation in
the current Asterisk mISDN channel unfortunately can handle these
information elements only in a NOTIFY message. These information elements
are also signaled in a FACILTY message with a RequestSubaddress facility,
when the subscriber is already in the active state (see 9.2.4 and 9.2.5 of
ETS 300 369-1).
**********
abe_2526_ast.patch
* Added support to handle the notification indicator IE and redirection
number IE with the RequestSubaddress facility.
* Made misdn_update_connected_line() send a NOTIFY message if Asterisk
originated the call and it is not connected yet.
* Made misdn_update_connected_line() send a FACILITY message if the call
is already connected.
This patch requires the presence of the associated mISDN patches to
compile. I had to enhance mISDN to allow the notification indicator IE
and the redirection number IE to be used with a FACILITY message. Earlier
versions of the Digium enhanced mISDN are no longer going to work.
**********
abe_2526_misdn.patch
* Made an incoming FACILITY message allow the presence of the notification
indicator IE and the redirection number IE.
**********
abe_2526_misdnuser_v3.patch
* Added support to send and receive a FACILITY message with the
notification indicator IE and the redirection number IE.
* Added the ability to send a NOTIFY message in PTMP/NT mode to all
responding subcalls in Q.931 states 6, 7, 8, 9, and 25.
**********
Patches:
abe_2526_ast.patch uploaded by rmudgett (license 664)
abe_2526_misdn.patch uploaded by rmudgett (license 664)
abe_2526_misdnuser_v3.patch uploaded by rmudgett (license 664)
Tested by: rmudgett and reporter
JIRA SWP-2146
JIRA ABE-2526
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@287017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is a new feature that allows for parking to custom parking lots to be
accessed directly, rather than with channel variables or by changing the
default parking lot. The extension is set with the parkext option just as the
default parking lot is done. Also, the manager action has been updated to
optionally allow a specified parking lot.
(closes issue #14882)
Reported by: vmikhnevych
Patches:
patch_14882.txt uploaded by mnick (license 874)
modified by me
Review: https://reviewboard.asterisk.org/r/884/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286931 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When originating a call from Unit Under Test to Reference Unit using E&M
RBS signaling mode, I get the following warning message: "Ring/Off-hook in
strange state 3 on channel 1".
Fixed the sig_analog outgoing flag. It was never set when sig_analog was
extracted from chan_dahdi.
JIRA SWP-2191
JIRA AST-408
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286904 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286115 | twilson | 2010-09-10 15:35:25 -0500 (Fri, 10 Sep 2010) | 23 lines
Merged revisions 286059 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286059 | twilson | 2010-09-10 14:25:08 -0500 (Fri, 10 Sep 2010) | 16 lines
Inherit CHANNEL() writes to both sides of a Local channel
Having Local (/n) channels as queue members and setting the language in the
extension with Set(CHANNEL(language)=fr) sets the language on the Local/...,2
channel. Hold time report playbacks happen on the Local/...,1 channel and
therefor do not play in the specified language.
This patch modifies func_channel_write to call the setoption callback and pass
the CHANNEL() write info to the callback. chan_local uses this information to
look up the other side of the channel and apply the same changes to it.
(closes issue #17673)
Reported by: Guggemand
Review: https://reviewboard.asterisk.org/r/903/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286189 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r286116 | rmudgett | 2010-09-10 15:42:44 -0500 (Fri, 10 Sep 2010) | 18 lines
Merged revisions 286113 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r286113 | rmudgett | 2010-09-10 15:33:16 -0500 (Fri, 10 Sep 2010) | 11 lines
An outgoing call may not get hung up if a pre-connect incoming ISDN call is disconnected.
If the ISDN link a pre-connect incoming call is using fails or is reset,
the outgoing leg may not hang up or be delayed in hanging up. (Causes:
PRI_CAUSE_NETWORK_OUT_OF_ORDER, PRI_CAUSE_DESTINATION_OUT_OF_ORDER, and
PRI_CAUSE_NORMAL_TEMPORARY_FAILURE.)
Just hang up the call if the incoming call leg hangs up before connecting
for any reason. It makes no sense to send a BUSY or CONGESTION control
frame to the outgoing call leg under these circumstances.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@286118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r285563 | dvossel | 2010-09-08 16:47:29 -0500 (Wed, 08 Sep 2010) | 54 lines
Fixes interoperability problems with session timer behavior in Asterisk.
CHANGES:
1. Never put "timer" in "Require" header. This is not to our benefit
and RFC 4028 section 7.1 even warns against it. It is possible for one
endpoint to perform session-timer refreshes while the other endpoint does
not support them. If in this case the end point performing the refreshing
puts "timer" in the Require field during a refresh, the dialog will
likely get terminated by the other end.
2. Change the behavior of 'session-timer=accept' in sip.conf (which is
the default behavior of Asterisk with no session timer configuration
specified) to only run session-timers as result of an incoming INVITE
request if the INVITE contains an "Session-Expires" header... Asterisk is
currently treating having the "timer" option in the "Supported" header as
a request for session timers by the UAC. I do not agree with this. Session
timers should only be negotiated in "accept" mode when the incoming INVITE
supplies a "Session-Expires" header, otherwise RFC 4028 says we should
treat a request containing no "Session-Expires" header as a session with
no expiration.
Below I have outlined some situations and what Asterisk's behavior is.
The table reflects the behavior changes implemented by this patch.
SITUATIONS:
-Asterisk as UAS
1. Incoming INVITE: NO "Session-Expires"
2. Incoming INVITE: HAS "Session-Expires"
-Asterisk as UAC
3. Outgoing INVITE: NO "Session-Expires". 200 Ok Response HAS "Session-Expires" header
4. Outgoing INVITE: NO "Session-Expires". 200 Ok Response NO "Session-Expires" header
5. Outgoing INVITE: HAS "Session-Expires".
Active - Asterisk will have an active refresh timer regardless if the other endpoint does.
Inactive - Asterisk does not have an active refresh timer regardless if the other endpoint does.
XXXXXXX - Not possible for mode.
______________________________________
|SITUATIONS | 'session-timer' MODES |
|___________|________________________|
| | originate | accept |
|-----------|------------|-----------|
|1. | Active | Inactive |
|2. | Active | Active |
|3. | XXXXXXXX | Active |
|4. | XXXXXXXX | Inactive |
|5. | Active | XXXXXXXX |
--------------------------------------
(closes issue #17005)
Reported by: alexrecarey
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@285564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The auth_options_request option was created to do authentication
on OPTIONS request just like INVITES are done. Since it has been
noted that some endpoints use OPTIONS requests as a way of qualifying
a peer and that a 401 authentication response could result in
interoperability issues, this option has been disabled by default.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@285006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
OPTIONS requests should be treated the same as an INVITE
This includes authentication. This patch adds the ability for
incoming out of dialog OPTION requests to be authenticated
before providing a response indicating whether an extension
is available or not. The authentication routine works the
exact same way as it does for incoming INVITEs. This means
that if a peer has 'insecure=invite' in their peer definition,
the same will be true for the processing of the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/881/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Simplified CLI "pri debug xx span xx" command code and removed redundant
debugging enabled messages.
* Made CLI "pri debug xx span xx" command only close the debugging log
file if it was opened.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284779 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During request to dialog matching, we attempt a best effort routine for fork
detection which requires several elements to be in place. The dialog's
initial request uri is one of those elements. Since it is best effort,
if the init_ruri is not present for some reason we can not proceed with that
routine.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284561 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adding code to Asterisk that changed the SSRC during bridges and masquerades
broke SRTP functionality. Also broken was handling the situation where an
incoming INVITE had more than one crypto offer. This patch caches the SRTP
policies the we use so that we can change the ssrc and inform libsrtp of the
new streams. It also uses the first acceptable a=crypto line from the incoming
INVITE.
(closes issue #17563)
Reported by: Alexcr
Patches:
srtp.diff uploaded by twilson (license 396)
Tested by: twilson
Review: https://reviewboard.asterisk.org/r/878/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@284477 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283691 | dvossel | 2010-08-26 10:24:40 -0500 (Thu, 26 Aug 2010) | 25 lines
Merged revisions 283690 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283690 | dvossel | 2010-08-26 10:22:28 -0500 (Thu, 26 Aug 2010) | 19 lines
Fixed how Asterisk destroys a dialog on channel hangup before invite receives a response.
If an ast_channel with a SIP tech pvt hangs up before the sip dialog gets a response
to its outgoing INVITE, Asterisk used to pretend_ack the INVITE. This is not rfc
compliant and results in confusion at the other endpoint. sip_pretend_ack will ack
and remove all the packets in the retransmit queue. This means that the INVITE will
stop retransmitting, and that any response to that INVITE that comes after the pretend_ack
occurs will be ignored.
Instead of faking any sort of acknowledgement for an outgoing INVITE during an internal
hangup, we should let the protocol stack process the INVITE transaction and terminate
the dialog properly. This is achieved by setting the PENDING_BYE flag. When this flag
is used, once the dialog proceeds to an escapable state the transaction will either be
canceled with a SIP_CANCEL or completed followed immediately by a BYE. Attempting to do
this any other way is incorrect. If the endpoint is not responding to the INVITE request,
the INVITE must continue to be retransmitted until it times out which will result in the
dialog being destroyed.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283594 | dvossel | 2010-08-25 17:56:42 -0500 (Wed, 25 Aug 2010) | 7 lines
Add to and from tags to NOTIFY dialog-info xml body so pickup can occur.
When pedantic mode is used, the dialog-info xml generated during a
ringing event must contain the to and from tag values. Otherwise if
a pickup occurs using INVITE with replaces, Astrisk will not be able
to locate the subscription.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r283558 | dvossel | 2010-08-25 10:52:54 -0500 (Wed, 25 Aug 2010) | 10 lines
Asterisk will not advertise session timers are supported when 'session-timers=refuse' is used.
Asterisk now dynamically builds the "Supported" header depending
on what is enabled/disabled in sip.conf. Session timers used
to always be advertised as being supported even when they were disabled
in the configuration. This caused problems with some end points.
(issue #17005)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283381 | dvossel | 2010-08-24 11:07:37 -0500 (Tue, 24 Aug 2010) | 18 lines
Merged revisions 283380 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283380 | dvossel | 2010-08-24 11:01:51 -0500 (Tue, 24 Aug 2010) | 11 lines
This fix makes sure the ast_channel hangs up correctly when the dialog's PENDING_BYE flag is set.
When the pending bye flag is used, it is possible that the dialog will terminate
and leave the sip_pvt->owner channel up. This is because we never hangup the
ast_channel after sending the SIP_BYE request. When we receive the response for
the SIP_BYE we set need_destroy which we would expect to destroy the dialog on the
next do_monitor loop, but this is not the case. The dialog will only be destroyed
once the owner is hungup even with the need_destroy flag set. This patch sets the
softhangup flag on the ast_channel when a SIP_BYE request is sent as a result of the
pending bye flag.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283382 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r283049 | rmudgett | 2010-08-20 10:31:03 -0500 (Fri, 20 Aug 2010) | 29 lines
Merged revisions 283048 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r283048 | rmudgett | 2010-08-20 10:24:36 -0500 (Fri, 20 Aug 2010) | 22 lines
Q931 - Sending PROGRESS after sending ALERTING is a protocol error
The PRI layer in chan_dadhi will check if a PROGRESS message has already
been sent, and not allow sending another (although that is technically
allowed by the Q931 spec), however it does not protect against sending an
ALERTING and then sending a PROGRESS message, which is a violation of the
specification.
Most switches don't seem to care too deeply about this, but some do, and
will disconnect the call when receiving this invalid sequence.
Protocol specification reference: T-REC-Q.931-199805-I page 223, "Figure
A.5/Q.931 -- Overview protocol control (network side) point-point
(sheet 3 of 8)"
(closes issue #17874)
Reported by: nic_bellamy
Patches:
asterisk-1.4-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-1.6.2-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
asterisk-trunk-r282537_no-progress-after-alerting.patch uploaded by nic bellamy (license 299)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@283050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r282894 | dvossel | 2010-08-19 16:05:54 -0500 (Thu, 19 Aug 2010) | 18 lines
Merged revisions 282893 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r282893 | dvossel | 2010-08-19 16:03:24 -0500 (Thu, 19 Aug 2010) | 11 lines
tos_sip option was not being set correctly
When tos_sip is used, the tos of the sip socket is only set
correctly if the socket binding changes on a reload. If the binding
stays the same but the TOS changes, the new tos value would not take
into effect. This patch fixes that.
(closes issue #17712)
Reported by: nickb
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@282895 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes the way asterisk handles NOTIFY requests received in response to REFER requests. These changes to NOTIFY handler were first introduced in r217482. This new change properly handles the 200 response by queueing an AST_TRANSFER_SUCCESS control frame and also prevents that control frame from being queued when provisional and unknown responses are received.
(issue #17486)
Reported by: davidw
Tested by: mnicholson
(issue #12713)
Reported by: davidw
Review: https://reviewboard.asterisk.org/r/860/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@282639 65c4cc65-6c06-0410-ace0-fbb531ad65f3
