It is possible to pre-load pbx_config. As a result, pbx_config - which will
load and parse the dialplan - will attempt to use various dialplan components,
such as device state providers and presence state providers, prior to them
being initialized by the core. This would lead to a crash, as the components
had not created their Stasis cache entries.
This patch moves a number of core component initializations before the module
pre-load. This guarantees that if someone does pre-load pbx_config - or other
pbx modules - that the Stasis caches for the various core components are
created.
(closes issue ASTERISK-23320)
Reported by: xrobau
(closes issue ASTERISK-23265)
Reported by: Andrew Nagy
Tested by: Andrew Nagy, Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408855 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk didn't support the dynamic payload change in rtp mapping in the 200
OK response.
Scenario:
Asterisk sends the INVITE proposing alaw and telephone-event, it proposes
rtpmap:101 for telephone-event. Peer responds with 2xx, it answers with
alaw and telephone-event also, but it proposes a different rtpmap number
(rtpmap:103) for telephone-event.
Expected Behaviour:
Asterisk should honour the rtpmapping in the response and send DTMF packets
using 103 as payload type for DTMF.
Actual Behaviour: Asterisk sends DTMF packets using payload type 101.
With this patch asterisk now supports changes that can occur in the rtp mapping
in the response.
(closes issue ASTERISK-23279)
Reported by: NITESH BANSAL
Review: https://reviewboard.asterisk.org/r/3225/
Patches:
dynamic_payload_change.patch uploaded by nbansal (license 6418)
........
Merged revisions 408729 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixed use of uninitialized ao2 container iterator in an off-nominal
condition. Either a memory allocation error or the requested channel is
an internal channel not exposed to the outside.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408715 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed json ref counting issue with json API wrapper code for
ast_json_object_update_existing() and ast_json_object_update_missing()
when the json library is earlier than version 2.3.0.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408711 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Updated the code to check to see if MOH is playing on the transferor and if
so then start it on the channel that replaces it during a masquerade.
Example scenario of the problem:
Alice calls Bob and then Bob begins the attended transfer process into a queue.
Upon going on hold Alice hears music and so does Bob once he is in the queue.
Bob then transfers Alice into the queue and then music for Alice stops even
though she should be hearing it since has now replaced Bob in the queue.
The problem that was occurring is that once the channel was masqueraded the app
(queues, confbridge, etc...) had no way of knowing that the channel had just
been swapped out thus it did not start music for the present channel.
Credit to Olle Johansson for pointing me in the right direction on this issue.
(closes issue ASTERISK-19499)
Reported by: Timo Teräs
Review: https://reviewboard.asterisk.org/r/3226/
........
Merged revisions 408642 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 408643 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to retrieve an arbitrary sorcery instance from a dialplan function
(or any place else) there needs to be a registry of sorcery instances.
ast_sorcery_init now creates a hashtab as a registry.
ast_sorcery_open now checks the hashtab for an existing sorcery instance
matching the caller's module name. If it finds one, it bumps the
refcount and returns it. If not, it creates a new sorcery instance,
adds it to the hashtab, then returns it.
ast_sorcery_retrieve_by_module_name is a new function that does a hashtab
lookup by module name. It can be called by the future dialplan function.
res_pjsip/config_system needed a small change to share the main res_pjsip
sorcery instance.
tests/test_sorcery was updated to include a test for the registry.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3184/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408518 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Repeatedly modifying config files and reloading too fast sometimes fails
to reload the configuration because the cached modification timestamp has
one second resolution.
* Added file size and nanosecond resolution fields to the cached config
file modification timestamp information. Now if the file size changes or
the file system supports nanosecond resolution the modified file has a
better chance of being detected for reload.
* Added a missing unlock in an off-nominal code path.
(closes issue AST-1303)
Review: https://reviewboard.asterisk.org/r/3235/
........
Merged revisions 408387 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 408388 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is highly unlikely, but - at least in Asterisk 12 - theoretically possible
to load Asterisk with no dialplan whatsoever. If that occurs, and some other
module (that is not a pbx module) attempts to merge its contexts into the
dialplan, the existing merge routine will crash. This is because it is not
insane, and rightly believes that you provided some sort of dialplan,
somewhere.
This patch will gracefully merge the contexts in such a case. Note that this
is highly unlikely to occur in 1.8/11, as features will most likely provide
some dialplan via parking. However, in Asterisk 12, parking is now provided
by res_parking, and hence may create its dialplan later.
(closes issue ASTERISK-23297)
Reported by: CJ Oster
Review: https://reviewboard.asterisk.org/r/3222
........
Merged revisions 408200 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 408201 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408220 65c4cc65-6c06-0410-ace0-fbb531ad65f3
URI's are supposed to be case sensitive and all
lower case. In practice some portions of URI's
in ARI are case insensitive and others are not,
such as TECH, which in one instance would match
a lower case name and in another would not. In
this patch, the ast_endpoint_lastest_snapshot()
function is modified to change the TECH portion
to full upper case before lookup. This resolves
the discrepancy noted by the reporter. However
I chose to avoid forcing the /ari prefix of the
URI's to be lower case for now. Except for the
two cases here, all URI's should be lower case,
unless they are part of a resource name or id.
Review: https://reviewboard.asterisk.org/r/3211/
Reported by: Zane Conkle
(closes issue ASTERISK-23125)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408140 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ast_format_sdp_parse and ast_format_sdp_generate
the check checks for a valid interface and function
were potentially confusing, and hid an error in the
test of the presence of the function that is called
later. This patch clears up and corrects the test.
Review: https://reviewboard.asterisk.org/r/3208/
(closes issue ASTERISK-23098)
Reported by: marcelloceschia
Patches:
main_format.patch uploaded by marcelloceschia (license 6036)
ASTERISK-23098.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 408137 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@408138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The old code depended on undefined va_arg behaviour: calling a function
twice with the same va_list parameter and expecting it to continue where
it left off. The changed code behaves like the manpage says it should.
Also added a bunch of early returns to trap errors (e.g. OOM) instead of
crashing.
The problem was found by Julian Lyndon-Smith. The deviant behaviour on
the raspberry PI also uncovered another bug (fixed in r407875) in the
res_config_pgsql.so driver.
Reported by: jmls
Tested by: jmls
Review: https://reviewboard.asterisk.org/r/3201/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407968 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When formatting an optional IE, the value is, of course, optional. As such, it
is entirely appropriate for ast_json_object_get to return NULL. If that occurs,
we now simply skip the IE that was requested, as it was not provided by the
entity that raised the event.
Thanks to George Joseph (gtjoseph) for catching this and reporting it in
#asterisk-dev
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The appdocsxml.dtd specifies that a "required" attribute in a parameter may
have a value of yes, no, true, or false. On some systems, specifying "False"
instead of "false" would cause a validation error. This patch fixes the casing
to explicitly match the DTD.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds documentation for the Security Events that are emited over
AMI. It also notes these events in the UPGRADE/CHANGES file.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407589 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch brings CDR processing further in line with r407085. During some dial
operations, the application would not be locked to the Dial application and
would instead continue to show the previously known application. In particular,
this would occur when a Parked call would time out. This was due to a previous
snapshot already locking the application to Park - processing this in a Dial
Begin allows the Dial application to reassert its rightful place.
(CDRs. Ugh.)
But hooray for the Parked Call tests for catching this in the Asterisk Test
Suite.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change enables transfers within ARI created bridges and adds events
for when they occur. Unlike other events these will be received if *any*
subscribed object is involved in the transfer.
(closes issue ASTERISK-22984)
Reported by: David M. Lee
Review: https://reviewboard.asterisk.org/r/3120/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a number of small-ish problems that were noticed when
witnessing the records that the FreePBX dialplan produces:
(1) Mid-call events (as well as privacy options) have the ability to change the
overall state of the Dial operation after the called party answers. This
means that publishing the DialEnd event when the called party is premature;
we have to wait for the execution of these subroutines to complete before
we can signal the overall status of the DialEnd. This patch moves that
publication and adds handlers for the mid-call events.
(2) The AST_FLAG_OUTGOING channel flag is cleared if an after bridge goto
datastore is detected. This flag was preventing CDRs from being recorded
for all outbound channels that had a 'continue' option enabled on them by
the Dial application.
(3) The CDR engine now locks the 'Dial' application as being the CDR
application if it detects that the current CDR has entered that app. This
is similar to the logic that is done for Parking. In general, if we entered
into Dial, then we want that CDR to record the application as such - this
prevents pre-dial handlers, mid-call handlers, and other shenaniganry
from changing the application value.
(4) The CDR engine now checks for the AST_SOFTHANGUP_HANGUP_EXEC in more places
to determine if the channel is in hangup logic or dead. In either case, we
don't want to record changes in the channel.
(5) The default option for "endbeforehexten" has been changed to "yes". In
general, you don't want to see CDRs in the 'h' exten or in hangup logic.
Since the semantics of that option changed in 12, it made sense to update
the default value as well.
(6) Finally, because we now have the ability to synchronize on the messages
published to the CDR topic, on shutdown the CDR engine will now synchronize
to the messages currently in flight. This helps to ensure that all
in-flight CDRs are written before shutting down.
(closes issue ASTERISK-23164)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3154
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@407084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The ast_filestream object gets tacked on to a channel via
chan->timingdata. It's a reference counted object, but the reference
count isn't used when putting it on a channel. It's theoretically
possible for another thread to interfere with the channel while it's
unlocked and cause the filestream to get destroyed.
Use the astobj2 reference count to make sure that as long as this code
path is holding on the ast_filestream and passing it into the file.c
playback code, that it knows it's valid.
Bug reported by Leif Madsen.
Review: https://reviewboard.asterisk.org/r/3135/
........
Merged revisions 406566 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 406567 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@406574 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL data structures need to be protected during a configuration reload
and shutdown. Asterisk crashed during a shutdown because CEL events were
still in flight and the CEL data structures were already destroyed.
* Protected the cel_backends, cel_dialstatus_store, and cel_linkedids ao2
containers with a global ao2 object wrapper.
* Added NULL checks before use of the cel_backends, cel_dialstatus_store,
and cel_linkedids ao2 containers in case the CEL module is already
shutdown.
* Fixed overloading of the cel_linkedids held objects reference count.
During shutdown any held objects would be leaked.
* Fixed memory leak of cel_linkedids held objects if the LINKEDID_END is
not being tracked. The objects in the cel_linkedids container were not
removed if the LINKEDID_END event is not used.
* Added access protection to the cel_backends container during the CLI
"cel show status" command.
* Made cel_backends, cel_dialstatus_store, and cel_linkedids use the
standard ao2 callback templates for the hash and cmp functions.
* Eliminated unnecessary uses of RAII_VAR().
* Made ast_cel_engine_init() cleanup alocated resources on failure.
(closes issue AST-1253)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3128/
........
Merged revisions 406417 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 406418 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@406465 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made register atexit shutdown routine only once in __init_manager().
* Fixed some initial load failure conditions in __init_manager().
* Made reset options to defaults on reload when the reload will actually
happen.
* Removed unnecessary container traversals of the white/black filters
during manager_free_user().
* ast_free() does not need a NULL check before calling.
........
Merged revisions 406359 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 406400 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@406401 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally, the manager module would get an "INTERNAL_OBJ: bad magic
number" error on a "core restart gracefully" command if an AMI connection
is established.
* Added ao2_global_obj protection to the sessions global container.
* Fixed the order of unreferencing a session object in session_destroy().
* Removed unnecessary container traversals of the white/black filters
during session_destructor().
(closes issue AST-1242)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3144/
........
Merged revisions 406341 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@406342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405875 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change implements support for HTTP Transfer-Encoding
chunked in both JSON and Form (post vars) body content. A
new function ast_http_get_contents() handles both regular
and chunked mode body, returning after the entire body is
received.
(closes issue ASTERISK-23068)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3125/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes typos of "transfered" instead of "transferred" in various code. Fixes incorrect gosub param help text for app_queue.
Fixes Asterisk man pages containing unquoted minus signs. Adds note about the "textsupport" option in sip.conf.sample.
(issue ASTERISK-23061)
(issue ASTERISK-23028)
(issue ASTERISK-23046)
(issue ASTERISK-23027)
(closes issue ASTERISK-23061)
(closes issue ASTERISK-23028)
(closes issue ASTERISK-23046)
(closes issue ASTERISK-23027)
Reported by: Eugene, Jeremy Laine, Denis Pantsyrev
Patches:
transferred.patch uploaded by Jeremy Laine (license 6561)
hyphen.patch uploaded by Jeremy Laine (license 6561)
sip.conf.sample.patch uploaded by Eugene (license 6360)
........
Merged revisions 405791 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 405792 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
action_originate responds to the remote system with an error when cap==NULL,
but doesn't return (abort the originate). Patched to return.
(closes issue ASTERISK-23034)
Reported by: Corey Farrell
Patches:
ASTERISK-23034.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 405745 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The per console verbose level feature as previously implemented caused a
large performance penalty. The fix required some minor incompatibilities
if the new rasterisk is used to connect to an earlier version. If the new
rasterisk connects to an older Asterisk version then the root console
verbose level is always affected by the "core set verbose" command of the
remote console even though it may appear to only affect the current
console. If an older version of rasterisk connects to the new version
then the "core set verbose" command will have no effect.
* Fixed the verbose performance by not generating a verbose message if
nothing is going to use it and then filtered any generated verbose
messages before actually sending them to the remote consoles.
* Split the "core set debug" and "core set verbose" CLI commands to remove
the per module verbose support that cannot work with the per console
verbose level.
* Added a silent option to the "core set verbose" command.
* Fixed "core set debug off" tab completion.
* Made "core show settings" list the current console verbosity in addition
to the root console verbosity.
* Changed the default verbose level of the 'verbose' setting in the
logger.conf [logfiles] section. The default is now to once again follow
the current root console level. As a result, using the AMI Command action
with "core set verbose" could again set the root console verbose level and
affect the verbose level logged.
(closes issue AST-1252)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/3114/
........
Merged revisions 405431 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In https://reviewboard.asterisk.org/r/3057/, applications and functions that
manipulate CDRs were made to interact over Stasis. This was done to
synchronize manipulations of CDRs from the dialplan with the updates the
engine itself receives over the message bus.
This change rested on a faulty premise: that messages published to the CDR
topic or to a topic that forwards to the CDR topic are synchronized with the
messages handled by the CDR topic subscription in the CDR engine. This is not
the case. There is no ordering guaranteed for two messages published to the
same topic; ordering is only guaranteed if a message is published to the same
subscriber.
Stasis was modified in r405311 to allow a publisher to synchronize on the
subscriber. This patch uses that API to synchronize the CDR publishers with
the CDR engine message router, which maintains the overall topic subscription.
(closes issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds an API call to Stasis that allows a publisher to publish a
stasis message that will not return until a specific subscriber handles the
message. Since a subscriber can have their own forwarding topic which orders
messages from many topics, this allows a publisher who knows of that subscriber
to synchronize to that subscriber regardless of the forwarding relationships
between topics.
This is of particular use for dialplan applications that need to synchronize
on a particular subscriber's handling of a message.
(issue ASTERISK-22884)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3099/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects the ao2_iterator opacity violations in
res_pjsip_session.c by adding a global function to get the number of
elements inside the container hidden behind the iterator.
(closes issue ASTERISK-23053)
Review: https://reviewboard.asterisk.org/r/3111/
Reported by: Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405253 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk does not support any of the transfer encodings specified in
HTTP/1.1, other than the default "identity" encoding.
According to RFC 2616:
A server which receives an entity-body with a transfer-coding it does
not understand SHOULD return 501 (Unimplemented), and close the
connection. A server MUST NOT send transfer-codings to an HTTP/1.0
client.
This patch adds the 501 Unimplemented response, instead of the hard work
of actually implementing other recordings.
This behavior is especially problematic for Node.js clients, which use
chunked encoding by default.
(closes issue ASTERISK-22486)
Review: https://reviewboard.asterisk.org/r/3092/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404565 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404480 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Matthew Jordan
Corey Farrell
Kevin Harwell
Richard Mudgett
George Joseph
Scott Griepentrog
Walter Doekes
Kinsey Moore
Joshua Colp
Sean Bright
Russell Bryant
Rusty Newton
Tzafrir Cohen
David M. Lee