The default codec configuration for chan_iax2 is bandwidth=low. I noticed
slin16 being negotiated as the codec in some test calls, but that no longer
happens after this change.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@184037 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r183115 | mmichelson | 2009-03-19 11:04:02 -0500 (Thu, 19 Mar 2009) | 14 lines
Fix an issue where cancelled outgoing SIP calls would erroneously report the device as "in use."
A user was having an issue where if an outgoing SIP call was canceled, the SIP device
would remain in use if we had not received any response to the initial INVITE we sent out.
The SIP device would remain in use until the autocongestion timer was exhausted.
I tracked down the cause of this to be the section of code I am removing here. I asked several
people what the purpose of this code was meant to be, but no one could give me any sort of
answer as to why this was here. The person who was having this issue has been using this patch
for several months and it has stopped the problems they have had.
AST-196
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183117 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously we reached across the channel bridge to get the other party's SIP dialog
structure in order to trigger an outgoing reinvite. This is extremely dangerous to do
and only works if bridged to another SIP channel. This patch changes this to use the
T38 control frame method of requesting a switchover. This change also causes the SIP
channel driver to propogate back whether the switchover worked or not instead of blindly
accepting the incoming T38 reinvite.
Review: http://reviewboard.digium.com/r/200/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@183108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182847 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Chan_h323 can now be compiled against both the previously supported versions of
OpenH323 as well as the current H.323 Plus (version 1.20.2). The configure
script has been modified to look in the default install location of h323 to
hopefully help avoid using the environment variables OPENH323DIR and PWLIBDIR.
Also, the CLI command "h323 show version" has been added which indicates which
version of h323 is in use.
(closes issue #11261)
Reported by: vhatz
Patches:
asterisk-1.6.0.6-h323plus.patch uploaded by jthurman (license 614)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed OPENR2 using an incorrect string value if the extension
delimiter is not present in the Dial() function. This was fixed for
SS7 and PRI in trunk -r172400.
* Made OPENR2 stripmsd behavior the same as the SS7, PRI, and others.
* Removed trailing whitespace that appeared with OPENR2.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces official support for R2 signaling in chan_dahdi. The
modifications to chan_dahdi, and the supporting library, LibOpenR2, were both
written by Moises Silva.
Many users are using this code, or a variant of it, in Asterisk 1.2, 1.4 and 1.6
in Brazil, México and Argentina. An unknown number of users (but at least 1)
are using it in each of the following countries: Colombia, Nepal, Thailand,
Venezuela, Perú, and probably others.
To use this code, LibOpenR2 must be installed from http://www.libopenr2.org/.
Information about configuration can be found in configs/chan_dahdi.conf.sample.
The code committed is the most up to date version, which was being maintained
in svn/asterisk/team/moy/mfcr2/.
I would also like to include a Thank You to the many others that tested this
code beyond those listed in this commit message. These are the names that I
could find in the mantis issue.
(closes issue #12509)
Reported by: moy
Patches:
chan_zap-mfr2.patch uploaded by moy (license 222)
Tested by: moy, korihor, viniciusfontes, Skarmeth, loloski, asbestoshead, titogarrido, heliocoelhojr, konsultex, ncorrare, ecarruda, rtorresduque, PTorres, ychen
Review: http://reviewboard.digium.com/r/40/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182281 | dvossel | 2009-03-16 12:47:42 -0500 (Mon, 16 Mar 2009) | 7 lines
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182282 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code responsible for sending the T38 reinvite did not check if an INVITE was
already being handled. This caused things to get confused and the call to fail.
The code now defers sending the T38 reinvite until the current INVITE is done being
handled.
(issue AST-191)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@182022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181768 | mmichelson | 2009-03-12 13:29:48 -0500 (Thu, 12 Mar 2009) | 22 lines
Properly send a 487 on an INVITE we have not responded to if we receive a BYE.
If we receive an INVITE from an endpoint and then later receive a BYE from that
same endpoint before we have sent a final response for the INVITE, then we need
to respond to the INVITE with a 487.
There was logic in the code prior to this commit which seemed to exist solely to
handle this situation, but there was one condition in an if statement which
was incorrect. The only way we would send a 487 was if the sip_pvt had no owner
channel. This made no sense since we created the owner channel when we received
the INVITE, meaning that the majority of the time we would never send the 487.
The 487 being sent should not rely on whether we have created a channel. Its
delivery should be dependent on the current state of the initial INVITE transaction.
With this commit, that logic is now correctly in place.
(closes issue #14149)
Reported by: legranjl
Patches:
14149.patch uploaded by mmichelson (license 60)
Tested by: legranjl
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181340 | dvossel | 2009-03-11 12:25:31 -0500 (Wed, 11 Mar 2009) | 11 lines
encrypted IAX2 during packet loss causes decryption to fail on retransmitted frames
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181371 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181328 | file | 2009-03-11 14:22:52 -0300 (Wed, 11 Mar 2009) | 14 lines
Fix issue where an attended transfer could not be completed under a rare scenario.
When completing an attended transfer chan_sip does a check to make sure the extension
in the URI portion of the Refer-To header is a local valid extension. We don't actually
need to check this since we know for sure the other channel is already up and talking to
the extension. Some devices do not put the extension in the Refer-To header either, which
can cause the extension check to fail. We now no longer do this check if it is an attended
transfer.
(closes issue #14628)
Reported by: sverre
Patches:
14628.diff uploaded by file (license 11)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181295 | file | 2009-03-11 13:36:50 -0300 (Wed, 11 Mar 2009) | 9 lines
Fix a problem with inband DTMF detection on outgoing SIP calls when dtmfmode=auto.
When dtmfmode was set to auto the inband DTMF detector was not setup
on outgoing SIP calls. This caused inband DTMF detection to fail.
The inband DTMF detector is now setup for both dtmfmode inband and auto.
(closes issue #13713)
Reported by: makoto
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The main problem here was that cstdlib was undefining free thereby causing the
proper debug macros to not be used. ast_h323.cxx has been changed to call
ast_free instead to avoid the issue.
A few other issues were addressed:
- There were a few instances of functions improperly passing ast_free instead
of ast_free_ptr.
- Some clean up was done to avoid the debug macros intentionally being redefined.
(copied below from Kevin's commit, appreciate the help)
- disable astmm.h from doing anything when STANDALONE is defined, which is used
by the tools in the utils/ directory that use parts of Asterisk header files in
hackish ways; also ensure that utils/extconf.c and utils/conf2ael.c are
compiled with STANDALONE defined.
(closes issue #13593)
Reported by: pj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@181135 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit brings in the bridging core, bridging technologies,
and the ConfBridge application.
For usage information on the ConfBridge application please see
the output of "core show application ConfBridge" from the CLI.
For API documentation please see the doxygen page describing the
architecture and the documentation for each API call.
Review: http://reviewboard.digium.com/r/93/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180369 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, chan_sip had both sip_peer and sip_user objects in memory. A
patch went in to remove sip_user to simplify the code, since everything
could be done with just sip_peer. This patch resolves some regressions
found that were introduced by those changes.
This code comes from svn/asterisk/team/group/sip-object-matching/.
Here is a list of the changes that have been made:
1) When doing a match by name with the find_peer() function, make it much
easier to specify which objects should be matched by having a parameter
that specifies exactly which object types should be considered. Also,
update find_by_name() to handle this parameter. Finally, update all
code to use the new option values.
2) When looking up an object for an outbound request by name, consider
peers only. (create_addr())
3) Only match peers on an incoming registration request.
4) When doing authentication (except for SUBSCRIBE), look up users
by name, instead of all objects by name.
5) When doing authentication (except for SUBSCRIBE), after looking for
a user by name, look for a peer by IP address, instead of all objects
by IP address.
6) When handling the SIP qualify CLI command or manager action, look for
a peer by name, instead of any object by name.
7) When handling the SIP unregister CLI command, look for a peer by name,
instead of any object by name.
9) In sip_do_debug_peer(), search for a peer by name, instead of any object
by name.
9) When handling the SIPPEER() dialplan function, search for a peer by name,
instead of any object by name.
10) In the following session timer related functions, st_get_se(),
st_get_refresher(), and st_get_mode(), when looking for an object for a
given sip_pvt using pvt->peername, look for a peer by name, instead of any
object by name.
11) Fix build_peer() to properly handle the case where separate type=peer and
type=user entries were specified in sip.conf.
(closes issue #14505)
Reported by: lmadsen
Review: http://reviewboard.digium.com/r/172/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180261 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the subscription context for a call pickup subscription differs
from the context of the call pickup target, there's not an easy way
to divine what context should be used for the pickup. The way to work
around this is to use PICKUPMARK as the context for the pickup.
This has been documented in the sip.conf.sample file
(ABE-1708)
closes issue #14567
submitted by: alecdavis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@180155 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Previously, only the "data" field of the sip_pkt created during __sip_reliable_xmit
was freed when XMIT_ERROR was returned by __sip_xmit. When retrans_pkt was called,
this inevitably resulted in the reading and writing of freed memory.
XMIT_ERROR is a condition meaning that we don't want to attempt resending the packet
at all. The proper action to take is to remove the scheduler entry we just created,
free the packet's data as well as the packet itself, and unlink it from the list of
packets on the sip_pvt structure.
(closes issue #14455)
Reported by: Nick_Lewis
Patches:
14455.patch uploaded by mmichelson (license 60)
Tested by: Nick_Lewis
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179219 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Special thanks goes to DEA who had to redo this patch twice
because we first put unload/load support in and later redid the way
we configure devices and lines.
(closes issue #10297)
Reported by: DEA
Patches:
skinny-reload-trunkv2.diff uploaded by wedhorn (license 30)
skinny-reload-trunk-v4.txt uploaded by DEA (license 3)
With mods by me based on feedback from wedhorn and Russell and seanbright
Tested by: DEA, mvanbaak, pj
Review: http://reviewboard.digium.com/r/130/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@179122 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Iax2 prune realtime had issues. If "iax2 prune realtime all" was called, it would appear like the command was successful, but in reality nothing happened. This is because the reload that was supposed to take place checks the config files, sees no changes, and does nothing. If there had been a change in the the config file, the realtime users would have been marked for deletion and everything would have been fine. Now prune_users() and prune_peers() are called instead of reload_config() to prune all users/peers that are realtime. These functions remove all users/peers with the rtfriend and delme flags set. iax2_prune_realtime() also lacked the code to properly delete a single friend. For example. if iax2 prune realtime <friend> was called, only the peer instance would be removed. The user would still remain.
(closes issue #14479)
Reported by: mousepad99
Review: http://reviewboard.digium.com/r/176/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Manager command "iaxpeers" now shows if a link is trunked and encrypted. Instead of encryption saying simply "yes" or "no", it now displays what type of encryption is enabled and if keyrotation is on or not.
(closes issue #14427)
Reported by: snuffy
Patches:
iax_show_trunks.diff uploaded by snuffy (license 35)
2009022200_iax2_show_trunkencryption.diff.txt uploaded by mvanbaak (license 7)
Tested by: mvanbaak, dvossel, snuffy
Review: http://reviewboard.digium.com/r/173/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178300 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178205 | file | 2009-02-24 11:16:07 -0400 (Tue, 24 Feb 2009) | 9 lines
Skip check for extension when subscribing for MWI.
Since the remote side is not actually subscribing to a specific extension when
subscribing for MWI just skip the check to see if the extension exists. They can't use it
to specify the mailbox either since we require configuration of that in sip.conf
(closes issue #14531)
Reported by: festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178213 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Key rotation was enabled by default by setting the global encryption method to IAX_ENCRYPT_KEYROTATE. the problem with this is that if encryption is not enabled, and the encryption method is set to anything except 0, the peer appears to have encryption enabled when issuing a "iax2 show peers". Rather than have the key rotation bit always set by default, it is now only set when an encryption method is enabled.
(closes issue #14523)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@178030 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several changes in PTLib have occurred requiring build time detection. Changes
accounted for include the library name change, config option change, install
location change, and a boolean type change which is handled by ast_ptlib.h.
Also, the sed check has been modified to properly work with autoconf >= 2.62.
(closes issue #14224)
Reported by: bergolth
Patches:
asterisk-autoconf-sed.patch uploaded by bergolth (license 661)
asterisk-pwlib-v3.patch uploaded by bergolth (license 661)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@177162 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous implementation of T38 faxdetect resulted in both sides of the
call jumping to a fax extension when both sides had 't38pt_udptl=yes' and
'faxdetect=yes' in sip.conf and a 'fax' extension in the current context.
This revision will jump to a 'fax' extension on incoming calls only.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is required to create a UDPTL structure in create_addr_from_peer() to handle the
scenario where 't38pt_udptl=yes' is not defined in the [general] section of sip.conf but
is defined the peer's context. I tested this patch by enabling t38pt_udptl in the
[general] section on one system and only enabling t38pt_udptl in a peer's context on
the system sending a fax. Without the patch, the sending system will fail to initiate
T38 negotiation with the warning message, "No way to add SDP without an UDPTL structure".
When this patch is applied the sending side will successfully initiate T38 negotiation.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
masq, so that the group count lingers past the bridge.
(closes issue #14275)
Reported by: kowalma
Patches:
20090216__bug14275.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176642 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes a number of changes to the indications API. The primary
motivation for this work was to improve stability. The object management
in this API was significantly flawed, and a number of trivial situations could
cause crashes.
The changes included are:
1) Remove the module res_indications. This included the critical functionality
that actually loaded the indications configuration. I have seen many people
have Asterisk problems because they accidentally did not have an
indications.conf present and loaded. Now, this code is in the core,
and Asterisk will fail to start without indications configuration.
There was one part of res_indications, the dialplan applications, which did
belong in a module, and have been moved to a new module, app_playtones.
2) Object management has been significantly changed. Tone zones are now
managed using astobj2, and it is no longer possible to crash Asterisk by
issuing a reload that destroys tone zones while they are in use.
3) The API documentation has been filled out.
4) The API has been updated to follow our naming conventions.
5) Various bits of code throughout the tree have been updated to account
for the API update.
6) Configuration parsing has been mostly re-written.
7) "Code cleanup"
The code is from svn/asterisk/team/russell/indications/.
Review: http://reviewboard.digium.com/r/149/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@176627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
