Per the documentation the WebSocket support in chan_sip is
supposed to be enabled by default but is not. This change
corrects that.
Change-Id: Icb02bbcad47b11a795c14ce20a9bf29649a54423
The JSON library Asterisk uses, jansson, is not thread
safe for us in a few ways. To help with this wrappers for JSON
object reference count increasing and decreasing were added
which use a global lock to ensure they don't clobber over
each other. This does not extend to reference count manipulation
within the jansson library itself. This means you can't safely
use the object borrowing specifier (O) in ast_json_pack and
you can't share JSON instances between objects.
This change removes uses of the O specifier and replaces them
with the o specifier and an explicit ast_json_ref. Some cases
of instance sharing have also been removed.
ASTERISK-25601 #close
Change-Id: I06550d8b0cc1bfeb56cab580a4e608ae4f1ec7d1
When running the PJSIP AMI "show_endpoint" test with automatic
conversion to realtime, the test would fail. This was because the AOR
"contact" column was sized at 40, and the configured contact was larger
than that.
This commit increases the size of the contact column to 255 characters.
Change-Id: Ia65bc7fd37699b7c0eaef9629a1a31eab9a24ba1
The keep_alive_interval option was added about a year ago, but no
alembic revision was created to add the appropriate column to the
database.
This commit fixes the problem and adds the column. This was discovered
by running the testsuite with automatic conversion to realtime enabled.
Change-Id: If3ef92a7c4f4844d08f8aae170d2178aec5c4c1a
- Trigger pending DTLS packets to send out, once the RTP instance's remote
address is set.
- Avoids locking the DTLS structure unnecessarily by only doing this if
DTLS is passive.
- Add DTLS locks around the structurally sensitive calls in the SSL
portion of __rtp_recvfrom, since dtls_srtp_check_pending does not lock
inside of itself, and we're dealing with the SSL BIO in at least two
threads.
WebRTC channels may receive a DTLS handshake before
ast_rtp_remote_address_set is called, which causes there to be a pending
response to send out. Previous to 1ad827, this was handled by calling
dtls_srtp_check_pending on receipt of any RTP packet - a STUN or RTP
packet could trigger the pending handshake response. Since that was
rightfully removed, whenever the DTLS handshake is received before the
remote address is set, we would have to wait until another SSL packet
arrives.
As of Chrome M47's optimizations to their handshake process, WebRTC
conversations between Chrome M47+ and Asterisk, where Asterisk is passive,
experience a 1 second delay without this patch, because the SSL handshake
is received before ICE negotation stores the remote_address, and the next
SSL packet isn't received until after a 1 second timeout in Chrome, which
causes a new handshake request.
ASTERISK-25614 #close
Change-Id: I547f1be7e302dbf71f6553dd8cbc0657b1d0b908
An ERROR or WARNING message should generally indicate that something has gone
wrong in Asterisk. In the case of writing to a file descriptor, Asterisk is not
in control of when the far end closes its reading on a file descriptor. If the
far end does close the file descriptor in an unclean fashion, this isn't a bug
or error in Asterisk, particularly when the situation can be gracefully
handled in Asterisk.
Currently, when this happens, a user would see the following somewhat cryptic
ERROR message:
"utils.c: write() returned error: Broken pipe"
There's a few problems with this:
(1) It doesn't provide any context, other than 'something broke a pipe'
(2) As noted, it isn't actually an error in Asterisk
(3) It can get rather spammy if the thing breaking the pipe occurs often, such
as a FastAGI server
(4) Spammy ERROR messages make Asterisk appear to be having issues, or can even
mask legitimate issues
This patch changes ast_carefulwrite to only log an ERROR if we actually had one
that was reasonably under our control. For debugging purposes, we still emit
a debug message if we detect that the far side has stopped reading.
Change-Id: Ia503bb1efcec685fa6f3017bedf98061f8e1b566
pjproject < 2.5.0 will segfault on a tls transport if async_operations
is greater than 1. A runtime version check has been added to throw
an error if the version is < 2.5.0 and async_operations > 1.
To assist in the check, a new api "ast_compare_versions" was added
to utils which compares 2 major.minor.patch.extra version strings.
ASTERISK-25615 #close
Change-Id: I8e88bb49cbcfbca88d9de705496d6f6a8c938a98
Reported-by: George Joseph
Tested-by: George Joseph
Adds the TCP Keep Alive option to TCP and TLS server sockets. Previously
this option was only being set on session sockets.
http://www.tldp.org/HOWTO/html_single/TCP-Keepalive-HOWTO/
According to the link above, the SO_KEEPALIVE option is useful for knowing
when a TCP connected endpoint has severed communication without indicating
it or has become unreachable for some reason. Without this patch, keep
alive is not set on the socket listening for incoming TCP sessions and
in Komatsu's report this resulted in the thread listening for TCP becoming
stuck in a waiting state.
ASTERISK-25364 #close
Reported by: Hiroaki Komatsu
Change-Id: I7ed7bcfa982b367dc64b4b73fbd962da49b9af36
When the asterisk sending OriginateResponse message,
it doesn't set the "Uniqueid".
And it didn't support correct response message for
Application originate.
ASTERISK-25624 #close
Change-Id: I26f54f677ccfb0b7cfd4967a844a1657fd69b74d
Fixed a bug that originally would show a negative number of
active calls occuring in Asterisk. A gauge is persistent so
incrementing and decrementing it results in a more consistent
performance. Also changed to the call to StatsD to use
ast_statsd_log_string() so that a "+" could be sent to StatsD.
ASTERISK-25619 #close
Change-Id: Iaaeff5c4c6a46535366b4d16ea0ed0ee75ab2ee7
The default value was never set for audio_buffers, causing bad
audio quality. This ensures the default is always set.
ASTERISK-25569 #close
Change-Id: I2d2ee3e644120b0f9f6ea6ab9286d7d590942a44
Asterisk may crash when calling ast_channel_get_t38_state(c)
on a locked channel which is being hung up.
ASTERISK-25609 #close
Change-Id: Ifaa707c04b865a290ffab719bd2e5c48ff667c7b
Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
The current logic for ICE negotiation starts it
when receiving an SDP with ICE candidates. This is
incorrect as ICE negotiation can only start when each
call party have at least one pair of local and remote
candidate. Starting ICE negotiation early would result
in negotiation failure and ultimately no audio.
This change makes it so ICE negotiation is only started
when a response with SDP is received or when a response
with SDP is sent.
ASTERISK-24146
Change-Id: I55a632bde9e9827871b09141d82747e08379a8ca
See ASTERISK-25615.
If the transport protocol is tls and async_operations > 1, pjproject
will segfault if more than one operation is attempted on the same socket.
Until this is fixed upstream, a check has been added to throw an error
if a tls transport config has async_operations set to > 1.
ASTERISK-25615
Change-Id: I76b9a5b2a5a0054fe71ca5851e635f2dca7685a6
Reported-by: George Joseph
Tested-by: George Joseph
A crash happens sometimes when performing a CLI "sip reload". The bogus
peer gets refreshed while it is in use by a new call which can cause the
crash.
* Protected the global bogus peer object with an ao2 global object
container.
ASTERISK-25610 #close
Change-Id: I5b528c742195681abcf713c6e1011ea65354eeed
This reverts commit 6614babea2.
Unfortunately, using a bridge to manage T.38 state will cause severe deadlocks
in core_unreal/chan_local. Local channels attempt to reach across both their
peer and the peer's bridge to inspect T.38 state. Given the propensity of
Local channel chains, managing the locking situation in such a scenario is
practically infeasible.
Change-Id: Ic687397ffea08dfb899345a443bd990ec3d0416a
It will never be perfect or even pretty, mostly because of the differences
between static and dynamic contacts.
Created:
Can't use the contact or contact_status alloc functions
because the objects come and go regardless of the actual state.
Can't use the contact_apply_handler, ast_sip_location_add_contact or
a sorcery created handler because they only get called for dynamic
contacts. Similarly, permanent_uri_handler only gets called for
static contacts.
So, Matt had it right. :) ast_res_pjsip_find_or_create_contact_status is
the only place it can go and not have duplicated code. Both
permanent_uri_handler and contact_apply_handler call find_or_create.
Removed:
Can't use the destructors for the same reason as above. The only
place to put this is in persistent_endpoint_contact_deleted_observer
which I believe is the "correct" place but even that will handle only
dynamic contacts. This doesn't called on shutdown however. There is
no hook to use for static contacts that may be removed because of a
config change while asterisk is in operation.
I moved the cleanup of contact_status from ast_sip_location_delete_contact
to the handler as well.
Status Change and RTT:
Although they worked fine where they were (in update_contact_status) I
moved them to persistent_endpoint_contact_status_observer to make it
more consistent with removed. There was logic there already to detect
a state change.
Finally, fixed a nit in permanent_uri_handler rmudgett reported
eralier.
ASTERISK-25608 #close
Change-Id: I4b56e7dfc3be3baaaf6f1eac5b2068a0b79e357d
Reported-by: George Joseph
Tested-by: George Joseph
Beside that, the format-attribute module sends only non-default values in the
line fmtp, now. This avoids unnecessary overhead in SDP messages. Furthermore,
previously the parameter stereo was not parsed when being the first parameter.
ASTERISK-25583 #close
Change-Id: Iae85ba3e5960bfd5d51cf65bcffad00dd4875a73
This patch fixes a crash which would occur when an audiohook was
applied to a channel using an audio codec that could not be translated
to signed linear (such as when using pass-through codecs like OPUS or
when the codec translator module for the format in use is not loaded).
ASTERISK-25498 #close
Reported by: Ben Langfeld
Change-Id: Ib6ea7373fcc22e537cad373996136636201f4384
When 90d9a70789 was merged, it mostly tested dynamic contacts created as
a result of registering a PJSIP endpoint. Contacts generated in this
fashion typically have a long alphanumeric string as their object identifier,
which maps reasonably well for StatsD. Unfortunately, this doesn't work in the
general case. StatsD treats both '.' and ':' characters as special characters.
In particular, having a ':' appear in the middle of a StatsD metric will
result in the metric being rejected.
This causes some obvious issues with SIP URIs.
The StatsD API should not be responsible for escaping the metric name passed
to it. The metric is treated as a single long string, and it would be
challenging to know what to escape in the string passed to the function.
Likewise, we don't want to escape the metric in PJSIP, as that involves
overhead that is wasted when either res_statsd isn't loaded or enabled.
This patch takes an alternative approach. The Contact ID has been changed
to be "aor@@uri_hash" instead of "aor@@uri". This (a) won't contain any of the
aforementioned special characters, (b) can be done on Contact creation,
which has minimal impact on run-time performance, and (c) also conforms to an
earlier commit that changed the ID for dynamic contacts.
The downside of this is that StatsD users will have to map SHA1 hashes back to
the Contacts that are emitting the statistics. To that end, the CLI commands
have been updated to include the first 10 characters of the MD5 hash, which
should be enough to match what is shown in Graphite (or some other StatsD
backend).
ASTERISK-25595 #close
Change-Id: Ic674a3307280365b4a45864a3571c295b48a01e2
Reported-by: Matt Jordan
Tested-by: George Joseph
An earlier commit changed the id of dynamic contacts to contain
a hash instead of the uri. This patch updates status change
logging to show the aor/uri instead of the id. This required
adding the aor id to contact and contact_status and adding
uri to contact_status. The aor id gets added to contact and
contact_status in their allocators and the uri gets added to
contact_status in pjsip_options when the contact_status is
created or updated.
ASTERISK-25598 #close
Reported-by: George Joseph
Tested-by: George Joseph
Change-Id: I56cbec1d2ddbe8461367dd8b6da8a6f47f6fe511
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
According to the API doxygen a sched ID of 0 is valid. Unfortunately, 0
was never returned historically and several users incorrectly coded usage
of the returned sched ID assuming that 0 was invalid.
ASTERISK-25476
Change-Id: Ib19c7ebb44ec9fd393ef6646dea806d4f34e3a20
chan_sip.c:
* Initialize mwi subscription scheduler ids earlier because of ASTOBJ to
ao2 conversion.
* Initialize register scheduler ids earlier because of ASTOBJ to ao2
conversion.
chan_skinny.c:
* Fix more scheduler usage for the valid 0 id value.
ASTERISK-25476
Change-Id: If9f0e5d99638b2f9d102d1ebc9c5a14b2d706e95
channels/chan_iax2.c:
* Initialize struct chan_iax2_pvt scheduler ids earlier because of
iax2_destroy_helper().
channels/chan_sip.c:
channels/sip/config_parser.c:
* Fix initialization of scheduler id struct members. Some off nominal
paths had 0 as a scheduler id to be destroyed when it was never started.
chan_skinny.c:
* Fix some scheduler id comparisons that excluded the valid 0 id.
channel.c:
* Fix channel initialization of the video stream scheduler id.
pbx_dundi.c:
* Fix channel initialization of the packet retransmission scheduler id.
ASTERISK-25476
Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8
When 4875e5ac32 was merged, it fixed several issues with a direct media bridge
transitioning to handling a T.38 fax. However, it uncovered a race condition
caused by the bridging core. When a channel involved in a T.38 fax leaves a
bridge, the frame queued by the channel driver that should inform the far side
that it is no longer in a T.38 fax may not make it across the bridge. The
bridging framework is *extremely* aggressive in tearing down the bridge, and
control frames that are currently in flight *may* get dropped.
This patch adds a new module to the bridging framework, bridge_t38. This module
maintains some notion of the T.38 state for the two channels in a bridge. When
the bridge detects that it is being torn down or when one of the two channels
leaves, it informs the respective channel(s) that they should stop faxing. This
ensures that channels switch back to audio if they survive and are ejected out
of a bridge while faxing.
ASTERISK-25582
Change-Id: If5b0bb478eb01c4607c9f4a7fc17c7957d260ea0
