Both transport and endpoint now check for the existence and readability
of tls certificate and key files before passing them on to pjproject.
This will cause the object to not load rather than waiting for pjproject
to discover that there's a problem when a session is attempted.
NOTE: chan_sip also uses ast_rtp_dtls_cfg_parse but it's located
in build_peer which is gigantic and I didn't want to disturb it.
Error messages will emit but it won't interrupt chan_sip loading.
ASTERISK-25618 #close
Change-Id: Ie43f2c1d653ac1fda6a6f6faecb7c2ebadaf47c9
Reported-by: George Joseph
Tested-by: George Joseph
This patch fixes a crash which would occur when an audiohook was
applied to a channel using an audio codec that could not be translated
to signed linear (such as when using pass-through codecs like OPUS or
when the codec translator module for the format in use is not loaded).
ASTERISK-25498 #close
Reported by: Ben Langfeld
Change-Id: Ib6ea7373fcc22e537cad373996136636201f4384
Currently if a channel is transferred out of a bridge, the BRIDGEPEER
variable (also BRIDGEPVTCALLID) remain set even once the channel is
out of the bridge. This patch removes these variables when leaving
the bridge.
ASTERISK-25600 #close
Reported by: Mark Michelson
Change-Id: I753ead2fffbfc65427ed4e9244c7066610e546da
According to the API doxygen a sched ID of 0 is valid. Unfortunately, 0
was never returned historically and several users incorrectly coded usage
of the returned sched ID assuming that 0 was invalid.
ASTERISK-25476
Change-Id: Ib19c7ebb44ec9fd393ef6646dea806d4f34e3a20
channels/chan_iax2.c:
* Initialize struct chan_iax2_pvt scheduler ids earlier because of
iax2_destroy_helper().
channels/chan_sip.c:
channels/sip/config_parser.c:
* Fix initialization of scheduler id struct members. Some off nominal
paths had 0 as a scheduler id to be destroyed when it was never started.
chan_skinny.c:
* Fix some scheduler id comparisons that excluded the valid 0 id.
channel.c:
* Fix channel initialization of the video stream scheduler id.
pbx_dundi.c:
* Fix channel initialization of the packet retransmission scheduler id.
ASTERISK-25476
Change-Id: I07a3449f728f671d326a22fcbd071f150ba2e8c8
dns.c and dns_system_resolver.c were spitting out errors for lookup
failures for things like not finding a SRV record even though
there was an A record. Those have been changed to debug messages.
Logging not finding ANY record is left to the higher level caller.
Also, dns_system_resolver was using Windows line endings so I
converted them to Unix style. The actual log changes are on lines
156 and 159.
Change-Id: I65be16ea15304b96f9dcb4d289dbd3e2286fc094
Several issues are addressed here:
- main() is large, and half of it is only used if we're not rasterisk;
fixed by spliting up the daemon part into a separate function.
- Call ast_term_init from rasterisk as well.
- Remove duplicate code reading/writing asterisk history file.
- Attempt to tackle background color issues and color changes that
occur. Tested by starting asterisk -c until the colors stopped
changing at odd locations.
- Remove unused term_prep() and term_prompt() functions.
ASTERISK-25585 #close
Change-Id: Ib641a0964c59ef9fe6f59efa8ccb481a9580c52f
Because the context, extension, and application are stored in stringfields,
checking for them being NULL doesn't work so well. This patch uses the
appropriate string library call, ast_strlen_zero, to see if there is a value
in the context/exten/app values.
Change-Id: Ie09623bfdf35f5a8d3b23dd596647fe3c97b9a23
Previously, a trancoding module did not have access to the joint but cached
format. Therefore, the module did not have access to the attributes negotiated
via SDP (line fmtp). Now, a translation module receives the joint format.
ASTERISK-25545 #close
Change-Id: Id6878a989b50573298dab115d3371ea369e1a718
When dns_parse_answer_ex was iterating over the answers it
wasn't incrementing the answer pointer correctly after the first
answer. The result was that no answers after the first
were being returned. For results where multiple records should
have been sorted by priority, weight, etc., there was nothing
to sort so the only the first record was returned even if it
wouldn't have been the correct record based on the sort.
ASTERISK-25565 #close
Reported-by: Daniel Tryba
Tested-by George Joseph
Change-Id: I8622604fefdcd3c11e2c5609a6382e53b1467b0b
The hashtab API is pretty NULL tolerant which has resulted
in remaining callers not doing much checks themselves.
Unfortunately the function to destroy an iterator does not
do a NULL check and will result in a crash if passed NULL.
This change fixes that.
ASTERISK-25552 #close
Change-Id: Ic1bf8eec3639e5a440f1c941d3ae3893ac6ed619
In practical tests, we have seen certain taskprocessors, specifically
Stasis subscription taskprocessors, cross the recently-added high-water
mark and emit a warning. This high-water mark warning is only intended
to be emitted when things have tanked on the system and things are
heading south quickly. In the practical tests, the Stasis taskprocessors
sometimes had a max depth of 180 tasks in them, and Asterisk wasn't in
any danger at all.
As such, this ups the high-water mark to 500 tasks instead. It also
redefines the SIP threadpool request denial number to be a multiple of
the taskprocessor high-water mark.
Change-Id: Ic8d3e9497452fecd768ac427bb6f58aa616eebce
In Asterisk 13, cached formats are created before their corresponding format-
attribute module is registered. Cached formats are involved when a local
extension is called. Therefore, ast_format_generate_sdp_fmtp did not work
on local extensions. This change affects the Opus Codec, H.263 (Plus), H.264,
and format-attribute modules provided externally.
ASTERISK-25160 #close
Change-Id: I1ea1f0483e5261e2a050112e4ebdfc22057d1354
We have observed situations where the SIP threadpool may become
deadlocked. However, because incoming traffic is still arriving, the SIP
threadpool's queue can continue to grow, eventually running the system
out of memory.
This change makes it so that incoming traffic gets rejected with a 503
response if the queue is backed up too much.
Change-Id: I4e736d48a2ba79fd1f8056c0dcd330e38e6a3816
When appending all formats of a type all the codecs are iterated
and added. This operation was incorrectly adding the ast_format_none
format which is special in that it is supposed to be used when no
format is present. It shouldn't be appended.
ASTERISK-25535
Change-Id: I7b00f3bdf4a5f3022e483d6ece602b1e8b12827c
This change adds handling of dead worker threads when moving them
to be active. When this happens the worker thread is removed from
both the active and idle threads container. If no threads are able
to be moved to active then the pool grows as configured.
A unit test has also been added which thrashes the idle timeout
and thread activation to exploit any race conditions between the
two.
ASTERISK-25546 #close
Change-Id: I6c455f9a40de60d9e86458d447b548fb52ba1143
Previously, format-attribute modules relied on an existing fmtp line in SDP
negotiation. However, fmtp is optional for several formats like the Opus Codec.
Now, the format-attribute module is called with an empty fmtp, which allows the
module to initialise itself to RFC defaults. Furthermore now, Asterisk is able
to differentiate between internally and externally created formats.
ASTERISK-25537 #close
Change-Id: I28f680cef7fdf51c0969ff8da71548edad72ec52
ABI compatibility stubs existed for ast_app_separate_args and ast_verbose,
this is not needed in master.
Change-Id: I07b4d2c16079da3c2c6efa55df4a74368e0bd453
Since Asterisk 13, formats are immutable and cached. However while loading a
module like chan_sip, some formats were created instead using cached ones.
ASTERISK-25535 #close
Change-Id: I479cdc220d5617c840a98f3389b3bd91e91fbd9b
dns_parse_answer_ex was not converting ans->ttl from network
by order to host byte order which was causing certain ttls
it to go negative. In turn this was causing answer edit checks
to fail.
ASTERISK-25528 #close
Reported-by: Daniel Tryba
Tested-by: George Joseph
Change-Id: I31505132d6321c46d2f39fd06c20ee808a864037
Previously, the wrapping did both lookahead and lookback, which,
together with color escape sequences, caused some lines to be wrapped
way earlier than other lines. This led to inconsistent output.
This simplifies the wrapping code and makes it more sane: if maxcolumns
is hit, we simply jump back to the last space and wrap there.
ASTERISK-25527 #close
Change-Id: I56d01c6f9a812642b1b05535c98d4db48d17c957
If a taskprocessor's queue grows large, this can indicate that there
may be a problem with tasks not leaving the processor or else that
the number of available task processors for a given type of task is
too low. This patch makes it so that if a taskprocessor's task queue
grows above 100 queued tasks that it will emit a warning message.
Warning messages are emitted only once per task processor.
ASTERISK-25518 #close
Reported by: Jonathan Rose
Change-Id: Ib1607c35d18c1d6a0575b3f0e3ff5d932fd6600c
When a dial attempt is made that involves a requesting channel, we previously
were not:
a) Protecting access to the native format capabilities structure on the
requesting channel. That is inherently unsafe.
b) Reference bumping the lifetime of the format capabilities structure.
In both cases, something else could sneak in, blow away the format
capabilities, and we'd be holding onto an invalid format_cap structure. When
the newly created channel attempts to construct its format capabilities, things
go poorly.
This patch:
a) Ensures that we get a reference to the native format capabilities while
the requesting channel is locked
b) Holds a reference to the native format capabilities during the creation
of the new channel.
ASTERISK-25522 #close
Change-Id: I0bfb7ba8b9711f4158cbeaae96edf9626e88a54f
A previous commit reduced the AST_BUILDOPTS compiler define to
only include options that affected ABI. This included some options
that were previously displayed by cli "core show settings". This
change corrects the CLI display while still restricting buildopts.h
to ABI effecting options only.
ASTERISK-25434 #close
Reported by: Rusty Newton
Change-Id: Id07af6bedd1d7d325878023e403fbd9d3607e325
The JSON packing for the ContactStatusChange event forgot to include the
roundtrip_usec field. As a result, the field never showed up in any event,
even when the data was available. This patch corrects that error by properly
packing the JSON blob with the data.
Change-Id: I8df80da659a44010afbd48f645967518ff5daa17
A crash was seen on a system that ran out of memory due to Asterisk not
checking for vector allocation failures in format_cap.c. With this
change, if either of the AST_VECTOR_INIT calls fail, we will return a
value indicating failure.
Change-Id: Ieb9c59f39dfde6d11797a92b45e0cf8ac5722bc8
Users of functions which call __ast_str_helper() such as the ones listed
below are likely to not check the return value for failure so ensuring
that the string is always nil terminated is a good safety measure.
ast_str_set_va()
ast_str_append_va()
ast_str_set()
ast_str_append()
Change-Id: I36ab2d14bb6015868b49329dda8639d70fbcae07
In September 2006, the maximum packetization time (ptime) were set to such a
low value, packetization was disabled for many codecs actually. This was fixed
for many codecs but not for iLBC 30. This enables packetization for iLBC which
can be enabled for example via allow=ilbc:60,gsm,alaw,ulaw in the file sip.conf.
ASTERISK-7803
Change-Id: I2ef90023d35efb7cb8fe96ed74f53f6846ffad12
This patch adds the functions
ast_cdr_modifier_register()
ast_cdr_modifier_unregister()
That work much like ast_cdr_register() and ast_cdr_unregister().
Modules registered will be given a chance to modify (or to do whatever
they want) CDR fields just before they are passed to registered engines.
Thus, for instance, if a module change the "userfield" field of a CDR,
the modified value will be passed to every registered CDR backend for
logging.
ASTERISK-25479 #close
Change-Id: If11d8fd19ef89b1a66ecacf1201e10fcf86ccd56
The memory corruption could happen if the [section](+) is the last section
in the file with trailing comments. In this case process_text_line() has
left *last_cat is set to newcat and newcat is destroyed.
Change-Id: I0d1d999f553986f591becd000e7cc6ddfb978d93
