SIP responses over WebSockets when the client is using IPv6 have invalid
Via headers according to RFC 3261. The 'received' header parameter
should not be wrapped in brackets if it is an IPv6 address.
When src_name is populated by the built-in PJSIP transports, the code
uses pj_sockaddr_print() with 'flags' set to 0, meaning that the
brackets are not rendered around IPv6 addresses.
This may be related to ASTERISK~27101.
See also: https://github.com/onsip/SIP.js/pull/594
ASTERISK-28020 #close
Change-Id: I8ea9d289901b837512bee2ca2535e3dc14f04d77
This new option can be passed for ./configure or
./tests/CI/buildAsterisk.sh to prevent download/install of binary
modules.
Normally enabling the categories MENUSELECT_CODECS or MENUSELECT_RES
will result in binary modules being enabled even if the build target is
incompatible with those modules. This includes CI scripts which enable
categories before disabling specific modules.
If more binary modules are offered in the future this will help avoid
accidentally downloading them if unwanted or incompatible. Adding a
binary module will only require creating a new menuselect entry similar
to the existing ones, it will not be necessary to modify the CI scripts.
Change-Id: I6b1bd1c75a2e48f05b8b8a45b7a7a2d00a079166
The realtime text timer pops regularly and sends text frames even if
the buffer is empty. This causes a lot of unecessary debug logging.
* Made red_write() test if we need to send a frame before calling
ast_rtp_write()
ASTERISK-28002
Reported by: Emmanuel BUU
Tested by: Emmanuel BUU
Change-Id: Icf81310c3b8080b615a42060afc02ab41f9523dd
When a Contact is updated the only material change that qualify
support cares about is the underlying configuration for the AOR.
In this case we will update things with the new AOR information but
otherwise the callback to indicate the Contact has changed can be
ignored.
This is because it is only when a Contact is added or deleted that
material changes occur within the qualify support. An update can't
change the URI since it would result in a new Contact so it can be
ignored.
Change-Id: I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d
We were still getting crashes after the first fix. Somehow we receive a
non-2xx final response before we get a 200 final response. With the
failure response we had already cleaned up and destroyed some data
structures. When the unexpected 200 response comes in we crash.
* Add protection code to prevent processing another final T.38 reINVITE
response.
ASTERISK-27944
Change-Id: I8b5baba8d07fe4d63f0d7d05d3eb9a3d27d40a74
The allow_unqualified_fetch option for the sorcery realtime backend
blocked actually fetching all rows when the option is set to warn.
* Made issue a warning and actually do the request when
allow_unqualified_fetch=warn is set.
Change-Id: I74456c80a03a62dce66fc3dc3cb0cf2351ac4312
Compiling without SRTP support installed resulted in some unused variable
warnings. These warnings also showed that the srtp variable was obtained
and passed around some functions but not really used even when a system
has SRTP installed.
Change-Id: I6daad34be3e89b19adef6e2fbe738018975155fc
If in the initial sdp the caller doesn't include the line
a=rtcp-mux
Then asterisk shoud not include rtcp-mux in the response regardless
of rtcp-mux being enabled on the endpoint
ASTERISK-28007 #close
Change-Id: I58e9b9f40a139afc0da5de41906cc608fb62adc7
sip_options_get_endpoint_state_compositor_state leaked a reference to
the first available endpoint state compositor that was found.
Change-Id: Idb6be19f7219b6eed1dfb19c1e740dd40cb3fdc7
This change adds the "party" parameter to the Remote-Party-ID header
which indicates which party the header information is applicable
to. In Asterisk this is determined on whether we are the calling
or called party. This is added to improve interoperability with some
implementations.
ASTERISK-28006
Change-Id: I1eec3e377ffff8633b5c1dd59a05e9533122cfca
When a conference contained a mixture of audio/video and audio-only
users, a NOTICE message would pop up stating there are no joint
capabilities between streams. This happens because streams can never be
removed, but they can be in a REMOVED state. If we have the scenario
where user A joins with audio/video, user B joins with audio-only, and
user C joins with audio/video, then user A leaves, the message would
be triggered. That removed stream is still in the SDP, but Asterisk
would pass it through, causing it to be seen as a ulaw stream. A check
has been added for removed streams, setting their status to REMOVED when
handling negotiated SDPs.
Also addressed an issue where user A joins, then user B joins but does
not receive video until much later. Full frames were not being sent,
causing some PLI from the browser. Because the video was flowing in one
direction, the browser sets the SSRC to 1, but Asterisk was dropping the
PLI because of that. Added a check to see if the SSRC is 1 or not, which
sends full frames and allows video to flow between user A and user B.
This should only happen when dealing with PSFB or FUR, and in the case
of PSFB, only for PLI.
ASTERISK-27398
Change-Id: I26e7c6f101bc119549eeca406b5bcd25ad8ebc5e
The authors of PJProject undef s_addr because of some issue in Microsoft
Windows. However in Oracle Solaris, s_addr is not a structure member, but
defined to map to the real structure member.
Updates the patch from ASTERISK_20366
ASTERISK-27997
Change-Id: I8223026d4d54e2a46521085fcc94bfa6ebe35b11
* Don't include pjlib.h twice in res_pjsip.h
* Consistently use #include <> form for pjproject includes.
(pjsip.h and pjlib.h)
Change-Id: I3f7b42044840de64edf7e9d7695cb60c45990dc7
If asterisk offer an endpoint with SRTP and that endpoint respond
with non srtp, in that case channel(rtp,secure,audio) reply wrong
status.
Why delete flag AST_SRTP_CRYPTO_OFFER_OK while check identical remote_key:
Currently this flag has being set redundantly. In either case identical
or different remote_key this flag has being set. So if we
don't set it while we receive identical remote_key or non SRTP SDP
response then we can take decision of srtp use by using that flag.
ASTERISK-27999
Change-Id: I29dc2843cf4e5ae2604301cb4ff258f1822dc2d7
This change removes a sorcery lookup for retrieving all
contacts at the end of the registration process by keeping
track of the contacts that are added/updated/deleted.
This ensures at the end of the process the container of
contacts we have is the current state.
Pool usage has also been reduced by allocating one for
usage throughout the handling of a REGISTER and resetting
it to a clean state. This ensures that in most cases
we allocate once and just reuse it.
ASTERISK-28001
Change-Id: I1a78b2d46f9a2045dbbff1a3fd6dba84b612b3cb
This patch adds regular expression support to make the identify section's
match_header option more useful when attempting to match complex headers
like the 'To' or 'From' headers. The 'From' header has variable
components such as the tag parameter that you cannot predict. To specify
a regular expression put slashes around the regular expression in place of
the header value.
[identify-alice]
type=identify
endpoint=alice
match_header=From: /<sip:alice@127\\.0\\.0\\.1>/
* Added regex support to match_header so you could match a 'To' header
among other complex headers.
Fixed reported crashes when trying to match special headers like 'Contact'.
The identify section's match_header method used code that assumed you were
matching a generic header. Any other type of header could cause a crash
if the header structure variant did not match the generic header enough.
* Made use code that will work for any header type instead of code
specific to generic headers.
Other fixes while in the area:
* Made check all headers of the requested name.
* Added some more sanity checks to the configured identify matching
options when applying the configuration.
ASTERISK-27548
Change-Id: I27dfd4ff5e2259b906640e3c330681b76b4ed1f1
The alembic for the PJSIP subscription persistence table has the
"prune_on_boot" field as a boolean. While in Asterisk we are
tolerant of many different definitions of true and false in the
database we only accept "yes" and "no". This change makes the
field treated as a yes/no instead of an integer, thus storing
"yes" and "no" instead of "1" and "0".
Change-Id: Ic8b9211b36babefe78f70def6828a135a6ae7ab6
OpenSSL is an optional external library and should stay optional even when
Developer Mode is configured.
ASTERISK-27990
Change-Id: Ia68a4cd5474b26d45e0f43b04032ad598022853b
When realtime text packets are to be sent, the text is accumulated in a
buffer and sent regularly by a timer. It can happen that commands such as
a backspace, CR, or LF get merged with regular text. This breaks some
UAs.
The proposed change:
* We test if the current packet contains a command. If so we send the
buffer immediately.
* We test if the buffer contained a command. If so we send the buffer
immediately.
* We accumulate the text (or the command) in the buffer.
ASTERISK-27970
Change-Id: Ifbe993311410fa855cb8aa4a12084db75f413462
If a SIP MESSAGE is triggered for an endpoint that is currently not registered
- and therefore has no valid contact associated - an error message was logged.
Since this is a valid request in a valid use cases this is now changed to a
warning, as discussed with Matt Fredrickson on the asterisk-dev mailing list.
Change-Id: I55eb62d2712818a58c7532119dec288bd98cf0c0
A change recently went in which disabled the built-in PJSIP
keepalive. This defaulted to 90 seconds and kept TCP/TLS
connections alive. Disabling this functionality has resulted
in a behavior change of not doing keepalives by default resulting
in TCP/TLS connections dropping for some people.
This change makes our default keepalive interval 90 seconds
to match the previous behavior and preserve it.
ASTERISK-27978
Change-Id: Ibd9a45f3cbe5d9bb6d2161268696645ff781b1d6
* Use the replacement function ast_sip_push_task_wait_servant() instead of
the deprecated ast_sip_push_task_synchronous().
Change-Id: I145b550ba7054640c7faa3b644e63137f505c612
Support has been added for receiving a NACK request and handling it.
Now, Asterisk can detect when a NACK request should be sent and knows
how to construct one based on the packets we've received from the remote
end. A buffer has been added that will store out of order packets until
we receive the packet we are expecting. Then, these packets are handled
like normal and frames are queued to the core like normal. Asterisk
knows which packets to request in the NACK request using a vector
which stores the sequence numbers of the packets we are currently missing.
If a missing packet is received, cycle through the buffer until we reach
another packet we have not received yet. If the buffer reaches a certain
size, send a NACK request. If the buffer reaches its max size, queue all
frames to the core and wipe the buffer and vector.
According to RFC3711, the NACK request must be sent out in a compound
packet. All compound packets must start with a sender or receiver
report, so some work was done to refactor the current sender / receiver
code to allow it to be used without having to also include sdes
information and automatically send the report.
Also added additional functionality to ast_data_buffer, along with some
testing.
For more information, refer to the wiki page:
https://wiki.asterisk.org/wiki/display/AST/WebRTC+User+Experience+Improvements
ASTERISK-27810 #close
Change-Id: Idab644b08a1593659c92cda64132ccc203fe991d
