https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r296352 | marquis | 2010-11-26 13:19:02 -0500 (Fri, 26 Nov 2010) | 12 lines
Fix reloading of peer when a user is requested.
Prevent peer reloading from causing multiple MWI subscriptions to be created when using realtime. This had the effect of sending one NOTIFY for every time a sip peer made a call, in one case eventually overwhelming the phone and causing it to reboot.
(closes issue #18342)
Reported by: nivek
Patches:
issue0018342p1.patch uploaded by nivek (license 636)
Tested by: nivek
Review: https://reviewboard.asterisk.org/r/1029/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r296167 | rmudgett | 2010-11-24 16:49:48 -0600 (Wed, 24 Nov 2010) | 57 lines
Merged revisions 296166 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r296166 | rmudgett | 2010-11-24 16:42:45 -0600 (Wed, 24 Nov 2010) | 50 lines
Merged revisions 296165 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r296165 | rmudgett | 2010-11-24 16:41:07 -0600 (Wed, 24 Nov 2010) | 43 lines
Oneway audio to SIP phone from FXS port after FXS port gets a CallWaiting pip.
The FXS connected phone has to have CW/CID support to fail, as it will
send back a DTMF 'A' or 'D' when it's ready to receive CallerID. A normal
phone with no CID never fails. Also the SIP phone does not hear MOH when
the CW call is answered.
The DTMF end frame is suppressed when the phone acknowledges the CW signal
for CID. The problem is the DTMF begin frame needs to be suppressed as
well. The DTMF begin frame is causing SIP to start sending the DTMF RTP
frames. Since the DTMF end frame is suppressed, SIP will not stop sending
those DTMF RTP packets.
* Suppress the DTMF begin and end frames when the channel driver is
looking for DTMF digits.
* Fixed a couple issues caused by not cleaning up the CID spill if you
answer the CW call while it is sending the CID spill.
* Fixed not sending CW/CID spill to the phone when the call is natively
bridged. (Fixed by not using native bridge if CW/CID is possible.)
* Suppress received audio when sending CW/CID spills. The other parties
involved do not need to hear the CW/CID spills and may be confused if the
CW call is for them.
(closes issue #18129)
Reported by: alecdavis
Patches:
issue_18129_v1.8_v3.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
NOTE:
* v1.4 does not have the main problem fixed by suppressing the DTMF start
frames. The other three items fixed are relevant.
* If you really must restore native bridging between analog ports, you
need to disable CW/CID either by configuring chan_dahdi.conf
callwaitingcallerid=no or dialing *70 before dialing the number to
temporarily disable CW.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@296168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295747 | rmudgett | 2010-11-19 21:11:15 -0600 (Fri, 19 Nov 2010) | 13 lines
One way audio before answering call waiting call on analog port.
* Analog call waiting Caller ID spills could get stuck resulting in one
way audio until the waiting call is answered. This only happens on the
second (and later) call waiting call if the active call is not the first
call.
* The CLI/AMI "dahdi show channel" command could report the wrong channel
information.
Must keep the struct analog_pvt.owner and struct dahdi_pvt.owner pointer
in sync.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295748 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r295516 | rmudgett | 2010-11-19 10:47:11 -0600 (Fri, 19 Nov 2010) | 13 lines
Bring sig_analog extraction more into alignment with orig-trunk/v1.6.2 chan_dahdi.
* Restore SMDI support.
* Fixed initial value of struct analog_pvt.use_callerid. It may get
forced on depending upon other config options.
* Call analog_dnd() instead of manual inlined code.
* Removed unused struct analog_pvt.usedistinctiveringdetection.
* Removed the struct analog_pvt.unknown_alarm flag. It was really the
struct analog_pvt.inalarm flag.
* Use ast_debug() instead of ast_log(LOG_DEBUG).
* Rename several function's index variable to idx.
* Some formatting tweaks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@295517 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294823 | rmudgett | 2010-11-11 20:45:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294822 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294822 | rmudgett | 2010-11-11 20:44:12 -0600 (Thu, 11 Nov 2010) | 18 lines
Merged revisions 294821 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294821 | rmudgett | 2010-11-11 20:41:13 -0600 (Thu, 11 Nov 2010) | 11 lines
Asterisk is getting a "No D-channels available!" warning message every 4 seconds.
Asterisk is just whining too much with this message: "No D-channels
available! Using Primary channel XXX as D-channel anyway!".
Filtered the message so it only comes out once if there is no D channel
available without an intervening D channel available period.
(closes issue #17270)
Reported by: jmls
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294824 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r294734 | jpeeler | 2010-11-11 15:58:25 -0600 (Thu, 11 Nov 2010) | 32 lines
Merged revisions 294733 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r294733 | jpeeler | 2010-11-11 15:57:22 -0600 (Thu, 11 Nov 2010) | 25 lines
Merged revisions 294688 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r294688 | jpeeler | 2010-11-11 15:12:27 -0600 (Thu, 11 Nov 2010) | 18 lines
Fix problem with qualify option packets for realtime peers never stopping.
The option packets not only never stopped, but if a realtime peer was not in
the peer list multiple options dialogs could accumulate over time. This
scenario has the potential to progress to the point of saturating a link just
from options packets. The fix was to ensure that the poke scheduler checks to
see if a peer is in the peer list before continuing to poke. The reason a peer
must be in the peer list to be able to properly manage an options dialog is
because otherwise the call pointer is lost when the peer is regenerated from
the database, which is how existing qualify dialogs are detected.
(closes issue #16382)
(closes issue #17779)
Reported by: lftsy
Patches:
bug16382-3.patch uploaded by jpeeler (license 325)
Tested by: zerohalo
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294735 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294349 | rmudgett | 2010-11-09 10:55:32 -0600 (Tue, 09 Nov 2010) | 17 lines
Analog lines do not transfer CONNECTED LINE or execute the interception macros.
Add connected line update for sig_analog transfers and simplify the
corresponding sig_pri and chan_misdn transfer code.
Note that if you create a three-way call in sig_analog before transferring
the call, the distinction of the caller/callee interception macros make
little sense. The interception macro writer needs to be prepared for
either caller/callee macro to be executed. The current implementation
swaps which caller/callee interception macro is executed after a three-way
call is created.
Review: https://reviewboard.asterisk.org/r/996/
JIRA ABE-2589
JIRA SWP-2372
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294351 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r294125 | rmudgett | 2010-11-08 11:16:01 -0600 (Mon, 08 Nov 2010) | 33 lines
valgrind reported references to freed memory during a mISDN hangup collision.
Bad things have been happening in chan_misdn because the chan_misdn
channel private struct chan_list is not protected from reentrancy. Hangup
collisions have be causing read and write accesses to freed memory.
Converted chan_misdn struct chan_list to an ao2 object for its reference
counting feature.
**********
Removed an impediment to converting chan_list to an ao2 object.
The use of the other_ch member in chan_list is shaky at best. It is set
if the incoming and outgoing call legs are mISDN. The use of the other_ch
member goes against the Asterisk architecture and can even cause problems.
1) It is used to disable echo cancellation. This could be bad if the call
is forked and the winning call leg is not mISDN or the winning call leg is
not the last mISDN channel called by the fork. The other_ch would become
a dangling pointer.
2) It is used when the far end is alerting to hear the far end's inband
audio instead of Asterisk's generated ringback tone. This is bad if the
call is forked. You would only hear the last forked mISDN channel and it
may not be ringing yet.
The other_ch would become a dangling pointer if the call is later
transferred.
**********
JIRA SWP-2423
JIRA ABE-2614
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294127 65c4cc65-6c06-0410-ace0-fbb531ad65f3
RFC3261 section 12 about dialog creation says an INVITE transaction
results in an established dialog once it receives the 200 OK response.
It is possible to receive multiple differing 200 OK responses for a
single outbound INVITE Request, and this should result in establishing
multiple dialogs.
This patch allows for all differing 200 OK responses to an INVITE request
to establish a separate dialog, but only the first dialog is kept. All other
resulting dialogs from the initial request are immediately ACKed and then
immediately terminated with a BYE request.
Review: https://reviewboard.asterisk.org/r/946/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@294083 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293803 | twilson | 2010-11-03 11:05:14 -0700 (Wed, 03 Nov 2010) | 25 lines
Avoid valgrind warnings for ast_rtp_instance_get_xxx_address
The documentation for ast_rtp_instance_get_(local/remote)_address stated that
they returned 0 for success and -1 on failure. Instead, they returned 0 if the
address structure passed in was already equivalent to the address instance
local/remote address or 1 otherwise. 90% of the calls to these functions
completely ignored the return address and passed in an uninitialized struct,
which would make valgrind complain even though the operation was technically
safe.
This patch fixes the documentation and converts the get_xxx_address functions
to void since all they really do is copy the address and cannot fail.
Additionally two new functions
(ast_rtp_instance_get_and_cmp_(local/remote)_address) are created for the 3
times where the return value was actually checked. The
get_and_cmp_local_address function is currently unused, but exists for the sake
of symmetry.
The only functional change as a result of this change is that we will not do an
ast_sockaddr_cmp() on (mostly uninitialized) addresses before doing the
ast_sockaddr_copy() in the get_*_address functions. So, even though it is an
API change, it shouldn't have a noticeable change in behavior.
Review: https://reviewboard.asterisk.org/r/995/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293807 | rmudgett | 2010-11-03 13:35:19 -0500 (Wed, 03 Nov 2010) | 34 lines
Merged revisions 293806 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293806 | rmudgett | 2010-11-03 13:31:57 -0500 (Wed, 03 Nov 2010) | 27 lines
Merged revisions 293805 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293805 | rmudgett | 2010-11-03 13:23:04 -0500 (Wed, 03 Nov 2010) | 20 lines
Party A in an analog 3-way call would continue to hear ringback after party C answers.
All parties are analog FXS ports.
1) A calls B.
2) A flash hooks to call C.
3) A flash hooks to bring C into 3-way call before C answers. (A and B hear ringback)
4) C answers
5) A continues to hear ringback during the 3-way call. (All parties can hear each other.)
* Fixed use of wrong variable in dahdi_bridge() that stopped ringback on
the wrong subchannel.
* Made several debug messages have more information.
A similar issue happens if B and C are SIP channels. B continues to hear
ringback. For some reason this only affects v1.8 and trunk.
* Don't start ringback on the real and 3-way subchannels when creating the
3-way conference. Removing this code is benign on v1.6.2 and earlier.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r293648 | rmudgett | 2010-11-02 16:29:25 -0500 (Tue, 02 Nov 2010) | 20 lines
Merged revisions 293647 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r293647 | rmudgett | 2010-11-02 16:26:30 -0500 (Tue, 02 Nov 2010) | 13 lines
Merged revisions 293639 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r293639 | rmudgett | 2010-11-02 16:24:13 -0500 (Tue, 02 Nov 2010) | 6 lines
Make warning message have more useful information in it.
Change "Unable to get index, and nullok is not asserted" to "Unable to get
index for '<channel-name>' on channel <number> (<function>(), line
<number>)".
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293530 | rmudgett | 2010-11-01 12:29:30 -0500 (Mon, 01 Nov 2010) | 10 lines
Analog 3-way call would not connect all parties if one was using sig_pri.
Also the "dahdi show channel" would not show the correct 3-way call
status.
* Synchronized the inthreeway flag between chan_dahdi and sig_analog.
* Fixed a my_set_linear_mode() sign error and made take an analog sub
channel enum.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293531 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r293305 | jpeeler | 2010-10-29 16:48:38 -0500 (Fri, 29 Oct 2010) | 9 lines
Modify sip_setoption to not complain about unknown options.
This now behaves just like the other setoption callbacks. For the curious the
offending option for the reporter was AST_OPTION_CHANNEL_WRITE which was getting
passed due to a fix for chan_local in 286189.
(closes issue #17985)
Reported by: globalnetinc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@293306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292868 | dvossel | 2010-10-25 14:07:50 -0500 (Mon, 25 Oct 2010) | 39 lines
Merged revisions 292867 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r292867 | dvossel | 2010-10-25 14:06:21 -0500 (Mon, 25 Oct 2010) | 32 lines
Merged revisions 292866 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r292866 | dvossel | 2010-10-25 14:05:07 -0500 (Mon, 25 Oct 2010) | 27 lines
This patch turns chan_local pvts into astobj2 objects.
chan_local does some dangerous things involving deadlock avoidance.
tech_pvt functions like hangup and queue_frame are provided with a
locked channel upon entry. Those functions are completely safe as
long as you don't attempt to give up that channel lock, but that is
impossible to guarantee due to the required deadlock avoidance necessary
to lock both the tech_pvt and both channels involved.
In the past, we have tried to account for this by doing things like
setting a "glare" flag that indicates what function should destroy the
pvt. This was used in local_hangup and local_queue_frame to decided
who should destroy the pvt if they collided in separate threads. I
have removed the need to do this by converting all chan_local tech_pvts
to astobj2. This means we can ref a pvt before deadlock avoidance
and not have to worry about that pvt possibly getting destroyed under
us. It also cleans up where we destroy the tech_pvt. The only unlink
from the tech_pvt container occurs in local_hangup now, which is where
it should occur.
Since there still may be thread collisions on some functions like
local_hangup after deadlock avoidance, I have added some checks to detect
those collisions and exit appropriately. I think this patch is going to
solve quite a bit of weirdness we have had with local channels in the past.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292869 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r292787 | lmadsen | 2010-10-22 16:28:43 -0500 (Fri, 22 Oct 2010) | 21 lines
Merged revisions 292786 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r292786 | lmadsen | 2010-10-22 16:16:12 -0500 (Fri, 22 Oct 2010) | 13 lines
Update the LDIF file for LDAP.
The LDIF file asterisk.ldif was quite a bit out of date from the asterisk.ldap-schema file, so I've
now updated that to be in sync. The asterisk.ldif file being out of sync was a problem on my systems
where I was doing an ldapadd to import the schema into the LDAP database, and the existing file
would cause problems and ERROR messages when registering.
Additional documention has been added based on feedback in the issue I'm closing.
(closes issue #13861)
Reported by: scramatte
Patches:
ldap-update.txt uploaded by lmadsen (license 10)
Tested by: lmadsen, jcovert, suretec, rgenthner
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292788 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292704 | rmudgett | 2010-10-22 10:47:08 -0500 (Fri, 22 Oct 2010) | 19 lines
Connected line is not updated when chan_dahdi/sig_pri or chan_misdn transfers a call.
When a call is transfered by ECT or implicitly by disconnect in sig_pri or
implicitly by disconnect in chan_misdn, the connected line information is
not exchanged. The connected line interception macros also need to be
executed if defined.
The CALLER interception macro is executed for the held call.
The CALLEE interception macro is executed for the active/ringing call.
JIRA ABE-2589
JIRA SWP-2296
Patches:
abe_2589_c3bier.patch uploaded by rmudgett (license 664)
abe_2589_v1.8_v2.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/958/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292489 | rmudgett | 2010-10-20 20:02:50 -0500 (Wed, 20 Oct 2010) | 7 lines
Send CONNECT_ACKNOWLEDGE for CIS calls too.
The originator of the Q.SIG call completion signaling link was not changed
to the active state when the CONNECT message came in. The T309 processing
would immediately kill the signaling link because it was not in the active
state.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r292309 | twilson | 2010-10-19 12:27:32 -0700 (Tue, 19 Oct 2010) | 10 lines
Add sip show peer info about crypto and remove dated comment
This patch adds information about the encryption setting to 'sip show
peers' and removes an out-of-date comment from res_srtp.c and instead
directs users to the proper documentation.
(closes issue #18140)
Reported by: chodorenko
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@292310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291827 | dvossel | 2010-10-14 16:27:42 -0500 (Thu, 14 Oct 2010) | 18 lines
Safer xml parsing, treat all clients the same, and better local candidate selection.
The gtalk channel driver was doing several unsafe operations
in regards to how it parsed incoming XML messages. I have cleaned
that code up so it should be much safer now.
We now treat all clients types the same. We have no reason to
distinguish between GMAIL and GOOGLE VOICE clients anymore because
they all work the same way.
I also modified how the local ip is found. If no bindaddress is provided
in the config file, we attempt to determine the local ip we
would use to connect to google.com. If that fails, then
we fall back to the ast_find_ourip() function as a last resort.
Using the new method makes it much less likely that we would ever
advertise a local RTP candidate as a loopback address.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291828 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291758 | pabelanger | 2010-10-14 11:15:12 -0400 (Thu, 14 Oct 2010) | 11 lines
Add the ability for ast_find_ourip to return IPv4, IPv6 or both.
While testing chan_gtalk I noticed jabber was using my IPv6 address
and not IPv4. When using bindaddr=0.0.0.0 it is possible for ast_find_ourip()
to return both IPv6 and IPv4 results. Adding a family parameter gives you
the ablility to choose.
Since jabber/gtalk/h323 do not support IPv6, we should only return IPv4 results.
Review: https://reviewboard.asterisk.org/r/973/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291760 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291656 | rmudgett | 2010-10-13 18:45:11 -0500 (Wed, 13 Oct 2010) | 34 lines
Merged revisions 291655 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r291655 | rmudgett | 2010-10-13 18:36:50 -0500 (Wed, 13 Oct 2010) | 27 lines
Merged revisions 291643 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r291643 | rmudgett | 2010-10-13 18:29:58 -0500 (Wed, 13 Oct 2010) | 20 lines
Deadlock between dahdi_exception() and dahdi_indicate().
There is a deadlock between dahdi_exception() and dahdi_indicate() for
analog ports. The call-waiting and three-way-calling feature can
experience deadlock if these features are trying to do something and an
event from the bridged channel happens at the same time.
Deadlock avoidance code added to obtain necessary channel locks before
attemting an operation with call-waiting and three-way-calling.
(closes issue #16847)
Reported by: shin-shoryuken
Patches:
issue_16847_v1.4.patch uploaded by rmudgett (license 664)
issue_16847_v1.6.2.patch uploaded by rmudgett (license 664)
issue_16847_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
Review: https://reviewboard.asterisk.org/r/971/
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291658 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291541 | rmudgett | 2010-10-13 15:21:02 -0500 (Wed, 13 Oct 2010) | 26 lines
The chan_dahdi faxdetect option only works for the first FAX call.
The chan_dahdi faxdetect option only works for the first call. After that
the option no longer works. The struct dahdi_pvt.callprogress member is
the encoded user config setting for the callprogress and faxdetect config
options. Changing this value alters the configuration for all following
calls until the chan_dahdi.conf file is reloaded.
* Fixed the chan_dahdi ast_channel_setoption callback to not change the
users faxdetect config setting except for the current call.
* Fixed the chan_dahdi ast_channel_queryoption callback to read the active
DSP setting of the faxdetect option.
* Made actually disable the active faxdetect DSP setting for the current
call on the analog port. my_handle_dtmfup() is used for normal analog
ports. dahdi_handle_dtmfup() is the legacy code and is no longer used
unless in a radio mode.
(closes issue #18116)
Reported by: seandarcy
Patches:
issue18116_v1.8.patch uploaded by rmudgett (license 664)
Review: https://reviewboard.asterisk.org/r/972/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291542 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r291507 | rmudgett | 2010-10-13 14:01:48 -0500 (Wed, 13 Oct 2010) | 18 lines
Merged revision 291504 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r291504 | rmudgett | 2010-10-13 13:30:21 -0500 (Wed, 13 Oct 2010) | 11 lines
Hold off ast_hangup() from destroying the ast_channel.
Must get the ast_channel lock before proceeding with release_chan() and
release_chan_early() to hold off ast_hangup() from destroying the
ast_channel.
Missed this change for -r291468.
JIRA ABE-2598
JIRA SWP-2317
..........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291508 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r291192 | dvossel | 2010-10-11 16:38:39 -0500 (Mon, 11 Oct 2010) | 19 lines
Gtalk enhancements and general code cleanup.
This patch includes several chan_gtalk enhancements.
Two new gtalk.conf options have been added, externip
and stunadd. Setting externip allows us to
manually specify what the external IP address is
outside of a NAT environment. Setting the stunaddr
option to a valid stun server allows for that external
ip to be retrieved via a STUN server automatically. This
external IP is then advertised during call setup as
a possible candidate.
I have also attempted to clean up chan_gtalk's code
so it meets our coding guidelines. During this cleanup
I noticed several things that need to be done in the
code and made a TODO section at the top of the file.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@291193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290973 | dvossel | 2010-10-08 15:44:59 -0500 (Fri, 08 Oct 2010) | 12 lines
Make outbound Google Voice calls.
This patch allows for outbound Google Voice calls to be
dialed from Asterisk using chan_gtalk. Below is an example
dialstring.
exten -> blah,1,Dial(Gtalk/asterisk/+15552225555@voice.google.com,,)
In this example, 'asterisk' is the jabber.conf profile configured
to connect to your gmail account. In order to receive Google Voice
calls make sure to enable 'allowguest=yes' in gtalk.conf.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290974 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r290829 | dvossel | 2010-10-07 17:38:05 -0500 (Thu, 07 Oct 2010) | 6 lines
Add Philippe Sultan to chan_gtalk author list.
Philippe has made some notable contributions to the
gtalk channel driver. His name deserves to be listed
amoung the authors of that file. Thanks Philippe!
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@290831 65c4cc65-6c06-0410-ace0-fbb531ad65f3
