The pjsua and pjsystest apps are now built only if TEST_FRAMEWORK is set.
The python bindings are now built only if TEST_FRAMEWORK is set and a
python development package is installed.
libresample was also disabled.
ASTERISK-25993 #close
Reported-by: Joshua Colp
Change-Id: If4e91c503a02f113d5b71bc8b972081fa3ff6f03
For all OSes:
* Disabled third-party codecs in pjproject and added
'--disable-speex-codec --disable-speex-aec --disable-gsm-codec' to the
configure options since we don't use the pjsip codec capability.
FreeBSD:
* Added FreeBSD support to install_prereq.
* Changed pjproject/configure.m4 to use $GNU_MAKE instead of hardcoding "make".
* Added __progname and environ to asterisk.exports.in.
* Reverted the use of ldconfig to create shared library symlinks to ln.
* Only enable epoll in pjproject if `uname -s` is Linux.
* Added a patch to pjproject to take the name of the 'make' command from
an environment variable if supplied. This is needed for the python bindings.
(merged by Teluu into pjproject trunk 5/3/2016)
FreeBSD support isn't complete. Still some general issues regarding
make/gmake having nothing to do with pjproject. With some handholding it DOES
build successfully.
CentOS:
Added 'patch' and 'bzip2' to install_prereq PACKAGES_RH.
CentOS 6/7 32/64 build and run the pjsip testsuite successfully.
Ubuntu:
No changes required.
Ubuntu 15/16 32/64 build and run the pjsip testsuite successfully.
Debian:
No changes required.
Debian 6/7/8 32/64 build and run the pjsip testsuite successfully.
There will utimately be a follow-up patch to create an install_prereq for
the testsuite as I've discovered a few missing requirements.
ASTERISK-25968 #close
Change-Id: I5756a07facfc63798115a5e73a8709382fe9259c
When pjsip_parse_uri is called with PJSIP_UNESCAPE_IN_PLACE enabled,
the input uri string will become corrupted if it contains escape sequences.
It's not possible to automatically strdup or strdupa the input string because
the output uri pj_str_t's will have pointers to chunks of the input string.
Getting around this would require more memory management code and wouldn't
be worth the savings of doing the unescape in place.
ASTERISK-25970 #close
Reported-by: Dmitriy Serov
Change-Id: I28dc0e599b5108f7959b9c46dc8278371b372f88
From the patch submitted to Teluu on 4/12/2016
<<<<<<<<<
The wholesale stripping of '[]' from header parameters causes issues if
something (like a port) occurs after the final ']'.
'[2001🅰️:b]' will correctly parse to '2001🅰️:b'
'[2001🅰️:b]:8080' will correctly parse to '2001🅰️:b' but the scanner is left
with ':8080' and parsing stops with a syntax error.
I can't even find a case where stripping the '[]' is a good thing anyway. Even
if you continued to parse and resulted in a string that looks like this...
'2001🅰️🅱️8080', it's not valid.
This came up in Asterisk because Kamailio sends us a Contact with an alias
URI parameter that has an IPv6 address in it like this:
Contact: <sip:1171@127.0.0.1:5080;alias=[2001:1:2::3]~43691~6>
which should be legal but causes a syntax error because of the characters
after the final ']'. Even if it didn't, the '[]' should still not be stripped.
I've run the Asterisk Test Suite for PJSIP (252 tests) many of which are IPv6
enabled. No issues were caused by removing the code that strips the '[]'.
>>>>>>>>>>>
ASTERISK-25123 #close
Reported-by: Anthony Messina
Change-Id: I5cb33f4ebf07ee1f2b26d07caae715e2ec65595a
There's a bug in pjproject's sip_parser where the ":" wasn't correctly
interpreted. This is causing IPv6 addresses in the "received" parameter of the
Via header to cause a syntax check failure.
This patch was submitted to Teluu on 4/10/2016.
ASTERISK-25910 #close
Reported-by: Anthony Messina
Change-Id: Ic7e4c4aa14ded61860401ec349f5177568c4d922
PortAudio should no longer be required
PJSIP_MAX_PKT_LEN is now 6000
Older autoconf issue fixed. (CentOS 6)
Change-Id: I463fa9586cbe7c6b3b603289f535bd8e361611dd
Older versions of PJSIP do not have the proto field on the TLS transport
setting structure. This change adds a configure check so even if it is
not present we will still be able to build.
Change-Id: Ibf3f47befb91ed1b8194bf63888baa6fee05aba9
The pjproject Makefile now uses the Asterisk optimization flags which
are determined by the setting of the DONT_OPTMIZE menuselect flag.
The Makefile was also restructured so a change to the top level
menuselect.makeopts will result in a rebuild of pjproject.
Also, "--disable-resample" was removed from the pjproject configure
options. Without resample, pjsua (which is used by the testsuite)
can't make audio calls. When it can't, it segfaults.
Change-Id: I24b0a4d0872acef00ed89b3c527a713ee4c2ccd4
Apparently the != operator is fairly new so I've replaced it with
the old $(shell ...) syntax.
Change-Id: I16b2e1878a4f91e7e9740abd427f9639f933c479
Reported-by: Richard Mudgett
Background here:
http://lists.digium.com/pipermail/asterisk-dev/2016-January/075266.html
From CHANGES:
* To help insure that Asterisk is compiled and run with the same known
version of pjproject, a new option (--with-pjproject-bundled) has been
added to ./configure. When specified, the version of pjproject specified
in third-party/versions.mak will be downloaded and configured. When you
make Asterisk, the build process will also automatically build pjproject
and Asterisk will be statically linked to it. Once a particular version
of pjproject is configured and built, it won't be configured or built
again unless you run a 'make distclean'.
To facilitate testing, when 'make install' is run, the pjsua and pjsystest
utilities and the pjproject python bindings will be installed in
ASTDATADIR/third-party/pjproject.
The default behavior remains building with the shared pjproject
installation, if any.
Building:
All you have to do is include the --with-pjproject-bundled option on
the ./configure command line (and remove any existing --with-pjproject
option if specified). Everything else is automatic.
Behind the scenes:
The top-level Makefile was modified to include 'third-party' in the
list of MOD_SUBDIRS.
The third-party directory was created to contain any third party
packages that may be needed in the future. Its Makefile automatically
iterates over any subdirectories passing on targets.
The third-party/pjproject directory was created to house the pjproject
source distribution. Its Makefile contains targets to download, patch
configure, generate dependencies, compile libs, apps and python bindings,
sanitized build.mak and generate a symbols list.
When bootstrap.sh is run, it automatically includes the configure.m4
file in third-party/pjproject. This file has a macro to download and
conifgure pjproject and get and set PJPROJECT_INCLUDE, PJPROJECT_DIR
and PJPROJECT_BUNDLED. It also tests for the capabilities like
PJ_TRANSACTION_GRP_LOCK by parsing preprocessor output as opposed to
trying to compile. Of course, bootstrap.sh is only run once and the
configure file is incldued in the patch.
When configure is run with the new options, the macro in configure.m4
triggers the download, patch, conifgure and tests. No compilation is
performed at this time. The downloaded tarball is cached in /tmp so
it doesn't get downloaded again on a distclean.
When make is run in the top-level Asterisk source directory, it will
automatically descend all the subdirectories in third_party just as it
does for addons, apps, etc. The top-level Makefile makes sure that
the 'third-party' is built before 'main' so that dependencies from the
other directories are built first.
When main does build, a new shared library (libasteriskpj) is created that
links statically to the pjproject .a files and exports all their symbols.
The asterisk binary links to that, just as it does with libasteriskssl.
When Asterisk is installed, the pjsua and pjsystest apps, and the pjproject
python bindings are installed in ASTDATADIR/third-party/pjproject. This
will facilitate testing, including running the testsuite which will be
updated to check that directory for the pjsua module ahead of the system
python library.
Modules should continue to depend on pjproject if they use pjproject APIs
directly. They should not care about the implementation. No changes to any
res_pjsip modules were made.
Change-Id: Ia7a60c28c2e9ba9537c5570f933c1ebcb20a3103
