https://origsvn.digium.com/svn/asterisk/trunk
........
r198824 | dvossel | 2009-06-02 12:55:35 -0500 (Tue, 02 Jun 2009) | 8 lines
fixes issue with channels not going down after transfer
Iax2 currently does not support native bridging if the timeoutms value is set. We check for that in iax2_bridge, but then set timeoutms to 0 by default. If the timeoutms is not provided it is set to -1. By setting timeoutms to 0 it is processed causing a bridging retry loop.
(closes issue #15216)
Reported by: oxymoron
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@198826 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r195995 | dvossel | 2009-05-21 14:11:49 -0500 (Thu, 21 May 2009) | 20 lines
Merged revisions 195991 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r195991 | dvossel | 2009-05-21 14:04:56 -0500 (Thu, 21 May 2009) | 14 lines
Sign problem calculating timestamp for iax frame leads to no audio on the receiving peer.
There are rare cases in which a frame's delivery timestamp is slightly less than the iax2_pvt's offset. This causes the pvt's timestamp to be a small negative number, but since the timestamp value is unsigned it looks like a huge positive number. This patch checks for this negative case and sets the ms to zero. A similar check is already done right below this one in the 'else' statement.
(closes issue #15032)
Reported by: guillecabeza
Patches:
chan_iax2.c.patch_timestamp uploaded by guillecabeza (license 380)
Tested by: guillecabeza
(closes issue #14216)
Reported by: Andrey Sofronov
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@195998 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r194833 | dvossel | 2009-05-15 15:52:12 -0500 (Fri, 15 May 2009) | 24 lines
Merged revisions 194557,194685 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r194557 | dvossel | 2009-05-14 17:59:43 -0500 (Thu, 14 May 2009) | 10 lines
IAX2 "Ghost" Channels
There is a bug tracker issue where people are reporting "Ghost" channels in their 'iax2 show channels' output. The confusion is caused by channels being listed as "(NONE)" with format "unknown". These are not channels of coarse. They are usually just pending registration or poke requests, but it is confusing output. To help make sense of this I have added two columns to 'iax2 show channels'. One shows the first message which started the transaction, and the second shows the last message sent by either side of the call. This helps diagnose why the entry exists and why it may not go away.
(closes issue #14207)
Reported by: clive18
Review: https://reviewboard.asterisk.org/r/246/
........
r194685 | dvossel | 2009-05-15 10:40:37 -0500 (Fri, 15 May 2009) | 6 lines
Update to previous IAX2 "Ghost" Channels patch.
Fixed some comments made on reviewboard for the previous patch.
(issue #14207)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@194835 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r192808 | file | 2009-05-06 14:38:51 -0300 (Wed, 06 May 2009) | 10 lines
Fix a bug where a timer would be created but not acknowledged.
This scenario crept up if chan_iax2 was loaded with no configuration file present.
It would create a timer and tell it to go at an interval but the thread that normally
acknowledges it would not be created because no configuration file was present. The timer
will now be closed if no configuration file is present.
(closes issue #15014)
Reported by: madkins
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@192809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r189419 | dbailey | 2009-04-20 14:28:16 -0500 (Mon, 20 Apr 2009) | 11 lines
Merged revisions 189391 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r189391 | dbailey | 2009-04-20 14:10:56 -0500 (Mon, 20 Apr 2009) | 4 lines
Clean up problem with manager implementation of mmap where it was not testing against MAP_FAILED response.
Got rid of shadowed variable used in processign the mmap results.
Change test of mmap results to compare against MAP_FAILED
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@189422 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184762 | kpfleming | 2009-03-27 14:10:32 -0500 (Fri, 27 Mar 2009) | 12 lines
Improve timing interface to remember which provider provided a timer
The ability to load/unload timing interfaces is nice, but it means that when a timer is allocated, it may come from provider A, but later provider B becomes the 'preferred' provider. If this happens, all timer API calls on the timer that was provided by provider A will actually be handed to provider B, which will say WTF and return an error.
This patch changes the timer API to include a pointer to the provider of the timer handle so that future operations on the timer will be forwarded to the proper provider.
(closes issue #14697)
Reported by: moy
Review: http://reviewboard.digium.com/r/211/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184339 | russell | 2009-03-25 16:57:19 -0500 (Wed, 25 Mar 2009) | 35 lines
Improve performance of the ast_event cache functionality.
This code comes from svn/asterisk/team/russell/event_performance/.
Here is a summary of the changes that have been made, in order of both
invasiveness and performance impact, from smallest to largest.
1) Asterisk 1.6.1 introduces some additional logic to be able to handle
distributed device state. This functionality comes at a cost.
One relatively minor change in this patch is that the extra processing
required for distributed device state is now completely bypassed if
it's not needed.
2) One of the things that I noticed when profiling this code was that a
_lot_ of time was spent doing string comparisons. I changed the way
strings are represented in an event to include a hash value at the front.
So, before doing a string comparison, we do an integer comparison on the
hash.
3) Finally, the code that handles the event cache has been re-written.
I tried to do this in a such a way that it had minimal impact on the API.
I did have to change one API call, though - ast_event_queue_and_cache().
However, the way it works now is nicer, IMO. Each type of event that
can be cached (MWI, device state) has its own hash table and rules for
hashing and comparing objects. This by far made the biggest impact on
performance.
For additional details regarding this code and how it was tested, please see the
review request.
(closes issue #14738)
Reported by: russell
Review: http://reviewboard.digium.com/r/205/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r184037 | russell | 2009-03-24 16:40:44 -0500 (Tue, 24 Mar 2009) | 6 lines
Exclude slin16, siren7, and siren14 from bandwidth=low and =medium
The default codec configuration for chan_iax2 is bandwidth=low. I noticed
slin16 being negotiated as the codec in some test calls, but that no longer
happens after this change.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@184039 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r182282 | dvossel | 2009-03-16 12:49:58 -0500 (Mon, 16 Mar 2009) | 13 lines
Merged revisions 182281 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182281 | dvossel | 2009-03-16 12:47:42 -0500 (Mon, 16 Mar 2009) | 7 lines
Randomize IAX2 encryption padding
The 16-32 byte random padding at the beginning of an encrypted IAX2 frame turns out to not be all that random at all. This patch calls ast_random to fill the padding buffer with random data. The padding is randomized at the beginning of every encrypted call and for every encrypted retransmit frame.
Review: http://reviewboard.digium.com/r/193/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@182284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r181371 | dvossel | 2009-03-11 12:34:57 -0500 (Wed, 11 Mar 2009) | 17 lines
Merged revisions 181340 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r181340 | dvossel | 2009-03-11 12:25:31 -0500 (Wed, 11 Mar 2009) | 11 lines
encrypted IAX2 during packet loss causes decryption to fail on retransmitted frames
If an iax channel is encrypted, and a retransmit frame is sent, that packet's iseqno is updated while it is encrypted. This causes the entire frame to be corrupted. When the corrupted frame is sent, the other side decrypts it and sends a VNAK back because the decrypted frame doesn't make any sense. When we get the VNAK, we look through the sent queue and send the same corrupted frame causing a loop. To fix this, encrypted frames requiring retransmission are decrypted, updated, then re-encrypted. Since key-rotation may change the key held by the pvt struct, the keys used for encryption/decryption are held within the iax_frame to guarantee they remain correct.
(closes issue #14607)
Reported by: stevenla
Tested by: dvossel
Review: http://reviewboard.digium.com/r/192/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@181373 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r178767 | dvossel | 2009-02-26 09:50:22 -0600 (Thu, 26 Feb 2009) | 8 lines
IAX2 prune realtime fix
Iax2 prune realtime had issues. If "iax2 prune realtime all" was called, it would appear like the command was successful, but in reality nothing happened. This is because the reload that was supposed to take place checks the config files, sees no changes, and does nothing. If there had been a change in the the config file, the realtime users would have been marked for deletion and everything would have been fine. Now prune_users() and prune_peers() are called instead of reload_config() to prune all users/peers that are realtime. These functions remove all users/peers with the rtfriend and delme flags set. iax2_prune_realtime() also lacked the code to properly delete a single friend. For example. if iax2 prune realtime <friend> was called, only the peer instance would be removed. The user would still remain.
(closes issue #14479)
Reported by: mousepad99
Review: http://reviewboard.digium.com/r/176/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@178769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
During iax2 call negotiation, supported codecs are passed in an Information Element containing a 2 byte field where each bit correlates to a specific codec. In 1.6 only audio codec bits 0-12 are defined, leaving bits 13-14 undefined. By default all bits are enabled unless specified otherwise. Since its a 2 byte field and 13-14 are not defined, these bits are never turned off. In trunk, bits 13-14 are defined, which means 1.6 is advertising support for codecs it does not have when talking to trunk. I fixed this by adding #define for undefined audio codec bits. These bits are then removed from iax2's full bandwidth capabilities.
(closes issue #14283)
Reported by: jcovert
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@177700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r176355 | dvossel | 2009-02-16 17:33:55 -0600 (Mon, 16 Feb 2009) | 13 lines
Merged revisions 176354 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r176354 | dvossel | 2009-02-16 17:30:52 -0600 (Mon, 16 Feb 2009) | 8 lines
Fixes issue with AST_CONTROL_SRCUPDATE not being relayed correctly during bridging
This should have been committed with rev176247, but I missed it. srcupdate frames no longer break out of the native bridge, but are not being sent to the other call leg either. This fixs that.
issue #13749
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@176362 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r176248 | dvossel | 2009-02-16 15:30:17 -0600 (Mon, 16 Feb 2009) | 11 lines
Merged revisions 175597 via svnmerge from
https://origsvn.digium.com/svn/asterisk/trunk
........
r175597 | dvossel | 2009-02-13 14:11:55 -0600 (Fri, 13 Feb 2009) | 4 lines
Fixed iax2 key rotation backwards compatibility
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@176251 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r175597 | dvossel | 2009-02-13 14:11:55 -0600 (Fri, 13 Feb 2009) | 4 lines
Fixed iax2 key rotation backwards compatibility
Turns key rotation back on by default. Added bit into encryption IE to indicate whether or not key rotation is supported or not. If it is not supported then it is not enabled, which insures backwards compatibility. This eliminates the need for the keyrotate option in iax.conf, so it has been removed.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@175662 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r175127 | dvossel | 2009-02-12 11:07:17 -0600 (Thu, 12 Feb 2009) | 4 lines
Setting key rotation to be off by default
Key rotation breaks compatibility between (trunk/1.6.1) and (1.2/1.4/1.6.0). As a follow up to this, I am investigating possible ways to allow key rotation to be on by default and not affect the other branches, but for now it must be turned off.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@175130 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r173502 | dvossel | 2009-02-04 15:25:14 -0600 (Wed, 04 Feb 2009) | 9 lines
Fixes issue with IAX2 transfer not handing off calls. Reverts changes in 116884
Fixes issue with IAX2 transfers not taking place. As it was, a call that was being transfered would never be handed off correctly to the call ends because of how call numbers were stored in a hash table. The hash table, "iax_peercallno_pvt", storing all the current call numbers did not take into account the complications associated with transferring a call, so a separate hash table was required. This second hash table "iax_transfercallno_pvt" handles calls being transfered, once the call transfer is complete the call is removed from the transfer hash table and added to the peer hash table resuming normal operations. Addition functions were created to handle storing, removing, and comparing items in the iax_transfercallno_pvt table. The changes reverted in 116884 caused backwards compatibility issues involving iax2 transfer with 1.6.0, 1.4, and 1.2.
(closes issue #13468)
Reported by: nicox
Tested by: dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@173506 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r160004 | russell | 2008-12-01 11:34:31 -0600 (Mon, 01 Dec 2008) | 14 lines
Merged revisions 160003 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r160003 | russell | 2008-12-01 11:27:30 -0600 (Mon, 01 Dec 2008) | 6 lines
Apply some logic used in iax2_indicate() to iax2_setoption(), as well, since they
both have the potential to send control frames in the middle of call setup. We
have to wait until we have received a message back from the remote end before
we try to send any more frames. Otherwise, the remote end will consider it
invalid, and we'll get stuck in an INVAL/VNAK storm.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@160006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r159818 | kpfleming | 2008-11-29 11:57:39 -0600 (Sat, 29 Nov 2008) | 18 lines
incorporates r159808 from branches/1.4:
------------------------------------------------------------------------
r159808 | kpfleming | 2008-11-29 10:58:29 -0600 (Sat, 29 Nov 2008) | 7 lines
update dev-mode compiler flags to match the ones used by default on Ubuntu Intrepid, so all developers will see the same warnings and errors
since this branch already had some printf format attributes, enable checking for them and tag functions that didn't have them
format attributes in a consistent way
------------------------------------------------------------------------
in addition:
move some format attributes from main/utils.c to the header files they belong in, and fix up references to the relevant functions based on new compiler warnings
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@159851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r159360 | murf | 2008-11-25 16:03:01 -0700 (Tue, 25 Nov 2008) | 23 lines
Merged revisions 159316 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r159316 | murf | 2008-11-25 15:41:10 -0700 (Tue, 25 Nov 2008) | 15 lines
(closes issue #12694)
Reported by: yraber
Patches:
12694.2nd.diff uploaded by murf (license 17)
Tested by: murf, laurav
Thanks to file (Joshua Colp) for his IAX fix.
the change to cdr.c allows no-answer to percolate
up into CDR's, and feels like the right place to
locate this fix; if BUSY is done here, no-answer
should be, too.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@159375 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r156243 | tilghman | 2008-11-12 12:55:18 -0600 (Wed, 12 Nov 2008) | 18 lines
Merged revisions 156229 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156229 | tilghman | 2008-11-12 12:39:21 -0600 (Wed, 12 Nov 2008) | 11 lines
Revert revision 132506, since it occasionally caused IAX2 HANGUP packets not
to be sent, and instead, schedule a task to destroy the iax2 pvt structure
10 seconds later. This allows the IAX2 HANGUP packet to be queued,
transmitted, and ACKed before the pvt is destroyed.
(closes issue #13645)
Reported by: dzajro
Patches:
20081111__bug13645__3.diff.txt uploaded by Corydon76 (license 14)
Tested by: vazir
Reviewed: http://reviewboard.digium.com/r/51/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@156288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r154428 | tilghman | 2008-11-04 17:03:00 -0600 (Tue, 04 Nov 2008) | 7 lines
Switch to using a thread condition to signal that a child thread is ready for
work, rather than a busy wait.
(closes issue #13011)
Reported by: jpgrayson
Patches:
chan_iax2_find_idle.patch uploaded by jpgrayson (license 492)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@154917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r154366 | tilghman | 2008-11-04 14:51:18 -0600 (Tue, 04 Nov 2008) | 16 lines
Merged revisions 154365 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r154365 | tilghman | 2008-11-04 14:49:33 -0600 (Tue, 04 Nov 2008) | 9 lines
On busy systems, it's possible for the values checked within a single line
of code to change, unless the structure is locked to ensure a consistent
state.
(closes issue #13717)
Reported by: kowalma
Patches:
20081102__bug13717.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@154367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r147807 | murf | 2008-10-09 08:17:33 -0600 (Thu, 09 Oct 2008) | 15 lines
(closes issue #13557)
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@147811 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r146802 | tilghman | 2008-10-06 16:09:05 -0500 (Mon, 06 Oct 2008) | 15 lines
Merged revisions 146799 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r146799 | tilghman | 2008-10-06 15:52:04 -0500 (Mon, 06 Oct 2008) | 8 lines
Dialplan functions should not actually return 0, unless they have modified the
workspace. To signal an error (and no change to the workspace), -1 should be
returned instead.
(closes issue #13340)
Reported by: kryptolus
Patches:
20080827__bug13340__2.diff.txt uploaded by Corydon76 (license 14)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@146838 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r140489 | mmichelson | 2008-08-29 12:47:17 -0500 (Fri, 29 Aug 2008) | 30 lines
Merged revisions 140488 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r140488 | mmichelson | 2008-08-29 12:34:17 -0500 (Fri, 29 Aug 2008) | 22 lines
After working on the ao2_containers branch, I noticed
something a bit strange. In all cases where we provide
a callback function to ao2_container_alloc, the callback
function would only return 0 or CMP_MATCH. After inspecting
the ao2_callback() code carefully, I found that if you're
only looking for one specific item, then you should return
CMP_MATCH | CMP_STOP. Otherwise, astobj2 will continue
traversing the current bucket until the end searching for
more matches.
In cases like chan_iax2 where in 1.4, all the peers are
shoved into a single bucket, this makes for potentially
terrible performance since the entire bucket will be
traversed even if the peer is one of the first ones come
across in the bucket.
All the changes I have made were for cases where the
callback function defined was passed to ao2_container_alloc
so that calls to ao2_find could find a unique instance
of whatever object was being stored in the container.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@140490 65c4cc65-6c06-0410-ace0-fbb531ad65f3
