With the new option engaged, Asterisk should interpret user fields with useroptions
contained within the userfield of the uri by stripping them out of the original message
whenever a semicolon is encountered in the userfield string.
(closes issue #18344)
Reported by: danimal
Tested by: jrose
Review: https://reviewboard.asterisk.org/r/1223/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319938 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r319653 | twilson | 2011-05-18 16:11:57 -0700 (Wed, 18 May 2011) | 15 lines
Merged revisions 319652 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r319652 | twilson | 2011-05-18 16:04:35 -0700 (Wed, 18 May 2011) | 8 lines
Make sure everyone gets an unhold when a transfer succeeds
Some phones, like the Snom phones, send a hold to the transfer target after
before sending the REFER. We need to make sure that we unhold the parties
that are being connected after the masquerade. If Local channels with the /nm
option are used when dialing the parties, hold music would still be playing on
the transfer target, even after being connected with the transferee.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319654 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The fix for issue 18882 broke retrieving non-realtime peers from the ast_db
on restart/reload. This patch tries to unbreak things while leaving the intent
of the original fix intact.
(closes issue #19318)
Reported by: remiq
Patches:
diff.txt uploaded by twilson (license 396)
Tested by: lmadsen, remiq
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319552 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r319468 | rmudgett | 2011-05-17 16:49:31 -0500 (Tue, 17 May 2011) | 15 lines
The mISDN HDLC mode is prevented on dialed channels.
The use of mISDN HDLC mode is prevented if the mISDN dial technology
option 'h1' is used when config option astdtmf=yes.
There is a bug in channels/misdn/isdn_lib.c which prevents the use of HDLC
mode. Instead of setting the channel to HDLC mode it is set to
transparent(no dsp, no hdlc), although hdlc is not "no hdlc". I.e the
logging message is correct, but the if condition is not.
Make check the nodsp and hdlc flags.
JIRA ABE-2787
JIRA SWP-3437
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@319469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
And another way to pass early media. Don't indicate that there is inband
information present, just assume that the B channel is connected.
* Restore clearing the dialing flag Rx squelch unconditionally when a
PROCEEDING message comes in.
(closes issue #19268)
Reported by: tbsky
Patches:
issue19268_v1.8.patch uploaded by rmudgett (license 664)
Tested by: tbsky
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 1.6.2, the new pickupsound and pickupfailsound in features.conf cause many issues.
1). chan_sip:handle_request_invite() shouldn't be playing out the fail/success audio, as it has 'netlock' locked.
2). dialplan applications for directed_pickups shouldn't beep.
3). feature code for directed pickup should beep on success/failure if configured.
Created a sip_pickup() thread to handle the pickup and playout the audio, spawned from handle_request_invite.
Moved app_directed:pickup_do() to features:ast_do_pickup().
Functions below, all now use the new ast_do_pickup()
app_directed_pickup.c:
pickup_by_channel()
pickup_by_exten()
pickup_by_mark()
pickup_by_part()
features.c:
ast_pickup_call()
(closes issue #18654)
Reported by: Docent
Patches:
ast_do_pickup_1.8_trunk.diff.txt uploaded by alecdavis (license 585)
Tested by: lmadsen, francesco_r, amilcar, isis242, alecdavis, irroot, rymkus, loloski, rmudgett
Review: https://reviewboard.asterisk.org/r/1185/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318548 | twilson | 2011-05-11 12:15:39 -0500 (Wed, 11 May 2011) | 19 lines
Clean up several chan_sip reference leaks
Several situations in the code could lead to peers or sip_pvt references
being leaked. This would cause RTP ports to never be destroyed (leading
to exhaustion of all available RTP ports) and memory leaks.
The original patch for this issue from rgagnon was the result of an
obscene amount of testing and hard work, for which I am very grateful. I
did some cleanup and added a few additional refcount fixes that I found.
(closes issue #17255)
Reported by: kvveltho
Patches:
tag-1.6.2.17-r309252-sip-dos-mem-leak-fix.diff uploaded by rgagnon (license 1202)
Tested by: rgagnon, twilson, wdoekes, loloski
Review: https://reviewboard.asterisk.org/r/1101/
Review: https://reviewboard.asterisk.org/r/1207/
Review: https://reviewboard.asterisk.org/r/1210/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318549 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The channel state is not updated to RINGING when an ALERTING message is
received. Regression caused when sig_pri.c (also sig_ss7.c) extracted
from chan_dahdi.c.
* Added missing channel state update to RINGING when the
AST_CONTROL_RINGING frame is queued for ISDN and SS7.
(closes issue #19257)
Reported by: alecdavis
Patches:
issue19257_v1.8_v2.patch uploaded by rmudgett (license 664)
Tested by: alecdavis, rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318499 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r318331 | twilson | 2011-05-09 15:04:41 -0500 (Mon, 09 May 2011) | 12 lines
Don't offer video to directmedia callee unless caller offered it as well
Make sure that when directmedia is enabled, that video is not offered to the
callee even if it supports it. p->vrtp will not exist since the caller didn't
offer video.
(closes issue #19195)
Reported by: one47
Patches:
sip_cant_add_video_rtp uploaded by one47 (license 23)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318337 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It looks to be a long-standing misinterpretation of the progress indicator
ie values:
1 - Call is not end-to-end ISDN; further call progress information may be
available in-band.
8 - In-band information or an appropriate pattern is now available.
Only value 8 is handled by chan_dahdi/sig_pri. The 1 value is not handled
as early media probably because the meaning of the second half of it's
description was overlooked.
* Test to see if either PRI_PROG_CALL_NOT_E2E_ISDN(1) or
PRI_PROG_INBAND_AVAILABLE(8) bits are set to open the media path.
(closes issue #18868)
Reported by: isrl
Patches:
issue18868_19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: satish_lx
..........
No inband progress on PRI_EVENT_RINGING even if inband flag set.
My ISDN-PRI provider sends an ALERTING with "Inband information or
appropriate pattern now available", but Asterisk only generates and passes
the RING to the SIP extension, not the inband message. Unfortunately, the
inband message is not a ringback tone but a prompt that says the number is
not in service. The SIP extension then hears two rings and the call is
hungup which confuses the caller.
* Post an AST_CONTROL_PROGRESS as well as opening the media path if inband
audio is indicated with an ALERTING message.
(closes issue #19246)
Reported by: cristiandimache
Patches:
issue19246_v1.8.patch uploaded by rmudgett (license 664)
Tested by: cristiandimache
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@318231 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't duplicate variables on the sip_pvt. Just reset the variable list each
time.
(closes issue #19202)
Reported by: wdoekes
Patches:
issue19202_destroy_challenged_invite_chanvars.patch uploaded by wdoekes (license 717)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317867 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't block doing silly deadlock avoidance. Just return and try again later.
The funciton gets called often enough that it's fine. Also, this change was
already made in trunk.
(closes issue #18791)
Reported by: irroot
Patches:
chan_sip.rtptimeout.patch uploaded by irroot (license 52)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317865 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If this change causes any problems, we will need to backport the more extensive
uri encoding and decoding handling changes that are in trunk/1.10.
(closes issue #18686)
Reported by: wolfgang
Patches:
quick-and-dirty.patch uploaded by wdoekes (license 717)
Tested by: wdoekes, devellow, wolfgang, mav3rick
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a couple SIP connected line update problems:
1) The connected line needs to be updated when the initial INVITE is sent
if there is a peer callerid configured. Previously, the connected line
information did not get reported until the call was connected so SIP could
not report connected line information in ringing or progress messages.
2) The connected line should not be updated on initial connect if there is
no connected line information. Previously, all it did was wipe out any
default preset CONNECTEDLINE information set by the dialplan with empty
strings.
(closes issue #18367)
Reported by: GeorgeKonopacki
Patches:
issue18367_v1.8.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1199/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317670 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Store the defaults noted in the sample config files in the jitterbuffer config
data structure. This makes the CLI commands that output these settings show
the right thing. Also only show the settings that are relevant in the settings
CLI commands, based on which jitterbuffer is selected and whether it's enabled.
(closes issue #19083)
Reported by: rgagnon
Patches:
issue-19083-trunk-r313139.diff uploaded by rgagnon (license 1202)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317478 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is based on an uncommitted patch by jpeeler for the issue. Instead of
relocking and then unlocking the channel though, we keep the lock on the channel
until we are finished doing what we need to the channel.
(closes issue #18441)
Reported by: Alric
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317283 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r317255 | russell | 2011-05-05 13:29:53 -0500 (Thu, 05 May 2011) | 22 lines
Merged revisions 317211 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r317211 | russell | 2011-05-05 13:20:29 -0500 (Thu, 05 May 2011) | 15 lines
chan_sip: fix broken realtime peer count, fix memory leak
This patch addresses two bugs in chan_sip:
1) The count of realtime peers and users was off. The increment checked the
value of the caching option, while the decrement did not.
2) Add a missing regfree() for a regex.
(closes issue #19108)
Reported by: vrban
Patches:
missing_regfree.patch uploaded by vrban (license 756)
sip_object_counter.patch uploaded by vrban (license 756)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@317281 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r316616 | dvossel | 2011-05-04 08:40:41 -0500 (Wed, 04 May 2011) | 12 lines
Fixes session-timers=refuse not being enforced for *caller*
During handle_request_invite, the session timer mode was retrieved from
a cached variable. This patch forces a peer lookup of the session timer
mode in the case of an incoming invite.
(closes issue #18804)
Reported by: wdoekes
Patches:
issue18804_session_timer_refuse_caller.patch uploaded by wdoekes (license 717)
issue_18804_v2.diff uploaded by dvossel (license 671)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@316617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After dahdi_hangup() has supposedly hungup an ISDN channel there is still
traffic on the S0-bus because the channel was not cleaned up fully.
Shuffled the hangup code to include some missing cleanup. Also fixed some
code formatting in the area. I think the primary missing clean up code
was the call to tone_zone_play_tone() to turn off any active tones on the
channel.
(closes issue #19188)
Reported by: jg1234
Patches:
issue19188_v1.8.patch uploaded by rmudgett (license 664)
Tested by: jg1234
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@316224 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This has already been discussed and should have been resolved earlier. View
revsion 285565's log for more information about why it is important to not
put timer in the Require header.
(closes issue #18704)
Reported by: mfrager
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@316217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315893 | mnicholson | 2011-04-27 14:03:05 -0500 (Wed, 27 Apr 2011) | 21 lines
Merged revisions 315891 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315891 | mnicholson | 2011-04-27 13:57:56 -0500 (Wed, 27 Apr 2011) | 14 lines
Fix our compliance with RFC 3261 section 18.2.2.
This change optimizes the free_via() function and removes some redundant null
checking. It also fixes compliance with RFC 3261 section 18.2.2 by always using
the port specified in the Via header for routing responses (even when maddr is
not set). Also the htons() function is now used when setting the port.
Additional documentation comments have been added in various places to make the
logic in the code clearer.
(closes issue #18951)
Reported by: jmls
Patches:
issue18951_set_proper_port_from_via.patch uploaded by wdoekes (license 717) (modified)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@315894 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r315672 | twilson | 2011-04-26 15:52:25 -0700 (Tue, 26 Apr 2011) | 18 lines
Merged revisions 315671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r315671 | twilson | 2011-04-26 15:47:56 -0700 (Tue, 26 Apr 2011) | 11 lines
Make sure unregistering a peer unlinks it from the peer container
Instead of mostly copying the code from expire_register, just use the function
that "does the right thing".
(closes issue #16033)
Reported by: kkm
Patches:
016033-tilgman-fixed-refcount.diff uploaded by kkm (license 888)
Tested by: kkm, tilghman, twilson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@315673 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch resolves a fairly complex deadlock that can occur with the
combination of chan_local and a dialplan switch, such as dynamic realtime
extensions, which pulls autoservice into the picture when doing a dialplan
lookup.
(closes issue #18818)
Reported by: nic
Patches:
issue18818.patch uploaded by jthurman (license 614)
18818.v1.txt uploaded by russell (license 2)
Tested by: nic, jthurman, kterzi, steve-howes, sysreq, IshMalik
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@315446 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r314620 | mnicholson | 2011-04-21 13:22:19 -0500 (Thu, 21 Apr 2011) | 20 lines
Merged revisions 314607 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r314607 | mnicholson | 2011-04-21 13:19:21 -0500 (Thu, 21 Apr 2011) | 14 lines
Added limits to the number of unauthenticated sessions TCP based protocols are allowed to have open simultaneously. Also added timeouts for unauthenticated sessions where it made sense to do so.
Unrelated, the manager interface now properly checks if the user has the "system" privilege before executing shell commands via the Originate action.
AST-2011-005
AST-2011-006
(closes issue #18787)
Reported by: kobaz
(related to issue #18996)
Reported by: tzafrir
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@314628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r314549 | twilson | 2011-04-20 17:17:34 -0700 (Wed, 20 Apr 2011) | 6 lines
Don't allocate more space than necessary for a sip_pkt
This extra allocation is a hold-over from when pkt->data was a
character array. Now that it is an allocated string, just allocate
enough for the sip_pkt.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@314550 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Deadlock avoidance between the sip pvt and the pvt->owner is
very difficult. Now that channel's are ao2 objects, this complication
is no longer necessary. It turns out the pvt's msg queue only
exists because of deadlock avoidance (when deadlock avoidance fails
msgs were added to a queue to be processed later), so this goes away as well.
The technique used in the new sip_lock_pvt_full() function should
be used as a template for replacing all locations where deadlock
avoidance occurs between a channel tech_pvt and the pvt's owner.
My hope is that this will begin a reversal of the invalid channel
driver locking architecture we have been using for so long.
This patch also resolves an issue where the pvt->owner gets
unlocked during processing the msg queue.
(closes issue #18690)
Reported by: dvossel
Review: https://reviewboard.asterisk.org/r/1182/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@314067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes how chan_sip handles dynamic rtp payload types
it does not understand. At the moment if a dynamic payload's mime
type does not match one we understand, the payload does not get
removed from our payload table. As a result of this, the payload
is set to whatever dynamic codec we use internally for that payload
number on outgoing INVITES. This is incorrect.
This patch fixes this by properly checking the rtpmap set function's
return code to make sure it was found. The function can return both
-1 and -2 depending on the source of the mismatch. We were just
checking -1 explicitly.
Review: https://reviewboard.asterisk.org/r/1169/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@314017 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Executing Dial(DAHDI/1/18475551212,300,) with the echotraining config
option enabled outputs the following debug messages unconditionally:
Dialing T1847555121 on 1
Dialing www2w on 1
* Made debug messages in my_dial_digits() normal debug messages that do
not get output unless enabled.
* Reworded some debug messages in my_dial_digits() to be clearer.
* Replace strncpy() with ast_copy_string() in my_dial_digits() which does
the same job better.
(closes issue #18847)
Reported by: vmikhelson
Tested by: rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@313780 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
Merged revisions 313435 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r313432 | jrose | 2011-04-12 13:12:29 -0500 (Tue, 12 Apr 2011) | 14 lines
reload Chan_dahdi memory leak caused by variables
chan_dahdi reloading with variables set via setvar in chan_dahdi.conf would
stay in the dahdi_pvt structs for individual channels (causing them to just
continue adding the new ones to the list) and also there was a memory leak
causes by the conf objects. This patch resolves both of these by using
ast_variables_destroy during the loading process.
(closes issue #17450)
Reported by: nahuelgreco
Patches:
patch.diff uploaded by jrose (license 1225)
Tested by: tilghman, jrose
Review: https://reviewboard.asterisk.org/r/1170/
........
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@313436 65c4cc65-6c06-0410-ace0-fbb531ad65f3
