https://origsvn.digium.com/svn/asterisk/trunk
................
r224671 | kpfleming | 2009-10-19 18:47:39 -0500 (Mon, 19 Oct 2009) | 14 lines
Merged revisions 224670 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r224670 | kpfleming | 2009-10-19 18:44:07 -0500 (Mon, 19 Oct 2009) | 7 lines
Correct timestamp calculations when RTP sample rates over 8kHz are used.
While testing some endpoints that support 16kHz and 32kHz sample rates, some
log messages were generated due to calc_rxstamp() computing timestamps in a way
that produced odd results, so this patch sanitizes the result of the
computations.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@224672 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r221266 | twilson | 2009-09-30 12:52:30 -0500 (Wed, 30 Sep 2009) | 32 lines
Merged revisions 221086 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r221086 | twilson | 2009-09-30 09:49:11 -0500 (Wed, 30 Sep 2009) | 25 lines
Change the SSRC by default when our media stream changes
Be default, change SSRC when doing an audio stream changes Asterisk doesn't
honor marker bit when reinvited to already-bridged RTP streams,resulting in
far-end stack discarding packets with "old" timestamps that areactually part of
a new stream. This patch sends AST_CONTROL_SRCUPDATE whenever there is a
reinvite, unless the 'constantssrc' is set to true in sip.conf.
The original issue reported to Digium support detailed the following situation:
ITSP <-> Asterisk 1.4.26.2 <-> SIP-based Application Server Call comes in
fromITSP, Asterisk dials the app server which sends a re-invite back
toAsterisk--not to negotiate to send media directly to the ITSP, but to
indicatethat it's changing the stream it's sending to Asterisk. The app
servergenerates a new SSRC, sequence numbers, timestamps, and sets the marker
bit on the new stream. Asterisk passes through the teimstamp of the new stream,
butdoes not reset the SSRC, sequence numbers, or set the marker bit.
When the timestamp on the new stream is older than the timestamp on the
originalstream, the ITSP (which doesn't know there has been any change) discards
the newframes because it thinks they are too old. This patch addresses this by
changing the SSRC on a stream update unless constantssrc=true is set in
sip.conf.
Review: https://reviewboard.asterisk.org/r/374/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@221301 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since 1.6.X still has the deprecated 'rtp debug ip <foo>'
this patch is different from the fix that went into trunk
(closes issue #15711)
Reported by: davidw
Patches:
2009082800-rtpdebug.diff.txt uploaded by mvanbaak (license 7)
Tested by: davidw
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@218108 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r208464 | kpfleming | 2009-07-23 16:57:24 -0500 (Thu, 23 Jul 2009) | 46 lines
Rework of T.38 negotiation and UDPTL API to address interoperability problems
Over the past couple of months, a number of issues with Asterisk
negotiating (and successfully completing) T.38 sessions with various
endpoints have been found. This patch attempts to address many of
them, primarily focused around ensuring that the endpoints'
MaxDatagram size is honored, and in addition by ensuring that T.38
session parameter negotiation is performed correctly according to the
ITU T.38 Recommendation.
The major changes here are:
1) T.38 applications in Asterisk (app_fax) only generate/receive IFP
packets, they do not ever work with UDPTL packets. As a result of
this, they cannot be allowed to generate packets that would overflow
the other endpoints' MaxDatagram size after the UDPTL stack adds any
error correction information. With this patch, the application is told
the maximum *IFP* size it can generate, based on a calculation using
the far end MaxDatagram size and the active error correction mode on
the T.38 session. The same is true for sending *our* MaxDatagram size
to the remote endpoint; it is computed from the value that the
application says it can accept (for a single IFP packet) combined with
the active error correction mode.
2) All treatment of T.38 session parameters as 'capabilities' in
chan_sip has been removed; these parameters are not at all like
audio/video stream capabilities. There are strict rules to follow for
computing an answer to a T.38 offer, and chan_sip now follows those
rules, using the desired parameters from the application (or channel)
that wants to accept the T.38 negotiation.
3) chan_sip now stores and forwards ast_control_t38_parameters
structures for tracking 'our' and 'their' T.38 session parameters;
this greatly simplifies negotiation, especially for pass-through
calls.
4) Since T.38 negotiation without specifying parameters or receiving
the final negotiated parameters is not very worthwhile, the
AST_CONTROL_T38 control frame has been removed. A note has been added
to UPGRADE.txt about this removal, since any out-of-tree applications
that use it will no longer function properly until they are upgraded
to use AST_CONTROL_T38_PARAMETERS.
Review: https://reviewboard.asterisk.org/r/310/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@208468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r197606 | mmichelson | 2009-05-28 10:32:19 -0500 (Thu, 28 May 2009) | 22 lines
Recorded merge of revisions 197588 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r197588 | mmichelson | 2009-05-28 10:27:49 -0500 (Thu, 28 May 2009) | 16 lines
Allow for media to arrive from an alternate source when responding to a reinvite with 491.
When we receive a SIP reinvite, it is possible that we may not be able to process the
reinvite immediately since we have also sent a reinvite out ourselves. The problem is
that whoever sent us the reinvite may have also sent a reinvite out to another party,
and that reinvite may have succeeded.
As a result, even though we are not going to accept the reinvite we just received, it
is important for us to not have problems if we suddenly start receiving RTP from a new
source. The fix for this is to grab the media source information from the SDP of the
reinvite that we receive. This information is passed to the RTP layer so that it will
know about the alternate source for media.
Review: https://reviewboard.asterisk.org/r/252
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@197615 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r180373 | kpfleming | 2009-03-05 12:29:38 -0600 (Thu, 05 Mar 2009) | 15 lines
Merged revisions 180372 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r180372 | kpfleming | 2009-03-05 12:22:16 -0600 (Thu, 05 Mar 2009) | 9 lines
Fix problems when RTP packet frame size is changed
During some code analysis, I found that calling ast_rtp_codec_setpref() on an ast_rtp session does not work as expected; it does not adjust the smoother that may on the RTP session, in fact it summarily drops it, even if it has data in it, even if the current format's framing size has not changed. This is not good.
This patch changes this behavior, so that if the packetization size for the current format changes, any existing smoother is safely updated to use the new size, and if no smoother was present, one is created. A new API call for smoothers, ast_smoother_reconfigure(), was required to implement these changes.
Review: http://reviewboard.digium.com/r/184/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@180377 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r178142 | russell | 2009-02-23 17:11:37 -0600 (Mon, 23 Feb 2009) | 22 lines
Merged revisions 178141 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r178141 | russell | 2009-02-23 17:09:01 -0600 (Mon, 23 Feb 2009) | 14 lines
Fix infinite DTMF when a BEGIN is received without an END.
This commit is related to rev 175124 of 1.4 where a previous attempt was made
to fix this problem. The problem with the previous patch was that the inserted
code needed to go _before_ setting the lastrxts to the current timestamp.
Because those were the same, the dtmfcount variable was never decremented, and
so the END was never sent.
In passing, I removed the dtmfsamples variable which was completed unused. I
also removed a redundant setting of the lastrxts variable.
(closes issue #14460)
Reported by: moliveras
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@178145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r175125 | russell | 2009-02-12 10:57:25 -0600 (Thu, 12 Feb 2009) | 35 lines
Merged revisions 175124 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r175124 | russell | 2009-02-12 10:51:13 -0600 (Thu, 12 Feb 2009) | 27 lines
Don't send DTMF for infinite time if we do not receive an END event.
I thought that this was going to end up being a pretty gnarly fix, but it turns
out that there was actually already a configuration option in rtp.conf,
dtmftimeout, that was intended to handle this situation. However, in between
Asterisk 1.2 and Asterisk 1.4, the code that processed the option got lost.
So, this commit brings it back to life.
The default timeout is 3 seconds. However, it is worth noting that having
this be configurable at all is not really the recommended behavior in RFC 2833.
From Section 3.5 of RFC 2833:
Limiting the time period of extending the tone is necessary
to avoid that a tone "gets stuck". Regardless of the
algorithm used, the tone SHOULD NOT be extended by more than
three packet interarrival times. A slight extension of tone
durations and shortening of pauses is generally harmless.
Three seconds will pretty much _always_ be far more than three packet
interarrival times. However, that behavior is not required, so I'm going to
leave it with our legacy behavior for now.
Code from svn/asterisk/team/russell/issue_14460
(closes issue #14460)
Reported by: moliveras
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@175126 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r162656 | file | 2008-12-10 12:06:59 -0400 (Wed, 10 Dec 2008) | 13 lines
Merged revisions 162653 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162653 | file | 2008-12-10 12:05:29 -0400 (Wed, 10 Dec 2008) | 6 lines
Increment the sequence number on the end packets for RFC2833. After reading the RFC some more and doing some testing I agree with this change.
(closes issue #12983)
Reported by: vt
Patches:
dtmf_inc_seqnum_on_end_pkts.diff uploaded by vt (license 520)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@162657 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r162205 | file | 2008-12-09 15:48:35 -0400 (Tue, 09 Dec 2008) | 14 lines
Merged revisions 162204 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162204 | file | 2008-12-09 15:47:07 -0400 (Tue, 09 Dec 2008) | 7 lines
Make sure that the timestamp for DTMF is not the same as the previous voice frame and do not send audio when transmitting DTMF as this confuses some equipment.
(closes issue #13209)
Reported by: ip-rob
Patches:
13209.diff uploaded by file (license 11)
Tested by: ip-rob, bujones
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@162206 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r161014 | jpeeler | 2008-12-04 12:32:20 -0600 (Thu, 04 Dec 2008) | 17 lines
Merged revisions 161013 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r161013 | jpeeler | 2008-12-04 12:30:41 -0600 (Thu, 04 Dec 2008) | 9 lines
(closes issue #13835)
Reported by: matt_b
Tested by: jpeeler
This mirrors a check that was present in ast_rtp_read to also be in ast_rtp_raw_write to not schedule sending the receiver report if the remote RTCP endpoint address isn't present in the RTCP structure.
Closes AST-142.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@161015 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r147807 | murf | 2008-10-09 08:17:33 -0600 (Thu, 09 Oct 2008) | 15 lines
(closes issue #13557)
Reported by: nickpeirson
Patches:
pbx.c.patch uploaded by nickpeirson (license 579)
replace_bzero+bcopy.patch uploaded by nickpeirson (license 579)
Tested by: nickpeirson, murf
1. replaced all refs to bzero and bcopy to memset and memmove instead.
2. added a note to the CODING-GUIDELINES
3. add two macros to asterisk.h to prevent bzero, bcopy from creeping
back into the source
4. removed bzero from configure, configure.ac, autoconfig.h.in
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@147809 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r136063 | mmichelson | 2008-08-06 10:59:29 -0500 (Wed, 06 Aug 2008) | 24 lines
Merged revisions 136062 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136062 | mmichelson | 2008-08-06 10:58:40 -0500 (Wed, 06 Aug 2008) | 16 lines
Since adding the AST_CONTROL_SRCUPDATE frame type,
there are places where ast_rtp_new_source may be called
where the tech_pvt of a channel may not yet have an
rtp structure allocated. This caused a crash in chan_skinny,
which was fixed earlier, but now the same crash has been
reported against chan_h323 as well. It seems that the best
solution is to modify ast_rtp_new_source to not attempt to
set the marker bit if the rtp structure passed in is NULL.
This change to ast_rtp_new_source also allows the removal
of what is now a redundant pointer check from chan_skinny.
(closes issue #13247)
Reported by: pj
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@136064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r129437 | mmichelson | 2008-07-09 14:40:30 -0500 (Wed, 09 Jul 2008) | 21 lines
Merged revisions 129436 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r129436 | mmichelson | 2008-07-09 14:32:20 -0500 (Wed, 09 Jul 2008) | 13 lines
Fix a problem where inbound rfc2833 audio would be sent to the
core instead of being P2P bridged. When the core regenerated
the rfc2833 packet for the outbound leg, the SSRC would be different
than the RTP audio on the call leg causing DTMF detection issues on
the far end.
(closes issue #12955)
Reported by: tonyredstone
Patches:
dynamic_rtp.patch uploaded by tsearle (license 373)
Tested by: tonyredstone
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@129438 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r110020 | file | 2008-03-19 15:25:33 -0300 (Wed, 19 Mar 2008) | 14 lines
Merged revisions 110019 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r110019 | file | 2008-03-19 15:20:28 -0300 (Wed, 19 Mar 2008) | 6 lines
Make sure that the mark bit does not incorrectly cause video frame timestamps to be calculated as if they are audio frames.
(closes issue #11429)
Reported by: sperreault
Patches:
11429-frametype.diff uploaded by qwell (license 4)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@110021 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r106501 | russell | 2008-03-06 18:24:58 -0600 (Thu, 06 Mar 2008) | 28 lines
Merge changes from team/russell/g722-sillyness ...
Fix a number of other places where the number of samples in a G722 frame was
not properly handled because of various reasons.
main/rtp.c:
- When a G722 frame is read from the smoother, the number of samples in the
frame must be divided by 2 before being sent out over the network. Even
though G722 is 16 kHz, an error in some previous spec has made it so that
we have to list the number of samples such as if it was 8 kHz.
main/file.c:
- When scheduling the next time to expect a frame, take into account that the
format of the file we're reading from may not be 8 kHz.
codecs/codec_g722.c:
- When converting from G722 to slinear, g722_decode() expects its samples
parameter to be in the silly (real samples / 2) format. Make it so.
- When converting from slinear to G722, properly set the number of samples in
the frame to be the number of bytes of output * 2.
formats/format_pcm.c:
- This format module handles G722, among a number of other formats. However,
the read() and seek() functions did not account for the fact that G722 has
2 samples per byte.
(closes issue #12130, reported by rickross, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@106502 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r105933 | russell | 2008-03-04 19:54:16 -0600 (Tue, 04 Mar 2008) | 13 lines
Merged revisions 105932 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105932 | russell | 2008-03-04 19:52:18 -0600 (Tue, 04 Mar 2008) | 5 lines
Fix a bug that I just noticed in the RTP code. The calculation for setting the
len field in an ast_frame of audio was wrong when G.722 is in use. The len field
represents the number of ms of audio that the frame contains. It would have
set the value to be twice what it should be.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@106310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r105675 | file | 2008-03-04 12:08:42 -0600 (Tue, 04 Mar 2008) | 16 lines
Merged revisions 105674 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r105674 | file | 2008-03-04 14:05:28 -0400 (Tue, 04 Mar 2008) | 8 lines
When a new source of audio comes in (such as music on hold) make sure the marker bit gets set.
(closes issue #10355)
Reported by: wdecarne
Patches:
10355.diff uploaded by file (license 11)
(closes issue #11491)
Reported by: kanderson
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@106299 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r103780 | tilghman | 2008-02-18 11:31:52 -0600 (Mon, 18 Feb 2008) | 9 lines
When a SIP channel is being auto-destroyed, it's possible for it to still be
in bridge code. When that happens, we crash. Delay the RTP destruction until
the bridge is ended.
(closes issue #11960)
Reported by: norman
Patches:
20080215__bug11960__2.diff.txt uploaded by Corydon76 (license 14)
Tested by: norman
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103781 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r100465 | tilghman | 2008-01-27 15:59:53 -0600 (Sun, 27 Jan 2008) | 11 lines
When deleting a task from the scheduler, ignoring the return value could
possibly cause memory to be accessed after it is freed, which causes all
sorts of random memory corruption. Instead, if a deletion fails, wait a
bit and try again (noting that another thread could change our taskid
value).
(closes issue #11386)
Reported by: flujan
Patches:
20080124__bug11386.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76, flujan, stuarth`
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@100488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
