https://origsvn.digium.com/svn/asterisk/trunk
................
r182847 | russell | 2009-03-17 21:28:55 -0500 (Tue, 17 Mar 2009) | 52 lines
Merged revisions 182810 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r182810 | russell | 2009-03-17 21:09:13 -0500 (Tue, 17 Mar 2009) | 44 lines
Fix cases where the internal poll() was not being used when it needed to be.
We have seen a number of problems caused by poll() not working properly on
Mac OSX. If you search around, you'll find a number of references to using
select() instead of poll() to work around these issues. In Asterisk, we've
had poll.c which implements poll() using select() internally. However, we
were still getting reports of problems.
vadim investigated a bit and realized that at least on his system, even
though we were compiling in poll.o, the system poll() was still being used.
So, the primary purpose of this patch is to ensure that we're using the
internal poll() when we want it to be used.
The changes are:
1) Remove logic for when internal poll should be used from the Makefile.
Instead, put it in the configure script. The logic in the configure
script is the same as it was in the Makefile. Ideally, we would have
a functionality test for the problem, but that's not actually possible,
since we would have to be able to run an application on the _target_
system to test poll() behavior.
2) Always include poll.o in the build, but it will be empty if AST_POLL_COMPAT
is not defined.
3) Change uses of poll() throughout the source tree to ast_poll(). I feel
that it is good practice to give the API call a new name when we are
changing its behavior and not using the system version directly in all cases.
So, normally, ast_poll() is just redefined to poll(). On systems where
AST_POLL_COMPAT is defined, ast_poll() is redefined to ast_internal_poll().
4) Change poll() in main/poll.c to be ast_internal_poll().
It's worth noting that any code that still uses poll() directly will work fine
(if they worked fine before). So, for example, out of tree modules that are
using poll() will not stop working or anything. However, for modules to work
properly on Mac OSX, ast_poll() needs to be used.
(closes issue #13404)
Reported by: agalbraith
Tested by: russell, vadim
http://reviewboard.digium.com/r/198/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@182945 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r152969 | tilghman | 2008-10-30 15:35:46 -0500 (Thu, 30 Oct 2008) | 10 lines
Merged revisions 152958 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r152958 | tilghman | 2008-10-30 15:33:28 -0500 (Thu, 30 Oct 2008) | 3 lines
Cannot join detached threads. See http://www.opengroup.org/onlinepubs/000095399/functions/pthread_join.html
(Closes issue #13400)
........
................
r153122 | tilghman | 2008-10-31 11:35:21 -0500 (Fri, 31 Oct 2008) | 10 lines
Merged revisions 153114 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r153114 | tilghman | 2008-10-31 11:30:32 -0500 (Fri, 31 Oct 2008) | 3 lines
Turn off qualify on uncached realtime peers.
(Closes issue #13383)
........
................
r154264 | tilghman | 2008-11-04 12:59:48 -0600 (Tue, 04 Nov 2008) | 10 lines
Recorded merge of revisions 154263 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r154263 | tilghman | 2008-11-04 12:58:05 -0600 (Tue, 04 Nov 2008) | 3 lines
Make the monitor thread non-detached, so it can be joined (suggested by Russell
on -dev list).
........
................
r154268 | rmudgett | 2008-11-04 13:07:26 -0600 (Tue, 04 Nov 2008) | 11 lines
Merged revisions 154266 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r154266 | rmudgett | 2008-11-04 13:01:08 -0600 (Tue, 04 Nov 2008) | 4 lines
JIRA ABE-1703
mISDN sets the channel to the wrong state when it receives
the indication AST_CONTROL_RINGING.
........
................
r154366 | tilghman | 2008-11-04 14:51:18 -0600 (Tue, 04 Nov 2008) | 16 lines
Merged revisions 154365 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r154365 | tilghman | 2008-11-04 14:49:33 -0600 (Tue, 04 Nov 2008) | 9 lines
On busy systems, it's possible for the values checked within a single line
of code to change, unless the structure is locked to ensure a consistent
state.
(closes issue #13717)
Reported by: kowalma
Patches:
20081102__bug13717.diff.txt uploaded by Corydon76 (license 14)
Tested by: kowalma
........
................
r155399 | tilghman | 2008-11-07 16:28:58 -0600 (Fri, 07 Nov 2008) | 14 lines
Merged revisions 155398 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r155398 | tilghman | 2008-11-07 16:27:32 -0600 (Fri, 07 Nov 2008) | 7 lines
Clarify error message.
(closes issue #13809)
Reported by: denke
Patches:
20081104__bug13809.diff.txt uploaded by Corydon76 (license 14)
Tested by: denke
........
................
r155863 | mmichelson | 2008-11-10 15:14:44 -0600 (Mon, 10 Nov 2008) | 22 lines
Merged revisions 155861 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r155861 | mmichelson | 2008-11-10 15:07:39 -0600 (Mon, 10 Nov 2008) | 14 lines
Channel drivers assume that when their indicate callback
is invoked, that the channel on which the callback was called
is locked. This patch corrects an instance in chan_agent where
a channel's indicate callback is called directly without first
locking the channel.
This was leading to some observed locking issues in chan_local,
but considering that all channel drivers operate under the
same expectations, the generic fix in chan_agent is the right
way to go.
AST-126
........
................
r156166 | russell | 2008-11-12 11:38:20 -0600 (Wed, 12 Nov 2008) | 15 lines
Merged revisions 156164 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156164 | russell | 2008-11-12 11:29:52 -0600 (Wed, 12 Nov 2008) | 7 lines
Move the sanity check that makes sure "always fork" is not set along with the
console option to be after the code that reads options from asterisk.conf.
This resolves a situation where Asterisk can start taking up 100% when
misconfigured.
(Thanks to Bryce Porter (x86 on IRC) for letting me log in to his system to
figure out what was causing the 100% CPU problem.)
........
................
r156295 | tilghman | 2008-11-12 13:28:22 -0600 (Wed, 12 Nov 2008) | 13 lines
Merged revisions 156294 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156294 | tilghman | 2008-11-12 13:26:45 -0600 (Wed, 12 Nov 2008) | 6 lines
If the SLA thread is not started, then reload causes a memory leak.
(closes issue #13889)
Reported by: eliel
Patches:
app_meetme.c.patch uploaded by eliel (license 64)
........
................
r156690 | tilghman | 2008-11-13 15:30:41 -0600 (Thu, 13 Nov 2008) | 14 lines
Merged revisions 156688 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156688 | tilghman | 2008-11-13 15:24:00 -0600 (Thu, 13 Nov 2008) | 7 lines
Provide more space for all the data which can appear in an originating
channel name.
(closes issue #13398)
Reported by: bamby
Patches:
manager.c.diff uploaded by bamby (license 430)
........
................
r156756 | tilghman | 2008-11-13 18:43:13 -0600 (Thu, 13 Nov 2008) | 13 lines
Merged revisions 156755 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156755 | tilghman | 2008-11-13 18:41:37 -0600 (Thu, 13 Nov 2008) | 6 lines
ast_waitfordigit() requires that the channel be up, for no good logical
reason. This prevents While/EndWhile from working within the "h"
extension.
Reported by: jgalarneau (for ABE C.2)
Fixed by: me
........
................
r158066 | mmichelson | 2008-11-20 11:39:06 -0600 (Thu, 20 Nov 2008) | 20 lines
Merged revisions 158053 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158053 | mmichelson | 2008-11-20 11:33:06 -0600 (Thu, 20 Nov 2008) | 12 lines
Make sure to set the hangup cause on the calling channel in the case
that ast_call() fails. For incoming SIP channels, this was causing
us to send a 603 instead of a 486 when the call-limit was reached on
the destination channel.
(closes issue #13867)
Reported by: still_nsk
Patches:
13867.diff uploaded by putnopvut (license 60)
Tested by: blitzrage
........
................
r158082 | mmichelson | 2008-11-20 11:54:31 -0600 (Thu, 20 Nov 2008) | 24 lines
Merged revisions 158071 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158071 | mmichelson | 2008-11-20 11:48:42 -0600 (Thu, 20 Nov 2008) | 16 lines
We don't handle 4XX responses to BYE well. According to
section 15 of RFC 3261, we should terminate a dialog if we
receive a 481 or 408 in response to our BYE. Since I am aware
of at least one phone manufacturer who may sometimes send a
404 as well, I am being liberal and saying that any 4XX response
to a BYE should result in a terminated dialog.
(closes issue #12994)
Reported by: pabelanger
Patches:
12994.patch uploaded by putnopvut (license 60)
Closes AST-129
........
................
r158540 | russell | 2008-11-21 16:12:37 -0600 (Fri, 21 Nov 2008) | 10 lines
Merged revisions 158539 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158539 | russell | 2008-11-21 16:05:55 -0600 (Fri, 21 Nov 2008) | 2 lines
When compiling with DEBUG_THREADS, report the real file/func/line for ao2_lock/ao2_unlock
........
................
r158602 | tilghman | 2008-11-21 17:14:11 -0600 (Fri, 21 Nov 2008) | 12 lines
Merged revisions 158600 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r158600 | tilghman | 2008-11-21 17:07:46 -0600 (Fri, 21 Nov 2008) | 5 lines
The passed extension may not be the same in the list as the current entry,
because we strip spaces when copying the extension into the structure.
Therefore, use the copied item to place the item into the list.
(found by lmadsen on -dev, fixed by me)
........
................
r159276 | tilghman | 2008-11-25 15:57:59 -0600 (Tue, 25 Nov 2008) | 14 lines
Merged revisions 159269 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r159269 | tilghman | 2008-11-25 15:56:48 -0600 (Tue, 25 Nov 2008) | 7 lines
Don't try to send a response on a NULL pvt.
(closes issue #13919)
Reported by: barthpbx
Patches:
chan_iax2.c.patch uploaded by eliel (license 64)
Tested by: barthpbx
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@160389 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r136063 | mmichelson | 2008-08-06 10:59:29 -0500 (Wed, 06 Aug 2008) | 24 lines
Merged revisions 136062 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r136062 | mmichelson | 2008-08-06 10:58:40 -0500 (Wed, 06 Aug 2008) | 16 lines
Since adding the AST_CONTROL_SRCUPDATE frame type,
there are places where ast_rtp_new_source may be called
where the tech_pvt of a channel may not yet have an
rtp structure allocated. This caused a crash in chan_skinny,
which was fixed earlier, but now the same crash has been
reported against chan_h323 as well. It seems that the best
solution is to modify ast_rtp_new_source to not attempt to
set the marker bit if the rtp structure passed in is NULL.
This change to ast_rtp_new_source also allows the removal
of what is now a redundant pointer check from chan_skinny.
(closes issue #13247)
Reported by: pj
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@136064 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
Merging this rev from trunk to 1.6.0 was not
simple. Why? Because we've enhanced trunk to
do a [fast] merge-and-delete operation which
also solved problems with contexts having
entries from different registrars.
Fast as in the amount of time the contexts
are locked down. That *is* fast, but traversing
the entire dialplan looking for priorities to
delete takes more time overall.
This particular fix involved pulling in those
enhancements from trunk, along with all the
various fixes and refinements made along the
way.
Merging all this from trunk into 1.6 involved:
a. mergetrunk6 in the stuff from 130145;
b. revert all but the prop changes
c. catalog all revisions to pbx.c since 1.6.0 was forked
(at rev 105596).
d. catalog all revisions to pbx.c in trunk since 1.6.0
was forked, making special note of all revs that
were not merged into 1.6.0.
e. study each rev in trunk not applied to 1.6.0, and
determine if it was involved in the merge_and_delete
enhancements in trunk. 25 commits were done in 1.6.0,
all but one (106306) was a merge from trunk.
Trunk had 22 additional changes, of which 7 were
involved in the merge_and_delete enhancements:
106757
108894
109169
116461
123358
130145
130297
f. Go to trunk and collect patches, one by one,
of the changes made by each rev across the
entire source tree, using svn diff -c <num> > pfile
g. Apply each patch in order to 1.6.0, and
resolve all failures and compilation problems
before proceding to the next patch.
h. test the stuff.
i. profit!
........
r130145 | murf | 2008-07-11 12:24:31 -0600 (Fri, 11 Jul 2008) | 40 lines
(closes issue #13041)
Reported by: eliel
Tested by: murf
(closes issue #12960)
Reported by: mnicholson
In this 'omnibus' fix, I **think** I solved both
the problem in 13041, where unloading pbx_ael.so
caused crashes, or incomplete removal of previous
registrar'ed entries. And I added code to completely
remove all includes, switches, and ignorepats that
had a matching registrar entry, which should
appease 12960.
I also added a lot of seemingly useless brackets
around single statement if's, which helped debug
so much that I'm leaving them there.
I added a routine to check the correlation between
the extension tree lists and the hashtab
tables. It can be amazingly helpful when you have
lots of dialplan stuff, and need to narrow
down where a problem is occurring. It's ifdef'd
out by default.
I cleaned up the code around the new CIDmatch code.
It was leaving hanging extens with bad ptrs, getting confused
over which objects to remove, etc. I tightened
up the code and changed the call to remove_exten
in the merge_and_delete code.
I added more conditions to check for empty context
worthy of deletion. It's not empty if there are
any includes, switches, or ignorepats present.
If I've missed anything, please re-open this bug,
and be prepared to supply example dialplan code.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@130946 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
Merged to 1.6 because it fixes a crash.
........
r114700 | mvanbaak | 2008-04-27 17:17:18 +0200 (Sun, 27 Apr 2008) | 8 lines
Make MWI in chan_skinny event based modeled after chan_zap and chan_mgcp.
(closes issue #12214)
Reported by: DEA
Patches:
chan_skinny-vm-events-v3.txt uploaded by DEA (license 3)
Tested by: DEA and me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@114701 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r109168 | mvanbaak | 2008-03-17 18:43:46 +0100 (Mon, 17 Mar 2008) | 11 lines
Update the directory of placed calls on skinny phones
when dialing a channel that does not provide progress (analog ZAP lines)
The phone does handle the double update on calls to channels that do
provide progress and wont insert duplicate items
(closes issue #12239)
Reported by: DEA
Patches:
chan_skinny-call-log.txt uploaded by DEA (license 3)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@109175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Note: NoAnswer support is currently not implemented, as it would take a
significant amount of work to figure out how to do correctly.
Closes issue #11310, patches, testing, and support by DEA, mvanbaak, and myself.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98776 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Refer to the proper documentation
- Implement separate signalling/media QoS/CoS in many channels using RTP
- Improve warnings and verbose messages
- Deprecate some old settings
Minor modifications by me, a big effort from IgorG.
Thanks!
Reported by: IgorG
Patches:
qoscleanup-89394-4-trunk.patch uploaded by IgorG (license 20)
Tested by: IgorG
(closes issue #11145)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93163 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove the AST_FORMAT_MAX_* types, as these are consuming 3 out of our available 32 bits.
- Add a native slin16 type, so that 16kHz codecs can translate without losing resolution.
(This doesn't affect anything immediately, until another codec has wb support.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89071 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a patch for it. It replaces a bunch of simple calls to snprintf with ast_copy_string
(closes issue #10843)
Reported by: Corydon76
Patches:
2007092900_10843.diff uploaded by mvanbaak (license 7)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@84173 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r79174 | file | 2007-08-13 11:18:04 -0300 (Mon, 13 Aug 2007) | 4 lines
(closes issue #10437)
Reported by: haklin
Don't set the callerid name and number a second time on a newly created channel. ast_channel_alloc itself already sets it and setting it twice would cause a memory leak.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@79175 65c4cc65-6c06-0410-ace0-fbb531ad65f3
