* Fix conditional in libasteriskssl.
* Use variables produced by configure to link the SSL and uuid libraries
into libasteriskpj.so instead of hard-coding them.
ASTERISK-27431
Change-Id: I3977931fd3ef8c4e4376349ccddb354eb839b58d
Mac doesn't like the comparison of -1 to an enum, so store the result of
ast_sip_str_to_dtmf to an int so we can check for the negative return
value. ast_sip_str_to_dtmf returns an int so this is only delaying the
implicit type cast.
Change-Id: I0c262c1719ee951aae1f437d733a301cf5f8ad29
OSX does not support 'readlink -f' or 'sed -r'. Replace readlink with
the GNU make macro 'realpath'. Replace sed with grep in one place, cut
in the other.
ASTERISK-27332
Change-Id: I5d34ecca905384decb22ead45c913ae5e8aff748
test_pbx used raise without explicitly including signal.h. On Mac for
some reason nothing else includes it.
test_logger checked if an unsigned int was negative. Switch the
variable to 'int' so that error check can be effective.
Change-Id: Ie1db5dd1818ac25cc2ae41b644f848b5865b1362
Some net-snmp builds do not provide the RONLY declare, only
NETSNMP_OLDAPI_RONLY. Map RONLY to NETSNMP_OLDAPI_RONLY to get around
this error.
Change-Id: Ida5c7ad9406515825485c4d3b4a34fd6ad0da577
It's impossible for gwtimeout or fdtimeout to be less than 0 because
they are unsigned int's. Remove checks and unreachable branches.
Change-Id: Ib2286960621e6ee245e40013c84986143302bc78
Declare 'res' initialized to -1 to deal with earlier error paths that
could cause 'res' to be returned uninitialized.
Change-Id: I8ac2a5755bf4174d89ef893e924c940f702b104e
Some clients do not send rtp packets every ptime ms. This can lead to
situations in which the rtp source learning algorithm will never learn
the address of the client. This has been discovered on a Mac mini with
a pjsip based softphone after updating to Sierra: as soon as USB
headsets are involved, the softphone will send the second packet 30ms
after the first, the third 30ms after the second and the fourth 1ms
after the third. So in the old implmentation the rtp source learning
algorithm was repeatedly reset on the fourth packet.
The patch changes the algorithm in a way that doesn't take the arrival
time between two consecutive packets into account but the time between
the first and the last packet of a learning sequence.
The patch also fixes a second problem: when a user was using a wrong
value for the probation setting there was a LOG_WARNING output stating
that the value had been set to the default value instead. However
the code for setting the value back to defaults was missing.
ASTERISK-27421 #close
Change-Id: If778fe07678a6fd2041eaca7cd78267d0ef4fc6c
Domains themselves can be up to 255 characters long (per RFC 1035), so
our current buffer sizes are wholly inadequate for many use cases.
Change-Id: If3f30a68307f1365a1fe06bc4b854c62842c9292
menuselect detects compiler support for multiple styles of weak
functions. This is a remnant from 2013 when OPTIONAL_API required weak
functions. It is no longer correct for menuselect to switch
dependencies from optional to required based on lack of weak function
support.
Note an issue remains - dependencies should switch from optional to
required based on OPTIONAL_API being enabled or disabled. I don't think
this is possible. menuselect needs to know at startup if OPTIONAL_API
is enabled or disabled, so the only way to fix this is to remove
OPTIONAL_API from menuselect and create a configure option. I've left
the code that switches in place but it's preprocessed out.
Additionally removed:
- WEAKREF variable from Asterisk makeopts.in.
- Related disabled code from test_utils.
- Pointless AC_REVISION call from menuselect/configure.ac.
Change-Id: Ifa702e5f98eb45f338b2f131a93354632a8fb389
Add checks for allocation errors, cleanup and report failure when they
occur.
* ast_duplicate_acl_list: Replace log warnings with errors, add missing
line-feed.
* ast_append_acl: Add missing line-feed to logger message.
* ast_append_ha: Avoid ast_strdupa in loop by moving debug message to
separate function.
* ast_ha_join: Use two separate calls to ast_str_append to avoid using
ast_strdupa in a loop.
Change-Id: Ia19eaaeb0b139ff7ce7b971c7550e85c8b78ab76
This patch causes a logger message to be the same as it is in 15+. This
will allow a follow-up patch to be cherry-picked to all 3 branches.
Change-Id: Ic0665a3d49987e4eb6df28dcd9e90b1c3ca191e0
This is a rewrite of ast_cli_completion_matches using a vector to build
the list. The original function calls the vector version, NULL
terminates the vector and extracts the elements array.
One change in behavior the results are now sorted and deduplicated. This
will solve bugs where some duplicate checking was done before the list
was sorted.
Change-Id: Iede20c5b4d965fa5ec71fda136ce9425eeb69519
This is a fun one.
Given the following attended transfer scenario:
1. Transfer target is called
2. Transferer hangs up
3. Transfer target call attempt reaches timeout
4. Transfer target is told to hang up
5. Transfer target answers before channel is hung up
6. Transferer recall target is called
A crash would occur. This is because the transfer target call
attempt, despite being told to hang up, would raise a recall
target answer before the recall target had been answered. As it
had not answered there would be no recall target channel and it
would implode.
This change makes it so that if the transfer target has been
hung up we don't tell the attended transfer code that it has
answered. We also clear out the stimulus that the recall target
has been answered after telling the transfer target to hang up,
in case it was able to raise the information before we told it
to hangup.
ASTERISK-27361
Change-Id: Ifb8b255a9c4d2c5c1b8ad77bf54f659ed286df99
We were not \0 terminating this string, so any attempt to print it would
in the best case show an empty string and in the worst case potentially
crash.
Change-Id: I63d96ef8f7516ac02a0f91e22dfa8acdc615042c
Memory corruption happened to the media frame caches when an audio hook
freed a frame when it shouldn't. I think the freed frame was because a
jitter buffer interpolated a missing frame and the audio hook
unconditionally freed it.
* Made audiohook.c:audio_audiohook_write_list() not free an interpolated
frame if it is the same frame as what was passed into the routine.
* Made plc.c:normalise_history() use memmove() instead of memcpy() on a
memory block that could overlap. Found by valgrind investigating this
issue.
ASTERISK-27238
ASTERISK-27412
Change-Id: I548d86894281fc4529aefeb9f161f2131ecc6fde
We've been calling pbx_builtin_setvar_helper to set the
RECORD_STATUS variable before actually closing the recorded file.
If a client is watching VarSet events and tries to do something with
the file when a RECORD_STATUS event is seen, they might attempt to
do so while the file it's still open.
We now delay calling pbx_builtin_setvar_helper until after we close
the file.
ASTERISK-27423
Change-Id: I7fe9de99953e46b4bafa2b38cf151fe8f6488254
The OUTPUTDIR environment variable can now be set either in the
environment itself or in ast_debug_tools.conf. If set, it's used
for all work products instead of /tmp.
Also added the --tarball-config option that includes the contents
of /etc/asterisk when either --tarball-coredumps or --tarball-results
are used.
Change-Id: I66b2553319df61caea5b313d084f51978f730b4c
Previously for PJSIP the local address of WebSocket connections
was set to the remote address. For logging purposes this is
not particularly useful.
The WebSocket API has been extended to allow the local
address to be queried and this is used in PJSIP to set the
local address to the correct value.
The PJSIP HEP support has also been tweaked so that reliable
transports always use the local address on the transport
and do not try to (wrongly) guess. As they are connection
based it is impossible for the source to be anything else.
ASTERISK-26758
ASTERISK-27363
Change-Id: Icd305fd038ad755e2682ab2786e381f6bf29e8ca
The remote console socket path is the combination of asterisk.conf
settings astrundir from [directories] and astctl from [files].
Unconditionally combine the two strings after processing all values
to ensure we end up with the correct socket path.
ASTERISK-27415
Change-Id: Ib1e2805d55d6b0955c6430a1a2a93acbf9b091e8
The default return code for pjsip_find_msg was PJ_SUCCESS so if
a Content-Length header wasn't found at all, pjsip_find_msg was
returning PJ_SUCCESS instead of PJSIP_EMISSINGHDR.
Also added the volatile keyword to a few variables that are used
both inside and outside the PJ_TRY/PJ_CATCH block.
Partial fix for ASTERISK_27408
Change-Id: If82ba9de921e3d57df9c68cf96ee45ccc1491f7a
Update from 2.7 to 2.7.1 for bundled pjproject. Changed version
and removed patch files included in the update.
Change-Id: I55cea8e734b318c2df9daf86aa0802c559ec8357
Some consumers of the sorcery API use ast_sorcery_retrieve_by_regex
only so that they can anchor the potential match as a prefix and not
because they truly need regular expressions.
Rather than using regular expressions for simple prefix lookups, add
a new operation - ast_sorcery_retrieve_by_prefix - that does them.
Patches against 13 and 15 have a compatibility layer needed to
maintain ABI that is not needed in master.
Change-Id: I56f4e20ba1154bd52281f995c27a429a854f6a79
* AST_VECTOR_STEAL_ELEMENTS - steal the array of elements for use
with non-vector code.
* struct ast_vector_string - a vector of 'char *'.
Change-Id: I104d1b204be03fccf67e02a195596adcb5ab1e42
This change causes the configure script to fail if the C compiler does
not support both function attributes constructor and destructor. These
were already required as modules cannot function without these attributes
and Asterisk requires modules.
This also has AST_GCC_ATTRIBUTE set a variable
ax_cv_have_func_attribute_$1. This is the same variable name used by
autoconf-archive's AX_GCC_FUNC_ATTRIBUTE, used for the same purpose.
Change-Id: Id68e8a1447f2a6d707c54b56350e7bfdb33fb663
