https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r307227 | jpeeler | 2011-02-09 13:52:12 -0600 (Wed, 09 Feb 2011) | 11 lines
Make sure to set parking dial context for non-default parking lots.
Since parking_con_dial isn't settable, set all parking lots to "park-dial".
(closes issue #17946)
Reported by: bluecrow76
Patches:
asterisk-1.8.0-beta4-multipark-fixes-2010SEP02.diff uploaded by bluecrow76 (license 270)
modified by me
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@307228 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code was reworked recently, and since the logchannel list hadn't been
created yet at this point, and it was a verbose message, it was being dropped
on the floor. Now it'll continue on to where it should be handled.
(closes issue #18580)
Reported by: pabelanger
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@307092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r306673 | twilson | 2011-02-07 14:40:20 -0800 (Mon, 07 Feb 2011) | 17 lines
Merged revisions 306672 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r306672 | twilson | 2011-02-07 14:35:20 -0800 (Mon, 07 Feb 2011) | 10 lines
Don't try to pickup a call in the middle of a masquerade
If A calls B which doesn't answer and C & D both try to do a call pickup, it is
possible for ast_pickup_call to answer the call, then fail to masquerade one of
the calls because the other one is already in the process of masquerading. This
patch checks to see if the channel is in the process of masquerading before
call before selecting it for a pickup.
Review: https://reviewboard.asterisk.org/r/1094/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306674 65c4cc65-6c06-0410-ace0-fbb531ad65f3
By waiting to call the callback macro after the CC_INTERFACES,
extension, priority, and context have been set, this information
can be accessed more easily within the callback macro.
Reported by Philippe Lindheimer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r306123 | jpeeler | 2011-02-03 14:49:48 -0600 (Thu, 03 Feb 2011) | 10 lines
Set exception on channel in parking thread when POLLPRI event detected.
This is done just to make the code be equivalent to the old select code. As
noted in 303106 the same issue was already fixed in this branch, but the
exception was not set on the channel in the case of POLLPRI. The reason that
this did not cause a problem here is because in 122923 the check in __ast_read
to check the exception flag was removed.
(related to #18637)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@306124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r305889 | rmudgett | 2011-02-02 18:15:07 -0600 (Wed, 02 Feb 2011) | 17 lines
Merged revisions 305888 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r305888 | rmudgett | 2011-02-02 18:02:43 -0600 (Wed, 02 Feb 2011) | 8 lines
Minor AST_FRAME_TEXT related issues.
* Include the null terminator in the buffer length. When the frame is
queued it is copied. If the null terminator is not part of the frame
buffer length, the receiver could see garbage appended onto it.
* Add channel lock protection with ast_sendtext().
* Fixed AMI SendText action ast_sendtext() return value check.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@305923 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The SIP sample configuration had "tlscadir" as the option name, but chan_sip
used the more correct "tlscapath". Now both are accepted.
Discovered (sort of) by a user on IRC in #asterisk
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@305247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This reduces the overall size of a mutex which was 3016 bytes before this back
down to 216 bytes (this is on 64-bit Linux with a glibc-implemented mutex).
The exactness of the numbers here may vary slightly based upon how mutexes are
implemented on a platform, but the long and short of it is that prior to this
commit, chan_iax2 held down 98MB of memory on a 64-bit system for nothing more
than a table of 32767 locks. After this commit, the same table occupies a mere
7MB of memory.
(closes issue #18194)
Reported by: job
Patches:
20110124__issue18194.diff.txt uploaded by tilghman (license 14)
Tested by: tilghman
Review: https://reviewboard.asterisk.org/r/1066
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@304950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are some cases where ast_append_ha() is called with a NULL instead of a
valid int pointer. So if we get a NULL, don't try to dereference it.
(closes issue #18162)
Reported by: imcdona
Patches:
issue0018162.patch uploaded by pabelanger (license 224)
Tested by: enegaard
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@304638 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r304096 | seanbright | 2011-01-25 20:24:58 -0500 (Tue, 25 Jan 2011) | 12 lines
Per the man page, setvbuf() must be called before any other operation on an open file.
We use setvbuf() to associate a buffer with a stream, but we have already written
to the open file. This works (by chance) on Linux, but fails on other platforms,
such as OpenSolaris.
(closes issue #16610)
Reported by: bklang
Patches:
setvbuf.patch uploaded by crjw (license 963)
Tested by: bklang, asgaroth, efutch
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@304097 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r304006 | rmudgett | 2011-01-25 17:25:32 -0600 (Tue, 25 Jan 2011) | 15 lines
Merged revisions 304005 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r304005 | rmudgett | 2011-01-25 17:21:09 -0600 (Tue, 25 Jan 2011) | 8 lines
DTMF attended transfers sometimes fail for no apparent reason.
The loop in feature_request_and_dial() can exit when Party C has answered
without processing an AST_CONTROL_ANSWER. Also sometimes an
AST_CONTROL_ANSWER never happens even though Party C has answered.
Don't hangup Party C if he is up or we receive an AST_CONTROL_ANSWER.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@304007 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r303548 | russell | 2011-01-24 14:49:53 -0600 (Mon, 24 Jan 2011) | 38 lines
Merged revisions 303546 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r303546 | russell | 2011-01-24 14:32:21 -0600 (Mon, 24 Jan 2011) | 31 lines
Fix channel redirect out of MeetMe() and other issues with channel softhangup.
Mantis issue #18585 reports that a channel redirect out of MeetMe() stopped
working properly. This issue includes a patch that resolves the issue by
removing a call to ast_check_hangup() from app_meetme.c. I left that in my
patch, as it doesn't need to be there. However, the rest of the patch fixes
this problem with or without the change to app_meetme.
The key difference between what happens before and after this patch is the
effect of the END_OF_Q control frame. After END_OF_Q is hit in ast_read(),
ast_read() will return NULL. With the ast_check_hangup() removed, app_meetme
sees this which causes it to exit as intended. Checking ast_check_hangup()
caused app_meetme to exit earlier in the process, and the target of the
redirect saw the condition where ast_read() returned NULL.
Removing ast_check_hangup() works around the issue in app_meetme, but doesn't
solve the issue if another application did the same thing. There are also
other edge cases where if an application finishes at the same time that a
redirect happens, the target of the redirect will think that the channel hung
up. So, I made some changes in pbx.c to resolve it at a deeper level. There
are already places that unset the SOFTHANGUP_ASYNCGOTO flag in an attempt to
abort the hangup process. My patch extends this to remove the END_OF_Q frame
from the channel's read queue, making the "abort hangup" more complete. This
same technique was used in every place where a softhangup flag was cleared.
(closes issue #18585)
Reported by: oej
Tested by: oej, wedhorn, russell
Review: https://reviewboard.asterisk.org/r/1082/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303549 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
..........
r303098 | rmudgett | 2011-01-20 12:11:45 -0600 (Thu, 20 Jan 2011) | 15 lines
CC_INTERFACES does not get built correctly with local channels.
If local channels are used with CCSS, CC_INTERFACES gets garbage prepended
to it so the CC recall fails. Also CC_INTERFACES gets "&(null)" appended
to it.
* Initialize the buffer to eliminate the prepended garbage.
* Filter out the empty interface strings to eliminate the latter.
* Added a diagnostic message if the CC_INTERFACES is ever empty.
JIRA ABE-2740
JIRA SWP-2848
..........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303153 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r303106 | sruffell | 2011-01-20 13:56:34 -0600 (Thu, 20 Jan 2011) | 15 lines
main/features: Use POLLPRI when waiting for events on parked channels.
This change resolves a regression in the 1.6.2 when converting from
select to poll. The DAHDI timers use POLLPRI to indicate that the timer
fired, but features was not waiting for that flag. The result was no
audio for MOH when a call was parked and res_timing_dahdi was in use.
This patch is slightly modified from the one on the mantis issue. It does
not set an exception on the channel if the POLLPRI flag is set.
(closes issue #18262)
Reported by: francesco_r
Patches:
patch_park_moh-trunk-2.txt uploaded by cjacobsen (license 1029)
Tested by: francesco_r, rfrantik, one47
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@303107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The intent of this check as it stands in previous versions of Asterisk was to
check if there are any active sessions. If there were no sessions, then the
function would return immediately and not bother with queueing up the manager
event to be processed. Since the conversion of storing sessions in an astobj2
container, this check will always pass. I changed it to go back to checking
what was intended.
The side effect of this was that if the AMI is disabled, the manager event
queue is populated anyway, but the code that runs to clear out the queue
never runs. A producer with no consumer is a bad thing.
Reported internally by kmorgan.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@302785 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302693 | rmudgett | 2011-01-19 15:25:41 -0600 (Wed, 19 Jan 2011) | 22 lines
Merged revisions 302671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302671 | rmudgett | 2011-01-19 15:21:56 -0600 (Wed, 19 Jan 2011) | 15 lines
DTMF transfer plays the wrong sounds for wrong number or other call failure.
* Set the default for features.conf.sample xferfailsound option to "beeperr"
as documented instead of "pbx-invalid" and corrected the use of it in DTMF
blind transfer (#1).
* Improved DTMF blind transfer handling of wrong numbers.
Most of the concerns in this issue were taken care of by the patch for
issue 17999: Issues with DTMF triggered attended transfers.
(closes issue #18379)
Reported by: gincantalupo
Tested by: rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@302713 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302599 | tilghman | 2011-01-19 14:13:24 -0600 (Wed, 19 Jan 2011) | 15 lines
Kill zombies.
When we ast_safe_fork() with a non-zero argument, we're expected to reap our
own zombies. On a zero argument, however, the zombies are only reaped when
there aren't any non-zero forked children alive. At other times, we
accumulate zombies. This code is forward ported from res_agi in 1.4, so that
forked children are always reaped, thus preventing an accumulation of zombie
processes.
(closes issue #18515)
Reported by: ernied
Patches:
20101221__issue18515.diff.txt uploaded by tilghman (license 14)
Tested by: ernied
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@302634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
........
r302265 | jpeeler | 2011-01-18 14:13:52 -0600 (Tue, 18 Jan 2011) | 27 lines
Convert device state callbacks to ao2 objects to fix a deadlock in chan_sip.
Lock scenario presented here:
Thread 1
holds ast_rdlock_contexts &conlock
holds handle_statechange hints
holds handle_statechange hint
waiting for cb_extensionstate
Locked Here: chan_sip.c line 7428 (find_call)
Thread 2
holds handle_request_do &netlock
holds find_call sip_pvt_ptr
waiting for ast_rdlock_contexts &conlock
Locked Here: pbx.c line 9911 (ast_rdlock_contexts)
Chan_sip has an established locking order of locking the sip_pvt and then
getting the context lock. So the as stated by the summary, the operations in
thread 2 have been modified to no longer require the context lock.
(closes issue #18310)
Reported by: one47
Patches:
statecbs_ao2.mk2.patch uploaded by one47 (license 23),
modified by me
Review: https://reviewboard.asterisk.org/r/1072/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@302266 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r302173 | rmudgett | 2011-01-18 12:07:15 -0600 (Tue, 18 Jan 2011) | 95 lines
Merged revisions 302172 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r302172 | rmudgett | 2011-01-18 12:04:36 -0600 (Tue, 18 Jan 2011) | 88 lines
Issues with DTMF triggered attended transfers.
Issue #17999
1) A calls B. B answers.
2) B using DTMF dial *2 (code in features.conf for attended transfer).
3) A hears MOH. B dial number C
4) C ringing. A hears MOH.
5) B hangup. A still hears MOH. C ringing.
6) A hangup. C still ringing until "atxfernoanswertimeout" expires.
For v1.4 C will ring forever until C answers the dead line. (Issue #17096)
Problem: When A and B hangup, C is still ringing.
Issue #18395
SIP call limit of B is 1
1. A call B, B answered
2. B *2(atxfer) call C
3. B hangup, C ringing
4. Timeout waiting for C to answer
5. Recall to B fails because B has reached its call limit.
Because B reached its call limit, it cannot do anything until the transfer
it started completes.
Issue #17273
Same scenario as issue 18395 but party B is an FXS port. Party B cannot
do anything until the transfer it started completes. If B goes back off
hook before C answers, B hears ringback instead of the expected dialtone.
**********
Note for the issue #17273 and #18395 fix:
DTMF attended transfer works within the channel bridge. Unfortunately,
when either party A or B in the channel bridge hangs up, that channel is
not completely hung up until the transfer completes. This is a real
problem depending upon the channel technology involved.
For chan_dahdi, the channel is crippled until the hangup is complete.
Either the channel is not useable (analog) or the protocol disconnect
messages are held up (PRI/BRI/SS7) and the media is not released.
For chan_sip, a call limit of one is going to block that endpoint from any
further calls until the hangup is complete.
For party A this is a minor problem. The party A channel will only be in
this condition while party B is dialing and when party B and C are
conferring. The conversation between party B and C is expected to be a
short one. Party B is either asking a question of party C or announcing
party A. Also party A does not have much incentive to hangup at this
point.
For party B this can be a major problem during a blonde transfer. (A
blonde transfer is our term for an attended transfer that is converted
into a blind transfer. :)) Party B could be the operator. When party B
hangs up, he assumes that he is out of the original call entirely. The
party B channel will be in this condition while party C is ringing, while
attempting to recall party B, and while waiting between call attempts.
WARNING:
The ATXFER_NULL_TECH conditional is a hack to fix the problem. It will
replace the party B channel technology with a NULL channel driver to
complete hanging up the party B channel technology. The consequences of
this code is that the 'h' extension will not be able to access any channel
technology specific information like SIP statistics for the call.
ATXFER_NULL_TECH is not defined by default.
**********
(closes issue #17999)
Reported by: iskatel
Tested by: rmudgett
JIRA SWP-2246
(closes issue #17096)
Reported by: gelo
Tested by: rmudgett
JIRA SWP-1192
(closes issue #18395)
Reported by: shihchuan
Tested by: rmudgett
(closes issue #17273)
Reported by: grecco
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1047/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@302174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r301594 | mnicholson | 2011-01-12 12:50:31 -0600 (Wed, 12 Jan 2011) | 15 lines
Removed a usleep(1) that shouldn't be necessary in session_do, and removed the
ms_t member from the mansession_session structure.
Merged revisions 301591 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r301591 | mnicholson | 2011-01-12 12:39:03 -0600 (Wed, 12 Jan 2011) | 5 lines
Don't store the thread id for the manager session in the structure we pass to
the thread for the manager session.
ABE-2543
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@301595 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r301503 | jpeeler | 2011-01-12 12:11:49 -0600 (Wed, 12 Jan 2011) | 19 lines
Merged revisions 301502 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r301502 | jpeeler | 2011-01-12 12:10:42 -0600 (Wed, 12 Jan 2011) | 12 lines
Fix CPU spike when pressing DTMF after agent login.
The problem here is that DTMF was being continuously deferred and requeued
since ast_safe_sleep is called in a loop. There are serveral other places in the
code that sleeps and then loops in a similar fashion. Because of this fact I
opted to not defer DTMF any more, which will not affect the original fix:
https://reviewboard.asterisk.org/r/674
(closes issue #18130)
Reported by: rgj
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@301504 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r298957 | tilghman | 2010-12-17 17:30:55 -0600 (Fri, 17 Dec 2010) | 13 lines
Merged revisions 298905 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r298905 | tilghman | 2010-12-17 15:40:56 -0600 (Fri, 17 Dec 2010) | 6 lines
Let Asterisk find better backtrace information with libbfd.
The menuselect option BETTER_BACKTRACES, if enabled, will use libbfd to search
for better symbol information within both the Asterisk binary, as well as
loaded modules, to assist when using inline backtraces to track down problems.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@298960 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Instead of setting peer->cdr = NULL, set it to not post.
(closes issue #18415)
Reported by: macbrody
Patches:
patch-18415 uploaded by jsolares (license 1167)
Tested by: jsolares, twilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@297952 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r297824 | jpeeler | 2010-12-07 16:58:54 -0600 (Tue, 07 Dec 2010) | 19 lines
Merged revisions 297823 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r297823 | jpeeler | 2010-12-07 16:57:48 -0600 (Tue, 07 Dec 2010) | 12 lines
Revert code that changed SSRC for DTMF.
Some previous behavior was attempted to be restored, but mistakingly I did
not realize that the previous behavior was incorrect. This fixes DTMF not
being detected since DTMF shouldn't cause the SSRC to change.
(related to issue #17404)
(closes issue #18189)
(closes issue #18352)
Reported by: marcbou
Tested by: cmbaker82
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.8@297825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
