This change adds support to the JITTERBUFFER dialplan function
for audio and video synchronization. When enabled the RTCP SR
report is used to produce an NTP timestamp for both the audio and
video streams. Using this information the video frames are queued
until their NTP timestamp is equal to or behind the NTP timestamp
of the audio. The audio jitterbuffer acts as the leader deciding
when to shrink/grow the jitterbuffer when adaptive is in use. For
both adaptive and fixed the video buffer follows the size of the
audio jitterbuffer.
ASTERISK-28533
Change-Id: I3fd75160426465e6d46bb2e198c07b9d314a4492
It was possible for a frame to be re-inserted into a jitter buffer after it
had been removed from it. A case when this happened was if a frame was read
out of the jitterbuffer, passed to the translation core, and then multiple
frames were returned from said translation core. Upon multiple frames being
returned the first is passed on, but sebsequently "chained" frames are put
back into the read queue. Thus it was possible for a frame to go back into
the jitter buffer where this would cause problems.
This patch adds a flag to frames that are inserted into the channel's read
queue after translation. The abstract jitter buffer code then checks for this
flag and ignores any frames marked as such.
Change-Id: I276c44edc9dcff61e606242f71274265c7779587
Breaks many things until they can be reworked. A partial list:
chan_agent
chan_dahdi, chan_misdn, chan_iax2 native bridging
app_queue
COLP updates
DTMF attended transfers
Protocol attended transfers
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@389378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes the following:
* Unit tests for the abstract Jitter Buffer API. This includes both fixed
and adaptive flavors, testing nominal creation, frame input, frame retrieval,
resyncing; off nominal frame input overflow, out of order, and others.
* Tweaks to the abstract_jb API to remove the unnecessary resync_threshold
parameter from the create function (resync_threshold is already in the
struct passed into the create function)
* Ensure the fixed jitter buffer is empty before destroying it, to avoid an
ASSERT
* Don't "resync" the adaptive jitter buffer. The mechanism that was being
used actually causes the jitter buffer to think its being overflowed by going
around the jitterbuf API and attempting to 'resynch' it improperly. If a
resync is needed, the jitter buffer will do it properly by itself. Note that
this is only an optimization needed for trunk, as the worst that happens is
the loss of three voice packets before the adaptive jitter buffer will resync
anyway.
Review: https://reviewboard.asterisk.org/r/2035
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds 'const' tags to a number of Asterisk APIs where they are appropriate (where the API already demanded that the function argument not be modified, but the compiler was not informed of that fact). The list includes:
- CLI command handlers
- CLI command handler arguments
- AGI command handlers
- AGI command handler arguments
- Dialplan application handler arguments
- Speech engine API function arguments
In addition, various file-scope and function-scope constant arrays got 'const' and/or 'static' qualifiers where they were missing.
Review: https://reviewboard.asterisk.org/r/251/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@196072 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r135841 | mmichelson | 2008-08-05 19:25:10 -0500 (Tue, 05 Aug 2008) | 27 lines
Merging the issue11259 branch.
The purpose of this branch was to take into account
"burps" which could cause jitterbuffers to misbehave.
One such example is if the L option to Dial() were used
to inject audio into a bridged conversation at regular
intervals. Since the audio here was not passed through
the jitterbuffer, it would cause a gap in the jitterbuffer's
timestamps which would cause a frames to be dropped for a
brief period.
Now ast_generic_bridge will empty and reset the jitterbuffer
each time it is called. This causes injected audio to be handled
properly.
ast_generic_bridge also will empty and reset the jitterbuffer
if it receives an AST_CONTROL_SRCUPDATE frame since the change
in audio source could negatively affect the jitterbuffer.
All of this was made possible by adding a new public API call
to the abstract_jb called ast_jb_empty_and_reset.
(closes issue #11259)
Reported by: plack
Tested by: putnopvut
........
r135847 | mmichelson | 2008-08-05 19:27:54 -0500 (Tue, 05 Aug 2008) | 4 lines
Revert inadvertent changes to app_skel that occurred when
I was testing for a memory leak
........
r135850 | mmichelson | 2008-08-05 19:29:54 -0500 (Tue, 05 Aug 2008) | 3 lines
Remove properties that should not be here
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@135851 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to compat.h so it is always available - hopefully this will let
us reduce the number of inclusions of channel.h and frame.h
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents modifying the strings in the stored variables,
and catched a few instances where this was actually done.
Given the differences between trunk and 1.4 (and the fact that this
is effectively an API change) it is better to fix 1.4 independently.
These are
chan_sip.c::sip_register()
chan_skinny.c:: near line 2847
config.c:: near line 1774
logger.c::make_components()
res_adsi.c:: near line 1049
I may have missed some instances for modules that do not build here.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
use the \retval tag for documenting return values, fixing various warnings
when generating the documentation, and various other things.
(closes issue #10203, snuffy)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@75164 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- restructured build tree and makefiles to eliminate recursion problems
- support for embedded modules
- support for static builds
- simpler cross-compilation support
- simpler module/loader interface (no exported symbols)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@40722 65c4cc65-6c06-0410-ace0-fbb531ad65f3
allocated. These changes caused crashes when using a channel type that did
not support the jitterbuffer. Instead of fixing why it's crashing, I'm going
to implement this in a better way next week. The way I did it caused a
jitterbuffer to be allocated on every channel where the channel type supported
jitterbuffers, even if they were disabled.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
so that channels not using a jitterbuffer don't waste as much memory
- ensure that the channel drivers that use jitterbuffers can handle a failure
from configuring a jitterbuffer on a new channel because of a memory
allocation error
- On passing through these channel drivers, configure the jitterbuffer before
starting the PBX thread instead of afterwards. If the pbx fails to start for
whatever reason, this would have caused a crash.
- Also on passing, move the increase of the usecount to after all of the
possible failure conditions in the function
- fix a place where ast_update_use_count() was not called
- ensure that the owner channel pointer of the channel pvt strcutures is set to
NULL in failure conditions
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@35553 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a new implementation of a fixed size jitterbuffer, as well as support for the
existing adaptive jitterbuffer implementation. (issue #3854, Slav Klenov)
Thank you very much to Slav Klenov of Securax and all of the people involved
in the testing of this feature for all of your hard work!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@31052 65c4cc65-6c06-0410-ace0-fbb531ad65f3
