https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99540 | tilghman | 2008-01-22 10:54:06 -0600 (Tue, 22 Jan 2008) | 7 lines
Ensure that we can get an address even when we don't have a default route.
(closes issue #9225)
Reported by: junky
Patches:
20080122__bug9225.diff.txt uploaded by Corydon76 (license 14)
Tested by: oej, loloski, sergee
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99559 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99426 | mmichelson | 2008-01-21 17:55:26 -0600 (Mon, 21 Jan 2008) | 12 lines
Fixing an issue wherein monitoring local channels was not possible. During a channel
masquerade, the monitors on the two channels involved are swapped. In 99% of the cases
this results in the desired effect. However, if monitoring a local channel, this caused
the monitor which was on the local channel to get moved onto a channel which is immediately
hung up after the masquerade has completed. By swapping the monitors prior to the masquerade,
we avoid the problem by tricking the masquerade into placing the monitor back onto the channel
where we want it.
During the investigation of the issue, the channel's monitor was the only thing that was swapped
in such a manner which did not make sense to have done. All other variable swapping made sense.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99341 | tilghman | 2008-01-21 12:11:07 -0600 (Mon, 21 Jan 2008) | 8 lines
Permit the user to specify number of seconds that a connection may remain idle,
which fixes a crash on reconnect with the MyODBC driver.
(closes issue #11798)
Reported by: Corydon76
Patches:
20080119__res_odbc__idlecheck.diff.txt uploaded by Corydon76 (license 14)
Tested by: mvanbaak
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99350 65c4cc65-6c06-0410-ace0-fbb531ad65f3
is currently active for the Asterisk CLI, or to set it. Also, knock multiple device
support off of the to-do list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add support for multiple devices. All devices are configured in console.conf.
- Add "console list devices" CLI command to show configured devices. Also, changed
the old "list devices" to be "list available", which queries PortAudio for all
audio devices that are available for use.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99227 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r99127 | file | 2008-01-18 18:57:15 -0400 (Fri, 18 Jan 2008) | 2 lines
Remove the __ in front of the unused variable. This causes some compilers to freak out.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99128 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This set of changes introduces TCP and TLS support for chan_sip. There are various
new options in configs/sip.conf.sample that are used to enable these features. Also,
there is a document, doc/siptls.txt that describes some things in more detail.
This code was implemented by Brett Bryant and James Golovich. It was reviewed
by Joshua Colp and myself. A number of other people participated in the testing
of this code, but since it was done outside of the bug tracker, I do not have their
names. If you were one of them, thanks a lot for the help!
(closes issue #4903, but with completely different code that what exists there.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99085 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99081 | russell | 2008-01-18 15:37:21 -0600 (Fri, 18 Jan 2008) | 9 lines
Revert adding the packed attribute, as it really doesn't make sense why that
would do any good. Fix the real bug, which is to do the check to see if the
frame came from a translator at the beginning of ast_frame_free(), instead of
at the end. This ensures that it always gets checked, even if none of the
parts of the frame are malloc'd, and also ensures that we aren't looking at
free'd memory in the case that it is a malloc'd frame.
(closes issue #11792, reported by explidous, patched by me)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99079 | russell | 2008-01-18 15:22:21 -0600 (Fri, 18 Jan 2008) | 4 lines
Since we're relying on the offset between the frame and the beginning of the translator
pvt struct, set the packed attribute to make sure we get to the right place.
(potential fix for issue #11792)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
option is incorrectly passed to the transferee when built-in
attended transfers are used. There is still a problem with 'T',
but better to fix some problems than no problems while we work
on it.
(closes issue #7904)
Reported by: k-egg
Patches:
transfer-fix-trunk-r97657.diff uploaded by sergee (license 138)
Tested by: sergee, otherwiseguy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99026 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r99004 | russell | 2008-01-17 16:37:22 -0600 (Thu, 17 Jan 2008) | 10 lines
Have IAX2 optimize the codec translation path just like chan_sip does it. If
the caller's codec is in our codec list, move it to the top to avoid transcoding.
(closes issue #10500)
Reported by: stevedavies
Patches:
iax-prefer-current-codec.patch uploaded by stevedavies (license 184)
iax-prefer-current-codec.1.4.patch uploaded by stevedavies (license 184)
Tested by: stevedavies, pj, sheldonh
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@99006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the HTTP request for the config came in on and the SERVER_PORT to the
bindport setting in sip.conf. I've left in the ability to override these
options, because I can't always guess how someone might decide to do something
weird with what is available to them--although needing to is pretty unlikely.
Documentation was updated to reflect preference for not setting serveraddr,
serveriface, or serverport. Tested on Linux and OS X.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98988 65c4cc65-6c06-0410-ace0-fbb531ad65f3
logged into the database. This will allow more granularity of a decision
evaluated in the dialplan, then takes effect when posting the CDR.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
immediately at startup. Any commands in the startup_commands file in the Asterisk
config diretory will get executed.
(closes issue #11781)
Reported by: jamesgolovich
Patches:
asterisk-startupcmds.diff.txt uploaded by jamesgolovich (license 176)
-- With some changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98986 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r98982 | russell | 2008-01-16 16:36:24 -0600 (Wed, 16 Jan 2008) | 5 lines
Add an unused pointer to the ast_channel struct. This makes the ast_channel structure
retain the same size as it had in previous 1.4 releases. Also, all of the offsets for
members in the structure are still the same (except for the two pointers that got replaced
for the new spy/whisper architecture.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@98983 65c4cc65-6c06-0410-ace0-fbb531ad65f3
