* Made res_musiconhold.c always post the MusicOnHoldStart/MusicOnHoldStop
events when it actually starts/stops the music streams. This allows the
events to always happen when MOH starts/stops. The event posting code was
moved to the MOH alloc/release routines.
* Made channel_do_masquerade() stop any MOH on the original channel before
masquerading so the original channel will get a stop event with correct
information.
* Cleaned up a couple odd codings in moh_files_alloc() and moh_alloc()
dealing with the music state variable.
(issue ASTERISK-23311)
Reported by: Benjamin Keith Ford
Review: https://reviewboard.asterisk.org/r/3306/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes a bug where the code which changes the transport did not check whether
the message is going out over UDP or not before changing it. For TCP and TLS transports
we don't need to change the transport as the correct one is already chosen.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410471 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Due to how messages are handled within PJSIP it is not until a message is actually
sent that the destination is reliably known. This means that the addresses placed
within the message may not be of the interface the message is being sent out on.
This module determines what interface a message is being sent on and updates the
message to contain the correct address if applicable.
This module was tested by myself in a virtualized environment with multiple interfaces
and also by Kinsey Moore in the following configuration:
Networks:
* 10.24.16.0/21
** hard phone
** default gateway
* 10.24.64.0/21
** softphone with pjsip-based stack
Transport details:
bind address: 0.0.0.0
protocol: UDP
All endpoints were tested with explicitly configured transports and unconfigured transports.
This was tested with inbound and outbound calls, both of which were experiencing detrimental
effects from incorrect IP addresses in SIP messages. These effects were only experienced by the
soft phone on the 10.24.64.0 network since the messages to the hard phone on the 10.24.16.0
network had the correct IP address.
(closes issue ASTERISK-23020)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3102/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410451 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending a HTTP request that is handled by Asterisk with a large number of
Cookie headers could overflow the stack.
Another vulnerability along similar lines is any HTTP request with a
ridiculous number of headers in the request could exhaust system memory.
(closes issue ASTERISK-23340)
Reported by: Lucas Molas, researcher at Programa STIC, Fundacion; and Dr. Manuel Sadosky, Buenos Aires, Argentina
........
Merged revisions 410380 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410381 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change allows chan_sip to avoid creation of the channel and
consumption of associated file descriptors altogether if the inbound
request is going to be rejected anyway.
(closes issue ASTERISK-23373)
Reported by: Corey Farrell
Patches:
chan_sip-earlier-st-1.8.patch uploaded by Corey Farrell (license 5909)
chan_sip-earlier-st-11.patch uploaded by Corey Farrell (license 5909)
........
Merged revisions 410308 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change removes the assumption that an outgoing request will always
have an endpoint and makes the authenticate_qualify option work once again.
(closes issue ASTERISK-23210)
Reported by: Joshua Colp
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Calling strlen on a NULL string is explosive. This patch checks whether or not
the passed in string is NULL or zero length before checking to see if the
string is too long.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The config option help information has always parsed the <see-also> tags in the
XML documentation. Unfortunately, it just never bothered displaying them on
the CLI. With this patch, when you execute 'config show help [module] [obj]
[option]', it will display what other options are useful to you.
(closes issue ASTERISK-22008)
Reported by: Richard Mudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410209 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The one touch recording options have several see-also links between the
various configuration options. These were 'broken' by the snake casing
of those options. This patch corrects the see-also links such that they
reference the correct option names.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410194 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When retrieving data from a database or other realtime backend, it's quite
possible to retrieve variables that Asterisk does not care about but that
are legitimate to exist. Asterisk does not need to throw a hissy fit when
these variables are encountered but rather just filter them out.
Review: https://reviewboard.asterisk.org/r/3305
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410187 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A stasis cache entry now contains more than a single message/snapshot. It
contains messages/snapshots for the local entity as well as any remote
entities that post to the cached item. In addition callbacks can be
supplied when the cache is created to compute and post the aggregate
message/snapshot representing all entities stored in the cache entry.
* All stasis messages now have an eid to indicate what entity posted it.
* The stasis cache enhancements allow device state to cache and aggregate
the device states from local and remote entities in a single operation.
The cached aggregate device state is available immediately after it is
posted to the stasis bus. This improves performance by eliminating a
cache dump and associated ao2 container traversals to calculate the
aggregate state.
(closes issue ASTERISK-23204)
Reported by: Mark Michelson
Review: https://reviewboard.asterisk.org/r/3281/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410157 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a static realtime peer with qualify=yes is loaded, Asterisk will fail to
send an OPTIONS request due to the lastms being equal to 0. This results in
the peer being unable to receive calls from Asterisk because the status is
permanently UNKNOWN.
This patch allows an OPTIONS request to be sent during module load by
ignoring the lastms value on startup only.
Review: https://reviewboard.asterisk.org/r/3294/
(closes issue ASTERISK-17523)
Reported by: Maciej Krajewski
Tested by: wushumasters
patches:
realtime_fix_11.7.0.txt uploaded by Trevor Peirce (license 6112)
........
Merged revisions 410105 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410106 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I observed a crash in res_musiconhold on an Asterisk 11 system using realtime
MOH. Investigation of the backtrace showed a corrupt mohclass, implying that
it got destroyed before the code expected it to. I went looking for reference
counting errors that could have caused this crash and this patch this result.
It contains 2 changes.
1) Remove a usless block of code that was impossible to reach. There was even
a comment indicating that it was impossible to reach. The conditional includes
"!ast_test_flag(global_flags, MOH_CACHERTCLASSES)" and it's inside of an if
block with the opposite check "ast_test_flag(global_flags,
MOH_CACHERTCLASSES)". There's no good reason to keep it around.
2) A similar block to #1 contained a reference counting error. It stores
state->class in the local variable mohclass without increasing its reference
count. The reference count on mohclass is decremented at the end of the
function. This block of code probably very rarely runs, which would help
explain why this system was working fine for many months before experiencing a
crash.
Review: https://reviewboard.asterisk.org/r/3282/
........
Merged revisions 410043 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 410044 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410090 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Made exit a loop early on error in ast_sorcery_objectset_json_create().
* Removed some dead code in ast_sorcery_objectset_create2().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410028 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Attempting to link a NULL object into an ao2 container had been benign previously, but since
enabling DO_CRASH in the testsuite, this is now causing a crash. It's better to be right
here anyway.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410011 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@410006 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When acting as a T.38 fax gateway, res_fax_spandsp would at times cause a crash
in libspandsp. This would occur when, during fax tone detection, a ulaw/alaw
frame would be passed to modem_connect_tones_rx. That particular routine
expects the data to be in slin format. This patch looks at the frame type and,
if the data is ulaw/alaw, converts the format to slin before passing it to
modem_connect_tones_rx.
Review: https://reviewboard.asterisk.org/r/3296
(closes issue ASTERISK-20149)
Reported by: Alexandr Gordeev
Tested by: Michal Rybarik
patches:
spandsp_g711decode.diff uploaded by Michal Rybarik (license 6578)
........
Merged revisions 409990 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@409991 65c4cc65-6c06-0410-ace0-fbb531ad65f3
It is possible for a channel to be masqueraded out of a bridge which
means it may no longer have RTP glue to check upon leaving said bridge.
If this situation occurred (it's possible at least during dial and call
pickup) then Asterisk would crash. This change makes sure the glue is
checked before use.
(closes issue AST-1290)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@409900 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Added the queues and queue_members tables to the config alembic scripts.
* Added the CDR table alembic creation script. The CDR table is more of
an example for new setups since the actual table can be fully customized
in cdr_adaptive_odbc.conf.
(closes issue ASTERISK-23233)
Reported by: jmls
Review: https://reviewboard.asterisk.org/r/3227/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@409885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Several fixes for the WebSockets implementation in res/res_http_websocket.c
* Flush the websocket session FILE* as fwrite() may not actually guarantee sending
the data to the network. If we do not flush, it seems that buffering on the SSL
socket for outbound messages causes issues
* Refactored ast_websocket_read to take into account that SSL file descriptors
may be ready to read via fread() but poll() will not actually say so because
the data was already read from the network buffers and is now in the libc buffers
(closes issue ASTERISK-23099)
(closes issue ASTERISK-21930)
Review: https://reviewboard.asterisk.org/r/3248/
........
Merged revisions 409681 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@409697 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
rtp_engine: Clean up after a failed remote bridge
Upon failure of an INVITE transaction meant to initiate a remote native
bridge, rtp_engine.c would not clean up non-reference-counted bridge
instance pointers leaving a dangling pointer which was being used to
perform a local native bridge after the other channel had hung up. This
lead to dereferencing into freed memory and plenty of AO2 errors. This
change allows the remote native bridge loop to clean up properly when
the bridge fails.
(closes issue ASTERISK-23310)
Reported by: Jeremy Laine
........
Merged revisions 409521 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@409525 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change passes options to the UAS creation function. This in turn
sets up 100rel and session timer properties on the incoming session.
Reported by Julian Russell on asterisk-users mailing list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@409287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
