In r227276, a while loop was turned into a for loop. Unfortunately, a portion
of the while loop was left in the code such that, when a static gateway is
encountered in the list of MGCP gateways, the next gateway would be skipped.
At best, we would simply flip past a gateway; at worst, this could lead to a
crash.
ASTERISK-24500 #close
Reported by: Xavier Hienne
patches:
chan_mgcp.patch uploaded by Xavier Hienne (License 6657)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@427613 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When r426594 was made, it did not take into account a unit test that verified
that the function properly populated the unsupported buffer. The function
would previously memset the buffer if it detected it had any contents; since
this function can now be called iteratively on successive headers, the unit
tests would now fail. This patch updates the unit tests to reset the buffer
themselves between successive calls, and updates the documentation of the
function to note that this is now required.
........
Merged revisions 426858 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@426860 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The outboundproxy setting is currently ignored when sending OPTIONS requests
as a result of the qualify setting. This means that if an Asterisk server is
unable to send the packet directly to a peer, it is unable to qualify any
non-inbound registered peer (e.g. a peer SIP Trunk).
This patch grabs the outboundproxy information for a peer when a qualify
attempt is being constructed and, if it finds the information, uses it
when sending the OPTIONS request.
Review: https://reviewboard.asterisk.org/r/3948
ASTERISK-24063 #close
Reported by: Damian Ivereigh
patches:
outboundproxy-dai.patch uploaded by Damian Ivereigh (License 6632)
........
Merged revisions 425818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@425819 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a device re-INVITEs at the same time as the dialog is hung up, and
if then the ACK to the re-INVITE never reaches Asterisk, chan_sip would
fail to destroy the dialog after a while. This resulted in (most
prominently) file handle leaks.
(Patch reindented by me.)
ASTERISK-20784 #close
ASTERISK-15879 #close
Reported by: Torrey Searle, Nitesh Bansal
Patches:
reinvite_ack_timeout.patch uploaded by Torrey Searle (License #5334)
patch_asterisk_20784.txt uploaded by Nitesh Bansal (License #6418)
Reviewboard: https://reviewboard.asterisk.org/r/4052/
(testcase can be found at r4051)
........
Merged revisions 425068 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@425069 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The reporter on the issue found some issues when upgrading from version 10 to 11
on 55 hosts.
Two situations that can occur with dynamic registrations.
1. With dnsmgr disabled, if the host is not resolvable we are not trying to
resolve the host again when it is time to attempt to register again. This
results in never registering to the host.
2. With dnsmgr enabled, when the host is temporarily not resolvable the
address is set to 0.0.0.0:0 and then when the host is resolvable the port
is not being restored and stays set to 0.
This patch resolves these two issues by:
* Storing the hostname so that it can be used for resolving with DNS.
* Resolve the hostname on the next scheduled attempt to register.
* Storing the port used to reach the host so that when the hostname is
resolvable again, we can set the port again if the port is still unset after
looking up the host.
ASTERISK-23767 #close
Reported by: David Herselman
Tested by: David Herselman, Michael L. Young
Patches:
asterisk-23767-dns_reg_retry_and_set_port_11_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3856/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@422274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This code originally worked around an issue within res_rtp_asterisk itself.
The wrong socket was being used for the STUN check for RTCP, causing the
port to be the same as RTP. This was subsequently fixed and the RTCP port
provided for the ICE candidate is correct and does not need to be incremented.
ASTERISK-23997 #close
Reported by: Badalian Vyacheslav
Patches:
plus1.diff submitted by Badalian Vyacheslav (license 5249)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@421909 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a user does not provide a port in the fromdomain setting, chan_sip will set
the fromdomainport to STANDARD_SIP_PORT (5060). The fromdomainport value will
then get used unilaterally in certain places. This causes issues with TLS,
where the default port is expected to be 5061.
This patch modifies chan_sip such that fromdomainport is only used if it is
not the standard SIP port; otherwise, the port from the SIP pvt's recorded
self IP address is used.
Review: https://reviewboard.asterisk.org/r/3893/
ASTERISK-24178 #close
Reported by: Elazar Broad
patches:
fromdomainport_fix.diff uploaded by Elazar Broad (License 5835)
........
Merged revisions 421717 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@421718 65c4cc65-6c06-0410-ace0-fbb531ad65f3
sip_subscribe_mwi_destroy calls sip_destroy on the reference counted
mwi->call. This results in the fields of mwi->call being freed, but
mwi->call itself it leaked. If other code is still using mwi->call
it can cause problems. This change uses dialog_unref instead, to
balance the ref provided by sip_alloc().
ASTERISK-24087 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3834/
........
Merged revisions 419440 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@419441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The new inband_on_setup_ack option causes Asterisk to assume inband audio
may be present when a SETUP_ACKNOWLEDGE message is received.
Q.931 Section 5.1.3 says that in scenarios with overlap dialing, when a
dialtone is sent from the network side, progress indicator 8 "Inband info
now available" MAY be sent to the CPE if no digits were received with the
SETUP. It is thus implied that the ie is mandatory if digits came with
the SETUP and dialtone is needed. This option should be enabled, when the
network sends dialtone and you want to hear it, but the network doesn't
send the progress indicator when needed.
NOTE: For Q.SIG setups this option should be enabled when outgoing overlap
dialing is also enabled because Q.SIG does not send the progress indicator
with the SETUP ACK.
The commit -r413714 (AST-1338) which causes this issue was dealing with a
SIP-to-ISDN interoperability issue.
This commit is a merge of the two patches indicated below.
ASTERISK-23897 #close
Reported by: Pavel Troller
Patches:
pri-4.diff (license #6302) patch uploaded by Pavel Troller
jira_asterisk_23897_v11.patch (license #5621) patch uploaded by rmudgett
Review: https://reviewboard.asterisk.org/r/3633/
........
Merged revisions 417956 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417957 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip have also been added to allow behavior
to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417677 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is essentially a backport of a small portion of r397526 from
ASTERISK-21981. In that patch, pass through support and format attribute
negotiation was added for Opus. Part of that included being more tolerant to
whitespace in the fmtp line of an SDP; that part of the patch is being
applied here.
As the author of the backport pointed out, in SDP, the fmtp line is allowed to
include whitespace between attributes. RFC 3267 chapter 8.3 (from 2001)
includes an example for this. This was not removed in the updated RFC 4867 in
2007.
Review: https://reviewboard.asterisk.org/r/3658
ASTERISK-23916 #close
Reported by: Alexander Traud
patches:
sdpFMTPspace_Asterisk11.patch uploaded by Alexander Traud (License 6520)
........
Merged revisions 417587 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a client takes a long time to process information received from Asterisk,
a write operation using fwrite may fail to write all information. This causes
the underlying file stream to be in an unknown state, such that the socket
must be disconnected. Unfortunately, there are two problems with this in
Asterisk's existing websocket code:
1. Periodically, during the read loop, Asterisk must write to the connected
websocket to respond to pings. As such, Asterisk maintains a reference to
the session during the loop. When ast_http_websocket_write fails, it may
cause the session to decrement its ref count, but this in and of itself
does not break the read loop. The read loop's write, on the other hand,
does not break the loop if it fails. This causes the socket to get in a
'stuck' state, preventing the client from reconnecting to the server.
2. More importantly, however, is that the fwrite in ast_http_websocket_write
fails with a large volume of data when the client takes awhile to process
the information. When it does fail, it fails writing only a portion of
the bytes. With some debugging, it was shown that this was failing in a
similar fashion to ASTERISK-12767. Switching this over to ast_careful_fwrite
with a long enough timeout solved the problem.
ASTERISK-23917 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3624/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@417310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Simply establishing a TCP connection and never sending anything to the
configured HTTP port in http.conf will tie up a HTTP connection. Since
there is a maximum number of open HTTP sessions allowed at a time you can
block legitimate connections.
A similar problem exists if a HTTP request is started but never finished.
* Added http.conf session_inactivity timer option to close HTTP
connections that aren't doing anything. Defaults to 30000 ms.
* Removed the undocumented manager.conf block-sockets option. It
interferes with TCP/TLS inactivity timeouts.
* AMI and SIP TLS connections now have better authentication timeout
protection. Though I didn't remove the bizzare TLS timeout polling code
from chan_sip.
* chan_sip can now handle SSL certificate renegotiations in the middle of
a session. It couldn't do that before because the socket was non-blocking
and the SSL calls were not restarted as documented by the OpenSSL
documentation.
* Fixed an off nominal leak of the ssl struct in
handle_tcptls_connection() if the FILE stream failed to open and the SSL
certificate negotiations failed.
The patch creates a custom FILE stream handler to give the created FILE
streams inactivity timeout and timeout after a specific moment in time
capability. This approach eliminates the need for code using the FILE
stream to be redesigned to deal with the timeouts.
This patch indirectly fixes most of ASTERISK-18345 by fixing the usage of
the SSL_read/SSL_write operations.
ASTERISK-23673 #close
Reported by: Richard Mudgett
........
Merged revisions 415841 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@415854 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk started counting the session timer at INVITE while the other
end correctly started at 200. This meant that for short session-expiries
(90 seconds) combined with long ringing times (e.g. 30 seconds), asterisk
would wrongly assume that the timer was hit before the other end thought
it was time to send a session refresh. This resulted in prematurely
ended calls.
This changes the session timer to start counting first at 200 like RFC
says it should.
(Also removed a few excess NULL checks that would never hit, because if
they did, asterisk would have crashed already.)
ASTERISK-22551 #close
Reported by: i2045
Review: https://reviewboard.asterisk.org/r/3562/
........
Merged revisions 414620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414628 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Populate the CALLERID(ani2) value (and the special CALLINGANI2 channel
variable) with the ANI2 value in addition to the PRI specific ANI2 channel
variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@414050 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When overlap dialing is enabled, the lack of inband audio available
information in the SETUP_ACKNOWLEDGE events causes an interoperability
problem with SIP. sig_pri doesn't know if there is dialtone present when
a SETUP_ACKNOWLEDGE is received so it assumes it is there and posts an
AST_CONTROL_PROGRESS frame. The SIP channel driver then sends out a 183
Session Progress and blocks the desired 180 Ringing message when the
ALERTING message comes in.
* Made the configure script detect if the installed version of libpri
supports the SETUP_ACKNOWLEDGE enhancements.
* Using the new API, made generate an AST_CONTROL_PROGRESS frame on an
incoming SETUP_ACKNOWLEDGE message when the message indicates inband audio
is present instead of assuming that dialtone is present.
* Using the new API, made SETUP_ACKNOWLEDGE send out an inband audio
available indication only if dialtone is expected. The change also makes
the fallback behaviour of sending the PROGRESS message better by sending
it only if dialtone is expected.
* Changed receiving a PROCEEDING message to not generate an
AST_CONTROL_PROGRESS frame if the progress indication ie indicates
non-end-to-end-ISDN. This helps interoperability with SIP.
* Changed sending a PROCEEDING message in response to an
AST_CONTROL_PROCEEDING frame to not indicate inband audio available. It
was silly to do so anyway because the channel driver doesn't know if
inband audio is even available. This helps interoperability with SIP.
This patch and a corresponding change in libpri work together to allow
Asterisk to control the inband audio available progress indication ie on
the SETUP_ACKNOWLEDGE message when dialtone is present.
AST-1338 #close
Reported by: Tyler Stewart
Review: https://reviewboard.asterisk.org/r/3521/
........
Merged revisions 413714 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413765 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed early exit in sip_msg_send() not destroying the message iterator.
* Made ast_msg_var_iterator_next() and ast_msg_var_iterator_destroy()
tolerant of a NULL iter parameter in case ast_msg_var_iterator_init()
fails.
* Made ast_msg_var_iterator_destroy() clean up any current message data
ref.
* Made struct ast_msg_var_iterator, ast_msg_var_iterator_init(),
ast_msg_var_iterator_next(), ast_msg_var_unref_current(), and
ast_msg_var_iterator_destroy() use iter instead of i.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@413139 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r411189, some behavior was changed which made sendrpid behavior
act in a more trusting manner by sending full user data for peers
set with private caller presence in P-Asserted-Identity headers.
Since this changed long time expected behaviors, we decided to pull
that patch when that was pointed out by the community. Instead, this
patch provides a trust_id_outbound setting which will expose the data
per RFC-3325 if set to 'yes' and simply not send the PAI/RPID headers
at all if set to 'no'. By default trust_id_outbound will be set to
'legacy' which will preserve the behavior prior to these patches.
Extra special thanks to Walter Doekes for providing advice and
feedback.
(closes issue AST-1301)
(closes issue ASTERISK-19465)
Reported by: Krzysztof Chmielewski
Review: https://reviewboard.asterisk.org/r/3447/
........
Merged revisions 412744 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412746 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two issues when building on SmartOS:
- channels/chan_oss.c: it makes sure soundcard.h is found
- main/Makefile: only use "-Wl,--version-script" when GNU LD is used as the Sun
Linker doesn't support that. Similar checks are already used elswhere in the
Makefile
Review: https://reviewboard.asterisk.org/r/3426
ASTERISK-23576 #close
Reported by: Sebastian Wiedenroth
patches:
fix-sunos.diff uploaded by Sebastian Wiedenroth (License 6597)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412468 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Moved sip_pvt unref in ast_hangup() and handle_request_do() to the end
of the function. The unref needs to happen after the last use of the
pointer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
---
r411189 | jrose | 2014-03-26 10:50:48 -0500 (Wed, 26 Mar 2014) | 12 lines
chan_sip: Send real CallerID information with P-Assserted-Identity (RFC-3325)
Prior to this patch, the P-Asserted-Identity header would include anonymous
caller id information which seems to go against the point of the
P-Asserted-Identity header. Now the real caller ID information will be
included in this header. Also, no privacy header would be included.
This patch adds 'Privacy: id' to outgoing SIP messages that include the
P-Asserted-Identity header.
(closes issue AST-1301)
---
........
Merged revisions 412328 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
(1) It makes REF_DEBUG a meneselect item. Enabling REF_DEBUG now enables
REF_DEBUG globally throughout Asterisk.
(2) The ref debug log file is now created in the AST_LOG_DIR directory.
Every run will now blow away the previous run (as large ref files
sometimes caused issues). We now also no longer open/close the file
on each write, instead relying on fflush to make sure data gets written
to the file (in case the ao2 call being performed is about to cause a
crash)
(3) It goes with a comma delineated format for the ref debug file. This
makes parsing much easier. This also now includes the thread ID of the
thread that caused ref change.
(4) A new python script instead for refcounting has been added in the
contrib/scripts folder.
Review: https://reviewboard.asterisk.org/r/3377/
........
Merged revisions 412114 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@412115 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The masquerade supertest frequently fails because either the local channel
chain doesn't completely optimize out or the DTMF handshake doesn't
completely get accross. Local channel optimization requires frames
flowing to trigger when optimization can happen. When optimization
happens the media frame that triggered the optimization is dropped.
Sending DTMF requires frames to flow in the other direction for timing
purposes while sending nothing. If internal timing is not enabled when
MOH is playing, Asterisk switches to received timing when an audio frame
is received. With optimization dropping media frames and MOH not sending
frames unless it receives frames, occasionaly there are no more frames
being passed and the test fails.
* The asterisk command line -I option and the asterisk.conf
internal_timing option are removed. Asterisk now always uses internal
timing when needed if any timing module is loaded. The issue
ASTERISK-14861 did this quite awhile ago in v1.4 but effectively is broken
if other internal timing modules besides DAHDI are used. The
ast_read_generator_actions() now only does received timing if it has no
choice for frame generators like MOH, silence, and playback streaming.
* Cleaned up some code dealing with frame generators in
ast_deactivate_generator(), generator_write_format_change(),
ast_activate_generator(), and ast_channel_stop_silence_generator().
ASTERISK-22846 #close
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3414/
........
Merged revisions 411715 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@411716 65c4cc65-6c06-0410-ace0-fbb531ad65f3
