When a config file is read, an unescaped semicolon signals comments which are
stripped from the value before it's stored. Escaped semicolons are then
unescaped and become part of the value. Both of these behaviors are normal
and expected. When the config is serialized either by 'dialplan save' or
AMI/UpdateConfig however, the now unescaped semicolons are written as-is.
If you actually reload the file just saved, the unescaped semicolons are
now treated as start of comments.
Since true comments are stripped on read, any semicolons in
ast_variable.value must have been escaped originally. This patch
re-escapes semicolons in ast_variable.values before they're written to
file either by 'dialplan save' or config/ast_config_text_file_save which
is called by AMI/UpdateConfig. I also fixed a few pre-existing formatting
issues nearby in pbx_config.c
Tested-by: George Joseph
ASTERISK-20127 #close
Review: https://reviewboard.asterisk.org/r/4132/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@427328 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Depending on certain conditions it was possible for the hashtab counting thread
to starve other threads, preventing them from executing in the expected fashion.
This change adds a sleep to allow the others to do what they need to do. While
this doesn't thrash the hashtab as much as previously, it at least works.
(closes issue ASTERISK-22276)
Reported by: Matt Jordan
........
Merged revisions 396619 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@396620 65c4cc65-6c06-0410-ace0-fbb531ad65f3
XML encoding in chan_sip is accomplished by naively building the XML
directly from strings. While this usually works, it fails to take into
account escaping the reserved characters in XML.
This patch adds an 'ast_xml_escape' function, which works similarly to
'ast_uri_encode'. This is used to properly escape the local_display
attribute in XML formatted NOTIFY messages.
Several things to note:
* The Right Thing(TM) to do would probably be to replace the
ast_build_string stuff with building an ast_xml_doc. That's a much
bigger change, and out of scope for the original ticket, so I
refrained myself.
* It is with great sadness that I wrote my own ast_xml_escape
function. There's one in libxml2, but it's knee-deep in
libxml2-ness, and not easily used to one-off escape a
string.
* I only escaped the string we know is causing problems
(local_display). At least some of the other strings are
URI-encoded, which should be XML safe. Rather than figuring out
what's safe and escaping what's not, it would be much cleaner to
simply build an ast_xml_doc for the messages and let the XML
library do the XML escaping. Like I said, that's out of scope.
(closes issue ABE-2902)
Reported by: Guenther Kelleter
Tested by: Guenther Kelleter
Review: http://reviewboard.digium.internal/r/365/
........
Merged revision 378919 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 378933 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@378934 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Both hashtest and hashtest2 are manual testing apps that thrash hash
tables (hashtab and ao2 containers, respectively), by spinning up
several threads that randomly insert, delete, lookup and iterate over
the hash table. If the app doesn't crash, the hash table probably passes
the test. Those utils are not a part of the typical Asterisk build, so
they do not usually get compiled. This all makes them less that useful.
This patch removes those manual test programs and replaces them with
Asterisk unit test modules (test_{hashtab,astobj2}_thrash.so). It also
attempts to make the tests more deterministic.
* Rather than spinning up some number of threads that operate on the
hash table randomly, spin up four threads that concurrenly add,
remove, lookup and iterate over the hash table.
* Each thread checks the state of the hash table both during and after
execution, and indicates a test failure if things are not as expected.
* Each thread times out after 60 seconds to prevent deadlocking the unit
test run.
(closes issue ASTERISK-20505)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2189/
........
Merged revisions 376306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 376315 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@376339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Greenlight in #asterisk brought up that he was receiving an error message "Could
not create persistent member string, out of space" when running app_queue in
Asterisk 10. dump_queue_members() made an assumption that 8K would be enough to
store the generated string, but with queues that have large member lists this is
not always the case. This patch removes the limitation and uses ast_str instead
of a fixed sized buffer.
The complicating factor comes from the fact that ast_db_get requires a buffer
and buffer size argument, which doesn't let us pull back more than what we pass
in, so I introduced a new ast_db_get_allocated() which returns an ast_strdup()'d
copy of the value from astdb.
As an aside, I did some testing on the maximum size of data that we can store in
the BDB library we distribute and was able to store a 10MB string and retrieve
it with no problems, so I feel this is a safe patch.
Review: https://reviewboard.asterisk.org/r/2136/
........
Merged revisions 374108 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374135 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@374150 65c4cc65-6c06-0410-ace0-fbb531ad65f3
One of my recent commits broke this test. The error was:
[test_event.c:event_new_test:214]: Events expected to be identical
have different size: 69 != 59
The difference in size occurred because the first event had
the EID IE added to the event twice. ast_event_new() now always
adds it automatically. Previously it only added it if there
were no IEs specified, which was kind of weird.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370541 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Revision 370426 introduced the use of a nested function in tests/test_acl.c,
but the lack of the 'auto' scope specifier on the function and a forward
declaration resulted in compilation errors on the automated test systems.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370453 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Rules in ACLs (specified using 'permit' and 'deny') can now contain multiple
items (separated by commas), and items in the rule can be negated by prefixing
them with '!'. This simplifies Asterisk Realtime configurations, since it is no
longer necessray to control the order that the 'permit' and 'deny' columns are
returned from queries.
Review: https://reviewboard.asterisk.org/r/1592/
Initial patch contributed by Tilghman Lesher
Unit tests written by Kevin P. Fleming
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch includes the following:
* Unit tests for the abstract Jitter Buffer API. This includes both fixed
and adaptive flavors, testing nominal creation, frame input, frame retrieval,
resyncing; off nominal frame input overflow, out of order, and others.
* Tweaks to the abstract_jb API to remove the unnecessary resync_threshold
parameter from the create function (resync_threshold is already in the
struct passed into the create function)
* Ensure the fixed jitter buffer is empty before destroying it, to avoid an
ASSERT
* Don't "resync" the adaptive jitter buffer. The mechanism that was being
used actually causes the jitter buffer to think its being overflowed by going
around the jitterbuf API and attempting to 'resynch' it improperly. If a
resync is needed, the jitter buffer will do it properly by itself. Note that
this is only an optimization needed for trunk, as the worst that happens is
the loss of three voice packets before the adaptive jitter buffer will resync
anyway.
Review: https://reviewboard.asterisk.org/r/2035
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Allows the setting of flags via the config options api.
For example, code like this:
#define OPT1 1 << 0
#define OPT2 1 << 1
#define OPT3 1 << 2
struct thing {
unsigned int flags;
};
and a config like this:
[blah]
opt1=yes
opt2=no
opt3=yes
Review: https://reviewboard.asterisk.org/r/2004/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369454 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Added documentation describing what flags and arguments to pass to
aco_option_register for default option types. Also changed the ACL
handler to use the flags parameter to differentiate between "permit"
and "deny" instead of adding an additional vararg parameter.
Review: https://reviewboard.asterisk.org/r/1969/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The security events framework API was changed in Asterisk 10 but the unit tests
were not updated at the same time.
This patch does the following:
* Adds two more security events that were added to the API
* Add challenge, received_challenge and received_hash in the inval_password
security event unit test
(Closes issue ASTERISK-19760)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
issue-asterisk-19760-trunk.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/1897/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365248 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r364365 | twilson | 2012-04-27 17:31:01 -0500 (Fri, 27 Apr 2012) | 11 lines
Fix ast_parse_arg numeric type range checking and add tests
ast_parse_arg wasn't checking for strto* parse errors or limiting
the results by the actual range of the numeric types. This patch fixes
that and adds unit tests as well.
Review: https://reviewboard.asterisk.org/r/1879/
........
Merged revisions 364340 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
r364369 | twilson | 2012-04-27 17:33:10 -0500 (Fri, 27 Apr 2012) | 2 lines
Add missing test_config.c
........
Merged revisions 364365,364369 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@364397 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Security Events Framework API changed in trunk to support IPv6. This broke
the building of the security events test which was based around IPv4. This
patches fixes the build by changing the test to conform to the new changes.
(related to issue ASTERISK-19447)
Review: https://reviewboard.asterisk.org/r/1874/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@362432 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Global ao2 objects must always exist after initialization because there is
no access control to obtain another reference to the global object.
It is expected that module configuration could use these new API calls to
replace an active configuration parameter object with an updated
configuration parameter object.
With these new API calls, the global object could be replaced, removed, or
referenced without the risk of someone using a stale global object
pointer.
Review: https://reviewboard.asterisk.org/r/1824/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds unit tests for main/jitterbuf.c. This includes checking for
the following:
* Nominal insertion and retrieval of frames
* Insertion and retrieval of frames where the frames are inserted out of
order with respect to the previous frame
* Insertion and retrieval of frames where some number of frames that would
occur in the expected sequence are instead dropped
* Insertion and retrieval of frames with an arrival time that does not occur
at the same rate as the surrounding frames
* Resynchronization of the jitter buffer when an inserted frame breaks the
resynchronization threshold
* Overfilling of the jitter buffer
For each of the tests, both JB_TYPE_VOICE and JB_TYPE_CONTROL permutations
exist.
Review: https://reviewboard.asterisk.org/r/1815
(issue: ASTERISK-18964)
Reported by: Kris Shaw
Tested by: Kris Shaw, Matt Jordan
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@359406 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change restores functionality that was present in 1.4, when AEL macros
were implemented with the Macro dialplan application. Macros are fraught with
functionality issues, because they consume a large portion of the underlying
application stack. This limits the ability of AEL users to call many layers
of subroutines, an issue which Gosub does not have (originally tested to
100,000 levels deep). Therefore, starting in 1.6.0, AEL macros were
implemented with Gosub.
However, there were some implicit behaviors of Macro, which were not replicated
at the same time as with the transition to Gosub, one of which is documented in
the related issue. In particular, the "h" extension is designed to execute not
in the Macro context, but in the topmost calling context. Due to legacy issues
with a misapplied bugfix many years ago, when a macro exited in 1.4, it looks
in all calling contexts, bubbling up from the deepest level until it finds an
"h" extension.
Since AEL hides the complexity of the underlying dialplan logic from the AEL
programmer, it's reasonable to assume that this behavior should not change in
the transition from Asterisk 1.4 LTS to Asterisk 1.8 LTS, lest we break
working AEL configurations in the transition to Asterisk 1.8 LTS. This fix
is the result, which implements a search for the "h" extension in all calling
Gosub contexts.
Fixes ASTERISK-19336
Patch: 20120308__ael_bugfix_for_trunk__2.diff (License #5003) by Tilghman Lesher
(with slight modifications for 1.8)
Tested by: Johan Wilfer
Review: https://reviewboard.asterisk.org/r/1776/
........
Merged revisions 358810 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 358811 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@358812 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes case-sensitivity for device-specific subscriptions such that
the technology identifier is case-insensitive while the remainder of the device
string is still case-sensitive. This should also preserve the original case of
the device string as passed in to the event system. CCSS is the only feature
affected as it is the only consumer of device-specific event subscriptions.
The second part of this patch addresses similar case-sensitivity issues within
CCSS itself that prevented it from functioning correctly after the fix to the
events system.
This adds a unit test to verify that the event system works as expected.
(closes issue ASTERISK-19422)
Review: https://reviewboard.asterisk.org/r/1780/
........
Merged revisions 357940 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 357941 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Occasionally there is a need to put all objects in one container also into
another container.
Some reasons you might need to do this:
1) You need to reconfigure a container. You would do this by creating a
new container with the new configuration and ao2_container_dup the old
container into it. Then replace the old container with the new. Then
destroy the old container.
2) You need the contents of a container to remain stable while operating
on all of the objects. You would do this by creating a cloned container
of the original with ao2_container_clone. The cloned container is a
snapshot of the objects at the time of the cloning. When done, just
destroy the cloned container.
Review: https://reviewboard.asterisk.org/r/1746/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@357145 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the doubly linked list implementation. Now safe traversing can
insert before and after the current node when traversing in either
direction.
Updated the linked lists unit test test_linkedlist to also test doubly
linked lists. The old test_dlinkedlist requires a manual check of results
and probably should be removed.
Review: https://reviewboard.asterisk.org/r/1569/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@347110 65c4cc65-6c06-0410-ace0-fbb531ad65f3
AST_LIST_INSERT_BEFORE_CURRENT() could not be used twice in an iteration
or before AST_LIST_REMOVE_CURRENT() without corrupting the list.
AST_LIST_INSERT_BEFORE_CURRENT() could also corrupt the list if
AST_LIST_INSERT_BEFORE_CURRENT() or AST_LIST_REMOVE_CURRENT() is used on
the next iteration.
* Fixed cut and paste error using the wrong variable in
AST_LIST_INSERT_BEFORE_CURRENT().
* Added linked list unit tests for AST_LIST_INSERT_BEFORE_CURRENT(),
AST_LIST_APPEND_LIST(), and AST_LIST_INSERT_LIST_AFTER().
........
Merged revisions 342661 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 342662 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@342663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/10
................
r337974 | rmudgett | 2011-09-26 14:35:23 -0500 (Mon, 26 Sep 2011) | 37 lines
Merged revisions 337973 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r337973 | rmudgett | 2011-09-26 14:30:39 -0500 (Mon, 26 Sep 2011) | 30 lines
Fix deadlock when using dummy channels.
Dummy channels created by ast_dummy_channel_alloc() should be destoyed by
ast_channel_unref(). Using ast_channel_release() needlessly grabs the
channel container lock and can cause a deadlock as a result.
* Analyzed use of ast_dummy_channel_alloc() and made use
ast_channel_unref() when done with the dummy channel. (Primary reason for
the reported deadlock.)
* Made app_dial.c:dial_exec_full() not call ast_call() holding any channel
locks. Chan_local could not perform deadlock avoidance correctly.
(Potential deadlock exposed by this issue. Secondary reason for the
reported deadlock since the held lock was part of the deadlock chain.)
* Fixed some uses of ast_dummy_channel_alloc() not checking the returned
channel pointer for failure.
* Fixed some potential chan=NULL pointer usage in func_odbc.c. Protected
by testing the bogus_chan value.
* Fixed needlessly clearing a 1024 char auto array when setting the first
char to zero is enough in manager.c:action_getvar().
(closes issue ASTERISK-18613)
Reported by: Thomas Arimont
Patches:
jira_asterisk_18613_v1.8.patch (license #5621) patch uploaded by rmudgett
Tested by: Thomas Arimont
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@337975 65c4cc65-6c06-0410-ace0-fbb531ad65f3
