RTCP's calculation of the number of lost packets in an RTP stream is based on
that stream's sequence number count, the number of received packets, and how
many packets we expect to receive. When the SSRC for an RTP stream changes,
there can - and almost always will be - a large jump in the next packet's
timestamp and sequence number. If we don't reset the number of received
packets, sequence number count, and other metrics used by RTCP, the next RR/SR
report will use the previous SSRC's values to calculate the lost packet count
for the new SSRC - resulting in a very large number of lost packets.
This patch modifies res_rtp_asterisk such that, if it detects a SSRC change, it
will reset the various values used by the RTCP calculations. From the
perspective of RTCP, this appears as a new media stream - which is what it is.
Review: https://reviewboard.asterisk.org/r/2886/
(closes issue AST-1174)
Reported by: Thomas Arimont
........
Merged revisions 400089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400093 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In ASTERISK-17842, some additional library checks were added to the configure
script so that the bfd library could be found on CentOS and Fedora systems.
As it turns out, openSUSE requires an additional library. This patch adds
another check to the configure script for openSUSE that will add that library.
Review: https://reviewboard.asterisk.org/r/2885/
(closes issue AST-1169)
Reported by: Guenther Kelleter
........
Merged revisions 400073 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@400075 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When Asterisk receives a 200 OK in response to an invite, that peer should have
sent an SDP at some point by then. If the channel has never received an SDP,
media won't have been set and the remote address won't be known. Endpoints in
general should not be doing this. This patch makes it so that Asterisk will
simply hang up a call if it sends a 200 OK at this point. So far this odd
behavior for endpoints has only been observed in tests which involved manually
created SIP transactions in SIPp.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/
........
Merged revisions 399939 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399962 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The PRI and SS7 link control threads are not stopped correctly when the
chan_dahdi.so module is unloaded. The link control threads pri_dchannel()
and ss7_linkset() are not awakened from a poll() to cancel the thread.
* Added a SIGURG signal after requesting the thread cancel to break the
link control thread poll() immediately.
For SS7 it was slightly worse, the link poll() timeout would always be
whatever was the last libss7 scheduled event time used. If no libss7
scheduled event was pending, the thread could run more often than
necessary.
* Set nextms to 60 seconds for the ss7_linkset() poll() if there is no
other libss7 scheduled event.
........
Merged revisions 399818 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399834 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1st Issue
When a realtime peer sends an un-REGISTER request, Asterisk
un-registers the peer but the database table record still has regseconds and
fullcontact for the peer. This results in calls attempting to be routed to the
peer which is no longer registered. The expected behavior is to get
busy/congested when attempting to call an un-registered peer through the
dialplan.
What was discovered is that we are clearing out the peer's registration in the
database in parse_register_contact() when calling expire_register() but then
upon returning from parse_register_contact(), update_peer() is run which stores
back in the database table regseconds and fullcontact.
2nd Issue
The reporter pointed out that the 200 ok being returned by Asterisk
after un-registering a peer contains a Contact header with ;expires= and the
Expires header is not set to 0. This is actually a regression.
Tests were created for this second issue (ASTERISK-22548). The tests have been
reviewed and a Ship It! was received on those tests.
This patch does the following:
* Do not ignore the Expires header value even when it is set to 0. The patch
sets the pvt->expiry earlier on in the function so that it is set properly and
used.
* If pvt->expiry is 0, do not call update_peer since that means the peer has
already been un-registered and there is no need to update the database record
again since nothing has changed.
(closes issue ASTERISK-22428)
Reported by: Ben Smithurst
Tested by: Ben Smithurst, Michael L. Young
Patches:
asterisk-22428-rt-peer-update-and-expires-header.diff
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2869/
........
Merged revisions 399794 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399795 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a config object was allocated but one of its global objects was
never encountered, then the global object's defaults were never
applied. Ensure that global objects are initialized properly upon
allocation instead of on configuration.
Review: https://reviewboard.asterisk.org/r/2866/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399564 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixed a memory leak discovered in the logger where a temporary string buffer
was not being freed.
(closes issue ASTERISK-22540)
Reported by: John Hardin
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399513 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, Asterisk would incorrectly use the previous endpoint
addresses in SDP in spite of providing its own port. T38 is never meant to
be done through directmedia and Asterisk should always be in the media path
for these streams.
(closes issue ASTERISK-17273)
Reported by: Kevin Stewart
(closes issue ASTERISK-18706)
Reported by: Jeremy Kister
Review: https://reviewboard.asterisk.org/r/2853/
........
Merged revisions 399456 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399457 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Backported the following as applied to udptl.c:
* -r398020 Fixup udpdl defaults if config file not present.
* -r398533 Fixup improper use of ao2_global_obj_replace().
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399442 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adjusts '/'-to-'#' replacement to replace all instances of '/'
instead of just the first to ensure that the jitter buffer log file
gets the correct name as per Richard Kenner's suggestion.
(closes issue ASTERISK-21036)
Reported by: Richard Kenner
........
Merged revisions 399402 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399403 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If bridge_softmix fails to be created because no timing source is present in
Asterisk, this will currently fail gracefully but with (most likely) a generic
error message by whatever module tried to create the softmix bridge. This
patch adds a more explicit warning so you can actually diagnose and fix the
problem.
Review: https://reviewboard.asterisk.org/r/2857/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When processing the lines under the [applicationmap] context in features.conf, a
segfault occurs from attempting to process a line with an invalid syntax
(basically missing most of the arguments).
Example:
[applicationmap]
automon=*6
* This patch moves the checking for empty arguments to before they are accessed.
* Also, checked the "todo" comment and removed it. Some applications do not
require arguments.
(closes issue ASTERISK-22416)
Reported by: CGI.NET
Tested by: CGI.NET
Patches:
asterisk-22416-check-syntax-first_v2.diff by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2803
........
Merged revisions 399304 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The remote console continued to have issues with its output. In this case CLI
command output would either not show up (if verbose level = 0) or would contain
verbose prefixes (if verbose level > 0) once log messages were sent to the
remote console. The fix now now adds verbose prefix data to all new lines
contained in a verbose log string.
(closes issue ASTERISK-22450)
Reported by: David Brillert
(closes issue AST-1193)
Reported by: Guenther Kelleter
Review: https://reviewboard.asterisk.org/r/2825/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399267 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Confbridge would not properly tear down an empty conference bridge when all
users were kicked via end_marked=yes and at least one user was also set to
wait_marked. This occurred because while end_marked users were being kicked
and at least one was also set to wait_marked then the leave wait_marked handler
would be called on that user, but there would be no waiting user (still
considered active). The waiting users would decrement and now be negative. The
conference would remain, but be put into an inactive state. The solution was
to move from the active list to the wait list, those users with wait_marked set
right before kicking. This allows both the active and wait users to decrement
correctly and the confbridge to tear down properly.
A crashed also occurred when trying to list the specific conference from the CLI.
This happened because the conference specified was invalid. Since the
conference properly tears down now there is no way to reference it thus
alleviating the crash as well.
(closes issue ASTERISK-21859)
Reported by: Chris Gentle
Review: https://reviewboard.asterisk.org/r/2848/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a new IAX2 client registers, the astdb database is updated with the
value of minregexpire defined in iax.conf instead of using the expiry time
that is provided by the client. The provided expiry time of the client is
updated after inserting the astdb entry. As a consequence, restarting or
reloading asterisk creates clients whose registration may expire before
they reregister. The clients are therefore unavailable after minregexpire
seconds until they reregister.
* Move updating of the expiry time to before inserting into the astdb.
(closes issue ASTERISK-22504)
Reported by: Stefan Wachtler
Patches:
chan_iax2.c.patch (license #6533) patch uploaded by Stefan Wachtler
........
Merged revisions 399158 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@399159 65c4cc65-6c06-0410-ace0-fbb531ad65f3
You are adding dial strings to the queue, not channels. An aribitrary string
could be used, but you are typically referencing a channel. Correcting the
command help text.
(issue ASTERISK-22263)
(closes issue ASTERISK-22263)
Reported By: Rusty Newton
........
Merged revisions 398884 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If we receive a 200 OK without SDP, we will now check to see if
the remote address has been established for that channel's RTP
session and if the to tag for that channel has changed from
the most recent to tag in a response less than 200.
If either a change has been made since the last to-tag was
received or the remote address is unset, then we will drop
the call.
(closes issue ASTERISK-22424)
Reported by: Jonathan Rose
Review: https://reviewboard.asterisk.org/r/2827/diff/#index_header
........
Merged revisions 398835 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398836 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The denoise filter requires func_speex, not codec_speex. Fix this in the
description of the denoise=yes option in confbridge.conf.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398820 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes some long-standing bugs in debug threads that were
exacerbated with recent Optional API work in Asterisk 12.
With debug threads enabled, on some systems, there's a lock ordering
problem between our mutex and glibc's mutex protecting its module list
(Ubuntu Lucid, glibc 2.11.1 in this instance). In one thread, the module
list will be locked before acquiring our mutex. In another thread, our
mutex will be locked before locking the module list (which happens in
the depths of calling backtrace()).
This patch fixes this issue by moving backtrace() calls outside of
critical sections that have the mutex acquired. The bigger change was to
reentrancy tracking for ast_cond_{timed,}wait, which wrongly assumed
that waiting on the mutex was equivalent to a single unlock (it actually
suspends all recursive locks on the mutex).
(closes issue ASTERISK-22455)
Review: https://reviewboard.asterisk.org/r/2824/
........
Merged revisions 398648 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398649 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sometimes the Google Voice servers have a bad habit of sending out 1
byte replies to the xmpp resource. When a blank 1 byte reply is
received from the socket the buffer attempts to wait (endlessly) for
the rest of the reply from google which effectively blocks the socket
and google voice calls will no longer come into the server.
This patch allows the xmpp module to correctly detect empty packets and
send out ping replies to google. It also sets a socket timeout on the
default socket which prevents the xmpp socket from closing and
preventing future google voice calls from coming into the server.
Furthermore instead of sending an empty reply back to google we send a
proper xmpp ping reply back. This also adds several more
socket messages.
(closes issue ASTERISK-22347)
Reported by: Andrew Nagy
Review: https://reviewboard.asterisk.org/r/2771
Patches:
xmpp_fix_1.diff uploaded by Andrew Nagy (License #6524)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The mailbox and context are swapped on the receiving end for all users
of Jabber and XMPP distributed MWI in Asterisk 1.8 and all more recent
versions. This swaps those values to be correct when publishing to the
internal event system from Jabber/XMPP distributed MWI state.
(closes issue ASTERISK-22435)
Reported by: abelbeck
Tested by: Michael Keuter
Patches:
asterisk-1.8-res_jabber-aji_handle_pubsub_event.patch uploaded by abelbeck
asterisk-11-res_xmpp-xmpp_pubsub_handle_event.patch uploaded by abelbeck
........
Merged revisions 398523 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes the things in chan_h323 that were missed or ignored in the
great channel opaquification and gets chan_h323 back into a compiling
state.
(closes issue ASTERISK-22365)
Reported by: Dmitry Melekhov
Patches:
chan_h323.patch uploaded by Dmitry Melekhov
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398510 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix stray reference to idle_list in cleanup_thread_list(). This may be
the reason for the note in iax2_process_thread() about threads not being
removed from the task lists.
* Move cleanup_thread_list(&idle_list) to after the other lists are
cleaned up.
........
Merged revisions 398416 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398417 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix bridgecallno deadlock avoidance. When doing deadlock avoidance, you
need to retest the status of values for each loop to see if you still need
the lock for bridgecallno.
* As a safety check, after acquiring the bridgecallno lock you should
check if iaxs[bridgecallno] is NULL just like the current callno checks.
* Move setting thread->iostate to IAX_IOSTATE_IDLE to after processing any
deferred frames to ensure that the iostate is IDLE when it is placed back
into the idle list. defer_full_frame() tries to ensure
iax2_process_thread() wakes up to process the frame.
........
Merged revisions 398379 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398380 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fix the misdn debug output to remote consoles. chan_misdn uses
ast_console_puts() which doesn't know about verbose levels. Better to use
ast_verbose() instead. Without this patch the misdn debug messages are
appended to the verbose level which ever was set by the message sent to
the console before, i.e. any undefined level.
(closes issue AST-1218)
Reported by: Guenther Kelleter
Patches:
misdnlog.patch (license #6372) patch uploaded by Guenther Kelleter
........
Merged revisions 398235 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398236 65c4cc65-6c06-0410-ace0-fbb531ad65f3
ast_xmldoc_printable returns an allocated block that must be freed by the
caller. Fixed manager.c and res_agi.c to stop leaking these results.
(closes issue ASTERISK-22395)
Reported by: Corey Farrell
Patches:
manager-leaks-11.patch uploaded by coreyfarrell (license 5909)
res_agi-xmldoc-leaks.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 398060 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398061 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixed a features.c test that leaked a reference to a parked call. This caused
chancount to never reach 0, so graceful shutdown stops. Also added an
unregister test.
(closes issue ASTERISK-22413)
Reported by: Corey Farrell
Patches:
features-TEST_FRAMEWORK.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 398021 from http://svn.asterisk.org/svn/asterisk/branches/1.8
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/11@398022 65c4cc65-6c06-0410-ace0-fbb531ad65f3
