What I've done here is simply break up how a state NOTIFY is built. Originally both the XML and sip header information were built within the same function. While this does work, it does not allow for the creation of multipart/related message bodies that can contain multiple XML entries with only one sip header. Now a separate function builds the XML for each notify. This patch also makes maintaining and modifying state notifications in the future much less of a pain.
Review: http://reviewboard.digium.com/r/224/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188742 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This function incorrectly reported success even if the option was
unsupported. This was exposed by the options to change the underlying
channel format. The function now returns a failure if the option
is unsupported.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r188646 | dvossel | 2009-04-15 17:08:40 -0500 (Wed, 15 Apr 2009) | 12 lines
National prefix inserted even when caller ID not available
When the caller ID is restricted, the expected behavior is for the caller id to be blank. In chan_dahdi, the national prefix is placed onto the callers number even if its restricted (empty) causing the caller id to be the national prefix rather than blank.
(closes issue #13207)
Reported by: shawkris
Patches:
national_prefix.diff uploaded by dvossel (license 671)
Review: http://reviewboard.digium.com/r/220/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188647 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This introduces the 'z' option to app_dial. With it set, a call forward
will cancel any timeout originally set for this instance of the Dial
application.
AST-207
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the companion commit to libpri r732. Service messages are now supported
for switch types 4ess/5ess. A new option service_message_support has been added
to chan_dahdi.conf and is noted in the sample config file. The service message
support is turned off by default. The current implementation relies on AstDB
to keep track of channel state, which allows the statuses to be preserved
across Asterisk restarts. Below is a description of the storage format.
The state and reason for the service state are in the form <state>:<reason>,
where:
<state> ::= { 'O' } // 'O' – Out Of Service
<reason> ::= { '0' | '1' | '2' | '3' }, where:
'0' – No reason (backwards compatibility)
'1' – NEAR END
'2' – FAR END
'3' – both NEAR and FAR END
The new CLI commands to handle channel service state are:
pri service disable channel <chan>
pri service enable channel <chan>
Many people contributed to the development of this functionality. Because I
entered at the very end I do not know the exact history. Special thanks to
all who moved the bug forward one way or another:
cmaj, PCadach, markster, mattf, drmac, MikeJ, serge-v, murf, kanelbullar, Seb7,
tilghman, lmadsen, and especially dhubbard (he answered lots of my questions
and did a large portion of the work)
(closes issue #3450)
Reported by: cmaj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188342 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Per discussion with oej on IRC we need the actual IP address, not the
outbound proxy IP address, in the sa field. This change matches the already
existing code for all other uses of the outbound proxy setting.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188247 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Copy the outbound proxy IP address into the SIP dialog structure as the IP address we will
be sending to. This has to be done because the logic that determines what local IP address to use
in the SIP messages is not aware of an outbound proxy being in place. It only knows what IP address
we are sending to.
(closes issue #12006)
Reported by: mnicholson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188067 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for the variables to be accessed if a member macro is run.
Thanks to Grigoriy Puzankin for bringing this up on the -dev list.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@188032 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r187962 | jpeeler | 2009-04-10 17:16:13 -0500 (Fri, 10 Apr 2009) | 9 lines
Fix module embedding for chan_h323.
Include libchanh323.a in the modules.link file so that all the symbols can be
resolved at link time.
(closes issue #11966)
Reported by: dome
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Include libchanh323.a in the modules.link file so that all the symbols can be
resolved at link time.
(closes issue #11966)
Reported by: dome
Patches:
issue_11966.patch uploaded by kpfleming (license 421)
Tested by: jpeeler
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r187865 | russell | 2009-04-10 14:26:40 -0500 (Fri, 10 Apr 2009) | 4 lines
Support "signaling" in addition to "signalling".
The sample configuration file has references to both spellings.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187866 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This allows for you to change the From header for outgoing MWI
NOTIFY requests. Prior to this, the best you could do was to
set a callerid in the general section of sip.conf. The problem
was that this was used for all outbound requests, not just
MWI NOTIFY requests.
AST-201
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187560 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The F option to app_dial has been modified to accept no parameters and perform
the above functionality. I don't see anywhere else that is doing function
overloading, but this really is the best place for this operation because:
- It makes it close to the 'g' option in the argument list which provides
similar functionality.
- The existing code to support the current F option provides a very
convienient location to add this new feature.
(closes issue #12381)
Reported by: michael-fig
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187491 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r187484 | mmichelson | 2009-04-09 13:51:20 -0500 (Thu, 09 Apr 2009) | 18 lines
Handle a SIP race condition (reinvite before an ACK) properly.
RFC 5047 explains the proper course of action to take if a
reINVITE is received before the ACK from a previous invite
transaction. What we are to do is to treat the reINVITE as
if it were both an ACK and a reINVITE and process it normally.
Later, when we receive the ACK we had been expecting, we will
ignore it since its CSeq is less than the current iseqno of
the sip_pvt representing this dialog.
(closes issue #13849)
Reported by: klaus3000
Patches:
13849_v2.patch uploaded by mmichelson (license 60)
Tested by: mmichelson, klaus3000
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
get_cid_name should not be called with a channel lock. get_cid_name calls ast_get_hint which eventually calls pbx_find_extension. pbx_find_extension starts and stops autoservice which should not be done with a channel lock, so get_cid_name should not be called with one.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The moh_register function links an mohclass and then immediately
unrefs the class since the container now has a reference. The problem
with using realtime music on hold is that the class is allocated,
registered, and started in one fell swoop. The refcounting logic
resulted in the count being off by one. The same problem did not
happen when using a static config because the allocation and registration
of an mohclass is a separate operation from starting moh. This also did
not affect non-cached realtime moh because the classes are not registered
at all.
I also have modified res_musiconhold to use the _t_ variants of the ao2_
functions so that more info can be gleaned when attempting to trace the
refcounts. I found this to be incredibly helpful for debugging this issue
and there's no good reason to remove it.
(closes issue #14661)
Reported by: sum
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187421 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was accomplished using a set of options and the setoption channel callback.
The core calls into the channel driver using these options and the channel driver
either returns success or failure.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@187360 65c4cc65-6c06-0410-ace0-fbb531ad65f3
