https://origsvn.digium.com/svn/asterisk/trunk
................
r207680 | kpfleming | 2009-07-21 08:28:04 -0500 (Tue, 21 Jul 2009) | 18 lines
Merged revisions 207647 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207647 | kpfleming | 2009-07-21 08:04:44 -0500 (Tue, 21 Jul 2009) | 12 lines
Ensure that user-provided CFLAGS and LDFLAGS are honored.
This commit changes the build system so that user-provided flags (in ASTCFLAGS
and ASTLDFLAGS) are supplied to the compiler/linker *after* all flags provided
by the build system itself, so that the user can effectively override the
build system's flags if desired. In addition, ASTCFLAGS and ASTLDFLAGS can now
be provided *either* in the environment before running 'make', or as variable
assignments on the 'make' command line. As a result, the use of COPTS and LDOPTS
is no longer necessary, so they are no longer documented, but are still supported
so as not to break existing build systems that supply them when building Asterisk.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds a new dahdi_wait function to specifically wait for the wink
event. If the wink is not eventually received the channel is hung up.
(closes issue #14434)
Reported by: araasch
Patches:
emwinkmod uploaded by araasch (license 693)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r207424 | mmichelson | 2009-07-20 14:48:12 -0500 (Mon, 20 Jul 2009) | 39 lines
Merged revisions 207423 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r207423 | mmichelson | 2009-07-20 14:39:59 -0500 (Mon, 20 Jul 2009) | 33 lines
Answer video SDP offers properly when videosupport is not enabled.
Copied from Review board:
In issue 12434, the reporter describes a situation in which audio and video
is offered on the call, but because videosupport is disabled in sip.conf,
Asterisk gives no response at all to the video offer. According to RFC 3264,
all media offers should have a corresponding answer. For offers we do not
intend to actually reply to with meaningful values, we should still reply
with the port for the media stream set to 0.
In this patch, we take note of what types of media have been offered and
save the information on the sip_pvt. The SDP in the response will take into
account whether media was offered. If we are not otherwise going to answer
a media offer, we will insert an appropriate m= line with the port set to 0.
It is important to note that this patch is pretty much a bandage being
applied to a broken bone. The patch *only* helps for situations where video
is offered but videosupport is disabled and when udptl_pt is disabled but
T.38 is offered. Asterisk is not guaranteed to respond to every media offer.
Notable cases are when multiple streams of the same type are offered.
The 2 media stream limit is still present with this patch, too.
In trunk and the 1.6.X branches, things will be a bit different since Asterisk
also supports text in SDPs as well.
(closes issue #12434)
Reported by: mnnojd
Review: https://reviewboard.asterisk.org/r/311
Review: https://reviewboard.asterisk.org/r/313
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
to make merging easier. These changes are already on trunk.
................
r145293 | rmudgett | 2008-09-30 18:55:24 -0500 (Tue, 30 Sep 2008) | 54 lines
channels/chan_misdn.c
channels/misdn/isdn_lib.c
* Miscellaneous other fixes from trunk to make merging easier later.
........
r145200 | rmudgett | 2008-09-30 16:00:54 -0500 (Tue, 30 Sep 2008) | 7 lines
* Miscellaneous formatting changes to make v1.4 and trunk
more merge compatible in the mISDN area.
channels/chan_misdn.c
* Eliminated redundant code in cb_events() EVENT_SETUP
........
r144257 | crichter | 2008-09-24 03:42:55 -0500 (Wed, 24 Sep 2008) | 9 lines
improved helptext of misdn_set_opt.
........
r142181 | rmudgett | 2008-09-09 12:30:52 -0500 (Tue, 09 Sep 2008) | 1 line
Cleaned up comment
........
r138738 | rmudgett | 2008-08-18 16:07:28 -0500 (Mon, 18 Aug 2008) | 30 lines
channels/chan_misdn.c
* Made bearer2str() use allowed_bearers_array[]
* Made use the causes.h defines instead of hardcoded numbers.
* Made use Asterisk presentation indicator values if either of the
mISDN presentation or screen options are negative.
* Updated the misdn_set_opt application option descriptions.
* Renamed the awkward Caller ID presentation misdn_set_opt
application option value not_screened to restricted.
Deprecated the not_screened option value.
channels/misdn/isdn_lib.c
* Made use the causes.h defines instead of hardcoded numbers.
* Fixed some spelling errors and typos.
* Added all defined facility code strings to fac2str().
channels/misdn/isdn_lib.h
* Added doxygen comments to struct misdn_bchannel.
channels/misdn/isdn_lib_intern.h
* Added doxygen comments to struct misdn_stack.
channels/misdn_config.c
configs/misdn.conf.sample
* Updated the mISDN presentation and screen parameter descriptions.
doc/misdn.txt (doc/tex/misdn.tex)
* Updated the misdn_set_opt application option descriptions.
* Fixed some spelling errors and typos.
................
r158010 | rmudgett | 2008-11-19 19:46:09 -0600 (Wed, 19 Nov 2008) | 9 lines
Merged revision 157977 from
https://origsvn.digium.com/svn/asterisk/team/group/issue8824
........
Fixes JIRA ABE-1726
The dial extension could be empty if you are using MISDN_KEYPAD
to control ISDN provider features.
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@207287 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r206939 | dvossel | 2009-07-17 11:13:22 -0500 (Fri, 17 Jul 2009) | 20 lines
Merged revisions 206938 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206938 | dvossel | 2009-07-17 11:05:06 -0500 (Fri, 17 Jul 2009) | 14 lines
SIP incorrect From: header information when callpres is prohib
Some ITSP make use of the "Anonymous" display name to detect a
requirement to withhold caller id across the PSTN. This does
not work if the display name is "Unknown".
(closes issue #14465)
Reported by: Nick_Lewis
Patches:
chan_sip.c-callerpres.patch uploaded by Nick (license 657)
chan_sip.c-callerpres_trunk.patch uploaded by dvossel (license 671)
Tested by: Nick_Lewis, dvossel
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206941 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r206768 | dvossel | 2009-07-15 17:04:13 -0500 (Wed, 15 Jul 2009) | 8 lines
Session timer were not activated if Supported header field in INVITE had both "timer" and other options.
(closes issue #15403)
Reported by: makoto
Patches:
sip-session-timer.patch uploaded by makoto (license
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206774 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r206707 | rmudgett | 2009-07-15 16:14:41 -0500 (Wed, 15 Jul 2009) | 33 lines
Merged revisions 206706 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r206706 | rmudgett | 2009-07-15 15:44:55 -0500 (Wed, 15 Jul 2009) | 26 lines
Merged revision 206700 from
https://origsvn.digium.com/svn/asterisk/be/branches/C.2-...
..........
Fixed chan_misdn crash because mISDNuser library is not thread safe.
With Asterisk the mISDNuser library is driven by two threads concurrently:
1. channels/misdn/isdn_lib.c::manager_event_handler()
2. channels/misdn/isdn_lib.c::misdn_lib_isdn_event_catcher()
Calls into the library are done concurrently and recursively from
isdn_lib.c.
Both threads can fiddle with the master/child layer3_proc_t lists. One
thread may traverse the list when the other interrupts it and then removes
the list element which the first thread was currently handling. This is
exactly what caused the crash. About 60 calls were needed to a Gigaset
CX475 before it occurred once.
This patch adds locking when calling into the mISDNuser library.
This also fixes some cb_log calls with wrong port parameter.
JIRA ABE-1913
Patches: misdn-locking.patch (Modified with mostly cosmetic changes)
..........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r206702 | dvossel | 2009-07-15 15:20:01 -0500 (Wed, 15 Jul 2009) | 10 lines
callerid(num) is wrong when username is missing
A domain only sip uri <sip:123.123.123.123> would return
123.123.123.123 as callid num. Now, if the username is
missing from a uri, the callerid num field is left empty.
(closes issue #15476)
Reported by: viraptor
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206704 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r206489 | rmudgett | 2009-07-14 12:01:48 -0500 (Tue, 14 Jul 2009) | 35 lines
Merged revisions 206487 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r206487 | rmudgett | 2009-07-14 11:44:47 -0500 (Tue, 14 Jul 2009) | 28 lines
Fixes several call transfer issues with chan_misdn.
* issue #14355 - Crash if attempt to transfer a call to an application.
Masquerade the other pair of the four asterisk channels involved in the
two calls. The held call already must be a bridged call (not an
applicaton) or it would have been rejected.
* issue #14692 - Held calls are not automatically cleared after transfer.
Allow the core to initate disconnect of held calls to the ISDN port. This
also fixes a similar case where the party on hold hangs up before being
transferred or taken off hold.
* JIRA ABE-1903 - Orphaned held calls left in music-on-hold.
Do not simply block passing the hangup event on held calls to asterisk
core.
* Fixed to allow held calls to be transferred to ringing calls.
Previously, held calls could only be transferred to connected calls.
* Eliminated unused call states to simplify hangup code.
* Eliminated most uses of "holded" because it is not a word.
(closes issue #14355)
(closes issue #14692)
Reported by: sodom
Patches:
misdn_xfer_v14_r205839.patch uploaded by rmudgett (license 664)
Tested by: rmudgett
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206558 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r206386 | russell | 2009-07-14 09:51:44 -0500 (Tue, 14 Jul 2009) | 20 lines
Merged revisions 206385 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r206385 | russell | 2009-07-14 09:48:00 -0500 (Tue, 14 Jul 2009) | 13 lines
Merged revisions 206384 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r206384 | russell | 2009-07-14 09:45:47 -0500 (Tue, 14 Jul 2009) | 6 lines
Ensure apathetic replies are sent out on the proper socket.
chan_iax2 supports multiple address bindings. The send_apathetic_reply()
function did not attempt to send its response on the same socket that the
incoming message came in on.
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@206388 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205985 | dvossel | 2009-07-10 16:42:10 -0500 (Fri, 10 Jul 2009) | 16 lines
SIP register not using peer's outbound proxy
If callbackextension is defined for a peer it successfully causes
a registration to occur, but the registration ignores the
outboundproxy settings for the peer. This patch allows the
peer to be passed to obproxy_get() in transmit_register().
(closes issue #14344)
Reported by: Nick_Lewis
Patches:
callbackextension_peer_trunk.diff uploaded by dvossel (license 671)
Tested by: dvossel
Review: https://reviewboard.asterisk.org/r/294/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205987 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205840 | dvossel | 2009-07-10 11:42:04 -0500 (Fri, 10 Jul 2009) | 37 lines
Merged revisions 205804 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205804 | dvossel | 2009-07-10 11:23:59 -0500 (Fri, 10 Jul 2009) | 31 lines
SIP registration auth loop caused by stale nonce
If an endpoint sends two registration requests in a very short
period of time with the same nonce, both receive 401 responses
from Asterisk, each with a different nonce (the second 401
containing the current nonce and the first one being stale).
If the endpoint responds to the first 401, it does not match
the current nonce so Asterisk sends a third 401 with a newly
generated nonce (which updates the current nonce)... Now if
the endpoint responds to the second 401, it does not match the
current nonce either and Asterisk sends a fourth 401 with a
newly generated nonce... This loop goes on and on.
There appears to be a simple fix for this. If the nonce from
the request does not match our nonce, but is a good response
to a previous nonce, instead of sending a 401 with a newly
generated nonce, use the current one instead. This breaks
the loop as the nonce is not updated until a response is
received. Additional logic has been added to make sure no
nonce can be responded to twice though.
(closes issue #15102)
Reported by: Jamuel
Patches:
patch-bug_0015102 uploaded by Jamuel (license 809)
nonce_sip.diff uploaded by dvossel (license 671)
Tested by: Jamuel
Review: https://reviewboard.asterisk.org/r/289/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205842 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r205776 | mmichelson | 2009-07-10 10:56:45 -0500 (Fri, 10 Jul 2009) | 16 lines
Merged revisions 205775 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205775 | mmichelson | 2009-07-10 10:51:36 -0500 (Fri, 10 Jul 2009) | 10 lines
Ensure that outbound NOTIFY requests are properly routed through stateful proxies.
With this change, we make note of Record-Route headers present in any SUBSCRIBE
request that we receive so that our outbound NOTIFY requests will have the proper
Route headers in them.
(closes issue #14725)
Reported by: ibc
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205778 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r205728 | rmudgett | 2009-07-09 18:37:53 -0500 (Thu, 09 Jul 2009) | 21 lines
No audio on calls from Asterisk to various ISDN devices until DTMF sent by caller.
Add missing clearing of the dialing flag when the ISDN call is CONNECTED.
(i.e. When libpri generates the event PRI_EVENT_ANSWER.)
(closes issue #15420)
Reported by: scottbmilne
Patches:
bug15420-1.4.25.1-diff2.txt uploaded by alecdavis (license 585)
Tested by: scottbmilne, alecdavis
(closes issue #15416)
Reported by: avinoash
(closes issue #15389)
Reported by: alecdavis
This patch should also fix the following issue:
(issue #15205)
Reported by: vinsik
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r205696 | kpfleming | 2009-07-09 16:20:23 -0500 (Thu, 09 Jul 2009) | 16 lines
Repair ability of SendFAX/ReceiveFAX to respond to T.38 switchover.
Recent changes in T.38 negotiation in Asterisk caused these applications to
not respond when the other endpoint initiated a switchover to T.38; this
resulted in the T.38 switchover failing, and the FAX attempt to be made
using an audio connection, instead of T.38 (which would usually cause the
FAX to fail completely).
This patch corrects this problem, and the applications will now correctly
respond to the T.38 switchover request. In addition, the response will include
the appopriate T.38 session parameters based on what the other end offered
and what our end is capable of.
(closes issue #14849)
Reported by: afosorio
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@205698 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204835 | rmudgett | 2009-07-02 17:01:28 -0500 (Thu, 02 Jul 2009) | 17 lines
Merged revisions 204834 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204834 | rmudgett | 2009-07-02 16:59:43 -0500 (Thu, 02 Jul 2009) | 10 lines
Removed confusing warning message "Got Busy in Connected State"
If an incoming mISDN call is answered with the Answer application and a
subsequent Dial gets a busy endpoint then it is valid for that already
connected channel to get the busy indication. Asterisk will play the busy
tones until the dialplan plays something else or hangs up the call.
(closes issue #11974)
Reported by: fvdb
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@204837 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204301 | mmichelson | 2009-06-29 17:50:35 -0500 (Mon, 29 Jun 2009) | 15 lines
Merged revisions 204300 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204300 | mmichelson | 2009-06-29 17:45:34 -0500 (Mon, 29 Jun 2009) | 9 lines
Add error message so that it is clear why a SIP peer was not processed when
a DNS lookup fails on a host or outboundproxy.
(closes issue #13432)
Reported by: p_lindheimer
Patches:
outboundproxy.patch uploaded by p (license 558)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@204303 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r204247 | mmichelson | 2009-06-29 16:48:54 -0500 (Mon, 29 Jun 2009) | 32 lines
Merged revisions 204243,204246 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r204243 | mmichelson | 2009-06-29 16:23:43 -0500 (Mon, 29 Jun 2009) | 22 lines
Fix a problem where chan_sip would ignore "old" but valid responses.
chan_sip has had a problem for quite a long time that would manifest when
Asterisk would send multiple SIP responses on the same dialog before receiving
a response. The problem occurred because chan_sip only kept track of the highest
outgoing sequence number used on the dialog. If Asterisk sent two requests out,
and a response arrived for the first request sent, then Asterisk would ignore
the response. The result was that Asterisk would continue retransmitting the
requests and ignoring the responses until the maximum number of retransmissions
had been reached.
The fix here is to rearrange the code a bit so that instead of simply comparing
the sequence number of the response to our latest outgoing sequence number, we
walk our list of outstanding packets and determine if there is a match. If there is,
we continue. If not, then we ignore the response.
In doing this, I found a few completely useless variables that I have now removed.
(closes issue #11231)
Reported by: flefoll
Review: https://reviewboard.asterisk.org/r/298
........
r204246 | mmichelson | 2009-06-29 16:37:05 -0500 (Mon, 29 Jun 2009) | 3 lines
Fix build oops.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@204249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203909 | rmudgett | 2009-06-26 20:07:52 -0500 (Fri, 26 Jun 2009) | 23 lines
Merged revisions 203908 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203908 | rmudgett | 2009-06-26 19:55:12 -0500 (Fri, 26 Jun 2009) | 16 lines
The ISDN CPE side should not exclusively pick B channels normally.
Before this patch, Asterisk unconditionally picked B channels exclusively
on the CPE side and normally allowed alternative B channels on the network
side. Now Asterisk does the opposite.
Reasons for the CPE side to normally not pick B channels exclusively:
* For CPE point-to-multipoint mode (i.e. phone side), the CPE side does
not have enough information to exclusively pick B channels. (There may be
other devices on the line.)
* Q.931 gives preference to the network side picking B channels.
* Some telcos require the CPE side to not pick B channels exclusively.
(closes issue #14383)
Reported by: mbrancaleoni
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@203918 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r203672 | jpeeler | 2009-06-26 14:03:25 -0500 (Fri, 26 Jun 2009) | 16 lines
Check if polarityonanswerdelay has elapsed before setting a channel as answered
after a polarity reversal.
Previously on a polarity switch event chan_dahdi would set the channel
immediately as answered. This would cause problems if a polarity reversal
occurred when the line was picked up as the dial would not have yet occurred.
Now if the polarity reversal occurs before delay has elapsed after coming off
hook or an answer, it is ignored. Also, some refactoring was done in
_handle_event.
(closes issue #13917)
Reported by: alecdavis
Patches:
chan_dahdi.bug13917.feb09.diff2.txt uploaded by alecdavis (license 585)
Tested by: alecdavis
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@203700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r203258 | qwell | 2009-06-25 14:22:46 -0500 (Thu, 25 Jun 2009) | 10 lines
Unmute when we get a dtmfup (we muted on dtmfdown) event.
This would occasionally cause one-way audio when using hardware DTMF detection.
(closes issue #14761)
Reported by: tzafrir
Patches:
v1-14761.patch uploaded by dimas (license 88)
Tested by: tzafrir, dimas
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@203274 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203116 | russell | 2009-06-25 11:04:10 -0500 (Thu, 25 Jun 2009) | 18 lines
Merged revisions 203115 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203115 | russell | 2009-06-25 11:02:16 -0500 (Thu, 25 Jun 2009) | 11 lines
Resolve a crash related to a T.38 reinvite race condition.
This change resolves a crash observed locally during some T.38 testing.
A call was set up using a call file, and when the T.38 reinvite came in,
the channel state was still AST_STATE_DOWN. The reason is explained by
a comment in the code that previously lived in the handling of
AST_STATE_RINGING. This change modifies the logic to handle the same
race condition for any channel state that is not UP.
(closes ABE-1895)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@203118 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r203037 | rmudgett | 2009-06-24 16:08:55 -0500 (Wed, 24 Jun 2009) | 15 lines
Merged revisions 203036 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r203036 | rmudgett | 2009-06-24 16:01:43 -0500 (Wed, 24 Jun 2009) | 8 lines
Improved chan_dahdi.conf pritimer error checking.
Valid format is: pritimer=timer_name,timer_value
* Fixed segfault if the ',' is missing.
* Completely check the range returned by pri_timer2idx() to prevent
possible access outside array bounds.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@203057 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202343 | mmichelson | 2009-06-22 09:58:24 -0500 (Mon, 22 Jun 2009) | 36 lines
Merged revisions 202341-202342 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202341 | mmichelson | 2009-06-22 09:42:55 -0500 (Mon, 22 Jun 2009) | 26 lines
Fix a situation in which Asterisk would not stop retransmitting 487s.
If a CANCEL were received by Asterisk, we would send a 487 in response
to the original INVITE and a 200 OK for the CANCEL. If there were a network
hiccup which caused the 200 OK and the 487 to be lost, then the UA communicating
with Asterisk may try to retransmit its CANCEL. Asterisk's response to this used
to be to try sending another 487 to the canceled INVITE and another 200 OK to the
CANCEL.
The problem here is that the originally-sent 487 was sent "reliably" meaning that
it will be retransmitted until it is received properly. So when we receive the second
CANCEL it is likely that the first batch of 487s we sent is still going strong and
reaches the UA. The result was that the second set of 487s would be retransmitted
constantly until the maximum number of retries had been reached.
The fix for this is that if we receive a second CANCEL for an INVITE, then we cancel
the retransmission of the first set of 487s and start a second set. This causes the
dialog to be terminated reasonably.
(closes issue #14584)
Reported by: klaus3000
Patches:
14584_v2.patch uploaded by mmichelson (license 60)
Tested by: klaus3000
........
r202342 | mmichelson | 2009-06-22 09:44:58 -0500 (Mon, 22 Jun 2009) | 3 lines
Remove an extra debug line left from previous commit.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@202345 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r202337 | mmichelson | 2009-06-22 09:35:09 -0500 (Mon, 22 Jun 2009) | 31 lines
Merged revisions 202336 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r202336 | mmichelson | 2009-06-22 09:34:05 -0500 (Mon, 22 Jun 2009) | 25 lines
Fix a possible infinite loop in SDP parsing during glare situation.
There was a while loop in get_ip_and_port_from_sdp which was controlled
by a call to get_sdp_iterate. The loop would exit either if what we were
searching for was found or if the return was NULL. The problem is that
get_sdp_iterate never returns NULL. This means that if what we were searching
for was not present, the loop would run infinitely. This modification of the
loop fixes the problem.
(closes issue #15213)
Reported by: schmidts
(closes issue #15349)
Reported by: samy
(closes issue #14464)
Reported by: pj
(closes issue #15345)
Reported by: aragon
Patches:
sip_inf_loop.patch uploaded by mmichelson (license 60)
Tested by: aragon
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@202339 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201570 | dvossel | 2009-06-18 10:16:05 -0500 (Thu, 18 Jun 2009) | 11 lines
parsing extension correctly from sip register lines
If a transport type was specified, but no extension, parsing of the extension would return whatever was after the transport rather than defaulting to 's'.
(closes issue #15111)
Reported by: ffs
Patches:
chan_sip.c_register-parser.patch uploaded by ffs (license 730)
Tested by: ffs, dvossel
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201601 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201462 | mmichelson | 2009-06-17 15:10:01 -0500 (Wed, 17 Jun 2009) | 12 lines
Fix problem with no audio due to ignoring the SDP.
A recent change to our SDP version comparison made audio not function
on some calls. This was because of a test wherein we were trying to
see if an unsigned value was less than 0. This is a dumb comparison
and arguably the compiler should have warned about it. Alas, though,
it slipped past. Now it's fixed by changing the variable to be a
signed type.
Found by several developers. Tested by mnicholson and dbrooks.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201464 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r201344 | dvossel | 2009-06-17 10:20:26 -0500 (Wed, 17 Jun 2009) | 16 lines
SIP registry ref count error
During a sip reload, the list of sip_registry objects are
supposed to be traversed, unlinked, and destroyed, but
destruction never takes place due to a ref counting error.
This causes a memory leak when registry items are removed
from sip.conf and reloaded. While the registries are removed
from the global list, they are not removed from the scheduler.
Because of this, SIP register attempts continue to be sent
out for the item even though it may no longer be in the .conf.
(closes issue #15295)
Reported by: amorsen
Review: https://reviewboard.asterisk.org/r/282/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.1@201365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
