ast_rtp_new free'd rtp upon failure, but rtp_engine.c would also call
the destroy callback. Remove call to ast_free from ast_rtp_new, leave
it to rtp_engine.c to initiate the full cleanup. Add error detection
for the ssrc_mapping vector initialization. In rtp_allocate_transport
set rtp->s = -1 in the failure path where we close that FD to ensure we
don't try closing it twice.
ASTERISK-27854 #close
Change-Id: Ie02aecbb46228ca804e24b19cec2bb6f7b94e451
'rtpchecksums' and 'rtcpinterval' are not being reset to their defaults
if they are not present in the updated configuration file.
Change-Id: I1162e40199314d46cf3225d5e1271c4c81176670
app_voicemail wasn't properly cleaning up the stasis cache or the
mwi topic pool when the module was unloaded or when a user was
deleted as a result of a reload. This resulted in leaks in both
areas.
* app_voicemail now calls ast_delete_mwi_state_full when it frees
a user structure and ast_delete_mwi_state_full in turn now calls
the new stasis_topic_pool_delete_topic function to clear the topic
from the pool.
Change-Id: Ide23144a4a810e7e0faad5a8e988d15947965df8
The HTTP request processing in res_http_websocket allocates additional
space on the stack for various headers received during an Upgrade request.
An attacker could send a specially crafted request that causes this code
to overflow the stack, resulting in a crash.
* No longer allocate memory from the stack in a loop to parse the header
values. NOTE: There is a slight API change when using the passed in
strings as is. We now require the passed in strings to no longer have
leading or trailing whitespace. This isn't a problem as the only callers
have already done this before passing the strings to the affected
function.
ASTERISK-28013 #close
Change-Id: Ia564825a8a95e085fd17e658cb777fe1afa8091a
There's been a long standing leak when using topic pools. The
topics in the pool get cleaned up when the last pool reference is
released but you can't remove a topic specifically. If you reloaded
app_voicemail for instance, and mailboxes went away, their topics
were left in the pool.
* Added stasis_topic_pool_delete_topic() so modules can clean up
topics from pools.
* Registered the topic pool containers so it can be examined from
the CLI when AO2_DEBUG is enabled. They'll be named
"<topic_pool_name>-pool".
Change-Id: Ib7957951ee5c9b9b4482af7b9b4349112d62bc25
Fixes random asterisk crash on start or reload with TLS phones.
ASTERISK-28034 #close
Reported-by: David Hajek
Change-Id: I2a859f97dc80c348e2fa56e918214ee29521c4ac
This adds a module which registers a CLI command that can set the
REMB bitrate value for REMB as it enters or exits Asterisk. This
allows you to ignore what Asterisk or a client produces and is
useful for demonstrations.
This does not generate REMB frames, however, but just modifies
them as they flow to or from a channel.
Change-Id: Ib089427c46a4a36d645cecfe02406adb38c17bec
Stasis message types are global ao2 objects and we make stasis messages
and cache entries hold references to them. Since there are currently
situations where cache objects are never deleted, the reference count on
the types can exceed 100000 and generate a FRACK assertion message. The
stasis message cache could conceivably also have that many messages
legitimately on large systems.
The only down side to not holding the message type ref in the stasis
message is it only makes a crash either at shutdown or when manually
unloading a busy module slightly more likely. However, this is more
exposing a pre-existing stasis shutdown ordering issue than a problem with
not holding a message type ref in stasis messages.
* Made stasis messages and cache entries no longer hold a ref to the
message type.
Change-Id: Ibaa28efa8d8ad3836f0c65957192424c7f561707
* Create the stasis message object without a lock as it is immutable.
* Create the stasis message type object without a lock as it is immutable.
* Creating the stasis message type could crash if the passed in type name
is NULL and REF_DEBUG is enabled. Added missing NULL check when passing
the ao2 object tag string.
Change-Id: I28763c58bb9f0b427c11971d0103bf94055e7b32
This change brings in PJSIP 2.8, removes all the patches
that were merged upstream, and makes a minor change to
support a breaking change that was done.
ASTERISK-28059
Change-Id: I5097772b11b0f95c3c1f52df6400158666f0a189
In the original commit introducing the feature the column in the alembic
script was called 'suppress_q850_reason_header'.
In the code however the option is called 'suppress_q850_reason_headers'
(trailing 's'). This leads to errors when ARI push configuration is used.
Change-Id: Ie84808adbca6fcc9136556e4f5d741adbef5d14f
app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
Given a scenario where a session refresh was done with a removed
stream we would always add a removed stream to the outgoing SDP
even if one did not already exist.
This change makes it so that a removed stream is only placed into
the SDP if one already exists.
ASTERISK-28047
Change-Id: Ibb97d21cdeb87a8acae0c720861b0ff255708442
Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name
store IPv6 addresses without enclosing brackets. This causes some log
output to be confusing because it is difficult to separate the IPv6
address from a port specification.
* Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and
pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6
output.
* When a pj_sockaddr is not available, explicitly wrap IPv6 addresses
in brackets.
* When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure
to also set pjsip_rx_data.pkt_info.src_addr.
Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8
Can't do anonymous http checkout from Security-testsuite.
Need to use same credentials as the gerrit review checkout.
Change-Id: I87af68c995cb8926f5e87f9af245600d76984f05
Since app_voicemail no longer uses the cache to maintain its state
there is no longer a need to cache these messages.
ASTERISK-27121
Change-Id: I321c708505f5ad8d00e1b0afc4c27dc2ac12ecb4
As they're not actively used, they only grow stale. The moduleinfo field itself
is kept in Asterisk 13/15 for ABI compatibility.
ASTERISK-28046 #close
Change-Id: I8df66a7007f807840414bb348511a8c14c05a9fc
The documentation already specified EVENT_FLAG_DIALPLAN for this
event, but the implementation was using EVENT_FLAG_CALL.
Using EVENT_FLAG_DIALPLAN allows AMI clients to opt out of receiving
this highly verbose event.
ASTERISK-28033
Change-Id: I45b3119f30e4dbc17b49831f2b1a4f2c1beadafe
The bundled version of pjproject has a patch for Solaris compatability
that changes the definition of various socket structures which we need
to account for when compiling against a non-bundled version.
ASTERISK-28049 #close
Change-Id: Ia1ea47c433fc2d915115193ee889a752373925f0
If Asterisk is built using a DESTDIR this will cause the bundled jansson
to be installed to an unexpected location and we will fail to find it.
Change-Id: Id033e2813261e0d45232383d44c6391122169548
On MOH activation, moh_files_readframe() is called while the current
stream attached to the channel is NULL and it calls ast_moh_files_next()
immediately. However, it won't call ast_moh_files_next() again if sample
reading fails. The failure may occur because res_musiconhold retains the
last sample reading position in the channel data and MOH during the
previous hold/retrieve just reached EOF. Obviously, a bit of bad luck is
required here.
* Restructured moh_files_readframe() to try a second time to start MOH if
there was no stream setup and the saved position was at EOF. Also added
comments describing what is going on for each step.
ASTERISK-28029
Change-Id: I1508cf2c094f8feca22d6f76deaa9fdfa9944860
Generators provide such functionality as tone generation or
silence generation. RTCP frames provide RTCP information and
should not stop generators from operating.
ASTERISK-28005
Change-Id: Ieadada07b068a7aa426e8763f1b73a18e1ac34a9
Currently, to convert from a pj_sockaddr to an ast_sockaddr, the address
needs to be rendered to a string and then parsed into the correct
structure. This also involves a call to getaddrinfo(3). The same is true
for the inverse operation.
Instead, because we know the internal structure of both ast_sockaddr and
pj_sockaddr, we can translate directly between the two without the
need for an intermediate string.
Change-Id: If0fc4bba9643f755604c6ffbb0d7cc46020bc761
The stasis cache provides a way to reconstruct the current state
of topic subscribers. Unfortunately, since every subscribe and
unsubscribe is cached, the cache continues to grow unabated while
asterisk is running. This patch removes subscribe messages from
the cache when the corresponding unsubscribe is received.
This patch also registers the cache containers with ao2 so that if
AO2_DEBUG is turned on, you can list the container and get its
stats from the CLI.
ASTERISK-27121
Change-Id: I3d18905e477f3721815da91f30da8d3fbb2d4f56
