https://origsvn.digium.com/svn/asterisk/trunk
................
r173500 | jpeeler | 2009-02-04 15:17:53 -0600 (Wed, 04 Feb 2009) | 23 lines
Merged revisions 173211 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r173211 | jpeeler | 2009-02-03 15:57:01 -0600 (Tue, 03 Feb 2009) | 17 lines
Parking attempts made to one end of a bridge no longer will hang up due to a
parking failure.
Parking attempts made using either one-touch, or doing either a blind or
assisted transfer to the parking extension now keep up the bridge instead of
hanging up the attempted parked party. Normal causes for the parking attempt
to fail includes the specific specified extension (via PARKINGEXTEN) not being
available or if all the parking spaces are currently in use. To avoid having
to reverse a masquerade park_space_reserve was made to provide foresight if
a parking attempt will succeed and if so reserve the parking space.
(closes issue #13494)
Reported by: mdu113
Reviewed by Russell: http://reviewboard.digium.com/r/133/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r173458 | tilghman | 2009-02-04 12:48:06 -0600 (Wed, 04 Feb 2009) | 9 lines
When using a socket as a FILE *, the stdio functions will sometimes try to do
an fseek() on the stream, which is an invalid operation for a socket. Turning
off buffering explicitly lets the stdio functions know they cannot do this,
thus avoiding a potential error.
(closes issue #14400)
Reported by: fnordian
Patches:
tcptls.patch uploaded by fnordian (license 110)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173460 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r173354 | mmichelson | 2009-02-04 09:30:12 -0600 (Wed, 04 Feb 2009) | 30 lines
Fix a problem where file playback would cause fds to remain open forever
The problem came from the fact that a frame read from a format interpreter
was not freed. Adding a call to ast_frfree fixed this. The explanation for
why this caused the problem is a bit complex, but here goes:
There was a problem in all versions of Asterisk where the embedded frame
of a filestream structure was referenced after the filestream was freed. This
was fixed by adding reference counting to the filestream structure. The refcount
would increase every time that a filestream's frame pointer was pointing to an
actual frame of data. When the frame was freed, the refcount would decrease. Once
the refcount reached 0, the filestream was freed, and as part of the operation,
the open files were closed as well.
Thus it becomes more clear why a missing ast_frfree would cause a reference leak
and cause the files to not be closed. You may ask then if there was a frame leak
before this patch. The answer to that is actually no! The filestream code was
"smart" enough to know that since the frame we received came from a format interpreter,
the frame had no malloced data and thus didn't need to be freed. Now, however, there
is cleanup that needs to be done when we finish with the frame, so we do need to
call ast_frfree on the frame to be sure that the refcount for the filestream is
decremented appropriately.
(closes issue #14384)
Reported by: fiddur
Patches:
14384.patch uploaded by putnopvut (license 60)
Tested by: fiddur, putnopvut
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173355 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r173311 | tilghman | 2009-02-03 18:43:52 -0600 (Tue, 03 Feb 2009) | 10 lines
Ensure that commas placed in the middle of extension character classes do not
interfere with correct parsing of the extension. Also, if an unterminated
character class DOES make its way into the pbx core (through some other
method), ensure that it does not crash Asterisk.
(closes issue #14362)
Reported by: Nick_Lewis
Patches:
20090129__bug14362.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173312 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes issue with IAX2 transfers not taking place. As it was, a call that was being transfered would never be handed off correctly to the call ends because of how call numbers were stored in a hash table. The hash table, "iax_peercallno_pvt", storing all the current call numbers did not take into account the complications associated with transferring a call, so a separate hash table was required. This second hash table "iax_transfercallno_pvt" handles calls being transfered, once the call transfer is complete the call is removed from the transfer hash table and added to the peer hash table resuming normal operations. Addition functions were created to handle storing, removing, and comparing items in the iax_transfercallno_pvt table.
(issue #13468)
Review: http://reviewboard.digium.com/r/140/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@173250 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r172890 | murf | 2009-02-02 10:37:15 -0700 (Mon, 02 Feb 2009) | 41 lines
This change allows the disconnect feature (as in "one-touch" in features.c)
to be used within the dial app, before a call is bridged.
Many thanks to sobomax for submitting this patch.
Quoting from bug 11582:
"So the goal of the patch was to use the user configured feature code during the
call setup phase. The original ast_feature_interpret() function is not well suited
for this purpose as it uses much call bridge specific data and doesn't separate a
detection of feature from a feature handler call. So a new function ast_feature_detect()
has been extracted off the ast_feature_interpret() function but keeping the original
logic intact except some insignificant changes to locking.
"Having created the ast_feature_detect() function the possibility to use feature detection
in almost any place of the asterisk code. So a call to this function has been added to
wait_for_answer() function of app_dial.so module. This code doesn't call the feature handler
however and uses old call leg disconnect logic to make the changes as small and simple as
possible to prevent unexpected problems. A disconnect feature currently is the only one
supported during call setup as other features as call parking and call transfer don't make much
sense during call setup. However if need in some of the features would arise it is much easier to
implement as the infrastructure changes are already in place with this patch."
I have cleaned up the patch somewhat, and verified that the existing functionality is not
harmed, and that the new functionality works. Terry has committed his stuff, and there were
no conflicts (see 14274).
(closes issue #11583)
Reported by: sobomax
Patches:
patch-apps__app_dial.c uploaded by sobomax (license 359)
patch-include__asterisk__features.h uploaded by sobomax (license 359)
patch-res__res_features.c uploaded by sobomax (license 359)
enable-features-during-call-setup.diff uploaded by sobomax (license 359)
11583.newdiff uploaded by murf (license 17)
enable-features-during-call-setup-1.diff uploaded by sobomax (license 359)
11583.latest-patch uploaded by murf (license 17)
Tested by: sobomax, murf
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r172706 | tilghman | 2009-01-31 10:40:59 -0600 (Sat, 31 Jan 2009) | 7 lines
Don't increment the loop, now that incrementing is taken care of by the
decoder function.
(closes issue #14363)
Reported by: andrew53
Patches:
func_strings_filter.patch uploaded by andrew53 (license 519)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172707 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r172580 | twilson | 2009-01-30 15:29:12 -0600 (Fri, 30 Jan 2009) | 44 lines
Merged revisions 172517 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172517 | twilson | 2009-01-30 11:47:41 -0600 (Fri, 30 Jan 2009) | 37 lines
Fix feature inheritance with builtin features
When using builtin features like parking and transfers, the AST_FEATURE_* flags
would not be set correctly for all instances when either performing a builtin
attended transfer, or parking a call and getting the timeout callback. Also,
there was no way on a per-call basis to specify what features someone should
have on picking up a parked call (since that doesn't involve the Dial() command).
There was a global option for setting whether or not all users who pickup a
parked call should have AST_FEATURE_REDIRECT set, but nothing for DISCONNECT,
AUTOMON, or PARKCALL.
This patch:
1) adds the BRIDGE_FEATURES dialplan variable which can be set either in the
dialplan or with setvar in channels that support it. This variable can be set
to any combination of 't', 'k', 'w', and 'h' (case insensitive matching of the
equivalent dial options), to set what features should be activated on this
channel. The patch moves the setting of the features datastores into the
bridging code instead of app_dial to help facilitate this.
2) adds global options parkedcallparking, parkedcallhangup, and
parkedcallrecording to be similar to the parkedcalltransfers option for
globally setting features.
3) has builtin_atxfer call builtin_parkcall if being transfered to the parking
extension since tracking everything through multiple masquerades, etc. is
difficult and error-prone
4) attempts to fix all cases of return calls from parking and completed builtin
transfers not having the correct permissions
(closes issue #14274)
Reported by: aragon
Patches:
fix_feature_inheritence.diff.txt uploaded by otherwiseguy (license 396)
Tested by: aragon, otherwiseguy
Review http://reviewboard.digium.com/r/138/
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172635 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r172441 | tilghman | 2009-01-29 17:15:40 -0600 (Thu, 29 Jan 2009) | 16 lines
Merged revisions 172438 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172438 | tilghman | 2009-01-29 16:54:29 -0600 (Thu, 29 Jan 2009) | 9 lines
Lose the CAP_NET_ADMIN at every fork, instead of at startup. Otherwise, if
Asterisk runs as a non-root user and the administrator does a 'restart now',
Asterisk loses the ability to set QOS on packets.
(closes issue #14004)
Reported by: nemo
Patches:
20090105__bug14004.diff.txt uploaded by Corydon76 (license 14)
Tested by: Corydon76
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172503 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r172400 | rmudgett | 2009-01-29 14:38:34 -0600 (Thu, 29 Jan 2009) | 12 lines
channels/chan_dahdi.c
* Added doxygen comments to the major dahdi structures.
* Fixed PRI and SS7 using an incorrect string value if the extension
delimiter is not present in the Dial() function.
* Fixed SS7 not checking if the dialed extension is at least as long
as the stripmsd option.
* Fixed PRI not handling unknown TON/NPI prefix letters correctly.
* Fixed some uninitialized string variables on FXS ports.
configs/chan_dahdi.conf.sample
* Updated some documentation.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172434 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r172173 | oej | 2009-01-29 10:18:01 +0100 (Tor, 29 Jan 2009) | 24 lines
Merged revisions 172169 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172169 | oej | 2009-01-29 09:48:18 +0100 (Tor, 29 Jan 2009) | 16 lines
Make sure that we always add the hangupcause headers. In some cases, the owner was disconnected before we checked for the cause.
This patch implements a temporary storage in the pvt and use that instead.
The code is based on ideas from code from Adomjan in issue #13385 (Add support for Reason: header)
Thanks to Klaus Darillion for testing!
(closes issue #14294)
related to issue #13385
Reported by: klaus3000 and adomjan
Patches:
bug14294b.diff uploaded by oej (license 306)
Based on 20080829_chan_sip.c-q850reason_header.patch uploaded by adomjan (license 487)
Tested by: oej, klaus3000
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172217 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r172063 | murf | 2009-01-28 13:31:06 -0700 (Wed, 28 Jan 2009) | 52 lines
Merged revisions 172030 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r172030 | murf | 2009-01-28 11:51:16 -0700 (Wed, 28 Jan 2009) | 46 lines
This patch fixes h-exten running misbehavior in manager-redirected
situations.
What it does:
1. A new Flag value is defined in include/asterisk/channel.h,
AST_FLAG_BRIDGE_HANGUP_DONT, which used as a messenge to the
bridge hangup exten code not to run the h-exten there (nor
publish the bridge cdr there). It will done at the pbx-loop
level instead.
2. In the manager Redirect code, I set this flag on the channel
if the channel has a non-null pbx pointer. I did the same for the
second (chan2) channel, which gets run if name2 is set...
and the first succeeds.
3. I restored the ending of the cdr for the pbx loop h-exten
running code. Don't know why it was removed in the first place.
4. The first attempt at the fix for this bug was to place code
directly in the async_goto routine, which was called from a
large number of places, and could affect a large number of
cases, so I tested that fix against a fair number of transfer
scenarios, both with and without the patch. In the process,
I saw that putting the fix in async_goto seemed not to affect
any of the blind or attended scenarios, but still, I was
was highly concerned that some other scenarios I had not tested
might be negatively impacted, so I refined the patch to
its current scope, and jmls tested both. In the process, tho,
I saw that blind xfers in one situation, when the one-touch
blind-xfer feature is used by the peer, we got strange
h-exten behavior. So, I inserted code to swap CDRs and
to set the HANGUP_DONT field, to get uniform behavior.
5. I added code to the bridge to obey the HANGUP_DONT flag,
skipping both publishing the bridge CDR, and running
the h-exten; they will be done at the pbx-loop (higher)
level instead.
6. I removed all the debug logs from the patch before committing.
7. I moved the AUTOLOOP set/reset in the h-exten code in res_features
so it's only done if the h-exten is going to be run. A very
minor performance improvement, but technically correct.
(closes issue #14241)
Reported by: jmls
Patches:
14241_redirect_no_bridgeCDR_or_h_exten_via_transfer uploaded by murf (license 17)
Tested by: murf, jmls
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@172065 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r171691 | mmichelson | 2009-01-27 15:58:39 -0600 (Tue, 27 Jan 2009) | 47 lines
Merged revisions 171689 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r171689 | mmichelson | 2009-01-27 15:55:08 -0600 (Tue, 27 Jan 2009) | 39 lines
Fix devicestate problems for "always-on" agent channels
A revision to chan_agent attempted to "inherit" the device
state of the underlying channel in order to report the
device state of an agent channel more accurately.
The problem with the logic here is that it makes no sense to
use this for always-on agents. If the agent is logged in, then
to the underlying channel, the agent will always appear to be
"in use," no matter if the agent is on a call or not. The reason
is that to the underlying channel, the channel is currently in use
on a call to the AgentLogin application.
The most common cause that I found for this issue to occur was for
a SIP channel to be the underlying channel type for an Agent channel.
If the SIP phone re-registers, then the registration will cause the
device state core to query the device state of the SIP channel. Since the
SIP channel is in use, the Agent channel would also inherit this status.
Once the agent channel was set to "in use" there was no way that the device
state could change on that channel unless the agent logged out.
The solution for this problem is a bit different in 1.4 than it is in the
other branches. In 1.4, there will be a one-line fix to make sure that only
callback agents will inherit device state from their underlying channel type.
For the other branches of Asterisk, since callback support has been removed, there
is also no need for device state inheritance in chan_agent, so I will simply be
removing it from the code.
In addition, the 1.4 source is getting a new comment to help the next person who
edits chan_agent.c. I'm adding a comment that a agent_pvt's loginchan field may be
used to determine if the agent is a callback agent or not.
(closes issue #14173)
Reported by: nathan
Patches:
14173.patch uploaded by putnopvut (license 60)
Tested by: nathan, aramirez
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r171622 | mmichelson | 2009-01-27 14:11:30 -0600 (Tue, 27 Jan 2009) | 26 lines
Merged revisions 171621 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r171621 | mmichelson | 2009-01-27 14:06:01 -0600 (Tue, 27 Jan 2009) | 18 lines
Prevent a crash from occurring when a jitter buffer interpolated frame is
removed from a slinfactory
slinfactory used the "samples" field of an ast_frame in order to determine
the amount of data contained within the frame. In certain cases, such as
jitter buffer interpolated frames, the frame would have a non-zero value for
"samples" but have NULL "data"
This caused a problem when a memcpy call in ast_slinfactory_read would attempt
to access invalid memory. The solution in use here is to never feed frames into
the slinfactory if they have NULL "data"
(closes issue #13116)
Reported by: aragon
Patches:
13116.diff uploaded by putnopvut (license 60)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r171618 | mmichelson | 2009-01-27 13:30:54 -0600 (Tue, 27 Jan 2009) | 24 lines
Fix queue crashes that would occur after the calling channel was masqueraded.
The data passed to the end_bridge_callback was assumed to be data which was
still stack'd. The problem was that with some call features, attended transfers
in particular, a new bridge thread is started once the feature completes, meaning
that when the end_bridge_callback is called, the end_bridge_callback_data was
invalid.
To fix this problem, there are two measures taken
1. Instead of pointing to stacked data, we now used heap-allocated data for
passing to the end_bridge_callback in app_queue
2. Since bridges can end multiple times on a single logical call, we wait until
the final bridge is broken to actually set any queue variables. This is accomplished
through reference-counting and the use of an end_bridge_callback_data_fixup function
in app_queue.c
(closes issue #14260)
Reported by: ccesario
Patches:
14260.patch uploaded by putnopvut (license 60)
Tested by: ccesario
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171619 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r171528 | oej | 2009-01-27 16:00:19 +0100 (Tis, 27 Jan 2009) | 23 lines
Solving the same issue, but a bit different in trunk...
Merged revisions 171527 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r171527 | oej | 2009-01-27 15:33:20 +0100 (Tis, 27 Jan 2009) | 13 lines
Use the same branch tag in CANCEL as in INVITE
Originally putnopvut implemented some changes in revision 142079 that according to the bug report seemed to have worked then, but somehow fails now.
I guess code, as humans, get old and forget stuff. Anyway, this bug caused CANCEL not to work with picky systems.
Thanks Fredrik for pointing out where the bug in the SIP messaging was.
(closes issue #14346)
Reported by: oej
Patches:
bug14346.diff uploaded by oej (license 306)
Tested by: oej
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r171081 | mvanbaak | 2009-01-25 17:50:53 +0100 (Sun, 25 Jan 2009) | 2 lines
dont segfault when a MWI event occurs on a line without a registered device
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@171082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
........
r170943 | russell | 2009-01-24 20:49:30 -0600 (Sat, 24 Jan 2009) | 6 lines
Change ARRAY_LEN() to be more C++ safe.
When the second part of this macro is written as 0[a] instead of a[0], it will
force a failure if the macro is used on a C++ object that overloads the []
operator.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@170944 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r170902 | russell | 2009-01-24 13:33:15 -0600 (Sat, 24 Jan 2009) | 2 lines
Add a todo to finish the XML docs in this module
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@170903 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r170677 | mmichelson | 2009-01-23 14:23:00 -0600 (Fri, 23 Jan 2009) | 22 lines
Merged revisions 170671 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r170671 | mmichelson | 2009-01-23 14:21:51 -0600 (Fri, 23 Jan 2009) | 14 lines
Update contrib/i18n.testsuite.conf to not use deprecated syntax
* Convert Wait,1 to Wait(1)
* Convert SetLanguage to Set(CHANNEL(language))
* Use 'n' for all priorities beyond the first
Also added test for Chinese numbers, too.
(closes issue #14320)
Reported by: dant
Patches:
i18n.testsuite.conf.issue14320.v2.diff uploaded by dant (license 670)
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@170685 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/trunk
................
r170652 | file | 2009-01-23 16:18:05 -0400 (Fri, 23 Jan 2009) | 11 lines
Merged revisions 170648 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r170648 | file | 2009-01-23 16:16:39 -0400 (Fri, 23 Jan 2009) | 4 lines
When a channel is answered make sure any indications currently playing stop. Usually the phone would do this but if the channel was already answered then they are being generated by Asterisk and we darn well need to stop them.
(closes issue #14249)
Reported by: RadicAlish
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/1.6.0@170659 65c4cc65-6c06-0410-ace0-fbb531ad65f3
