Prior to this patch, if pause or unpause was issued on an interface
without specifying a specific queue, a PAUSEALL or UNPAUSEALL event
would be logged in the queue log even if that interface wasn't a
member of any queues. This patch changes it so that these events are
only logged when at least one member of any queue exists for that
interface.
(closes issue AST-946)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2079/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When app_queue is unloaded, the queues container has its refcount
decremented, potentially to 0. Then the taskprocessor responsible
for handling device state changes is unreferenced. If the
taskprocessor happens to be just about to run its task, then it
will create and destroy an iterator on the queues container.
This can cause the refcount on the queues container to increase to
1 and then back to 0. Going back to 0 a second time results in
double frees.
This failure was seen periodically in the testsuite when Asterisk
would shut down.
........
Merged revisions 372089 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372090 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372091 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372092 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Queue member status would not always get updated properly when the member
was called, thus resulting in the member getting multiple calls. With this
change, we update the member's status at the time of calling, and we also
check to make sure the member is still available to take the call before
placing an outbound call.
(closes issue ASTERISK-16115)
reported by nik600
Patches:
app_queue.c-svn-r370418.patch uploaded by Italo Rossi (license #6409)
........
Merged revisions 372048 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372049 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372050 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372051 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes numerous doxygen warnings across Asterisk. It also updates
the makefile to regenerate the doxygen configuration on the local system
before running doxygen to help prevent warnings/errors on the local system.
Much thanks to Andrew for tackling one of the Asterisk janitor projects!
(issue ASTERISK-20259)
Reported by: Andrew Latham
Patches:
doxygen_partial.diff uploaded by Andrew Latham (license 5985)
make_progdocs.diff uploaded by Andrew Latham (license 5985)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371989 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a static queue had realtime members, then there could be a potential
for those realtime members not to be properly deleted from memory.
If the queue's members were loaded from realtime and then all the
members were deleted from the backend, then the queue would still
think these members existed. The reason was that there was a short-
circuit in code such that if there were no members found in the
backend, then the queue would not be updated to reflect this.
Note that this only affected static queues with realtime members.
Realtime queues with realtime members were unaffected by this issue.
(closes issue ASTERISK-19793)
reported by Marcus Haas
........
Merged revisions 371306 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 371313 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 371324 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@371325 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a channel hangs up while being spied upon and the option to exit the
ChanSpy application when the spied on channel hangs up is set,
ast_autochan_destroy is not being called and therefore a reference to the spied
upon channel is not removed.
The symptom being reported was that when using func_group in the dialplan and
calling "group show channels" at the cli, the spied upon channel was still
being shown while "core show channels" showed that the channel was not up.
This patch calls ast_autochan_destroy when a spied upon channel hangs up and
the option to exit the ChanSpy application is set, removing the reference to
the channel allowing the count for the group that the spied channel was part of
to be decremented.
(closes issue ASTERISK-17515)
Reported by: Arkadiusz Malka
Tested by: Alexandr Gordeev, Michael L. Young
Patches:
asterisk-17515-destroy-autochan.diff
uploaded by Michael L. Young (license 5026)
........
Merged revisions 370952 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 370954 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370955 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is based on the work done by Olle Johansson on review board.
The idea is that the channel specified in an AMI originate or call
file is typically not connected to the outgoing extension until the
channel has been answered. With this change, an EarlyMedia header can
be specified for AMI originates and an early_media option can
be specified in call files. With this option set, once early media is
received on a channel, it will be connected with the outgoing extension.
(closes issue ASTERISK-18644)
Reported by Olle Johansson
Review: https://reviewboard.asterisk.org/r/1472
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The value "none" is specified in the config file as a valid value for
the "video_mode" option. The code prior to the ACO conversion did not
check for "none", but just ignored it and relied on the default zero
value. The parsing with ACO is more strict, so without handling
"none" specifically, parsing would fail.
When parsing failed, but the module loaded anyway, the config info
would never be stored, and one place in the code did not check for
this case and would segfault. It was also possible that the
aco_info struct's internals would be destroyed and used as well.
This patch keeps the module from loading after parse failures, adds
the "none" option to "video_mode", registers CLI functions only
after parsing has completed, checks the config data for NULL before
accessing it, and returns -1 on some allocation failures when
initializing.
(closes issue ASTERISK-20159)
Reported by: Birger "WIMPy" Harzenetter
Tested by: Birger "WIMPy" Harzenetter
Patches:
confbridge_fix3.txt uploaded by Terry Wilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The paragraph describing the SubEvent belongs with the SubEvent parameter
itself, and not with its enum values. The order of parsing was placing
the description after the last enum, which isn't correct.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The heard and deleted arrays in the voicemail state structure were not
handled properly following the memory leak fix in r354890 and a fix for
an invalid free in r356797. This could result in accessing and writing
into freed memory. The allocation for these arrays has been reworked
to avoid the possibility of invalid frees, access of freed memory, and
crashes that were occurring as a result of this.
Locking around accesses and modifications of the voicemail state
structure members dh_arraysize, heard, and deleted has been added to
prevent simultaneous modification and access when IMAP storage is in
use. If IMAP storage is not in use, this locking is not compiled in.
Review: https://reviewboard.asterisk.org/r/1994/
(closes issue ASTERISK-19923)
Reported by: Dan Delaney
Tested by: Dan Delaney, Julian Yap
Patches:
vm_alloc_fix.diff uploaded by kmoore (license 6273)
........
Merged revisions 369652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369653 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Manager_mixmonitor included an early return on failed executions of mixmonitor
that would result in a leaked channel reference.
(closes issue ASTERISK-19943)
Reported by: Mark Murawski
Patches:
mixmonitor-trunk-368394.patch uploaded by Mark Murawski (license 5791)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make non-normal dialplan execution routines be able to run on a hung up
channel. This is preparation work for hangup handler routines.
* Fixed ability to support relative non-normal dialplan execution
routines. (i.e., The context and exten are optional for the specified
dialplan location.) Predial routines are the only non-normal routines that
it makes sense to optionally omit the context and exten. Setting a hangup
handler also needs this ability.
* Fix Return application being able to restore a dialplan location
exactly. Channels without a PBX may not have context or exten set.
* Fixes non-normal execution routines like connected line interception and
predial leaving the dialplan execution stack unbalanced. Errors like
missing Return statements, popping too many stack frames using StackPop,
or an application returning non-zero could leave the dialplan stack
unbalanced.
* Fixed the AGI gosub application so it cleans up the dialplan execution
stack and handles the autoloop priority increments correctly.
* Eliminated the need for the gosub_virtual_context return location.
Review: https://reviewboard.asterisk.org/r/1984/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix only issue pointed out by deprecated_REVERSE_INULL.txt for
app_meetme.c in find_user().
* Change use of %i to %d in sscanf() in find_user(). The use of %i gives
unexpected parsing because it can accept hex, octal, and decimal integer
formats.
* Changed other uses of %i in app_meetme() to use %d for consistency.
(issue ASTERISK-19648)
Reported by: Matt Jordan
........
Merged revisions 367906 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367907 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial and Queue I option is intended to block connected line updates
and redirecting updates. However, it is a feature that when a call is
locally redirected, the I option is disabled if the redirected call runs
as a local channel so the administrator can have an opportunity to setup
new connected line information. Unfortunately, the Dial and Queue I
option is disabled for *all* forked calls if one of those calls is
redirected.
* Make the Dial and Queue I option apply to each outgoing call leg
independently. Now if one outgoing call leg is locally redirected, the
other outgoing calls are not affected.
* Made Dial not pass any redirecting updates when forking calls.
Redirecting updates do not make sense for this scenario.
* Made Queue not pass any redirecting updates when using the ringall
strategy. Redirecting updates do not make sense for this scenario.
* Fixed deadlock potential with chan_local when Dial and Queue send
redirecting updates for a local redirect.
* Converted the Queue stillgoing flag to a boolean bitfield.
(closes issue ASTERISK-19511)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1920/
........
Merged revisions 367678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367679 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A patch introduced in r354938 made it so that ConfBridge would not attempt to
play sound files if those files did not exist. Unfortunately, ConfBridge uses
the same underlying function, play_sound_helper, to playback both sound files
and numbers to callers. When a number is being played back, the name of the
sound file is expected to be NULL. This NULL value was passed into a function
that tested for the existance of a sound file and is not tolerant to NULL
file names, causing a crash.
This patch fixes the behavior, such that if a sound file does not exist we
do not attempt to play it, but we only attempt that check if the a sound file
was specified in the first place. If a sound file was not specified, we use
the 'play number' logic in the helper function.
(closes issue ASTERISK-19899)
Reported by: Florian Gilcher
Tested by: Florian Gilcher
patches:
asterisk-19899.diff uploaded by mjordan (license 6283)
........
Merged revisions 367562 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
