When Asterisk starts a module (calling its load_module function), it re-orders
the module list, sorting it alphabetically. Ostensibly, this was done so that
the output of 'module show' listed modules in alphabetic order. This had the
unfortunate side effect of making modules with complex usage patterns
unloadable. A module that has a large number of modules that depend on it is
typically abandoned during the unloading process. This results in its memory
not being reclaimed during exit.
Generally, this isn't harmful - when the process is destroyed, the operating
system will reclaim all memory allocated by the process. Prior to Asterisk 12,
we also didn't have many modules with complex dependencies. However, with
the advent of ARI and PJSIP, this can make make unloading those modules
successfully nearly impossible, and thus tracking memory leaks or ref debug
leaks a real pain.
While this patch is not a complete overhaul of the module loader - such an
effort would be beyond the scope of what could be done for Asterisk 13 -
this does make some marginal improvements to the loader such that modules
like res_pjsip or res_stasis *may* be made properly un-loadable in the future.
1. The linked list of modules has been replaced with a doubly linked list. This
allows traversal of the module list to occur backwards. The module shutdown
routine now walks the global list backwards when it attempts to unload
modules.
2. The alphabetic reorganization of the module list on startup has been
removed. Instead, a started module is placed at the end of the module list.
3. The ast_update_module_list function - which is used by the CLI to display
the modules - now does the sorting alphabetically itself. It creates its own
linked list and inserts the modules into it in alphabetic order. This allows
for the intent of the previous code to be maintained.
This patch also contains a fix for res_calendar. Without calendar.conf, the
calendar modules were improperly bumping the use count of res_calendar, then
failing to load themselves. This patch makes it so that we detect whether or
not calendaring is enabled before altering the use count.
Review: https://reviewboard.asterisk.org/r/3777/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "bridge destroy" CLI command is invasive to bridges and can leave them in an unexpected
state for the users of them. Since this command may be useful for developers it is now
only available when developer mode is available. To take its place "all" has been added
as a valid option to the "bridge kick" CLI command. It will kick all of the channels
in the bridge out.
ASTERISK-23987
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3840/
........
Merged revisions 419536 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419537 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous behavior was to simply set the accountcode of an outgoing
channel to the accountcode of the channel initiating the call. It was
done this way a long time ago to allow the accountcode set on the SIP/100
channel to be propagated to a local channel so the dialplan execution on
the Local;2 channel would have the SIP/100 accountcode available.
SIP/100 -> Local;1/Local;2 -> SIP/200
Propagating the SIP/100 accountcode to the local channels is very useful.
Without any dialplan manipulation, all channels in this call would have
the same accountcode.
Using dialplan, you can set a different accountcode on the SIP/200 channel
either by setting the accountcode on the Local;2 channel or by the Dial
application's b(pre-dial), M(macro) or U(gosub) options, or by the
FollowMe application's b(pre-dial) option, or by the Queue application's
macro or gosub options. Before Asterisk v12, the altered accountcode on
SIP/200 will remain until the local channels optimize out and the
accountcode would change to the SIP/100 accountcode.
Asterisk v1.8 attempted to add peeraccount support but ultimately had to
punt on the support. The peeraccount support was rendered useless because
of how the CDR code needed to unconditionally force the caller's
accountcode onto the peer channel's accountcode. The CEL events were thus
intentionally made to always use the channel's accountcode as the
peeraccount value.
With the arrival of Asterisk v12, the situation has improved somewhat so
peeraccount support can be made to work. Using the indicated example, the
the accountcode values become as follows when the peeraccount is set on
SIP/100 before calling SIP/200:
SIP/100 ---> Local;1 ---- Local;2 ---> SIP/200
acct: 100 \/ acct: 200 \/ acct: 100 \/ acct: 200
peer: 200 /\ peer: 100 /\ peer: 200 /\ peer: 100
If a channel already has an accountcode it can only change by the
following explicit user actions:
1) A channel originate method that can specify an accountcode to use.
2) The calling channel propagating its non-empty peeraccount or its
non-empty accountcode if the peeraccount was empty to the outgoing
channel's accountcode before initiating the dial. e.g., Dial and
FollowMe. The exception to this propagation method is Queue. Queue will
only propagate peeraccounts this way only if the outgoing channel does not
have an accountcode.
3) Dialplan using CHANNEL(accountcode).
4) Dialplan using CHANNEL(peeraccount) on the other end of a local
channel pair.
If a channel does not have an accountcode it can get one from the
following places:
1) The channel driver's configuration at channel creation.
2) Explicit user action as already indicated.
3) Entering a basic or stasis-mixing bridge from a peer channel's
peeraccount value.
You can specify the accountcode for an outgoing channel by setting the
CHANNEL(peeraccount) before using the Dial, FollowMe, and Queue
applications. Queue adds the wrinkle that it will not overwrite an
existing accountcode on the outgoing channel with the calling channels
values.
Accountcode and peeraccount values propagate to an outgoing channel before
dialing. Accountcodes also propagate when channels enter or leave a basic
or stasis-mixing bridge. The peeraccount value only makes sense for
mixing bridges with two channels; it is meaningless otherwise.
* Made peeraccount functional by changing accountcode propagation as
described above.
* Fixed CEL extracting the wrong ie value for the peeraccount. This was
done intentionally in Asterisk v1.8 when that version had to punt on
peeraccount.
* Fixed a few places dealing with accountcodes that were reading from
channels without the lock held.
AFS-65 #close
Review: https://reviewboard.asterisk.org/r/3601/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In Asterisk, it is possible for a device to have a status of ONHOLD. This is
not typically an easy thing to determine, as a channel being on hold is not
a direct channel state. Typically, this has to be calculated outside of the
core independently in channel drivers, notably, chan_sip and chan_pjsip. Both
of these channel drivers already have to calculate device state in a fashion
more complex than the core can handle, as they aggregate all state of all
channels associated with a peer/endpoint; they also independently track
whether or not one of those channels is currently on hold and mark the device
state appropriately.
In 12+, we now have the ability to report an AST_DEVICE_ONHOLD state for all
channels that defer their device state to the core. This is due to channel hold
state actually now being tracked on the channel itself. If a channel driver
defers its device state to the core (which many, such as DAHDI, IAX2, and
others do in most situations), the device state core already goes out to get a
channel associated with the device. As such, it can now also factor the channel
hold state in its calculation.
This patch adds this logic to the device state core. It also uses an existing
mapping between device state and channel state to handle more channel states.
chan_pjsip has been updated slightly as well to make use of this (as it was,
for some reason, reporting a channel state of BUSY as a device state of INUSE,
which feels slightly wrong).
Review: https://reviewboard.asterisk.org/r/3771/
ASTERISK-24038 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419358 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does two things:
(1) It updates the unit tests to expect additional stasis messages. More
messages are now sent to the endpoint topic, due to forwarding all
channel messages and the forwarding relationship set up between
endpoints themselves.
(2) Remove the technology forwarding subscription during
ast_endpoint_shutdown. This prevents an improper double shutdown of
an endpoint from occurring.
........
Merged revisions 419318 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Say you wanted to include variables in an application map and have those
variables substituted and passed along to the application being executed;
currently this does not happen.
This patch adds this ability to pass channel variable values to an
application before being executed.
ASTERISK-22608 #close
Reported by: Michael L. Young
patches:
features_substitute_arguments_v2.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3819/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419252 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When updating a row, we are currently doing an INSERT OR REPLACE INTO. The
downside to this is that the row is deleted if it exists and then a new row is
inserted. So, we are hitting the disk twice. One for the deletion and one for
the insertion.
This patch changes this statement to an INSERT INTO and if the insert fails
because a row with that key exists, we will IGNORE the failure. Then we will
attempt to perform an UPDATE on the existing row if that row wasn't just
INSERTed.
ASTERISK-24050 #close
Reported by: Michael L. Young
patches:
astdb-insert-update-io-help_trunk_v2.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/3815/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419222 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch serves two purposes:
(1) It fixes some bugs with endpoint subscriptions not reporting all of the
channel events
(2) It serves as the preliminary work needed for ASTERISK-23692, which allows
for sending/receiving arbitrary out of call text messages through ARI in a
technology agnostic fashion.
The messaging functionality described on ASTERISK-23692 requires two things:
(1) The ability to send/receive messages associated with an endpoint. This is
relatively straight forwards with the endpoint core in Asterisk now.
(2) The ability to send/receive messages associated with a technology and an
arbitrary technology defined URI. This is less straight forward, as
endpoints are formed from a tech + resource pair. We don't have a
mechanism to note that a technology that *may* have endpoints exists.
This patch provides such a mechanism, and fixes a few bugs along the way.
The first major bug this patch fixes is the forwarding of channel messages
to their respective endpoints. Prior to this patch, there were two problems:
(1) Channel caching messages weren't forwarded. Thus, the endpoints missed
most of the interesting bits (such as channel creation, destruction, state
changes, etc.)
(2) Channels weren't associated with their endpoint until after creation.
This resulted in endpoints missing the channel creation message, which
limited the usefulness of the subscription in the first place (a major use
case being 'tell me when this endpoint has a channel'). Unfortunately,
this meant another parameter to ast_channel_alloc. Since not all channel
technologies support an ast_endpoint, this patch makes such a call
optional and opts for a new function, ast_channel_alloc_with_endpoint.
When endpoints are created, they will implicitly create a technology endpoint
for their technology (if one does not already exist). A technology endpoint is
special in that it has no state, cannot have channels created for it, cannot
be created explicitly, and cannot be destroyed except on shutdown. It does,
however, have all messages from other endpoints in its technology forwarded to
it.
Combined with the bug fixes, we now have Stasis messages being properly
forwarded. Consider the following scenario: two PJSIP endpoints (foo and bar),
where bar has a single channel associated with it and foo has two channels
associated with it. The messages would be forwarded as follows:
channel PJSIP/foo-1 --
\
--> endpoint PJSIP/foo --
/ \
channel PJSIP/foo-2 -- \
---- > endpoint PJSIP
/
channel PJSIP/bar-1 -----> endpoint PJSIP/bar --
ARI, through the applications resource, can:
- subscribe to endpoint:PJSIP/foo and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2 and endpoint PJSIP/foo
- subscribe to endpoint:PJSIP/bar and get notifications for channels
PJSIP/bar-1 and endpoint PJSIP/bar
- subscribe to endpoint:PJSIP and get notifications for channels
PJSIP/foo-1,PJSIP/foo-2,PJSIP/bar-1 and endpoints PJSIP/foo,PJSIP/bar
Note that since endpoint PJSIP never changes, it never has events itself. It
merely provides an aggregation point for all other endpoints in its technology
(which in turn aggregate all channel messages associated with that endpoint).
This patch also adds endpoints to res_xmpp and chan_motif, because the actual
messaging work will need it (messaging without XMPP is just sad).
Review: https://reviewboard.asterisk.org/r/3760/
ASTERISK-23692
........
Merged revisions 419196 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419203 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This prevents a crash in the Dial API triggered by use of the Page()
application where a format capability struct was used before checking
whether it was NULL.
ASTERISK-24074 #close
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@419111 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If a reference count goes negative, instead of
just logging that fact, be more helpful with a
backtrace and an assert that will DO_CRASH.
This patch also removes the duplicate ao2_bt()
function and cleans up extraneous usage of the
ast_log_backtrace() call.
Review: https://reviewboard.asterisk.org/r/3765/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418963 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Whenever possible, audiohooks and framehooks will now be copied over
to the channel that the masquerading channel gets cloned into. This
should occur for all audiohooks and most framehooks. As a result,
in Asterisk 12.5 and up, the AUDIOHOOK_INHERIT function is now
deprecated and its behavior is essentially the new default for all
audiohooks, plus some additional audiohooks/framehooks.
Review: https://reviewboard.asterisk.org/r/3721/
........
Merged revisions 418914 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418936 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When the PresenceState action is executed, the nominal path fails to include
the ActionID in the successful response. This patch adds a call to
astman_start_ack, which guarantees that an ActionID (if provided) will be
sent back to the AMI client.
Unlike the Asterisk 11 and 12 patches, this patch also deprecates the
duplicate Message key in the response to the action, replacing it with the
key 'PresenceMessage'.
Review: https://reviewboard.asterisk.org/r/3776/
ASTERISK-23985 #close
........
Merged revisions 418713 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 418714 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Create a Stasis bridge sub-class to propagate linkedids and
accountcodes.
* Fixed the basic bridge sub-class to update peeraccount codes when the
number of channels in the bridge drops back down to two parties.
* Refactored ast_bridge_channel_update_accountcodes() to handle channels
joining/leaving the bridge.
* Fixed the basic bridge sub-class to not call the base bridge class pull
method twice.
AFS-105 #close
ASTERISK-23852 #close
Reported by: Richard Mudgett
Review: https://reviewboard.asterisk.org/r/3720/
........
Merged revisions 418225 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418226 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects two issues with the extra field information in Asterisk
12+ in channel event logs.
It is possible to inject custom values into the dialstatus provided by
ast_channel_dial_type() Stasis messages that fall outside the
enumeration allowed for the DIALSTATUS channel variable. CEL now
filters for the allowed values and ignores other values.
The "hangupsource" extra field key is always blank if the far end
channel is a chan_pjsip channel. This is because the hangupsource is
never set for the pjsip channel driver. This change sets the
hangupsource whenever a hangup is queued for chan_pjsip channels.
This corrects an issue with the pjsip channel driver where the
hangupcause information was not being set properly.
Review: https://reviewboard.asterisk.org/r/3690/
........
Merged revisions 418071 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous patch (r418034) fixed the 'glitch' that the channels/h323
Makefile no longer existed. Unfortunately, removing the entire line was a bit
of a blunder, as it meant that build_tools/menuselect-deps was never
generated. Hilarity ensued when actually trying to compile.
But hey! At least configure worked.
This patch fixes *that* glitch, and removes some more of the vestiges of h323.
(It had tendrils in the main Makefile? Crazy.)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418035 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Billing records are fair,
To get paid is quite bright,
You should really use ODBC;
Good-bye cdr_sqlite.
Microsoft did once push H.323,
Hell, we all remember NetMeeting.
But try to compile chan_h323 now
And you will take quite a beating.
The XMPP and SIP war was fierce,
And in the distant fray
Was birthed res_jabber/chan_jingle;
But neither to stay.
For everyone did care and chase what Google professed.
"Free Internet Calling" was what devotees cried,
But Google did change the specs so often
That the developers were happy the day chan_gtalk died.
And then there was that odd application
Dedicated to the Polish tongue.
app_saycountpl was subsumed by Say;
One could say its bell was rung.
To read and parse a file from the dialplan
You could (I guess) use an application.
app_readfile did fill that purpose, but I think
A function is perhaps better in its creation.
Barging is rude, I'm not sure why we do it.
Inwardly, the caller will probably sigh.
But if you really must do it,
Don't use app_dahdibarge, use ChanSpy.
We all despise the sound of tinny robots
It makes our queues so cold.
To control such an abomination
It's better to not use Wait/SetMusicOnHold.
It's often nice to know properties of a channel
It makes our calls right
We have a nice function called CHANNEL
And so SIPCHANINFO is sent off into the night.
And now things get odd;
Apparently one could delimit with a colon
Properties from the SIPPEER function!
Commas are in; all others are done.
Finally, a word on pipes and commas.
We're sorry. We can't say it enough.
But those compatibility options in asterisk.conf;
To maintain them forever was just too tough.
This patch removes:
* cdr_sqlite
* chan_gtalk
* chan_jingle
* chan_h323
* res_jabber
* app_saycountpl
* app_readfile
* app_dahdibarge
It removes the following applications/functions:
* WaitMusicOnHold
* SetMusicOnHold
* SIPCHANINFO
It removes the colon delimiter from the SIPPEER function.
Finally, it also removes all compatibility options that were configurable from
asterisk.conf, as these all applied to compatibility with Asterisk 1.4 systems.
Review: https://reviewboard.asterisk.org/r/3698/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418019 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Persistent HTTP connection support is needed due to the increased usage of
the Asterisk core HTTP transport and the frequency at which REST API calls
are going to be issued.
* Add http.conf session_keep_alive option to enable persistent
connections.
* Parse and discard optional chunked body extension information and
trailing request headers.
* Increased the maximum application/json and
application/x-www-form-urlencoded body size allowed to 4k. The previous
1k was kind of small.
* Removed a couple inlined versions of ast_http_manid_from_vars() by
calling the function. manager.c:generic_http_callback() and
res_http_post.c:http_post_callback()
* Add missing va_end() in ast_ari_response_error().
* Eliminated unnecessary RAII_VAR() use in http.c:auth_create().
ASTERISK-23552 #close
Reported by: Scott Griepentrog
Review: https://reviewboard.asterisk.org/r/3691/
........
Merged revisions 417880 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417901 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The patch for ASTERISK-23905 that added PFS support in Asterisk depends on the
elliptic curve library support being present in OpenSSL. As it turns out, some
versions of OpenSSL don't have this library - notably the version running on
our build agents.
This patch fixes the build by providing a configure check for the specific
library calls that the PFS patch relies on.
Review: https://reviewboard.asterisk.org/r/3709/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417900 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch enables Perfect Forward Secrecy (PFS) in Asterisk's core TLS API.
Modules that wish to enable PFS should consider the following:
- Ephemeral ECDH (ECDHE) is enabled by default. To disable it, do not
specify a ECDHE cipher suite in a module's configuration, for example:
tlscipher=AES128-SHA:DES-CBC3-SHA
- Ephemeral DH (DHE) is disabled by default. To enable it, add DH parameters
into the private key file, i.e., tlsprivatekey. For an example, see the
default dh2048.pem at
http://www.opensource.apple.com/source/OpenSSL098/OpenSSL098-35.1/src/apps/dh2048.pem?txt
- Because clients expect the server to prefer PFS, and because OpenSSL sorts
its cipher suites by bit strength, (see "openssl ciphers -v DEFAULT")
consider re-ordering your cipher suites in the conf file. For example:
tlscipher=AES128+kEECDH:AES128+kEDH:3DES+kEDH:AES128-SHA:DES-CBC3-SHA:-ADH:-AECDH
will use PFS when offered by the client. Clients which do not offer PFS
fall-back to AES-128 (or even 3DES as recommend by RFC 3261).
Review: https://reviewboard.asterisk.org/r/3647/
ASTERISK-23905 #close
Reported by: Alexander Traud
patches:
tlsPFS_for_HEAD.patch uploaded by Alexander Traud (License 6520)
tlsPFS.patch uploaded by Alexander Traud (License 6520)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417803 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A loop in ast_careful_fwrite exists that will continually attempt to write to
a file stream, even in the presence of EAGAIN/EINTR errors. However, if a
connection that uses ast_careful_fwrite closes suddenly, ast_careful_fwrite's
call to fflush may return EAGAIN/EINTER along with EOF. A subsequent call to
fflush will return EOF but not clear errno, resulting in an infinite loop.
This patch clears errno after it is detected and handled the loop, such that
any subsequent call to fflush will not get erroneously stuck.
Review: https://reviewboard.asterisk.org/r/3704
#ASTERISK-23984 #close
Reported by: Steve Davies
patches:
fflush_loop_fix uploaded by one47 (License 5012)
........
Merged revisions 417797 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 417798 from http://svn.asterisk.org/svn/asterisk/branches/11
........
Merged revisions 417799 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417800 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
res_rtp_asterisk: Add SHA-256 support for DTLS and perform DTLS negotiation on RTCP.
This change fixes up DTLS support in res_rtp_asterisk so it can accept and provide
a SHA-256 fingerprint, so it occurs on RTCP, and so it occurs after ICE negotiation
completes. Configuration options to chan_sip and chan_pjsip have also been added to
allow behavior to be tweaked (such as forcing the AVP type media transports in SDP).
ASTERISK-22961 #close
Reported by: Jay Jideliov
Review: https://reviewboard.asterisk.org/r/3679/
Review: https://reviewboard.asterisk.org/r/3686/
........
Merged revisions 417678 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417679 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds support for the Japanese language to both the say family of
applications, as well as for VoiceMail and VoiceMailMain. A new pack of
language sounds will be released at the same time as the next major version
of Asterisk to support the new language features.
The language features can be enabled using a language code of 'ja'.
Review: https://reviewboard.asterisk.org/r/3477
ASTERISK-23324 #close
Reported by: Kevin McCoy
patches:
app_voicemail.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
say.c.20140226.jb.patch uploaded by Kevin McCoy (License 6586)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417591 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In v12+ the type values from the table are only used by the CEL unit
tests. Since the unit tests were only comparing a generated expected
event with a real event to see if the ie contents matched and using the
same table IE_PLTYPE values to read the event contents, the type
mismatches were not detected.
........
Merged revisions 417565 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417571 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Add the "bridge_technology" extra field key to BRIDGE_ENTER and
BRIDGE_EXIT CEL events to convey the bridge technology in use at the
time the record was generated.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417383 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch allows the current owner of a channel to define various
feature hooks to be made available once the channel has entered a
bridge. This includes any hooks that are setup on the
ast_bridge_features struct such as DTMF hooks, bridge event hooks
(join, leave, etc.), and interval hooks.
Review: https://reviewboard.asterisk.org/r/3649/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417361 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Move eid functions from netsock.c to utils.c. These functions were
already published by utils.h. Flag netsock.h as deprecated and switch
res_pjsip_session.h to use netsock2.h. The only code that still uses
netsock.h is chan_iax2.
ASTERISK-23920 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/3661/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417167 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Appending the ;2 to the user supplied ;1 uniqueid to create the ;2 version
if the user did not also supply an extra uniqueid for the ;2 channel
resulted in allocating a buffer that was one byte too small.
* Fix off by one error in ast_unreal_new_channels() when generating the ;2
uniqueid from the user suppled ;1 version.
* Pulled some long assignment lines from if tests to improve line break
readability in ast_unreal_new_channels().
........
Merged revisions 417119 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
