Patch updates skinny devices with a SKINNY_CONNECTED callstate if an
inbound ringing or callwaiting call is answered elsewhere.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405367 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Error "unused variable i in dahdi_create_channel_range" when compiling
in dev-mode. Small restructure to dahdi_create_channel_range to move
the for(x) loop and int i,x to a block within the IFDEF.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@405268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dahdi show channels output slices the callerid (which is dnid copied over on
PRI channels). If the channel naming structures look like:
'DAHDI/i1/1408409XXXX-6'
then the output slices 1408409XXXX down to 1408409XXX. This patch just opens
it up to 15 chars so you can see the whole thing.
(closes issue ASTERISK-22918)
Reported by: outtolunc
Patches:
svn_chan_dahdi.c.format12_15.diff.txt uploaded by outtolunc (license 5198)
........
Merged revisions 404784 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 404785 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404786 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel creation in Asterisk is broken up into two steps: requesting and calling.
In some cases a channel may be requested but never called. This happens in the
ChanIsAvail dialplan application for determining if something is reachable or
not. The PJSIP channel driver did not take this situation into account and
attempted to end a session that was never called out on.
The code now checks the session state to determine if the session has been
called out on and if not terminates it instead of ending it.
(closes issue ASTERISK-23074)
Reported by: Kilburn
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404652 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change is in preparation for external MWI support.
Removed code from the system for normal mailbox handling that appends
@default to the mailbox identifier if it does not have a context. The
only exception is the legacy hasvoicemail users.conf option. The legacy
option will only work for app_voicemail mailboxes. The system cannot make
any assumptions about the format of the mailbox identifer used by
app_voicemail.
chan_sip and chan_dahdi/sig_pri had the most changes because they both
tried to interpret the mailbox identifier. chan_sip just stored and
compared the two components. chan_dahdi actually used the box
information.
The ISDN MWI support configuration options had to be reworked because
chan_dahdi was parsing the box@context format to get the box number. As a
result the mwi_vm_boxes chan_dahdi.conf option was added and is documented
in the chan_dahdi.conf.sample file.
Review: https://reviewboard.asterisk.org/r/3072/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404348 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Moved channel locking into setsubstate so that a process can complete
working on a sub before another starts changing it. The existing code
was causing some Fracks with schedule deletion.
Removed multiple rtp cleanup. Now only cleansup up once, fixing ao2
object cleanup issues.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404306 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On session registration, if device is already reporting that it is
connected to a device, an innocuous packet (update time) is sent to
the already connected device. If the tcp connection is down, the
device will be unregistered and the new connection allowed.
Without this patch, network issues can see a situation where a device
can not reregister until after 3*timeout.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404292 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@404237 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The change contains a slightly adjusted patch that was on the issue
(submitted by kmoore). A fix was made by adding in a bridge lock
while calling bridge_start/stop from the framehook callback. Since
the framehook callback is not called from the bridging core the bridge
is not locked, but needs to be before calling bridge_start.
(closes issue ASTERISK-22749)
Reported by: Kinsey Moore
Review: https://reviewboard.asterisk.org/r/3066/
Patches:
lock_inversion.diff uploaded by kmoore (license 6273)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@403767 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch was intended to eliminate a deadlock that occurs when
masquerades occur in pjsip channels, but has some potential side
effects. Mark Michelson is currently working on addressing this
problem from another angle.
(issue ASTERISK-22936)
Reported by: Jonathan Rose
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@403705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds CHANNEL read support for chan_pjsip. This allows the dialplan
to use the CHANNEL function on a chan_pjsip channel to obtain run-time
information about the channel from the PJSIP channel driver and the PJSIP
stack. This includes:
* RTP information, including source/destination media addresses, whether or
not the media is secure, held, and other properties.
* RTCP information. This includes sets of parseable information, as well as
individual statistic attriutes.
* PJSIP information. This includes URIs, local/remote signalling addresses,
whether or not the signalling is secure, and other properties.
* The endpoint name. This can be used in conjunction with the PJSIP_ENDPOINT
function to obtain more detailed endpoint information.
Review: https://reviewboard.asterisk.org/r/3038/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@403618 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@403311 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk will sometimes core dump during caller id read on analog
channels due to a negative return value from the read() in
my_get_callerid that slips through as a negative length argument to
callerid_feed() if the errno returned by DAHDI is ELAST. This change
ensures that the negative return is treated properly even when it is
ELAST.
(closes issue ASTERISK-22746)
Reported by: Michael Walton
Patches:
chan_dahdi_cid_crash_fix.r401410.patch uploaded by Michael Walton (License 6502)
........
Merged revisions 402708 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402709 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@402710 65c4cc65-6c06-0410-ace0-fbb531ad65f3
For outbound register requests the tag on the From line was
updated every 20 seconds prior to a successful registration
and also once for each registration renewal. That behavior
can possibly cause the registration to be denied because of
the different tag, and is not aligned with the intention of
RFC 3261 8.1.3.5 "... request constitutes a new transaction
and SHOULD have the same value of the Call-ID, To, and From
of the previous request...". This updates chan_sip to have
a field to keep the local tag in the registration structure
and use that tag for registration requests where the callid
is also unchanged.
(closes issue ASTERISK-12117)
Reported by: Pawel Pierscionek
Review: https://reviewboard.asterisk.org/r/2988/
........
Merged revisions 402604 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 402605 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@402606 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While the structure passed to ast_get_ip should be set memset to 0, thus
initializing the ss_family member to 0, explicitly setting it to AST_AF_UNSPEC
is more portable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@402507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This started off as a fix for the failing IAX2 acl_call test in the Asterisk
Test Suite. When inspecting why that test was failing, it became clear that all
attempts to bind to any local loopback address was failing:
[Nov 2 15:56:28] VERBOSE[15787] chan_iax2.c: == Binding IAX2 to address
127.0.0.1:4569
[Nov 2 15:56:28] DEBUG[15787] netsock2.c: Splitting '127.0.0.1' into...
[Nov 2 15:56:28] DEBUG[15787] netsock2.c: ...host '127.0.0.1' and port ''.
[Nov 2 15:56:28] ERROR[15787] netsock2.c: getaddrinfo("127.0.0.1", "(null)",
...): ai_family not supported
[Nov 2 15:56:28] WARNING[15787] acl.c: Unable to lookup '127.0.0.1'
While there's conceivably other ways for getaddrino to return EAI_FAMILY, the
most common way is if AF_INET, AF_INET6, or AF_UNSPEC is not provided as the
desired family. The culprit was the call to ast_get_ip, defined in acl.h. This
function uses the family from the passed in addr object (which it will also
populate when it returns!) when it eventually calls getaddrinfo.
This patch fixes the use of ast_get_ip that were not specifying the family in
chan_iax2. This prevents uninitialized use of the structure, so that the
addresses resolve correctly.
Review: https://reviewboard.asterisk.org/r/2991
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@402505 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The presentation indicator in a callerid (e.g. set by dialplan function
Set(CALLERID(name-pres)= ...)) is not checked when SIP Dialog Info Notifies
are generated during extension monitoring. Added a check to make sure the
name and/or number presentations on the callee (remote identity) are set to
allow. If they are restricted then "anonymous" is used instead.
(closes issue AST-1175)
Reported by: Thomas Arimont
Review: https://reviewboard.asterisk.org/r/2976/
........
Merged revisions 402450 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@402452 65c4cc65-6c06-0410-ace0-fbb531ad65f3
While looking at ASTERISK-22236, Walter Doekes pointed out that when running
"sip show peers", the setting being displayed can be confusing. The display of
"N" used to mean NAT (i.e. yes). The NAT setting has gone through many
different changes resulting in the display of different characters to try and
convey what the current setting is for 'Forcerport' (A for Auto and Forcerport
is currently on, a for Auto but Forcerport is off, Y for yes, and N for no).
During the initial code review to try and clarify these settings (especially
since "N" no longer meant what it used to mean in prior versions of Asterisk),
Mark Michelson suggested using the full space available to display the settings
which helped to make the settings very clear. That was a great suggestion.
Therefore, this patch does the following:
* The column for 'Forcerport' now will show: Auto (Yes), Auto (No), Yes, or No.
* A column for the 'Comedia' setting has been added. It too will display the
setting in a non-cryptic way: Auto (Yes), Auto (No), Yes, or No.
* UPGRADE.txt has been updated to document this change.
(closes issue ASTERISK-22728)
Reported by: Walter Doekes
Tested by: Michael L. Young
Patches:
asterisk-forcerport-display-clarification_v3.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2941
........
Merged revisions 402111 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@402112 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adapts the behaviour of avpf to only impact the format of outgoing calls. For
inbound calls, both AVP and AVPF calls will be accepted regardless of the value
of avpf in the configuration.
(closes issue ASTERISK-22005)
Reported by: Torrey Searle
Patches:
optional_avpf_trunk.patch uploaded by tsearle (license 5334)
........
Merged revisions 401884 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@401885 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also covers ast_app_parse_timelen-fail-zero-length.patch, but the patch was
replaced with one of my own.
(issue ASTERISK-22467)
Reported by: Corey Farrell
Patches:
chan_dahdi-cleanup_push.patch uploaded by coreyfarrell (license 5909)
clicompat-r2.patch uploaded by coreyfarrell (license 5909)
codecs-ilbc-doCPLC.patch uploaded by coreyfarrell (license 5909)
data-cleanup-test-registration.patch uploaded by coreyfarrell (license 5909)
main-asterisk-kill-listener.patch uploaded by coreyfarrell (license 5909)
........
Merged revisions 401704 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 401705 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@401706 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When reworking chan_iax2 for IPv6, the ability to bind to multiple addresses
was removed by mistake. This patch restores this functionality and adds notes
about IPv6 addresses in the sample config.
(closes issue ASTERISK-22741)
Reported by: Joshua Colp
Tested by: Michael L. Young
Patches:
asterisk-22741-fix-binding-multiple-addr.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2945/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@401488 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This fixes address lookup for incoming calls without a peer definition.
The address family was unset instead of being set to AST_AF_UNSPEC
which was causing lookup failures on "127.0.0.1". This is one of the
causes of the current failure of the app_page integration test.
Review: https://reviewboard.asterisk.org/r/2933/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@401291 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When trying to determine if a peer is behind NAT, we should not be using the
ports when comparing addresses.
This patch removes the port from being checked and just useds the addresses
now.
(closes issue ASTERISK-22729)
Reported by: Michael L. Young
Tested by: Michael L. Young
Patches:
asterisk-remove-using-port-for-nat-check.diff
uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2927/
........
Merged revisions 401182 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@401183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A condition was added in a commit to fix ASTERISK-21374, that, if the
SIP_PAGE3_NAT_AUTO_RPORT flag was set, to then copy a peer's SIP_NAT_FORCE_RPORT
flag to the dialog. This condition should not have been there since it assumed
that if Asterisk is in an environment where NAT is involved, that the auto_* nat
settings or force_rport setting would be on in the global settings. If the nat
setting in the global setting is set to 'nat=no' and then turned on for peers
(which is not quite the recommended way, although it is allowed) this flag is
never copied to the dialog resulting in problems like, REGISTER replies going
to the wrong port.
This patch removes this conditional check and will now always use the peer's
flag which by this point in the code the checks on whether the peer is behind
NAT or not (if using auto_force_rport) have already been run.
(closes issue ASTERISK-22236)
Reported by: Filip Frank
Tested by: Michael L. Young
Patches:
asterisk-2236-always-set-rport.diff uploaded
by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2919/
........
Merged revisions 401167 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@401168 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a 200 OK for an initial INVITE is received, we were doing
the right thing by ACKing and sending an immediate BYE. However,
we also were doing the wrong thing and queuing an answer frame,
thus causing the call to be answered. This would cause the call
to be hung up by the channel thread, thus resulting in a second
BYE being sent out.
In this fix, I also have set the hangupcause to be correct since
the initial BYE being sent by Asterisk had an unknown hangup
cause. I have changed to using "Bearer capabilty not available"
since the call was hung up due to an SDP offer/answer error.
(closes issue ASTERISK-22621)
reported by Kinsey Moore
........
Merged revisions 400970 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 400971 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/12@400984 65c4cc65-6c06-0410-ace0-fbb531ad65f3
