conferences. We were using the 'user number' field to compare against the
maximum allowed users, which works assuming users with lower user numbers
didn't leave the conference.
(closes issue #14117)
Reported by: sergedevorop
Patches:
20090114__bug14117-2.diff.txt uploaded by seanbright (license 71)
Tested by: sergedevorop
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168705 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168628 | mmichelson | 2009-01-14 18:11:01 -0600 (Wed, 14 Jan 2009) | 16 lines
Fix some crashes from bad datastore handling in app_queue.c
* The queue_transfer_fixup function was searching for and removing
the datastore from the incorrect channel, so this was fixed.
* Most datastore operations regarding the queue_transfer datastore
were being done without the channel locked, so proper channel locking
was added, too.
(closes issue #14086)
Reported by: ZX81
Patches:
14086v2.patch uploaded by putnopvut (license 60)
Tested by: ZX81, festr
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168629 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r168593 | twilson | 2009-01-13 19:27:18 -0600 (Tue, 13 Jan 2009) | 20 lines
Don't overflow when paging more than 128 extensions
The number of available slots for calls in app_page was hardcoded to 128.
Proper bounds checking was not in place to enforce this limit, so if more than
128 extensions were passed to the Page() app, Asterisk would crash. This patch
instead dynamically allocates memory for the ast_dial structures and removes
the (non-functional) arbitrary limit.
This issue would have special importance to anyone who is dynamically creating
the argument passed to the Page application and allowing more than 128
extensions to be added by an outside user via some external interface.
The patch posted by a_villacis was slightly modified for some coding guidelines
and other cleanups. Thanks, a_villacis!
(closes issue #14217)
Reported by: a_villacis
Patches:
20080912-asterisk-app_page-fix-buffer-overflow.patch uploaded by a (license 660)
Tested by: otherwiseguy
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168594 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The "No one is answering..." verbose message contained 3 numbers that were not
explained in any way to whoever was viewing the message. It is more helpful now
since the message explains what the numbers mean. Also, the message has been
downgraded to "DEBUG" level.
(closes issue #14172)
Reported by: caio1982
Patches:
queue_answering_debug.diff uploaded by caio1982 (license 22)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@168579 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the functionality to app_queue of calculating
the average amount of time that channels are bridged for a
queue. The algorithm used to calculate the average is the same
exponential average currently used to calculate the average holdtime.
See the CHANGES file to see the methods you may use to view this
information.
(closes issue #13960)
Reported by: coolmig
Patches:
app_queue.c.diff.trunk-r158840 uploaded by coolmig (license 621)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@167792 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When placing a call to a queue which ran a gosub on the member's
channel, Asterisk would crash every time, stemming from the fact
that the member's channel was being hung up unexpectedly when the
Gosub completed. The necessary change was pretty much copied and
pasted from app_dial's similar changes made last week.
I also took the opportunity to change a LOG_DEBUG message in
app_dial to use ast_debug. I am guessing this was due to a direct
merge from 1.4 that was not corrected to use trunk's preferred
syntax.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166861 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
In order to merge this 1.4 patch into trunk,
I had to resolve some conflicts and wait for
Russell to make some changes to res_agi.
I re-ran all the tests; 39 calls in all, and
made fairly careful notes and comparisons: I
don't want this to blow up some aspect of
asterisk; I completely removed the KEEPALIVE
from the pbx.h decls. The first 3 scenarios
involving feature park; feature xfer to 700;
hookflash park to Park() app call all behave
the same, don't appear to leave hung channels,
and no crashes.
........
r166093 | murf | 2008-12-19 15:30:32 -0700 (Fri, 19 Dec 2008) | 131 lines
This merges the masqpark branch into 1.4
These changes eliminate the need for (and use of)
the KEEPALIVE return code in res_features.c;
There are other places that use this result code
for similar purposes at a higher level, these appear
to be left alone in 1.4, but attacked in trunk.
The reason these changes are being made in 1.4, is
that parking ends a channel's life, in some situations,
and the code in the bridge (and some other places),
was not checking the result code properly, and dereferencing
the channel pointer, which could lead to memory corruption
and crashes.
Calling the masq_park function eliminates this danger
in higher levels.
A series of previous commits have replaced some parking calls
with masq_park, but this patch puts them ALL to rest,
(except one, purposely left alone because a masquerade
is done anyway), and gets rid of the code that tests
the KEEPALIVE result, and the NOHANGUP_PEER result codes.
While bug 13820 inspired this work, this patch does
not solve all the problems mentioned there.
I have tested this patch (again) to make sure I have
not introduced regressions.
Crashes that occurred when a parked party hung up
while the parking party was listening to the numbers
of the parking stall being assigned, is eliminated.
These are the cases where parking code may be activated:
1. Feature one touch (eg. *3)
2. Feature blind xfer to parking lot (eg ##700)
3. Run Park() app from dialplan (eg sip xfer to 700)
(eg. dahdi hookflash xfer to 700)
4. Run Park via manager.
The interesting testing cases for parking are:
I. A calls B, A parks B
a. B hangs up while A is getting the numbers announced.
b. B hangs up after A gets the announcement, but
before the parking time expires
c. B waits, time expires, A is redialed,
A answers, B and A are connected, after
which, B hangs up.
d. C picks up B while still in parking lot.
II. A calls B, B parks A
a. A hangs up while B is getting the numbers announced.
b. A hangs up after B gets the announcement, but
before the parking time expires
c. A waits, time expires, B is redialed,
B answers, A and B are connected, after
which, A hangs up.
d. C picks up A while still in parking lot.
Testing this throroughly involves acting all the permutations
of I and II, in situations 1,2,3, and 4.
Since I added a few more changes (ALL references to KEEPALIVE in the bridge
code eliimated (I missed one earlier), I retested
most of the above cases, and no crashes.
H-extension weirdness.
Current h-extension execution is not completely
correct for several of the cases.
For the case where A calls B, and A parks B, the
'h' exten is run on A's channel as soon as the park
is accomplished. This is expected behavior.
But when A calls B, and B parks A, this will be
current behavior:
After B parks A, B is hung up by the system, and
the 'h' (hangup) exten gets run, but the channel
mentioned will be a derivative of A's...
Thus, if A is DAHDI/1, and B is DAHDI/2,
the h-extension will be run on channel
Parked/DAHDI/1-1<ZOMBIE>, and the
start/answer/end info will be those
relating to Channel A.
And, in the case where A is reconnected to
B after the park time expires, when both parties
hang up after the joyful reunion, no h-exten
will be run at all.
In the case where C picks up A from the
parking lot, when either A or C hang up,
the h-exten will be run for the C channel.
CDR's are a separate issue, and not addressed
here.
As to WHY this strange behavior occurs,
the answer lies in the procedure followed
to accomplish handing over the channel
to the parking manager thread. This procedure
is called masquerading. In the process,
a duplicate copy of the channel is created,
and most of the active data is given to the
new copy. The original channel gets its name
changed to XXX<ZOMBIE> and keeps the PBX
information for the sake of the original
thread (preserving its role as a call
originator, if it had this role to begin
with), while the new channel is without
this info and becomes a call target (a
"peer").
In this case, the parking lot manager
thread is handed the new (masqueraded)
channel. It will not run an h-exten
on the channel if it hangs up while
in the parking lot. The h exten will
be run on the original channel instead,
in the original thread, after the bridge
completes.
See bug 13820 for our intentions as
to how to clean up the h exten behavior.
Review: http://reviewboard.digium.com/r/29/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@166665 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165889 | russell | 2008-12-19 09:03:02 -0600 (Fri, 19 Dec 2008) | 9 lines
Ensure that the chanspy datastore is fully initialized.
This patch resolved some random crash issues observed by a user on a BSD system
(closes issue #14111)
Reported by: ys
Patches:
app_chanspy.c.diff uploaded by ys (license 281)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165890 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is part of an effort to completely remove AST_PBX_KEEPALIVE and other
similar return codes from the source. While this usage was perfectly safe,
there are others that are problematic. Since we know ahead of time that
we do not want to PBX to destroy the channel, the PBX API has been changed
so that information can be provided as an argument, instead, thus removing
the need for the KEEPALIVE return value.
Further changes to get rid of KEEPALIVE and related code is being done by
murf. There is a patch up for that on review 29.
Review: http://reviewboard.digium.com/r/98/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165723 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Jared Smith suggested that we add a way to be able to set variables
and functions on the outbound channel. I think that it's a great idea, so I
have added it as a todo so that it gets done at some point.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165469 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r165255 | mmichelson | 2008-12-17 14:51:38 -0600 (Wed, 17 Dec 2008) | 7 lines
Fix some memory leaks found while looking at how realtime
configs are handled.
Also cleaned up some coding guidelines violations in app_realtime.c,
mostly related to spacing
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165318 65c4cc65-6c06-0410-ace0-fbb531ad65f3
it was not being used before. Also, I've moved the urgent
folder check in messagecount() up a bit so that the flow is
a bit better.
This was something I noticed while taking a look at issue
#13973, although I don't think this is the underlying cause
of the issue.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@165142 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r164876 | russell | 2008-12-16 15:10:44 -0600 (Tue, 16 Dec 2008) | 6 lines
Do not dereference the channel if AST_PBX_KEEPALIVE has been returned.
This is a bug I noticed while looking at the code for app_macro. This return code
means that another thread has assumed ownership of the channel and it can no longer
be touched. (I hate this return code with a passion, by the way.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164877 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the 'i' options for app_dial and app_queue, in that they will ignore
any attempts by phones to forward the call.
(closes issue #13977)
Reported by: putnopvut
Patches:
page_ignore_forwards.patch uploaded by putnopvut (license 60)
Tested by: putnopvut, acunningham
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164428 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix reference counting used in the __queues_show function
* Add code to be sure that the "queue show" command does not
print information for a realtime queue which has been deleted
from the backend
* Add a missing unref to the realtime queue loading function for
the case where a queue is in the module's container but has been
deleted from the realtime backend
(closes issue #14033)
Reported by: cristiandimache
Patches:
14033.patch uploaded by putnopvut (license 60)
Tested by: cristiandimache
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@164268 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163080 | mmichelson | 2008-12-11 10:24:43 -0600 (Thu, 11 Dec 2008) | 14 lines
Fix a potential crash due to unsafe datastore handling.
This patch also contains a conversion from using long to time_t
for representing times for a queue, as well as some whitespace
fixes.
(closes issue #14060)
Reported by: nivek
Patches:
datastore_fixup.patch.corrected uploaded by nivek (license 636)
with slight modification from me
Tested by: nivek
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163081 65c4cc65-6c06-0410-ace0-fbb531ad65f3
