The value "none" is specified in the config file as a valid value for
the "video_mode" option. The code prior to the ACO conversion did not
check for "none", but just ignored it and relied on the default zero
value. The parsing with ACO is more strict, so without handling
"none" specifically, parsing would fail.
When parsing failed, but the module loaded anyway, the config info
would never be stored, and one place in the code did not check for
this case and would segfault. It was also possible that the
aco_info struct's internals would be destroyed and used as well.
This patch keeps the module from loading after parse failures, adds
the "none" option to "video_mode", registers CLI functions only
after parsing has completed, checks the config data for NULL before
accessing it, and returns -1 on some allocation failures when
initializing.
(closes issue ASTERISK-20159)
Reported by: Birger "WIMPy" Harzenetter
Tested by: Birger "WIMPy" Harzenetter
Patches:
confbridge_fix3.txt uploaded by Terry Wilson
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370341 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The paragraph describing the SubEvent belongs with the SubEvent parameter
itself, and not with its enum values. The order of parsing was placing
the description after the last enum, which isn't correct.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@370329 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The heard and deleted arrays in the voicemail state structure were not
handled properly following the memory leak fix in r354890 and a fix for
an invalid free in r356797. This could result in accessing and writing
into freed memory. The allocation for these arrays has been reworked
to avoid the possibility of invalid frees, access of freed memory, and
crashes that were occurring as a result of this.
Locking around accesses and modifications of the voicemail state
structure members dh_arraysize, heard, and deleted has been added to
prevent simultaneous modification and access when IMAP storage is in
use. If IMAP storage is not in use, this locking is not compiled in.
Review: https://reviewboard.asterisk.org/r/1994/
(closes issue ASTERISK-19923)
Reported by: Dan Delaney
Tested by: Dan Delaney, Julian Yap
Patches:
vm_alloc_fix.diff uploaded by kmoore (license 6273)
........
Merged revisions 369652 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369653 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369676 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Manager_mixmonitor included an early return on failed executions of mixmonitor
that would result in a leaked channel reference.
(closes issue ASTERISK-19943)
Reported by: Mark Murawski
Patches:
mixmonitor-trunk-368394.patch uploaded by Mark Murawski (license 5791)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369644 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Hangup handlers are an alternative to the h extension. They can be used
in addition to the h extension. The idea is to attach a Gosub routine to
a channel that will execute when the call hangs up. Whereas which h
extension gets executed depends on the location of dialplan execution when
the call hangs up, hangup handlers are attached to the call channel. You
can attach multiple handlers that will execute in the order of most
recently added first.
(closes issue ASTERISK-19549)
Reported by: Mark Murawski
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/2002/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369493 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch adds the core changes necessary to support AMI event documentation
in the source files of Asterisk, and adds documentation to those AMI events
defined in the core application modules. Event documentation is built from
the source by two new python scripts, located in build_tools:
get_documentation.py and post_process_documentation.py.
The get_documentation.py script mirrors the actions of the existing AWK
get_documentation scripts, except that it will scan the entirety of a source
file for Asterisk documentation. Upon encountering it, if the documentation
happens to be an AMI event, it will attempt to extract information about the
event directly from the manager event macro calls that raise the event. The
post_process_documentation.py script combines manager event instances that
are the same event but documented in multiple source files. It generates
the final core-[lang].xml file.
As this process can take longer to complete than a typical 'make all', it
is only performed if a new make target, 'full', is chosen.
Review: https://reviewboard.asterisk.org/r/1967/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369346 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make non-normal dialplan execution routines be able to run on a hung up
channel. This is preparation work for hangup handler routines.
* Fixed ability to support relative non-normal dialplan execution
routines. (i.e., The context and exten are optional for the specified
dialplan location.) Predial routines are the only non-normal routines that
it makes sense to optionally omit the context and exten. Setting a hangup
handler also needs this ability.
* Fix Return application being able to restore a dialplan location
exactly. Channels without a PBX may not have context or exten set.
* Fixes non-normal execution routines like connected line interception and
predial leaving the dialplan execution stack unbalanced. Errors like
missing Return statements, popping too many stack frames using StackPop,
or an application returning non-zero could leave the dialplan stack
unbalanced.
* Fixed the AGI gosub application so it cleans up the dialplan execution
stack and handles the autoloop priority increments correctly.
* Eliminated the need for the gosub_virtual_context return location.
Review: https://reviewboard.asterisk.org/r/1984/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368985 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This was essentially duplicated functionality where normal channels used
AST_CAUSE_ANSWERED_ELSEWHERE while local channels and queues used
AST_FLAG_ANSWERED_ELSEWHERE. This removes the flag and converts that usage
into AST_CAUSE_ANSWERED_ELSEWHER usage.
Review: https://reviewboard.asterisk.org/r/1944
(closes issue ASTERISK-19865)
Patch-by: Birger Harzenetter
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Presence support has been added. This is accomplished by
allowing for presence hints in addition to device state
hints. A dialplan function called PRESENCE_STATE has been
added to allow for setting and reading presence. Presence
can be transmitted to Digium phones using custom XML
elements in a PIDF presence document.
Voicemail has new APIs that allow for moving, removing,
forwarding, and playing messages. Messages have had a new
unique message ID added to them so that the APIs will work
reliably. The state of a voicemail mailbox can be obtained
using an API that allows one to get a snapshot of the mailbox.
A voicemail Dialplan App called VoiceMailPlayMsg has been
added to be able to play back a specific message.
Configuration hooks have been added. Configuration hooks
allow for a piece of code to be executed when a specific
configuration file is loaded by a specific module. This is
useful for modules that are dependent on the configuration
of other modules.
chan_sip now has a public method that allows for a custom
SIP INFO request to be sent mid-dialog. Digium phones use
this in order to display progress bars when files are played.
Messaging support has been expanded a bit. The main
visible difference is the addition of an AMI action
MessageSend.
Finally, a ParkingLots manager action has been added in order
to get a list of parking lots.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@368435 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fix only issue pointed out by deprecated_REVERSE_INULL.txt for
app_meetme.c in find_user().
* Change use of %i to %d in sscanf() in find_user(). The use of %i gives
unexpected parsing because it can accept hex, octal, and decimal integer
formats.
* Changed other uses of %i in app_meetme() to use %d for consistency.
(issue ASTERISK-19648)
Reported by: Matt Jordan
........
Merged revisions 367906 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367907 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367908 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial and Queue I option is intended to block connected line updates
and redirecting updates. However, it is a feature that when a call is
locally redirected, the I option is disabled if the redirected call runs
as a local channel so the administrator can have an opportunity to setup
new connected line information. Unfortunately, the Dial and Queue I
option is disabled for *all* forked calls if one of those calls is
redirected.
* Make the Dial and Queue I option apply to each outgoing call leg
independently. Now if one outgoing call leg is locally redirected, the
other outgoing calls are not affected.
* Made Dial not pass any redirecting updates when forking calls.
Redirecting updates do not make sense for this scenario.
* Made Queue not pass any redirecting updates when using the ringall
strategy. Redirecting updates do not make sense for this scenario.
* Fixed deadlock potential with chan_local when Dial and Queue send
redirecting updates for a local redirect.
* Converted the Queue stillgoing flag to a boolean bitfield.
(closes issue ASTERISK-19511)
Reported by: rmudgett
Tested by: rmudgett
Review: https://reviewboard.asterisk.org/r/1920/
........
Merged revisions 367678 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 367679 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367693 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A patch introduced in r354938 made it so that ConfBridge would not attempt to
play sound files if those files did not exist. Unfortunately, ConfBridge uses
the same underlying function, play_sound_helper, to playback both sound files
and numbers to callers. When a number is being played back, the name of the
sound file is expected to be NULL. This NULL value was passed into a function
that tested for the existance of a sound file and is not tolerant to NULL
file names, causing a crash.
This patch fixes the behavior, such that if a sound file does not exist we
do not attempt to play it, but we only attempt that check if the a sound file
was specified in the first place. If a sound file was not specified, we use
the 'play number' logic in the helper function.
(closes issue ASTERISK-19899)
Reported by: Florian Gilcher
Tested by: Florian Gilcher
patches:
asterisk-19899.diff uploaded by mjordan (license 6283)
........
Merged revisions 367562 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367563 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Adds a number of methods for controlling the setting of 'ringinuse'
which is basically the same concept as the old ignorebusy setting,
only now the per member setting always controls whether or not the
member is actually ringed while in use. A CLI command and a manager
action have been added to change a given queue member's ringinuse
option while Asterisk is running and the an argument has been added
for adding members with deliberately set ringinuse in queues.conf
Some effort has been made to ensure compatability with dialplans and
databases still referring to 'ignorebusy'.
(issue ASTERISK-19536)
reported by: Philippe Lindheimer
Review: https://reviewboard.asterisk.org/r/1919/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@367080 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch addresses a number of memory leaks in a variety of modules that were
found by a static analysis tool. A brief summary of the changes:
* app_minivm: free ast_str objects on off nominal paths
* app_page: free the ast_dial object if the requested channel technology
cannot be appended to the dialing structure
* app_queue: if a penalty rule failed to match any existing rule list
names, the created rule would not be inserted and its memory
would be leaked
* app_read: dispose of the created silence detector in the presence of
off nominal circumstances
* app_voicemail: dispose of an allocated unique ID field for MWI event
un-subscribe requests in off nominal paths; dispose of
configuration objects when using the secret.conf option
* chan_dahdi: dispose of the allocated frame produced by ast_dsp_process
* chan_iax2: properly unref peer in CLI command "iax2 unregister"
* chan_sip: dispose of the allocated frame produced by sip_rtp_read's
call of ast_dsp_process; free memory in parse unit tests
* func_dialgroup: properly deref ao2 object grhead in nominal path of
dialgroup_read
* func_odbc: free resultset in off nominal paths of odbc_read
* cli: free match_list in off nominal paths of CLI match completion
* config: free comment_buffer/list_buffer when configuration file load
is unchanged; free the same buffers any time they were
created and config files were processed
* data: free XML nodes in various places
* enum: free context buffer in off nominal paths
* features: free ast_call_feature in off nominal paths of applicationmap
config processing
* netsock2: users of ast_sockaddr_resolve pass in an ast_sockaddr struct
that is allocated by the method. Failures in
ast_sockaddr_resolve could result in the users of the method
not knowing whether or not the buffer was allocated. The
method will now not allocate the ast_sockaddr struct if it
will return failure.
* pbx: cleanup hash table traversals in off nominal paths; free
ignore pattern buffer if it already exists for the specified
context
* xmldoc: cleanup various nodes when we no longer need them
* main/editline: various cleanup of pointers not being freed before being
assigned to other memory, cleanup along off nominal paths
* menuselect/mxml: cleanup of value buffer for an attribute when that attribute
did not specify a value
* res_calendar*: responses are allocated via the various *_request method
returns and should not be allocated in the various
write_event methods; ensure attendee buffer is freed if no
data exists in the parsed node; ensure that calendar objects
are de-ref'd appropriately
* res_jabber: free buffer in off nominal path
* res_musiconhold: close the DIR* object in off nominal paths
* res_rtp_asterisk: if we run out of ports, close the rtp socket object and free
the rtp object
* res_srtp: if we fail to create the session in libsrtp, destroy the
temporary ast_srtp object
(issue ASTERISK-19665)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/1922
........
Merged revisions 366880 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366881 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is the starting point for the Asterisk 11: Who Hung Up work and provides
a framework which will allow channel drivers to report the types of hangup
cause information available in SIP_CAUSE without incurring the overhead of the
MASTER_CHANNEL dialplan function. The initial implementation only includes
cause generation for chan_sip and does not include cause code translation
utilities.
This change deprecates SIP_CAUSE and replaces its method of reporting cause
codes with the new framework. This change also deprecates the 'storesipcause'
option in sip.conf.
Review: https://reviewboard.asterisk.org/r/1822/
(Closes issue SWP-4221)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366408 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Before this patch, the predial routine executes on the ;1 channel of a
local channel pair. Executing predial on the ;1 channel of a local
channel pair is of limited utility. Any channel variables set by the
predial routine executing on the ;1 channel will not be available when the
local channel executes dialplan on the ;2 channel.
* Create ast_pre_call() and an associated pre_call() technology callback
to handle running the predial routine. If a channel technology does not
provide the callback, the predial routine is simply run on the channel.
Review: https://reviewboard.asterisk.org/r/1903/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366183 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This resolves core findings from ASTERISK-19650 numbers 0-2, 6, 7, 9-11, 14-20,
22-24, 28, 30-32, 34-36, 42-56, 82-84, 87, 89-90, 93-102, 104, 105, 109-111,
and 115. Finding numbers 26, 33, and 29 were already resolved. Those skipped
were either extended/deprecated or in areas of code that shouldn't be
disturbed.
(Closes issue ASTERISK-19650)
........
Merged revisions 366167 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 366168 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@366169 65c4cc65-6c06-0410-ace0-fbb531ad65f3
If you hit the wrong DTMF digit trying to accept/decline a FollowMe call,
you had to wait for the prompt to repeat to try again.
* Make FollowMe compare the last DTMF digits received to the
accept/decline matching strings.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365951 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The FollowMe caller call leg is usually answered and listening to MOH.
The caller could put the call on hold while FollowMe is looking for a
winner. The winning outgoing call is now immediately placed on hold if
the caller has put the call on hold before the winning call was selected.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365829 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Why this tiny struct was malloced instead of the 28k struct in the last
change is beyond me. Just doing my part to help stamp out sillyness.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365766 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Sending the 'I' command from an external process will cause the current playlist
to be cleared, including stopping any audio file that is currently playing. This
is useful when you want to interrupt audio playback only when specific DTMF is
entered by the caller.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@365751 65c4cc65-6c06-0410-ace0-fbb531ad65f3
