This change basically reverts the change reviewed in
https://reviewboard.asterisk.org/r/374/ and instead limits the
updating of the RTP synchronization source to only those times when we
detect that the other side of the conversation has changed the ssrc.
The problem is that SRCUPDATE control frames are sent many times where
we don't want a new ssrc, including whenever Asterisk has to send DTMF
in a normal bridge. This is also not the first time that this mistake
has been made. The initial implementation of the ast_rtp_new_source
function also changed the ssrc--and then it was removed because of
this same issue. Then, we put it back in again to fix a different
issue. This patch attempts to only change the ssrc when we see that
the other side of the conversation has changed the ssrc.
It also renames some functions to make their purpose more clear.
Review: https://reviewboard.asterisk.org/r/540/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@252089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The first real test added to the external test suite found a pretty nasty crash
that occurred in Asterisk trunk. The crash was due to a race condition between
the REFER handling and channel destruction in the channel thread. After the
transfer has been completed, we go back to the transferrer channel and try to
lock it so we can fire off a CEL event. However, there was no guarantee that
the channel was still around at that point since it's racing against the channel
thread.
Since ast_channel is a reference counted object, the fix is simple. The code
unlocks the transferrer channel before finally completing the transfer with
an async goto. At this point the channel thread is going to start call tear
down and the channel will eventually be destroyed. To ensure that the channel
is valid when we want to fire off the CEL event, increase the channel's
reference count.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@251137 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The get_local_address() function for an RTP instance was used when building an
SDP, but the results were not honored. The RTP engine activate() function was
not being used once we have determined that media will now flow.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@250917 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When configuring the adaptive jitterbuffer, the target_extra
value not only could not be set from the configuration, but was
not even being set to its proper default. This value is required
in order for the adaptive jitterbuffer to work correctly. To resolve
this a config option has been added to expose this value to the conf
files, and a default value is provided when no config specific value
is present.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@249893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Uncommenting the REF_DEBUG definition where it was in the source
resulted in only a small part of the astobj2 references being logged
to a file. Moving this up higher in the include list causes all references
to be logged as they should be.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@248347 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I'm working with this code right now trying to analyze a deadlock.
This change is just to clean up a few things before I make a more
complex patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247915 65c4cc65-6c06-0410-ace0-fbb531ad65f3
NULL means the value is not specified for the column, which normally means
the driver uses whatever is the default value. However, on MySQL, placing
a NULL in either a float or integer column results in a retrieval of the 0
value. Hence, users get an errant error on load. This patch suppresses
that error and makes the value as if it was not there.
Note that this cannot be done in the realtime driver, because the lack of
difference between NULL and 0 can only be intepreted correctly by the
driver itself. If we did it in the realtime driver, then it would be
effectively impossible to set any realtime field to 0, because it would act
as if the field were unspecified and possibly take on a different value.
(closes issue #16683)
Reported by: wdoekes
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Also includes a test for retrieving rtpqos parameters, including a NULL RTP
driver. Additionally, some further separation of the SIP internal API into
headers was necessary.
(closes issue #16652)
Reported by: kkm
Patches:
20100204__issue16652.diff.txt uploaded by tilghman (license 14)
Review: https://reviewboard.asterisk.org/r/501/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@247124 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Code Refactoring Changes
- read_to_parts() moved to reqresp_parser.c and has been renamed as
get_name_and_number()
- get_in_brackets() moved to reqresp_parser.c
- find_closing_quotes() added to sip_utils.h
Logic Changes
- get_name_and_number() now uses parse_uri() and get_calleridname()
for parsing. Before this change only names within quotes were
found, when names not within quotes are possible.
New Unit Tests
-sip_get_name_and_number_test
-sip_get_in_brackets_test
(closes issue #16707)
Reported by: Nick_Lewis
Patches:
issue16706.diff uploaded by dvossel (license 671)
Review: https://reviewboard.asterisk.org/r/499/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246627 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A patch was committed recently that converted duplicate uri parsing
code to use the parse_uri function. There were two instances where
this conversion did not mimic previous behavior exactly because the
port was not being parsed off the end of the domain. In order to do
this, a dummy pointer argument needs to be passed into parse_uri so
it will know it must parse out the port from the domain. If a port
output paramenter is not present, the domain is returned with the
port still attached.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@246420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This config option is already handled by the function handle_common_options
and it is unnecessary to parse the value again.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245230 65c4cc65-6c06-0410-ace0-fbb531ad65f3
First off, these options weren't actually doing anything.
By the time the options were parsed, the peer and dialog
containers had already been allocated with their default
values.
Second, hash table size is something that doesn't really
make sense to change in a config file. If a user is that
interested in changing the hashtable size, he can modify
the source itself.
I have removed the parsing of the hash_peer, hash_user,
and hash_dialog options. I have removed the hash_user_size
variable altogether since it is not used at all. I also
changed hash_peer_size and hash_dialog_size to be constant,
and have changed the symbols to be in all caps as constants
typically are. I have also removed the entire section in
sip.conf.sample regarding configurable hashtable sizes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@245192 65c4cc65-6c06-0410-ace0-fbb531ad65f3
default expiry was not being set correctly for a registry object.
Thanks to ebroad for reporting the issue and testing the patch.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244924 65c4cc65-6c06-0410-ace0-fbb531ad65f3
parse_moved_contact attempts to remove a quoted string
twice, and the first try wasn't even being done correctly.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244769 65c4cc65-6c06-0410-ace0-fbb531ad65f3
New files
- channels/sip/sip.h – A new header for shared #define, enum, and struct
definitions.
- channels/sip/include/sip_utils.h – sip util functions shared among
the all the sip APIs
- channels/sip/include/config_parser.h – sip config-parser API
- channels/sip/config_parser.c – Contains sip.conf parsing helper functions
with unit tests.
- channels/sip/include/reqresp_parser.h – sip request response parser API
- channels/sip/reqresp_parser.c – Contains sip request and response parsing
helper functions with unit tests.
New Unit Tests
- sip_parse_uri_test
- sip_parse_host_test
- sip_parse_register_line_test
Code Refactoring
- All reusable #define, enum, and struct definitions were moved out of chan_sip.c
into sip.h. During this process formatting changes were made to comments
in both sip.h and chan_sip.c in order to better adhere to the coding guidelines.
- The beginnings of three new sip APIs, sip-utils.h, config-parser.h,
reqresp-parser.h using existing chan_sip.c functions.
- parse_uri() and get_calleridname() were moved from chan_sip.c to request-parser.c
along with unit tests for both functions.
- sip_parse_host() and sip_parse_register_line() were moved from chan_sip.c to
config-parser.c along with unit tests for both functions.
Changes to parse_uri()
-removal of the options parameter. It was never used and did not behave correctly.
-additional check for [?header] field. When this field was present, the transport
type was not being set correctly.
----- Overview -----
This patch is introduced with the hope that unit tests for all our sip parsing
functions will be written soon. chan_sip is a huge file, and with the addition of
each unit test chan_sip is going to grow larger and harder to maintain. I'm proposing
we begin refactoring chan_sip, starting with the parsing functions. With each parsing
function we move into a separate helper file, a unit test should accompany it. I've
attempted to lay down the ground work for this change by creating two new parser
helper files (config-parser.c and reqresp-parser.c) and moving all shared structs,
enums, and defines from chan_sip.c into a shared sip.h file. We can't verify everything
in Asterisk using unit tests, but string parsing is one area where unit tests make
the most sense. By beginning to restructure the code in this way, chan_sip not only
becomes less bloated, but Asterisk as a whole will become more stable.
Review: https://reviewboard.asterisk.org/r/477/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@244597 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1. URI Encoding
This patch changes ast_uri_encode()'s behavior when doreserved is enabled.
Previously when doreserved was enabled only a small set of reserved
characters were encoded. This set was comprised primarily of the reserved
characters defined in RFC3261 section 25.1, but contained other characters as
well. Rather than only escaping the reserved set, doreserved now escapes
all characters not within the unreserved set as defined by RFC 3261 and
RFC 2396. Also, the 'doreserved' variable has been renamed to 'do_special_char'
in attempts to avoid confusion.
When doreserve is not enabled, the previous logic of only encoding the
characters <= 0X1F and > 0X7f remains, except for the '%' character, which
must always be encoded as it signifies a HEX escaped character during the decode
process.
2. URI Decoding: Break up URI before decode.
In chan_sip.c ast_uri_decode is called on the entire URI instead of it's
individual parts after it is parsed. This is not good as ast_uri_decode
can introduce special characters back into the URI which can mess up parsing.
This patch resolves this by not decoding a URI until parsing is completely
done. There are many instances where we check to see if pedantic checking
is enabled before we decode a URI. In these cases a new macro,
SIP_PEDANTIC_DECODE, is used on the individual parsed segments of the URI
rather than constantly putting if (pedantic) { decode() } checks everywhere
in the code. In the areas where ast_uri_decode is not dependent upon
pedantic checking this macro is not used, but decoding is still moved to
each individual part of the URI. The only behavior that should change from
this patch is the time at which decoding occurs.
Since I had to look over every place URI parsing occurs to create this
patch, I found several places where we use duplicate code for parsing.
To consolidate the code, those areas have updated to use the parse_uri()
function where possible.
3. SIP display-name decoding according to RFC3261 section 25.
To properly decode the display-name portion of a FROM header, chan_sip's
get_calleridname() function required a complete re-write. More information
about this change can be found in the comments at the beginning of this function.
4. Unit Tests.
Unit tests for ast_uri_encode, ast_uri_decode, and get_calleridname() have been
written. This involved the addition of the test_utils.c file for testing the
utils api.
(closes issue #16299)
Reported by: wdoekes
Patches:
astsvn-16299-get_calleridname.diff uploaded by wdoekes (license 717)
get_calleridname_rewrite.diff uploaded by dvossel (license 671)
Tested by: wdoekes, dvossel, Nick_Lewis
Review: https://reviewboard.asterisk.org/r/469/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@243200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #15819)
Reported by: klaus3000
Patches:
asterisk-sip-show-channelstats-trunk.txt uploaded by klaus3000 (license 65)
Tested by: klaus3000, oej
This patch is for trunk only and will be blocked in 1.6.2
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239663 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The code that handled setting 'm=text' in the sdp was not executing
in the correct order. The check to see if text was needed came after
the check to add 'm=text' to the sdp, this resulted in 'm=text' always
being set to 0 because it looked like text was never required.
(closes issue #16457)
Reported by: peterj
Patches:
textportinsdp.diff uploaded by peterj (license 951)
issue16457.diff uploaded by dvossel (license 671)
Tested by: peterj
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@239427 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Modified handle_verbose to be LOW_MEMORY aware, removed old RTP related code
in chan_sip.
(closes issue #16381)
Reported by: michael_iedema
Patches:
ast_complete_source_filename.patch uploaded by michael iedema (license 942)
modified by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236893 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r236062 | dvossel | 2009-12-22 10:58:19 -0600 (Tue, 22 Dec 2009) | 11 lines
fixes issue with p->method incorrectly set to ACK
It is possible for a second ACK to come in for a retransmitted message.
If an ack does not match an unacked message in our queue, restore the previous
p->method as this ACK is completely ignored.
(closes issue #16295)
Reported by: omolenkamp
Patches:
issue16295_v2.diff uploaded by dvossel (license 671)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@236063 65c4cc65-6c06-0410-ace0-fbb531ad65f3
A registration regression caused by a code tweak in (issue #14331)
and a bug fix in (issue #15539) caused some sip registration
config entries to be constructed incorrectly. Origially
issue #14331 contained the code tweak as well as a bug fix, but since
the issue was reported as a tweak the bug fix portion was moved into
issue #15539. Both the tweak and the bug fix contained minor incorrect
logic that resulted in some SIP registrations to fail.
(issue #14331)
(issue #15539)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@235132 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r234492 | oej | 2009-12-14 11:16:00 +0100 (Mån, 14 Dec 2009) | 8 lines
Stop sending 183's after call hangup.
There where still cases where the 183 keep-alive mechanism would not stop
sending 183's even though the Asterisk server had sent a final reply to
the invite.
EDVX-28
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@234526 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In the process of swapping ULAW to a place in the extended codec space, we
found several unhandled cases, where a 32-bit integer was still being used to
handle a codec field. Most of these have been fixed with this commit, although
there is at least one case (codec_dahdi) which depends upon outside headers to
be altered before a conversion can be made.
(Fixes AST-278, SWP-459)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231850 65c4cc65-6c06-0410-ace0-fbb531ad65f3
1) Allow users of UDPTL stack to associate a character-string tag with a UDPTL
session, so that log/error/debug messages generated by the UDPTL stack can
be 'connected' to the endpoint that caused them to be generated.
2) Improve comments (and process) of calculating the far end's maximum IFP size
when redundancy mode is in use for error correction.
3) When an IFP larger than the calculated 'far max IFP' size is presented for
writing, truncate it rather than putting in the buffer and allowing the buffer
to overflow; this will cause the ends to retrain to a lower bit rate that
produces IFPs of an appropriate size if possible, and if not possible, the
FAX transfer will fail completely. In these cases, it is due to the one endpoint
supplying a T38FaxMaxDatagram value that is improperly calculated and is
too low to be of use; we have configuration options available to override
this behavior.
4) Eliminate use of T38FaxMaxDatagram value in udptl.conf; it is no longer
needed.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@231692 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Internally the way T.38 is negotiated has changed and the option no longer
reflects a behavior that is valid. It will now look for a CNG tone on
received calls and if present send the call to the 'fax' extension. It is
then up to the application or channel to request the switch over to T.38.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@230881 65c4cc65-6c06-0410-ace0-fbb531ad65f3
